SPECIAL REPAIRS TO CERTAIN BLDGS AT

Amount

Taking down cement or lime plaster of any description on bricks, stone and concrete surface of wall etc. including raking out joints, hacking for key, scrubbing down with water etc and rubbish off the premises, complete all as specified and directed.

M&L for rendering in two layers consist of 10 mm thick on fair faces of brick work or concrete surfaces for rough finish in cement mortar 1:6 and 5mm thick on fair faces of plastered surfaces in cement mortar 1:4 with water proofing compound (on top layer only) finished fair and even without using extra cement complete all as specified and as directed. Note : The water proofing compound shall be measured and paid seprately unde respective items only.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6, finished fair and even and smooth without using extra cement complete all as directed.

M&L for rendering 10mm thick on fair faces of concrete surfaces in ceilings in cement mortar 1:4, finished even and smooth without using extra cement complete all as directed.

M&L for preparation of new plastered surface and applying two coats of oil bound distemper, over and incl a layer of wall care putty to get even and smooth level finish on new plastered surface of internal wall, complete all as specified and as directed.

M&L for preparation of new plastered surface of walls and applying three coats of white wash, complete all as specified and as directed.

M&L for preperation of new plastered surface and applying three coats of white wash on newly plastered surfaces of ceiling, complete all as directed.

M&L for preparation of new plastered surface and applying two coat of cement based paint over and incl one coat of exterior grade cement based primer, complete all as specified and directed.

M&L for complete removal of existing treatment by brushing, washing, rubbing down, scraping, watering and applying two coats of oil bound distemper over and incl one layer of Birla/JK White wall care putty to get level and smooth surface on old plastered surface of internal wall, complete all as specified and as directed.

M&L for complete removal of existing treatment by brushing, washing, rubbing down, scraping, watering and applying two coat of weather proof exterior grade emulsion paint over and incl one coat of exterior grade cement based primer, complete all as specified and as directed.

M&L for complete removal of existing treatment by brushing, washing, rubbing down, scraping, watering and applying two coat of cement based paint on old plastered surface of external wall, complete all as specified and as directed.

M&L for preparation of old plastered surface of walls and applying one coat of white wash, complete all as specified and as directed.

M&L for preparation of surface by washing, rubbing down and stopping of distempered and painted surfaces of ceiling and applying one coat of distemper oil bound, complete all as specified and directed.

Demolition of brick work built in cement or lime mortar, complete all as directed.

M&L for brick work with fly ash lime bricks (FALB) conforming to IS 12894, old size brick, straight or curved on plan exc 6m mean radius built in cm (1:6), complete all as specified and directed.

M&L for brick work with fly ash lime bricks (FALB) conforming to IS 12894, old size brick, straight or curved on plan to any radius in half brick thick wall built in CM (1:4), complete all as specified and directed.

Demolition of cement concrete including terrazo flooring (un-reinforced) in ground floor and paving not exceeding 15cm thick (below or above ground level) built in cement mortar, and rubbish off the premises, complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and directed.

M&L for joint free, Digital Type Vitrified coloured tiles of size 600x600mm, 8 to 10 mm thick (square/rectangular), in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed. Make : Kajaria / Nitco / Jhonson / Orient.

All as per item No 19 here-in-above but on vertical surfaces such as skirting/dado over and including 10mm thick rendering in CM 1:4.

M&L for 75 mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base for hard standing, complete all as specified and directed.

M&L for joint free, ceramic coloured tiles of size 600x600mm, 8 to 10 mm thick (square/rectangular), in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed.

All as per item No 22 here-in-above but on vertical surfaces such as skirting/dado over and including 10mm thick rendering in CM 1:4.

M/L for semi skid ceramic color tiles of size 300x300mm, 7 to 8 mm thick (square / rectangular) as in flooring etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed/ bedding layer in CM (1:6) complete all as specified and as directed.

M&L for glazed ceramic coloured tiles of size 300x 450mm, 7 to 8 mm thick on vertical surface, such as in dado over and including 10 mm thick rendering in CM (1:4), complete all as specified and directed.

M&L for 25mm thich PCC 1:2:4 type B0 (using 12.5mm graded aggregate) as in levelling course, complete all as specified and directed.

M&L for machine cut Kota stone slab flooring 18-20 mm thick and laid over and incl 15mm thick screed bed in CM (1:6), set and jointed with grey cement slurry mixed with pigment to match the shade of the slab, with and including Cutting / Griding / mirror Polishing on Kota stone as per local trade practice, complete all as specified and directed.

All as per item No 27 here-in-above but on vertical surfaces such as skirting/dado over and including 10mm thick rendering in CM 1:4.

M&L for 16 - 18mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with and including moulding, rubbing & polishing, and laid over and incl 15mm thick screed bed in CM (1:6), complete all as specified and directed.

