Improvement and Widening of Vetamukh to Abhaypur Chowk via Botling Plant Tiniali, North Guwahati College including construction of RCC Road Side drain cum footpath, cross drain etc. from Ch. 1800.00m to Ch. 2990.00m under SOPD(G) for the year 2019-20

Amount

Clearing and Grubbing Road Land .(Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable materials to beused or auctioned up to lead of 1000metres including removal and disposal of top organic soil not exceeding 150mm thickness. In Area of light jungle. By Manual means

Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material with in all lifts and lead upto 1000 meters

Excavation in Soil by Manual Means. (a)(Excavation for roadway in soil using manual means including loading in truck for carrying of cut earth to embankment site with all lifts and lead upto1000 metres.)

Removal of Unserviceable Soil with Disposal upto 1000 metres (Removal of unserviceable soil including excavation, loading and disposal upto 1000 metres lead but excluding replacement by suitable soil which shall be paid separately as per clause 305.)

Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table (300-2) (a), ( Including cost of testing of materials at site and laboratory as directed by the deptt.) (a) From Private land .

Inverted Choke (Construction of inverted choke by providing, laying, spreading and compacting screening B type/ coarse sand of specified grade in uniform layer on a prepared surface with motor grader and compacting with power roller etc)

Construction of granular sub-base by providing closed graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth vibratory roller to achieve the desired density, complete as per clause 401( including all lifts and leads) including cost of testing of materials at site and laboratory as directd by the department (ii) for grading II material

Water Bound Macadam : Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specifications including spreading in uniform thickness, hand packing, rolling with smooth wheeled vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/binding materials to fill up the interstices of coarse aggregate, watering and compacting to required density, ( including all leads and lifts) A. By manual means ( Using screening II. Grading no. II (c ) type B (11.2 mm agg.)

Water Bound Macadam : Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specifications including spreading in uniform thickness, hand packing, rolling with smooth wheeled vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/binding materials to fill up the interstices of coarse aggregate, watering and compacting to required density, ( including all leads and lifts) A. By manual means ( Using screening II. Grading no. III ( 45 mm to 22.4mm) (b ) type B (11.2 mm agg.)

Providing and applying primer coat with bitumen emulsion on prepared surface of granular base including clearing of road surface and spraying primer at he rate of 0.60 kg/sqm using mechanical means (including cosf of testinf of materials at site and laboratory as directed by the deptt.) B. Primer @ 1.00 kg per sqm (i)with bitumen emusion - css- 1h

Tack Coat : Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg/sqm, on the prepared bituminous granular surface cleaned with mechanical broom ( including cost of testing of materials at site and laboratory as directed by the department) (ii) With bitumen emulsion ( CR-1) (IS-8887-2004)

Providing and laying dense bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.0 to 4.5% by weight of total mix and filler transporting the hit mix to work site, laying with hydro static paver finisher with sensor control tothe required grade, level and aligment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoSRT & H cl. no. 507 complete in all respect (including carrieage up to intial lead of 5.0 km from quarry and carriage of mixed materials up to 10.0 km intial lead from mixing plant 9 including cost of testing of material at site and laboratory) A. With hydrated lime/cement as filler (a) With 60/70 or VG-30 grade bitumen (ii) For grading -II (19 mm nominal size)

Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 % of mix and filler transporting the hot mix to work site , laying with hydro static paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoSRT & H cl. no. 509 complete in all respect ( including carriage up to initial lead of 5.0 km from quarry and carriage of mixed materials up to 10.0 km initial lead form mixing plant ( Including cost of testing of material at site and laboratory) A. With hydrated lime/cement as filler, (a) With 60/70 or VG-30 grade bitumen (ii) For grading - II ( 13 mm nominal size)

Providing and laying Interlocking Concrete Block Pavement (ICBP) conforming to IS:15658-2006 including all lead and lift complete as per technical specification and as directed. 80mm thick interlocking precast blocks having compressive strength of 40N/sq.mm.

Providing and laying M-40 grade cement concrete Edge block/ Edge restraints complete as per Technical specification clause 1504.

Earth work in excavation for foundation of structures as per drawings and technical specifications, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material

Dry rubble Flooring, Construcytion of dry rubble flooring at cross drainage works for relatively less important works.

PCC 1:3:6 in Foundation (Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.)

Removal of Unserviceable Soil with Disposal upto 1000 metres (Removal of unserviceable soil including excavation, loading and disposal upto 1000 metres lead but excluding replacement by suitable soil which shall be paid separately as per clause 305.)

