SPL REPAIR TO FENCING HARDSTANDING AND OTHER MISC WORK ASTRIDE CHILDREN PARKS AT NDA KHADAKWASLA

Amount

Dismantling security fencing wire any type (barbed wire, chain link fencing, GI mesh etc) complete all as specified and directed

Dismantling posts or struts (steel or RCC) embedded in concrete, any section, including taking out embedded portion and making good the disturbed surface complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

Suppy only MS Galvanised chain link fencing, 3 mm nominal dia of wire, average area of apperture 0.25 sqcm and/or weight of the fencing not less than 2.00 kg/sqm complete all as specified and diretced.

Fixing only MS galvanised chain link fencing, incl line wires any mesh, size and type to any type of standards, rails, straining bolts etc including provision of binding wire.complete all as specified and diretced.

M&L for 10 mm dia MS round bars cut to length bent to shape required etc..(to be used for stiffness to chain link) fixed indepdently to the angle iron post as directed by Engr-In-Charge. (Conforming to Fe 410w (Gde E-250) quality 'A' or Fe 290 (Gde E-165).complete all as specified and diretced.

S&F MS screw bolts (machine made 12 mm dia. Shank) with hexagonal or square heads at one end and screwed at another end, each screwed end to be fitted with washer and one hexagonal or square nut, exc. 5cm n. exc 10 cm in length. complete all as specified and diretced.

Supply and fixing in position angle iron posts for fencing posts and struts, split at bottom, cut to shape, including providing flat iron for securing wire mesh with necessary welding, drilling bolting or rivetting, complete all as spd and directed.(Steel confirming to Fe-290 (Gde E-165)) complete all as specified and directed

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of Precast cement concrete block/stone boulder walling built in CM or Cement lime Mortar omplete all as specified and directed.

M&L for precast cement concrete block masonry exc. 10 cm width with solid block C5 Grade and setting in cement mortar (1:6) complete all as specified and as directed

M&L for PCC (1:2:4) type B-0 (Using 12.5 mm graded stone aggregate) in coping, hold fast block including weathering slightly rounded and chamferred angle including necessary form work and finish of exposed surfaces of concrete as described in SSR Part-II) complete all as specified and directed.

M&L for rendering 10mm thick cement plaster in CM( 1:4)on block/stone walling surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for cement concrete Type D-2, (1:4:8) (using 40 mm size graded stone aggregate) as in foundation,Mass concreting filling and mass concrete complete all as specified and directed

M&L for cement concrete Type C-2, (1:3:6), (using 40 mm graded stone aggregate) as in foundation, Mass concreting filling and mass concrete complete all as specified and directed

M&L broken hard core gauge, n exc 63mm deposited spread and leveled in layers n.exc 15cm thick water and rolled/rammed true surfaces (for rising of path level) complete all as specified and directed

S&F framed work ornamental and intricate design such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165 including removing old structure complete all as specified and diretced.

M&L for running Welding in repairs and to make in original position of article in any length and thick of weld n exc 6 mm for gate, chainlink fencing ,fencing post and misc MS Items complete all as specified and directed.

M&L for preparation of newly plastered/ concrete wall surface and applying two coats of cement base paint over a coat of primer complete all as specified and directed

M&L for preparation of old plastered/concrete wall surface and applying two coat of cement base paint complete all as specified and directed.

M&L for preparation of new/Old untreated concrete surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of primer complete all as speicifed and directed.

S&F in repair of 3mm thick Aluminium composite panel (ACP) board of size 3' x 4' (n.exc 20 sqft) fixed on both sides( board shall be rectangular or pentagular shape).ACP board to be fixed on grid frame work with SS screws/ rivets, made of 20mm stainless steel square tube of 1.25 mm thick of SS 304 series and fixed on the perimeter of 40 mm dia stainless steel tube of 2mm thick of SS - 304 series. A 20 mm tube of 1.25mm thick of SS series 304 of 05 nos and 50mm long support to be provided to fix to 40mm thick frame. A grid frame to be provided in side 40mm thick frame of size 20mm square of 1.25mm thick not exe 600mm centre to centre on both ways to support the ACP boards. The board shall be sheated with high intensity retro reflective sheet of blue colour, computerised designed writting letter/figures in (Block, Roman, Italic style or in Indian languages where required)/ index hands (natural size)/ arrows/stops/ commas /short lines/ dashes/hyphens/ bracket, holograms etc where necessary shall be made high intensity reflective sheet with in white colour letter, shape and sizes as required and approved by GE. Letters not exc 200 nos on each face of the ACP Board. Each face to have a border line of 25mm wide with white colour high intensity retro reflective sheet/tape. The sign board to be supported on 2 Nos post of 60mm dia and 2.5mm to 3.0mm thick stainless steel pipe of SS - 304 series, exc 3m and not exceeding 4m in height with round moulded design cap on top. Pipes of the boards to be fixed in ground with PCC 1:2:4 type B2 (using 40mm graded stone aggregate) in post holes of sizes 45cmx45cmx75cm depth (post holes and concrete includes in the rates) complete all as specified and directed

Dismantling stone slab of any description or thickness in floors, approns etc, laid bedded & pointed in any mortar complete all as specified and directed

S&F for glossy finished chequered cement concrete tiles 30cmx30cmx20mm thick set jointed with grey cement and pigment and pointed in neat cement slurry including 20 mm thick screed bed of CM(1:6) in floors complete all as specified and directed

M&L for Providing and laying 60mm thick glossy finish factory made chamfered edge cement concrete paver block of M-25 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size / shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 30mm thick compacted bed of coarse sand/stone dust, compacting and proper embedding / laying of inter locking paver blocks into the sand/stone dust bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand, etc incl filetting to the edges in CM (1:4), all as per manufacturer's instruction complete all as specified and directed

M&L 50mm thick PCC (1:4:8) type D-2 (using 20mm graded aggregates) as in sub base complete all as specified and directed.

M&L for Providing and laying at factory made kerb stone/Road Guard stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. etc., and setting in CM (1:4) complete with joints to match complete including demolition of existing all as specified and directed.

Horizon Construction (BID ID -3329016)

Harish Enterprises (BID ID -3323886)

DARSHAN ENTERPRISES (BID ID -3328717)

AVS CONSTRUCTION (BID ID -3329369)

SUN Enterprises (BID ID -3328612)

Sarkar Enterprises (BID ID -3328639)

SANDHYA ENTERPRISES (BID ID -3328000)

A K ENTERPRISES (BID ID -3328310)

AMW Construction and developers (BID ID -3329505)

Imprint Digitech (BID ID -3329373)

Bharekar Construction (BID ID -3329560)