M&L 75 mm thick cement concrete type C2 1:3:6 (using 40 mm graded stone agg) as in plinth protection and path laid in panels, not more than 3.0 mtr in length, laid to slope 1:30 incl forming joints 10mm wide and duly filled with mastic bitumen (01 part bitumen mixed with 03 parts of sand) surface, complete all as specified and as directed. Note : The quoted rates are deemed to be inclusive of material against form work and joint fillings.

Taking down steel tubing with and incl connections, of 15 mm dia (bore), complete all specified and directed.

Taking down steel tubing with and incl connections, of 20 mm dia (bore), complete all specified and directed.

M&L for medium grade galvanised steel water tubing with and including all fittings and fixtures, fixed to wall or laid in floors for 15 mm bore, concealed or exposed, complete all as specified and directed. Make : Jindal / Prakash Surya/ Tata

M&L for medium grade galvanised steel water tubing with and including all fittings and fixtures, fixed to wall or laid in floors for 20 mm bore, concealed or exposed, complete all as specified and directed. Make : Jindal / Prakash Surya/ Tata

M&L for cutting chases, pinning in for concealed water tubing, not exc 10 cm girth and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc complete all as specified and directed.

S&F in replacement of 1st quality vitreous China white colour, wash hand basin, table top type, complete with and including necessary CP waste coupling of 32mm dia size, complete all as specified and directed. Make : Jaquar (Aria) / Hindware (Dove) / Cera (Cholena)

S&F in replacement of 1st quality vitreous china wash down water closet pan (European type WC), wall mounted type, white colour, including same make soft closing plastic water closet seat cover, including fixing bracket, nut, bolts, washer and other accessories, complete all as directed. Make : Jaquar (Aria) / Hindware (Modena) / Cera (Calico)

S&F in replacement of concealed type metropole flush valve, dual flow with exposed shut off provision & wall flange plate, 3.0/6.0 ltrs per flushing), suitable for 32 mm size inlet alongwith all accessories made of cast copper alloy, chromium plated, complete all as directed. Make : Jaguar (Cat No 1085) / Cera (CM 402) / Hindware

S&F in replacement of wash hand basin mixer, single lever, tall body type with 600 mm long braided hoses with out popup waste system made of cast copper alloy, chromium plated fancy type, suitable for 15 mm dia (bore) pipe, complete all specified and directed. Make : Jaquar (Fusion Series) or equivalent of Hindware / Cera.

S&F in replacement of wall mixer, concealed type, single lever Hi-flow Divertor type consisting of concealed mixer body, Exposed Operating Lever, Wall Flange (With Seals) & Button having provision for overhead Shower & spout outlet, made of cast copper alloy, chromium plated fancy type, complete all as directed. Make : Jaquar (Fusion Series) or equivalent of Hindware / Cera.

S&F in replacement of hand shower of 140mm dia size, round shape, single flow with air effect (ABS Body & Face Plate Chrome Plated) with rubit cleaning system fancy type with and incl 1.5 Mtr long flexible shower tube with nuts & wall hook, complete all as directed. Make : Jaquar / Hindware / Cera.

S&F in replacement of spout with button attachment for hand shower and wall flange, suitable for wall mixer, made of cast copper alloy, chromium plated fancy type, complete all specified and directed. Make : Hindware / Cera / Jaquar

S&F in replacement of bottle trap 32 mm size with 250 mm long wall connection pipe and wall flange made of cast copper alloy, chromium plated fancy type, complete all specified and directed. Make : Hindware / Cera / Parryware / Jaquar

S&F in replacement of two way bib cock with wall flange made of cast copper alloy, chromium plated fancy type, complete all as directed. Make : Jaquar (Fusion Series) or equivalent of Hindware / Cera.

S&F of handshower (health faucet) with 8 mm dia, 1.0 mtr long flexible tube, wall hook and wall flange made of cast copper alloy, chromium plated fancy type, complete all as directed. Make : Make : Hindware / Cera / Parryware / Jaquar.

S&F of towel ring round/square shape of suitable size made of cast copper alloy, chromium plated, complete all as directed. Make : Hindware / Cera / Jaquar

S&F of toilet roll holder with flap made of cast copper alloy, chromium plated, complete all as directed. Make: Hindware / Cera / Jaquar

S&F of PVC made multipurpose cabinet with front openable door of overall size 350 x 450 mm, complete all as specified and directed. Make - Prayag / Polytuff / Commander / Pearl

S&F of stainless steel Peg set having six hooks, fixed with steel screws to wall, complete all as directed.