Supplying, fitting and placing TMT IS:1786 (fe 500) bar reinforcement in substructure complete as per drawing and Technical Specifications (b) TMT IS 1786 (fe500D) Secondary produceer ISI approved

Plain/Reinforced cement concrete, in sub structure complete as per drawing and technical specification and steel shuttering formwork. With Batching plant Transit mixer and Concrete pump RCC Grade M 20

Providing weep holes in Brick masonry/Plain/Reinforced concrete abutment, wing wall/return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical specification.

Back filling behind abutment , wing wall and return wall complete as per Drawing and technical specification. (B) Sandy Material

Earth work in excavation for foundation of structures as per drawings and technical specifications, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material

Dry rubble Flooring, Construcytion of dry rubble flooring at cross drainage works for relatively less important works.

PCC 1:3:6 in Foundation (Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.)

Removal of Unserviceable Soil with Disposal upto 1000 metres (Removal of unserviceable soil including excavation, loading and disposal upto 1000 metres lead but excluding replacement by suitable soil which shall be paid separately as per clause 305.)

Supplying, fitting and placing TMT IS:1786 (fe 500) bar reinforcement in substructure complete as per drawing and Technical Specifications (b) TMT IS 1786 (fe500D) Secondary produceer ISI approved

Plain/Reinforced cement concrete, in sub structure complete as per drawing and technical specification and steel shuttering formwork. With Batching plant Transit mixer and Concrete pump RCC Grade M 20

Providing weep holes in Brick masonry/Plain/Reinforced concrete abutment, wing wall/return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical specification.

Back filling behind abutment , wing wall and return wall complete as per Drawing and technical specification. (B) Sandy Material

Earth work in excavation for foundation of structures as per drawings and technical specifications, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material

Dry rubble Flooring, Construcytion of dry rubble flooring at cross drainage works for relatively less important works.

PCC 1:3:6 in Foundation (Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.)

Removal of Unserviceable Soil with Disposal upto 1000 metres (Removal of unserviceable soil including excavation, loading and disposal upto 1000 metres lead but excluding replacement by suitable soil which shall be paid separately as per clause 305.)

Supplying, fitting and placing TMT IS:1786 (fe 500) bar reinforcement in substructure complete as per drawing and Technical Specifications (b) TMT IS 1786 (fe500D) Secondary produceer ISI approved

Plain/Reinforced cement concrete, in sub structure complete as per drawing and technical specification and steel shuttering formwork. With Batching plant Transit mixer and Concrete pump RCC Grade M 20

Providing weep holes in Brick masonry/Plain/Reinforced concrete abutment, wing wall/return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical specification.

Back filling behind abutment , wing wall and return wall complete as per Drawing and technical specification. (B) Sandy Material

Earth work in excavation for foundation of structures as per drawings and technical specifications, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material

Dry rubble Flooring, Construcytion of dry rubble flooring at cross drainage works for relatively less important works.

PCC 1:3:6 in Foundation (Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.)

Removal of Unserviceable Soil with Disposal upto 1000 metres (Removal of unserviceable soil including excavation, loading and disposal upto 1000 metres lead but excluding replacement by suitable soil which shall be paid separately as per clause 305.)

Supplying, fitting and placing TMT IS:1786 (fe 500) bar reinforcement in substructure complete as per drawing and Technical Specifications (b) TMT IS 1786 (fe500D) Secondary produceer ISI approved

Plain/Reinforced cement concrete, in sub structure complete as per drawing and technical specification and steel shuttering formwork. With Batching plant Transit mixer and Concrete pump RCC Grade M 20

Providing weep holes in Brick masonry/Plain/Reinforced concrete abutment, wing wall/return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical specification.

Back filling behind abutment , wing wall and return wall complete as per Drawing and technical specification. (B) Sandy Material

Earth work in excavation for foundation of structures as per drawings and technical specifications, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material

Dry rubble Flooring, Construcytion of dry rubble flooring at cross drainage works for relatively less important works.

PCC 1:3:6 in Foundation (Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.)

Removal of Unserviceable Soil with Disposal upto 1000 metres (Removal of unserviceable soil including excavation, loading and disposal upto 1000 metres lead but excluding replacement by suitable soil which shall be paid separately as per clause 305.)

Supplying, fitting and placing TMT IS:1786 (fe 500) bar reinforcement in substructure complete as per drawing and Technical Specifications (b) TMT IS 1786 (fe500D) Secondary produceer ISI approved

Plain/Reinforced cement concrete, in sub structure complete as per drawing and technical specification and steel shuttering formwork. With Batching plant Transit mixer and Concrete pump RCC Grade M 20

Providing weep holes in Brick masonry/Plain/Reinforced concrete abutment, wing wall/return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical specification.

