ward 17 nirichan bhavan gest house ke samne sarvjanik sauchalay ka nirman kary

Boring of 30 cmdia piles of single under reamed of 50cm dia of bulb and 3.5 meter depth in black cotton soil with hand operated auger machine including all laboure T&P etc. for proper completion of work as per IS code-2911(Part-III) 1980.

Excavation in foundation in ordinary soil ( Loam clay or sand) including lift up to 1.5 meter (5ft) and lead upto 30m (100ft) and including filling,watering & ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as direction by the Engineer-in-charge upto a distance of 30m(100ft) from the foundation trenches.

Coarse sand filling in plinth including supply of necessary quantity of coarse sand/moorum from the side of work & including watering ,dressing etc. Rate to include cost of all materials,labour and tools & plants,etc. required for proper completion of the work. (as per S.I. No. 255)

Cement concrete with 4cm (1/2'') gauge approved stone ballast, approved coarse sand. cement in the proportion 12:6:1 including supply of all materials,labour and tools and plants etc. required for proper completion of the work. (as per S.I. No. 273)

RCC work with cement approved coarse sand and 2cm. (3/4'') gauge approved stone ballast in the proportion 1:2:4 in lintels of doors and windows, excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.I wire.and including necessary cantering and suttering etc and also including supply of all materials,labour and tools and plants etc. required for proper completion of the work. binding wire to be supplied by the contractor free of cost.

Class-150 brick work in 1:6 cement and fine sand of 1.25 fineness modulus mortar in foundation and plinth including supply of all materials, labour and tools and plants etc. Required for proper completion of the work. (as per S.I. No. 303)

As in item (309) above but walls of one brick thick add for extra labour to the rate of item (309)

(a) As in item (309) above but walls of half brick 112mm (4½") thick add for extra labour to the rate of item (309)

Mild steel of iron in plain work such as reinforced concrete/ brick work (when not included in over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel, its wastage and hooks and authorised over lapping shall be measured. (as per S.I. No. 504)

12mm thick plaster with cement and fine sand in 1:4 including supply of all materials, labour and T&P etc. required for proper completion of the work (S.I.No. 584)

Finishing walls with water proof cement paint of approved make and quality on new work with two coats to give an even shade including supply of all materials, labour, tools and plants etc. required for proper completion of work.

Supply of MS angle iron door, window or ventilator frame made of approved MS angle iron wrought to required form including drilling holes, welding and reciting where necessary and also including supply of all material, such as steel hinges of required size nut bolts etc. and also including all taxes, wastage and one coat of red oxide paint as per direction of Engineer-in-charge for proper completion of work at site of work. (as per cht-10 Add new Item No. 2) For Gate+ Railing

Painting or Venishing new iron work in small areas or new wood work with one coat (up to one Sq. meter) of ready mixed priming paint and two coat of approved superior quality ready mixed paint or varnish including supply of all materials labour and tools and plants etc. required for proper completion of the work. Paint to be used should confirm the ISI no. 103-1950. (as per S.I. No. 641)

supply & Fixing of 10cm Internal dia Pvc down-pipes complete with rose- heads, bends abd gratings & including supply of necessary M.S. clamps 2.5cmx3mm (1"x1/8") fixed to walls, with & including supply of 15cm (6") long 6mm (1?4") dia nails & including supply of all materials, labour and T&P etc required for proper completion of the work and also including repair of plaster, pointing etc if damaged during fixing of pipes, details of 30' length.

Supply & fixing of sign board size 4'x3' etc. required for proper completion of the work.

Supply and fixing 6mm (1/4") China white glazed tiles in flooring or in skirting or dado laid with ratio 1:3 cement and approved coarse sand finished with white cement slurry, jointing and polishing complete, including supply of all material, labour and tool and plants etc. required for proper cpmpletion of the work.