S&F in replacement of corner glass shelf with bracket made of cast copper alloy, chromium plated, complete all as directed. Make : Hindware / Cera / Parryware / Jaquar

S&F of towel rail 600 mm long and wall bracket made of cast copper alloy, chromium plated, complete all as directed. Make : Hindware / Cera / Parryware / Jaquar

S&F in replacement of glass shelf assembly consisting of 5.5mm thick glass sheet shelf 12cm wide with chromium plated bracket guard and railing 60cm long with and incl all fixing accessories, complete all as specified and directed. Make : Hindware / Cera / Parryware / Jaquar

S&F in replacement of angular stop cock 15 mm dia with wall flange made of cast copper alloy, chromium plated fancy type, complete all as directed. Make : Hindware / Cera / Parryware / Jaquar

S&F in replacement of PVC connection 450mm x 15mm dia PTMT (PVC), complete all as directed. Make : Prayag/ Hindware / Cera / Parryware / Jaquar

S&F in replacement of SS grating of squre/round shape, overall size of 150x150mm with hinge type openable jali of 100 mm dia size with and incl fixing with CM to floor/nahani traps etc, complete all as directed. Make : Hindware / Cera / Parryware / Prayag

S&F of shower curtain, comprise of 8 mm thick toughened clear glass with and including chrome finished profiles, roller hangers, patch fittings, hinges, towel rod cum handrail etc with and incl all respective accessories, complete all as directed. Make : Dorma / Kich / Ozone / Jaquar

S&F of high pressure booster pump with 24 ltr capacity pressure tank, coupled with electric motor of capacity 0.93 HP, 230 volts, single phase, 50 Hz including connecting accessories of GI i.e. bend, nipple, socket, tee of requisite size etc including cutting of existing pipe complete all as directed. Make : Lubi / CG / V Gard / CRI / Leader

S&F in replacement of stainless steel sink, 1.00 mm thick for kitchen with plug, with and incl 40mm dia CP waste coupling, waste pipe of 750mm long, washers, cantilever brackets, connecting union etc overall approx size 550 mm x 450 mm with approx bowl size of 500 mm x 375 mm x 200 mm etc, complete all as directed. Make : Nirali / Prayag / Blue Star

S&F in replacement of 1st quality vitreous china wash hand basin, white, flat/angle back, size 550x400mm, complete including necessary cutting for and pinning in ends of brackets) with and including wall brackets, PVC waste pipe of 750mm long, CP waste coupling of 32mm dia size, complete all as specified and directed. Make : Hindware / Cera / Jaquar / Parryware.

S&F in replacement of 1st quality vitreous china squatting pan Orissa pattern of size 580x440 mm, white colour with integral foot rests water closet but exluding flushing cistern & flush pipe, duly fixed in cement concrete bedding and making good of floor surface, complete all as directed. Make : Hindware / Cera / Jaquar / Parryware.

M&L in replacement for 1st quality vitreous china ware European type WC with "P" or "S" type traps and same make plastic seat cover of white colour including flush pipe, fixing bolts etc and making good of the wall & floor surface, complete all as directed. Make : Hindware / Cera / Jaquar / Parryware.

S&F in replacement of 1st quality vitreous China white urinal flat back (Large size) with and incl CP waste coupling of suitable size, wall brackets, PVC waste pipe of 750mm long, cast copper alloy CP spreader union with discharge pipe duly connected to auto closing angle cock, complete with necessary fittings, complete all as directed. Make : Hindware (Cat No - 60002) / Cera (Cat No - 5001)/Parryware (Cat No - C0575) / Jaquar.

S&F in replacement of 10 ltr capacity PVC valve less symphonic action type flushing cistern, white, with inlet ball valve, float and handle with and including wall bracket, 32 mm dia PVC flush pipe and connected to squat pattern / pedestal pattern water closet, including all joints and making good to the wall & floor,complete all specified and directed. Make: Hindware / Cera / Pearl / Parryware / Prayag / Jaquar

S&F in replacement of wash basin pillar tap with out popup waste system made of cast copper alloy, chromium plated fancy type, suitable for 15 mm dia bore pipe, complete all as directed. Make : Hindware / Cera / Parryware / Jaquar.

S&F in replacement of bib cock, 15 mm dia with wall flange made of cast copper alloy, chromium plated, complete all as directed. Make : Hindware / Cera / Parryware / Jaquar

S&F in replacement of long body bib tap, 15 mm dia with wall flange made of cast copper alloy, chromium plated, complete all as directed. Make : Hindware / Cera / Parryware / Jaquar

S&F in replacement of Stop cock with long shank and cup (concealed type), 15mm dia with wall flange, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe / unions, complete all as directed. Make : Hindware / Cera / Parryware / Jaquar

S&F in replacement of overhead shower of dia 125 mm round shape single flow, ABS body chrome plated fancy type, with and incl swirl type shower arm of 20mm dia with wall flange made of cast copper alloy, chromium plated fancy type, complete all as directed. Make : Hindware / Cera / Parryware / Jaquar

S&F in replacement of self closing angular stop cock, push button type, 15 mm dia with wall flange made of cast copper alloy, chromium plated fancy type, suitable for urinal spreader union discharge pipe, complete all as directed. Make : Hindware / Cera / Parryware / Jaquar

Disconnecting water tank of any description of capacity 500 Ltr to 1000 Ltr and removing from site complete all as directed.

