REPAIR TO JOINERY AND ROOF TREATMENT IN RV AREA AT AF STN PALAM UNDER GE AF PALAM, DELHI CANTT-10

Amount

Taking down chowkats or frames with shutters area not exceeding 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and as directed.

Taking down chowkats or frames with shutters area exceeding 1.5 Sqm but not exceeding 4 Sqm each (without taking off shutters from the frame) complete all as specified and as directed.

Taking down shutter of any discription area n. exc 1 Sqm each complete all as specified and as directed.

Taking down shutter of any discription area exc 1 Sqm and n exc 2 sqm each complete all as specified and as directed.

M&L for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC `C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, Pa+nelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stliles and rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification and drawing complete all as specified and as directed.

M&L for pressed steel frame for door with one rebated of size (105 x 60)mm with necessary fixing lugs, hinges, lock strike plate with and including back filling inside hollow section of chowkhat with PCC (1:2:4) tyype B0 (using 12.5mm graded stone aggregates) complete all as specified and as directed.

M&L for pressed steel frame for door with double rebated of size (125 x 60) mm with necessary fixing lugs, hinges, lock strike plate with and including back filling inside hollow section of chowkhat with PCC (1:2:4) tyype B0 (using 12.5mm graded stone aggregates) complete all as specified and as directed.

S&F 35mm thick factory made flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F for 35 mm thick 2nd class hard wood factory made glazed and skeleton shutters open rebated and prepared to receive glass or gauge etc divided into squares with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, provided with stiles and rails as specified in SSR Part-I Section-8 clause 8.20 (a) fixed to chowkats complete all as specified and as directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and and average width of aperture 1.40mm fixed with stainless steel wire staples complete all as specified and as directed.

S&F for powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. with and including making good of the opening, such as plastering and painting jambs, levelling and finishing complete all as specified and as directed.

S&F powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc.complete all as specified and as directed.

S&F aluminium powder coated three track sliding window with mosquito net two track for glass leaf sliding and one track for mesh leaf sliding outer frame weighing 0.699 Kg/m, (75x26) mm size equvalent Jindal model 20671, shutter plain of size (37.5x15)mm weighing 0.366 Kg/m, Section No 20690 Jindal), with powder coating of minimum thickness 50 micron with one or more rebates, sliding type without sash bars, 5mm thickness double tampered clear glass, rubber packing, snap beading screws, with horizontal sliding type with stainless steel mesh, frame, powder coated aluminium grill type AL 925 or equvalent grill, cutting in suitable size and fitting with screws and suitable beedings to aluminum window frame complete etc. with and including making good of the opening, such as plastering and painting jambs, levelling, neoprine packing alround and finishing complete all as specified and as directed.

S&F butt hinges 100mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and as directed.

S&F aluminium anodised barrel tower bolts of extruded section and fixed 150mm complete all as specified and as directed.

S&F aluminium anodised, barrel tower bolts of extruded section and fixed 125mm complete all as specified and as directed.

S & F cast type anodised aluminium handles of size 150 mm complete all as specified and as directed.

S&F 300mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy and fixed with screws complete all as specified and as directed.

S&F in repair floor door stopper of size 140 mm long aluminium body and tongue, anodized with hard drawn steel spring including cleats etc fixed to door complete all as specified and as directed.

M&L for preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S&F in repair factory made 18 mm (+0.7 mm ) thick celuka PVC ply of density 600 kg/cbm manufactured by an ISO 900-2008 certified company, one side prelaminated and other side plain 18 mm thick celuka PVC Ply for kitchen cabinet/ cupboard shutter complete all as specified and as directed.

S&F in repair factory made 18 mm (+0.7 mm ) thick celuka PVC ply of density 600 kg/cbm manufactured by an ISO 900-2008 certified company plain 18 mm thick celuka PVC Ply for shelves/partions/drawers complete all as specified and as directed.

S&F 100 mm size stainless steel handle complete all as specified and as directed.

S&F 50 mm magnaetic catches with brass body and striking plate including letting in as fixed complete all as specified and as directed.

S&F 50 mm size stainless steel piano hinges complete all as specified and as directed.

S&F 40 mm stainless steel knobs complete all as specified and as directed.

S&F stailess steel telescope channel of size 500mm complete all as specified and as directed.

S&F stainless steel thali basket fo size (550 x 600x 200)mm Grade -304 complete all as specified and directed.

S&F stainless steel basket fo size (550 x 600x 200)mm Grade -304 complete all as specified and directed.