Back filling behind abutment , wing wall and return wall complete as per Drawing and technical specification. (B) Sandy Material

Providing and fixing of typical informatory sign board with logo as per MORD specifications and drawing. Three MS plates of 1.60 mm thick, top and middle plate duly welded with MS flat iron 25 mm X 5 mm size on back on edges. The lower plate will be welded with MS angle iron frame of 25mmX25mm X 5mm.. The angle iron grame of the lower most plate and flat iron frame of middle plate will be welded to 2 no.s 75mmX75mm of 12 SWG sheet tubes posts duly embaded in cement concrete M-15 grade blocks of 450mmX450mmX600 mm, 600 mm below ground level. The top most diamond plate will be welded to middle plate by 47mmX47mm of 12 SWG steel plate tube. All MS will be painted with ready mixed synthetic enamel paint and steel tube will be painted with primer and two coats of epoxy paint as per drawing clause 1701 and Annexure 1700.1

Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflectoriing glass beads as per IRC:35. The Finished surface to belevel, uniform and free from streaks and holes and conforming to the MoST&H Specification.

Providing reflective pavement marker with Micro prismatic lens in both direction having thermoplastic body adhering to the specification and guidelins of MoSRT & H's fixed to the road surface using the adhesives and the procedures recommended by the manufacturers with three months replacement warranty and free maintenance. Qty;

Providing and fixing of retro reflectorised causionary, mandatory and informatory sign as per IRC 67 made of encapsulated lens type reflective sheeting vide clauses 1701.2.3 fixed over aluminium sheeting 1.50 mm thick supported on GI pipe 50 mm dia firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 mmX450 mm X600 mm , 600 blow ground level as per drawing and Technical specification clause 1701. (ii) 60 cm equilateral triangle

Providing and fixing of retro reflectorised causionary, mandatory and informatory sign as per IRC 67 made of encapsulated lens type reflective sheeting vide clauses 1701.2.3 fixed over aluminium sheeting 1.50 mm thick supported on GI pipe 50 mm dia firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 mmX450 mm X600 mm , 600 blow ground level as per drawing and Technical specification clause 1701. (ii) 60 cm Circular

Painting Two Coats on New Concrete Surfaces' Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces

Earth work in excavation for foundation of structures as per drawings and technical specifications, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material

Dry rubble Flooring, Construcytion of dry rubble flooring at cross drainage works for relatively less important works.

Supplying, fitting and placing TMT IS:1786 (fe 500) bar reinforcement in substructure complete as per drawing and Technical Specifications (b) TMT IS 1786 (fe500D) Secondary produceer ISI approved

Plain/Reinforced cement concrete, in sub structure complete as per drawing and technical specification and steel shuttering formwork. With Batching plant Transit mixer and Concrete pump RCC Grade M 20

1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately) (A) 112mm thick brick wall (a) In cement mortar in proportion 1:4.

10 mm thick Cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level including arises or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed. b) In cement mortar 1:4

Planting of Trees and their Maintenance for one Year (Planting of trees by the road side (Avenue trees) in 0.60 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge mannure, planting the saplings, backfilling the trenches, watering , fixing the tree guatrd and maintaining the plants for one year.

Electrical Utility dismentling, Shifting and construction : (1) Shifting & Construction of 11 KV Line, LT Line & 11/0.4KV SUB-STATION ,Line Length (Composite)-0.6KM & 11/0.4 KV,250KVA.(Including storage charge, Labour charge, DTR fencing, Grouting of PSC pole, Contigency Charge, Supervision Charge & GST etc.). Supervision Charge to be paid directly to the APDCL by the bidder.

Electrical Utility dismentling, Shifting and construction : (2) Shifting & Construction of 33 KV line,Line Length (Composite)-2KM 33KV LINE. (Including storage charge, Labour charge, DTR fencing, Grouting of PSC pole, Grouting of Steel Tubular Pole, Contigency Charge, Supervision Charge & GST etc.). Supervision Charge to be paid directly to the APDCL by the bidder.

Electrical Utility dismentling, Shifting and construction : (3) Dismantling of 33 KV Line, 11 KV Line, LT Line ,Line Length (Composite)-2.5 KM. (Including storage & transportation charge, Labour charge, Contigency Charge, Supervision Charge & GST etc.). Supervision Charge to be paid directly to the APDCL by the bidder.

tapash paul