S&F of rotational moulded polyethylene cylindrical vertical with closed top water storage tank triple layered WHITE COLOUR 1000 Ltr capacity with connecting nipple, hoisted and fixed in position on new or existing foundation and making GI tubing inlet or outlet connection, complete all as specified and directed. Make : Sintex / Vectus / Supreme

S&F in replacement of 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in replacement of 20 mm dia of Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iorn pipe and fixed. (minium weight 20 mm-210 gms) etc, complete all as directed. Make : Prayag / Polytuff / Pearl

Taking down chowkhats with shutters (without taking off shutters from the frame) area not exceeding 1.5 Sqm each, and removing from site, complete all as specified and directed.

All as per item No 76 here-in-above but area exceeding 1.5 Sqm but not exceeding 4 Sqm each and removing from site, complete all as specified and directed.

M&L for 50 micron aluminium powder coated sliding window comprising of sliding runner of three way and three Nos sliding shutter; two sliding shutter for provn of 5.0 mm thick galss and one shutter for provn of SS wire cloth; with and incl joining cleats, glazing clips, rubber neoprene packing, flush type handles 01 Nos in each shutter, anodised aluminium snap beading, down push type locking arrangement in glass shutter, fixed with rawl plug, complete all as specified and directed. Note : The SS wire cloth & glass will be measured and seperately under respective items only.

M&L for 50 micron powder coated aluminium window and ventilator shutters, fixed type without sash bar, fabricated out of aluminium hallow square or rectangular section of required size weighing 0.55 Kg/m incl necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc and making suitable opening for fixing only of 200 mm size ventilator with and incl making good the surface, complete all as specified.

M&L for 50 micron powder coated aluminium door shutters, aluminium section for top rail and styles 85mm x 45mm x 2.0mm thick; bottom rail 100mm x 45mm x 2mm thick and lock rail 100mm x 45mmx 2.0mm thick incl necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, powder coated 100mm aluminum hinges 03 Nos in each door, powder coated 200mm aluminum tower bolts 01 No in each door, 06 lever mortise lock 100 mm size - 01 No, powder coated aluminum snap beading, screws etc, complete all as specified and directed.

S&F of single cylinder floor spring hydraulically regulated suitable for wooden/aluminium door of upto 60 Kg weight, with top and bottom SS pivot, having corrosion resistance galvanized steel housing, high grade cast iron mechanism body with SS cover plate, other parts made of MS, heavy duty, ISI marked, complete all as directed. Make : Godrej / Kich / Ozone / Safex / Harrison

M&L for 50 micron powder coating aluminium frame for doors with one or more rebates including joining cleat for fixing, complete all as specified and directed

S&F of aluminium Decco grill with 05 mm dia and 50 mm mesh size of design and pattern as approved by Engr-in-Charge, complete all as specified and directed.

S&F of glass, brown colour, tinted type, 5.0 mm thick, each panes not exc 0.5 sqm, suitable for aluminium window / door and similar work, complete all as specified.

S&F in replacement of stainless steel wire cloth 0.36 mm in nominal dia of wire average width of aperture 1.40 mm and fixed with steel beads to steel shutters or fixed with wooden beads to wooden joinery, complete all as specified and directed.

S&F of 3mm thick sheet glass ordinary quality glazing with oil putty or beads in square not exc 0.5 Sq mm in each pane complete all specified and directed.

S&F of 3mm thick figured glass pin headed glazing with oil putty or beads in square not exc 0.5 Sq mm in each pane complete all specified and directed.

M&L for cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in bed block for hold fast & filling in pressed steel door frame, complete all as specified and directed.

S&F of Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood coloured PVC sheet and edges, reinforced with MS square tube, as specified in SSR Part-II 2010 (Section 8, on Page no - 175), complete all as directed. Make : Rajshree / Sintex

S&F factory made solid PVC moulded door shutter 28 to 30mm thick (Stiles) with 2, 4 or 6 raised panel design with 2mm thick Wooden texture moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification and drawing, complete all as specified and directed. Make : Rajshree / Sintex

M&L for Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed etc, complete as specifed and directed.

M&L for 125x60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete as specifed and directed.

S&F of 35mm thick modular designer flush doors, solid core construction, with block board core and prelamination on both sides, complete all as specified and directed.

S&F for 30mm thick 2nd class Hard wood glazed and skelton shutters as in Doors, open rebated and prepare to receive glass, gauze etc (without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR Part-I section 8 clause 8.24 (a) complete all as directed.

S&F of 25mm thick flush shutter for cup board door/shelves, solid core construction with block board core and prelamination on both sides etc with and incl min 5 mm thick wooden beading fixed all around, complete all as specified and directed.

M&L for box type steel window with 80x40x1.25 m MS tubular frame with side hung shutters ( double shutter for glass and gauze) without sash bars jointed together with and incl grill using 12 mm square bar @ 10 cm C/C incl box type hinges with steel handle and steel pag stay complete glazing bars doweled and welded complete all as specified as directed. Note:- (a) The Glass / gauze shell be measured and paid separately. (b) Side hung Z-Section shutter shall be of size 20mm x 20mm x25mm and 3.0mm thick.