Taking down of existing tarfelt and cement plaster of any description and thickness on roof top including flashing and junction of parapet and cleaning existing roof top surface by brooming, wire brushing including removing the debrish out of MOD land complete all as specified and as directed.

Dismantling of brick tiles single layer on roofs laid dry or with cement mortar complete all as specified and as directed.

Demolition of mud in roofs, any thickness including plastering & leeping (whether full or part) removal of debris at a distance exc 250m but not exc 500m and depositing where directed complete all as specified and as directed.

S&F in repair 500 litres capacity rotational moulded polyethene water storage tank (cylindrical vertical with closed top) three layered (white) hoisted and fixed in position complete all as specified and as directed.

S&F in repair 1000 litres capacity rotational moulded polyethene water storage tank (cylindrical vertical with closed top) three layered (white), hoisted and fixed in position complete all as specified and as directed.

S&F in repair 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed.

Disconnecting existing tanks of capacity exc 250 and n exc 500 ltr of PVC, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and as directed.

Disconnecting existing tanks of capacity exc 500 and n exc 1000 ltr of PVC, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections including cleaning for refixing complete all as specified and as directed.

Taking up or down 20 mm bore steel tubing and connections including cleaning for refixing complete all as specified and as directed.

Taking down cement plaster on brick or concrete wall surfaces etc including raking out joints, hacking for keys, scrubbing down with water etc. complete all as specified and as directed.

M&L for 15 mm thick rendering on walls brick/concrete surface in cement plaster (1:4) finished even and fair without using extra cement including liquid water proofing compount Dr. fixit or equivalent @ 200ml per bag of cement content or equvalent as the percentage as per concerned manufacturer instructions complete all as directed and approved by Engineer- in-Charge and GE complete all as specified and as directed. Note:- Liquid Water proofing Compound shall be measured and paid seprately.

M&L for PCC (1:2:4) type B0 (using 12.5mm graded stone aggregate) as in roof padding complete all as specified and as directed.

M&L for 15 mm thick rendering on concrete surface on roof in cement plaster (1:4), finished even and fair without using extra cement including liquid water proofing compount Dr. fixit or equivalent @ 200ml per bag of cement content or equvalent as the percentage as per concerned manufacturer instructions complete all as directed and approved by Engineer- in-Charge and GE complete all as specified and as directed. Note:- Liquid Water proofing Compound shall be measured and paid seprately.

Supply only liquid water proofing compound complete all as specified and as directed.

M&L for APP based modified pre fabricated five layer 3 mm thick and weighing not less than 3.6 Kg/Sqm water proofing membrane reinforced with polyester non woven fabric mat with 160 gm/Sqm black finished with compatible primer conforming to IS 3488 @ 0.30 Lit/ Sqm and bonding material 85/25 bitumen 1.2 Kg/Sqm before and after laying membrane laid by torch application side overlap of 75 mm and over lap of 100 mm longitudinally, at the junction of roof and parapet wall a grove of (20 x 20)mm shall be made at the height of 100mm and membrane shall be inserted and sealed with bituminous mastic joints/overlap shall be saled with hot bitumen 85/25 with and including two coats of water proofing aluminium paint on top of APP membrane shall be applied complete all as specified and as directed.

M&l for providing PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in coping to parapet wall/kerbs in roof with projection with and including necessary use and waste of form work etc complete all as specified and as directed.

Refixing 15mm bore old steel tubing and connections in new or old position on walls, ceiling, floors, etc complete all as specified and as directed.

Refixing 20mm bore old steel tubing and connections in new or old position on walls, ceiling, floors, etc complete all as specified and as directed.

S&F 15mm bore, medium grade, GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors and cutting holes n exc 100 sqcm superficial area chase, pinning in, making good to facings where required in pointing with cement mortar (1:3) for concealed water tubing complete all as specified and as directed.

S&F 20mm bore, medium grade, GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors and cutting holes n exc 100 sqcm superficial area chase, pinning in, making good to facings where required in pointing with cement mortar (1:3) for concealed water tubing complete all as specified and as directed.

S&F PVC (SWR) bends any radius, 110 mm bore complete all as specified and as directed.

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including suitable clamps after every one meter of interval complete all as specified and as directed.

S&F in repairs Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 20 mm bore complete all as specified and as directed.

DEV CONSTRUCTION

GIR RAJ BUILDERS

JAIPAL AND BROTHERS

VIJAY KUMAR GUPTA

SHYAM ENTERPRISES

Shiv Shankar Nirman Co.

RK TRADERS