Providing and fixing first quality indian type white glazed earthen ware ISI marked WC pan size 580 mm. (Hindustan, Ceta make) with 10 cm. PVC "P" trap of approved make with 10 litres low level flushing cistern (Hindustan, Sanitax, Ashoka make) ISI marked with syphon, brass fitting and GI chain pull, RS or CI Brackets, 32 mm. dia. GI flush pipe "B" class (2 m.) with brass unions etc. 32 mm. dia. PVC bend 32 mm. dia. PVC socket, 15 mm. dia. overflow pipe with specials and masquito proof couplings of approved minicipal design, 15 mm. dia. brass stop cock (400 gms.) plastic connection (1.5" x 1") with brass unions including supply of all materials, labour, T&P etc. required for proper completion of work and painting of cistern and fittings with approved paint, cutting and making good the walls and floors where required with cement sand and grit. The seat and trap shall have to be fixed over minimum 3" thick C.C. in proportion of 12:6:1 including supply of all materials labour, T&P etc. complete.

Providing and fixing flat back 465 mm. x 355 mm. x 265 mm. size lipped fron urinal basin of white glazed earthen ware 1st quality (Hindustan, Neyeer make) ISI marked with 5 litres CI automatic flushing cistern (Hindustan, Sanitax, Ashoka make) ISI marked with necessary fittings, RS or CI bracket standard size, 32 mm. dia. GI flush pipe "B" class with brass unions of fittings and GI waste pipe 25 mm. dia x 0.66 mm. complete including supply of all materials, labour and T&P etc. required for proper completion of the work including painting of cistern and fittings with approved paint, cutting and making good the wall and floors where required with cement sand and grit.

S/F of sanitary Instalation as Bib Cock angle Valve Pvc Connetion etc with all respect

Supply and fixing low density polythene tank sintex or equivalent.

S/F of electrification with walls,slab conduiting and other fixture as box fixing , chase cutting wiring fitting Connetion etc with all respect

Providing and fixing 550mmx400 mm. wash hand basin of white glazed earthen ware 1st quality ISI marked (Hindustan, Neyer, Cera make) with RS or CI brackets painted white, 15 mm. dia. CP brass pillar cock with CP metal handle (weigth not less than 400 gms.) ISI marked and 32 mm. dia. CP brass chain with rubber plug, 32 mm. dia. CP brass waste standard pattern with check nut 32 mm. dia. CP brass P or S trap and unions complete with PVC connection 0.50 size including supply of all required materials, labour, T&P etc. required materials labour, T&P etc. required for proper completion of work and including cutting and making good the walls and floor with cement, coarse sand and grit, fittings used should be of superior quality. (as per S.I. No. Sanitary Inst. cht-IV - 306)

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable methodprescribed in IS: 2800 (part I), including collecting samples from different strata,preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. DSR - 23.1.1.1

Supplying, assembling, lowering and fixing in vertical position in bore well,unplasticized 150 mm dia PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.DSR - 23.3.2

Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.DSR - 23.6

Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. DSR 23.12

1.5 HP 9 Stage Submersible Pump of ISI mark With automatic panel.

Providing and fixing 50 mm nominal dia Pipes Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.As per DSR No.-18.9. 6

Providing and fixing 50 mm nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end) :As per DSR No.-18.17. 4

Providing and fixing flat back 465 mm. x 355 mm. x 265 mm. size lipped fron urinal basin of white glazed earthen ware 1st quality (Hindustan, Neyeer make) ISI marked with 5 litres CI automatic flushing cistern (Hindustan, Sanitax, Ashoka make) ISI marked with necessary fittings, RS or CI bracket standard size, 32 mm. dia. GI flush pipe "B" class with brass unions of fittings and GI waste pipe 25 mm. dia x 0.66 mm. complete including supply of all materials, labour and T&P etc. required for proper completion of the work including painting of cistern and fittings with approved paint, cutting and making good the wall and floors where required with cement sand and grit.

S/F Of Sanitation With all materials Labours T&P fitting Connetion etc with all respect

Please Enable Macros to View BoQ information