M&L for box type steel ventilator with 80x40x1.25mm MS tubular frame partly gauged with top hung shutter with and incl grill using 12mm square bars @ 10cm C/C incl box type hinges with steel handle and steel pag stay complete glazing bars dovetailed and welded complete all as specified as directed. Note:- (a) The Glass / gauze shell be measured and paid separately. (b) Top hung Z-Section shutter shall be of size 20mm x 20mm x25mm and 3.0mm thick.

M&L for mild steel angles, bars, flats etc, as in supports for hold fasts, pipe clamps, plain angle cleats for securing purlins, stay clamps incl nut & bolts (as required) and similar small articles confirming to Fe-290 Gde E-165, complete all as specified and directed.

S&F 100mm Butt hinges, medium weight, cold rolled mild steel, and fixed MS wood screws, complete all as specified and directed.

S&F of aluminium alloy anodized sliding door bolt 200mm length with hasp & staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, ISI Marked, complete all specified and directed. (Make : Ashish, Classic)

S&F of 150mm long barrel tower bolt aluminum anodized extruded section, ISI marked, fixed with cadmium plated screws, complete all as specified and directed. (Make : Ashish, Classic)

S&F of 200mm long barrel tower bolt aluminum anodized extruded section, ISI marked, fixed with cadmium plated screws, complete all as specified and directed. (Make : Ashish, Classic)

S&F of 150mm aluminum handle cast type anodized, ISI marked, complete all specified and directed. (Make : Ashish, Classic)

S&F of 300mm ordinary mild steel rat tail rod pattern springs including roller and roller plate, complete all as specified and directed

S&F of 150 mm door stopper of aluminium body with rubber shoe and tongue anodized fixed in floor, ISI marked, complete all specified and directed. (Make : Ashish, Classic)

S&F hasp and staples, safety type with aluminium anodised hinge pin including bolt to hinge plate and fixed with screws of length 100mm, complete all specified and directed. (Make : Ashish, Classic).

S&F of door seal 20 to 25 mm wide with GI Powder coated flap fixed to wodden doors with screws, complete all as directed.

M&L for preparing new surfaces of wood or wood based materials of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over and including a coat of pink primer complete all as directed.

M&L for preparing new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over and including a coat red oxide primer complete all as directed.

M&L for preperation of old surfaces of wood or wood base materials of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint complete all as directed.

M&L for preparing old steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as directed.

M&L for stainless steel curtain rod 25mm dia steel pipe, cutting into length as required at site with and incl SS end caps/lobs and SS wall mounting brackets, complete all as specified and directed.

Taking down eaves gutter and rain / waste water pipes including all fittings any size and pattern, complete all as specified and directed.

S&F of Ringfit PVC (SWR) pipe of 110 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end as self socketed with an integral groove to hold the rubber gasket, with and incl rubber tighten gaskets, ringfit sockets etc, complete pipe duly fixed to wall with necessary FI clamps, complete all as specified and directed.

S&F of PVC (SWR) pipe of 110 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end socketed, duly fixed with cement solvent etc, complete pipe duly laid in trenches or in floors, complete all as directed.

S&F of Ringfit PVC (SWR) pipe of 75 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end as self socketed with an integral groove to hold the rubber gasket, with and incl rubber tighten gaskets, ringfit sockets etc, complete pipe duly fixed to wall with necessary FI clamps, complete all as specified and directed.

S&F of Ringfit PVC (SWR) pipe of 75 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end socketed, duly fixed with cement solvent etc, complete pipe duly laid in trenches or in floors, complete all as directed.

S&F 110 mm bore PVC (SWR) bends of any radius, complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends of any radius, complete all as specified and directed.

S&F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal, complete all as specified and directed.

S&F 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal, complete all as specified and directed.

S&F PVC (SWR) vent cowl 75mm bore, jointing to waste pipe, complete all as specified and directed.

S&F PVC(SWR) vent cowl 110mm bore, jointing to waste pipe, complete all as specified and directed.

S&F PVC floor trap of 75 mm outlet, jointing to waste pipe, complete all as specified and directed.

S&F PVC Gully trap of 125/110 mm outlet, jointing to waste pipe with cement solvent, complete all as specified and directed.

Demolition of reinforced concrete in roof, floor (Other than ground floor), beam, chajjas and similar suspended work, complete all as directed.

M&L for reinforced concrete, 1:1.5:3 type B1 Using 20 mm graded stone agg as in shelves, deck slabs etc and similar works, complete all as directed.

Use and waste form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, cantilevers, shelves incl supports, overhangs etc, complete all as specified and directed.

M&L for TMT bar 8mm dia, cut to length, bent to shape as required including cranking bending spirally for hooping for columns, slab etc with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to as per SSR Pt-I, complete all as directed.

Dismantling of asbestos cement corrugated/semi corrugated sheet in roof covering, complete all as specified and directed.

Dismantling timber scantling 40 Sqcm and over in section in any position as in framed / unframed works such as roof purlins, rafters, fillets, ridges etc as in ceiling, complete all as specified and directed.

M&L for pre-painted 0.50mm thick Gavalume Aluminium Zinc coating GI based corrugated / semi corrugated / trapezoidal steel sheet of any colour having tensile strength 550 MPa and AZ 70 grade as in roof covering/cladding to walls, fixed with self tapping screws, complete all as specified and directed. Make : Jindal / Tata / Everest

S&F pre-painted Galvalume Aluminium Zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength 550 MPa and AZ 70 grade as in ridge of roof covering, fixed with self tapping screws, complete all as specified and directed. Make : Jindal / Tata / Everest

S&F of Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, Fe-410-W(Gde-E-250) quality-A, complete all as specified and directed.

M&L for MS framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; hold fast, hook and pintel hinges also fastening and fixing complete of Fe 410-W (Gde E250) quality-B, complete all as specified and directed.

Dismantling of ceiling boards of any description any thickness including cover fillets, complete all as specified and directed.

S&F of exposed frame false ceiling system with GI powder coated grid consisting of main T runner 15mm size, suspended at 1200mm C/C and cross T runner of 15mm size suspended at 600mm C/C supported by 2.5mm dia GI rod from roof / Slab incl wall/perimeter runner/channel of 15 mm size with interlocking arrangement, as required, for framing grid of suitable module size with and including 4mm thick pre-painted non asbestos fiber reinforced cement board (E-board), designer type of size approx 595x595mm, duly fixed in ceiling frame work, complete all as specified and directed. Make : Gyproc / V-Board / Everest

M&L for making designer cornices of 75 mm x 75 mm by POP and applying two or more coats of plastic emulsion paint to match colour with gypsum board false ceiling /wall etc, complete all as directed.

M&L for demolition of cement concrete of any description and in any position of WC’s/Bathroom etc in sunken portion area, removing demolished material completely and old waste pipe from sunken portion and cleaning the side/bottom surface of sunken floor with wire brush, complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:3 on fair faces of brick work and concrete surfaces duly mixed with liquid WPC @ 150 ml in 50 Kg of cement by weight, on vertical and bottom surface, complete all as specified and directed. Note :- The WPC will be measured and paid separately.

M&L for 25 mm thick PCC 1:2:4 type B0 (12.5mm grade stone aggregate) as in padding duly mixed with liquid WPC @ 150 ml in 50 Kg of cement by weight, complete all as specified and directed. Note :- The WPC will be measured and paid separately.

M&L for applying two coats of cement slurry consist of first layer of cement slurry with cement @ 0.488 Kg/Sqm duly mixed with acrylic based polymer modified cementation composite compound @ 0.253 Kg/Sqm, allowed for air curing for 04 Hrs; second layer of cement slurry with cement @ 0.242 Kg/Sqm duly mixed with acrylic based polymer modified cementation composite compound @ 0.126 Kg/Sqm, allowed for air curing for 04 Hrs; filling with water for ponding test for 48 Hrs for checking for leakage proofing, complete all as specified and directed.

M&L for PCC 1:5:10 type E2 (40mm grade stone aggregate) as in mass concrete, filling in two layers in sunken portion, complete all as specified and directed.

M&L for 50mm dia PVC pipe, medium grade, as in spout to drain out, in sunken portion, complete all as specified and directed.

Removing existing water proofing treatment by brushing with wire brush, cleaning of terracing by taking down cement concrete, existing plaster lime cova 80 to 100mm thick mud phuska/cement concrete/lime cova etc, cleaning of all foreign material such as fungus mass dust etc, roughing surface of corner to roof by wire brush complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in padding levelling, roof kerbs and similar work, complete all as directed.

M&L for 10mm thick rendering in CM 1:3 mixed with liquid water proofing solution @ 150ml in 50 Kg of Cement by weight, on roof surfaces when concrete become green, finished even and smooth without using extra cement, complete all as specified and directed. Note : The water proofing compound shall be measured and paid seprately unde respective items only.

M&L for water proofing treatment to roof slab with APP based modified polymeric membrane having thickness 3 mm weight not less than 3kg/Sqm with 100mm overlap laid as per manuacturer's instructions and taking down exsiting water proofing treatment, complete all as specified and directed by Engineer-in-Charge with following course of description, mentioned below :- (a) 1st coat applying bitumen primer confirming to IS-3384-1965 @ 0.40 Kg/Sqm to be applied on prepared roof surface till the surface is properly impregnated. (b) 2nd coat of bonding material using blown type bitumen conforming to IS-702 of grade 85/25 @ 1.20 Kg/Sqm (c) 3rd course of. laying of APP Based modified membrane described herein before with 100mm overlap in longitudinal direction and 100mm in transverse direction, all joints and changes in all direction should be covered covered with cement mortar (1:3) mixed with SBR latex @ 200ml per bag of cement and cured well before laying the membrane (d) Forth course of bounding material using blown grade bitumen 85/25 conforming to IS-702 @ 1.20 Kg Per Sqm. (e) Applying a coat of bituminious aluminium paint @ 0.20 Kg Per Sqm.

Supply only integral liquid water proofing compound, ISI Marked. Make : Dr Fixit LW + Professional or equivalent of Fosroc / Sika

Excavating in trenches not exceeding 1.50m wide and not exceeding 1.50m depth for foundation, drain, laying of cables/pipes/poles etc and for wells, cesspits, manhole, pier hole etc not exc 10 sqm on plan and not exc 1.50m in depth and getting out in any type of soil, complete all as specified and directed.

Returning, filling with excavated soil, including spreading, levelling, watering and well ramming in layers not exc 25 cm, complete all as specified and directed.

Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5 m above the starting point, complete all as specified and directed.

M&L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for drain pipes of 150 mm internal dia size, complete all as specified and directed.

Supplying laying and testing of SGSW (Salt glazed stoneware) drain pipe of 150 mm internal dia size, grade ‘A’ (ISI Marked), laid in trenches to level / gradient, jointed in CM 1:1 complete with collar and accessories (all as per manufacturer instructions), complete all as specified and directed.

M&L for precast manhole covers with plain faces using RCC 1:2:4 type B1 and set in CM 1:4 including formwork, complete all as specified and directed.

M&L for PCC 1:2:4 type B1 using 20mm graded aggregate as in coping, surface channels, benchings of manholes, suacer drain, haunching and the like including weathering, slightly rounded or chamfered angles and throating, finished fair and even, with and including neccessary form work, complete all as specified and directed.

Extra for forming fair finished channel or drain 30cm girth (inner girth) in cement concrete using extra cement incl forms, moulds, stopped end, etc., complete all as specified and directed.

M&L Hardcore (Broken stone) of guage not exc. 63 mm, deposited, spread and levelled in layers not exc. 15 cm thick, watered and rolled/rammed to a true surface, complete all as specified and directed.

M&L for 50 mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate as in hardstanding, finished even and smooth without using extra cement, complete all as specified and directed.

Taking down carefully alluminium / copper point wiring complete for light, fan, socket or power point etc with fittings fixtures such as ceiling rose, holders, electric fittings, switchs, sockets, aluminium conductor cable with and incl wooden batten or FR PVC conduit and its accessories such as wooden gutties, rawl plugs, GI screws, aluminium clips, nails etc complete and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing, OBD etc as required, complete all as specified and directed.

M&L for Point wiring with 1.5 Sqmm FRLS insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core, conforming to IS:694 along with one run of 1.5 Sqmm FRLS insulated copper conductor cable green in colour for continuous earthing drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories / junction boxes / inspection covers etc of suitable size but not less than 20mm, duly concealed in wall / floor etc including provision of pressed steel terminal box of thickness not less than 18 SWG, with earth dolly of suitable size, duly concealed in wall and covered with 3 mm thick phenolic laminated hylam sheet fixed with GI screws for mounting switches, sockets, fan regulator etc, with and incl cutting chasing and making good of wall surface, complete all as specified and directed for the following points :- Make of Conduit : AKG/ Atul/ Kalinga/ Precision/Modi; Make of Wire : Havells/ Polycab/ Finolex /RPG / V-GUARD /KEI Note : The cost of MS sunken box with 3 mm thick bakelite, laminated hylem sheet top cover is deemed to be included in quoted rate.

One light / fan / bell / buzzer / exhaust fan point controlled by 01 no, 5 Amps one way switch.

One socket outlet 3 pin, 5 Amps on same board, controlled by 01 no, 5 Amps one way switch.

One socket outlet 3 pin, 5 Amps on independent board, controlled by 01 no, 5 Amps one way switch.

All as per srl item No. 161 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for indpendent 15 Amp point.

S&F of Switch piano type, single pole, one way, 5 amps, 230 volts, complete all as specified and directed. Make : Havells (Rio) / SSK / Goldmedal / GM

S&F of Socket, two-in-one, 5 pin, 5 Amp, universal type, 230 volts, complete all as specified and directed. Make : Havells (Rio) / SSK / Goldmedal / GM

S&F of Switch piano type, single pole, one way, 15 amps, 230 volts, complete all as specified and directed. Make : Havells (Rio) / SSK / Goldmedal / GM

S&F of Socket, 6 pin, 5/15 Amp, multipurpose shutter type, 230 volts, complete all as specified and directed. Make : Havells (Rio) / SSK / Goldmedal / GM

S&F of Lamp holder, angular type, bakelite body, 230 volts, complete all as specified and directed. Make : Havells (Rio) / SSK / Goldmedal / GM

S&F of Ceiling rose, three terminals, bakelite body, 230 volts, complete all as specified and directed. Make : Havells (Rio) / SSK / Goldmedal / GM

S&F of 7 W White LED retrofit lamp B-22 holder base with polycarbonate diffuser and heat sink, complete all as specified and directed. Make : Havells / Bajaj / Wipro / Philips /Osram

M&L for circuit / submain wiring alongwith earth wire 2 runs x 4 sqmm + 1 run x 4 sqmm with FRLS insulated copper conductor, single core cable, duly drawn through & including concealed medium grade, ISI marked, non metallic PVC conduit of 20 mm dia size with and incl all conduit accessories & fittings / junction boxes / inspection covers etc, with and incl cutting chasing and making good of disturbed wall surface, complete all as specified and directed. Make of Conduit : AKG/ Atul/ Kalinga/Precision/Modi; Make of Wire : Havells/ Polycab/ Finolex /RPG / V-GUARD /KEI Note : Three run of 4.0 Sqmm wire and PVC conduit shall be measured as one unit length.

S&F of surface mounting LED tube light fitting, box type with CRCA sheet steel powder coated body pre-wired suitable for and including of 1x20/22Watt (4 feet) retrofit LED tube rod having PC body and connecting up with twisted three core flexible copper wire of 0.5 sqmm from ceiling rose to connector of fitting, complete all as specified and directed. Make : Havells / Bajaj / Wipro / Philips /Osram Note : The cost of retrofit type 20/22 Watt LED tube rod is deemed to be included in the quoted rate.

S&F of LED batten 9W/10W (2 Feet) complete with polycarbonate diffuser and built in with electronic driver including connecting up with twin core twisted flexible copper conductor form ceiling rose to connector of fitting complete all as specified and directed. Make : Havells / Bajaj / Wipro / Philips /Osram

S&F of bulk head fittings complete with deep drawn metal body duly powder coated with glass cover with and incl retrofit type LED Bulb of 10 Watt, complete with fixing on wall, complete all as specified and directed. Make : Havells / Wipro / Bajaj / Philips

S&F of exhaust fan of 300 mm sweep size with 04 Nos blade leafs, 70 W power consumption, 1300 to 1400 RPM, 100 % copper winding, heavy duty type, double ball bearing complete with and incl self closing MS louvers, mounted in suitable opening arrangement and suitable for operation on 230 volts single phase, 50 Hz, AC supply and fixed by using 4 Nos 50 mm long MS fasteners, nuts & washers and making all electric connection with three core PVC insulated, PVC sheathed copper conductor flexible cable of 0.5 Sqmm size, complete all as specified and directed. Note : 1. The cost of making hole in the existing wall and making good the disturbed surface of wall/ ceiling etc as required is deemed to be included in the quoted rate. 2. Make : Havells / CG / Bjaja / Usha / Almonard.

Supply and fix ventilating fan with plastic body with louvers, 250mm sweep, single phase, 230 volts, 50 Hz. complete all as specified and directed. Make : Bajaj / Havells / Usha / Crompton

S&F of modular MCB protected plug and socket board in sheet steel enclosure with 20A rated mini MCB and 20A rated 3 pin plug, 240 V, 50 Hz complete including cutting and chasing of wall surfaces for flush mounting of socket board and making good of wall surface, complete all as specified and directed. Make : Indo Asian / L&T / Havells

S&F of MCB distribution board, SPN, 8 way 230 Volt, made out of sheet steel, powder coated enclosure, double door type with IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting & chasing of wall surfaces for flush mounting of DB and making good of wall surface, complete all as specified and directed. Note : The MCBs shall be measured and paid separetely. Make : Indo Asian / L&T / Havells

S&F of MCB distribution board, SPN, 4 way 230 Volt, made out of sheet steel, powder coated enclosure, double door type with IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting & chasing of wall surfaces for flush mounting of DB and making good of wall surface, complete all as specified and directed. Note : The MCBs shall be measured and paid separetely. Make : Indo Asian / L&T / Havells

S&F of MCB, C Curve type, 10 kA, 40 Amp, SPN with over load and short circuit protection, complete all as directed. Make : Indo Asian / L&T / Havells

S&F of MCB, C Curve type, 10 kA, 6 to 32 Amp, Single Pole with over load and short circuit protection, complete all as directed. Make : Indo Asian / L&T / Havells

M&L for earthing complete with galvanised iron earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connecting to GI wire 4 dia mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel and earth wire protected by 15mm dia GI pipe medium grade, GI funnel with 20mm dia watering pipe, earthing connected to distribution board / earthing test point all as shown in electircal plate No. 3 of SSR Part-I(2009) and testing on completion, complete all as specified and directed. Note : The unit rate quoted shall also include for excavation, earth work in any type of soil, plain cement concrete PCC 1:3:6, Type C1 pit, 40mm thick RCC 1:2:4 mix type B1 cover reinforced with 8mm dia TMT bras @ 150mm C/C both ways, GI funnel with 20mm dia watering pipe, wire mesh, protection pipe, earth wire upto 7.50m long complete in addition to item No. 1(a) to (e) of preamble (Notes) under sub heading earthing, specified in SSR Part II.

M/s Jagdish Chandra Arora

S GOURAV PRAKASH ENTERPRISES

M/s P L Dixit

M/S NASIM AND CO.

M/S Nextage Construction

ADARSH ENTERPRISES

VK BHARGAVA

ARTISTIC BUILD CO