Construction, Commissioning of Fecal Sludge Treatment Plant of Capacity 6 m3/day at Bundu Nagar Panchayat and Operation and Maintenance for 5 years

Amount

SUPPLYING WORKS

Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item-A)and disposal of excavated earth as obtained to a distance upto 50m, including all lifts, levelling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design , building specification and direction of E/I

Refilling with excavated earth Filling in foundation trenches & plinth in layers not exceeding 150mm thick, well watered, rammed, fully compacted & fine dressed with earth obtained from excavation of foundation within a lead of 50m & lift of 1.50m all complete as per buiding specification and direction of E/I

Embankment construction with material obtained from Borrow pits(construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading , grading to required slope and compacting to meet requirement of table 300-2). Rolling with vibratory roller

Soling Random rubble dry stone Kharanja (soling) under floor.

Plain Cement Concrete Providing PCC in nominal mix of 1:2:4 in foundation with approved quality of stone chips with 20mm to 6mm size graded and clean coarse sand of FM of 2.5 to 3 including screening , shuttering, mixing cement concrete & placing in position , striking, vibrating, curing, taxes & royalty all complete as per building specification & direction of Engineer in charge

Providing PCC in nominal mix of 1:3:6 in foundation with approved quality of stone chips with 20mm to 6mm size graded and clean coarse sand of FM of 2.5 to 3 including screening , shuttering, mixing cement concrete & placing in position , striking, vibrating, curing, taxes & royalty all complete as per building specification & direction of Engineer in charge

Providing PCC in nominal mix of 1:4:8 in foundation with approved quality of stone metal grade -III( with 50mm to 25mm) size and clean coarse sand of FM of 2.5 to 3 including screening , shuttering, mixing cement concrete & placing in position , striking, vibrating, curing, taxes & royalty all complete as per building specification & direction of Engineer in charge

Damp Proof Coarse Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size).

Reinforced Cement Concrete Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in M-25 is @ 330 kg/cum) All work upto plinth level

Providing and laying in position machine batched and machine mixed design mix M-30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in M-30 is @ 340 kg/cum)

Reinforcement Supplying, fitting & placing HYSD bar reinforcement in sub structure complete as per drawing and technical specification

Centering/Shuttering Centering and shuttering including strutting, propping etc. and removal of form for all heights Foundations, footings, bases of columns, etc. for mass concrete

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Columns, Pillars, Piers, Abutments, Posts and Struts

Suspended floors, roofs, landings, balconies and access platform

Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Random Rubble Masonry Providing random rubble stone masonry in CM 1:4 in foundation and plinth with hammer dressed stone of less than 0.03 cum in volume and clean coarse sand of FM 2 to 2.5 including cost of screening , raking out joints to 20mm depth , curing, taxes and royalty all complete as per building specification and direction of E/I

Brick Work Providing designation 75A brickwork in CM (1:4) in superstructure with approved quality of clean coarse sand of FM 2 to 2,5 including providing 10mm thick mortar joints , cost of screening, materials, scaffolding, raking out joints to 15mm depth curing, taxes and royalty all complete as building specification and direction of E/I

Honeycomb brick Honey-comb brick work 10 / 11.4 cm thick with common burnt clay bricks of class designation 7.5 in super structure above plinth level upto floor V level with cement mortar 1:4 (1 cement : 4 coarse sand).

Solid Block Masonry Providing and fixing up to floor five level precast cement concrete solid block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete. 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

Plastering Providing 19mm thick water proof cement plaster (1:3) with clean coarse sand of FM 1.5 with 5% cico or any other approved water proofing compound including screening, curing, with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I

Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of FM 1.5 with 5% cico or any other approved water proofing compound including screening, curing, with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I

Painting Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or sand paper , applying putty wherever required, scaffolding, washing of floors and taxes all complete as per building specification and direction of E/I

Waste Water Pipes Providing at site, lowering & laying in trenches, aligning & jointing of PVC-U pipes (SN 8) as per IS 15328 (amended up to date) and as per specifications with rubber rings with socket and spigot joint, (EPDM/SBR) for all depths for pipe length as per drawing and specification including hydraulic field testing (including the cost and conveyance of water to site for testing) and commissioning etc complete as directed by Engineer. Note : E/w to be measured and paid separately. 160mm nominal dia

160 mm dia U-PVC double/ single socketed 45/22.5/11.25° bend (class V, 10kg/sqcm) confirming to IS:7834

110mm nominal dia

110 mm dia U-PVC equal Tee (class III, 6kg/sqcm) confirming to IS:7834

110 mm dia U-PVC double/ single socketed 90° bend (class III, 6kg/sqcm) confirming to IS:7834

110mm nominal dia (perforated pipe)

160mm dia perforated pipe

Slotted cowl (terminal guard) 100 mm dia

160 X 110 mm dia U-PVC Reducer (class III, 6kg/sqcm) confirming to IS:7834

50mm dia pipe

50mm dia elbow

110 mm dia End Cap (class III, 6kg/sqcm) confirming to IS:7834

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete. 300 mm dia. R.C.C. pipe

Screens Wrought iron and mild steel welded work) (using angles, square bars, tees and channel grills, grating frames, gates and tree guards of any size and design etc. including cost of screens and welding rods or bolts and nuts complete fixed in position but without the cost of excavation and concrete for fixing which will be paid separately.

Filter Material Providing and laying of coarse aggregate size as below after washing & sieving to make it free from fines & dust. Stone Aggregate (Single size): 100 mm nominal size

Stone Aggregate (Single size) : 40 mm nominal size

Stone Aggregate (Single size) : 20 mm nominal size

Stone Aggregate (Single size) : 12.5 mm nominal size

Stone Aggregate (Single size) : 06 mm nominal size

Coarse sand (zone III)

Providing and laying Cinders as a Filter Material In AF as per the instruction given by the site engineer in charge.

Brick Bat Providing and laying of brick bats in DC as per the instruction given by engineer in charge

Plants Rhoeo spathacea 'Compacta‘ ( Oyster, Boat Lily)

Roofing Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/ m²

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1.00 mm thick with zinc coating not less than 275 gm/m²

Providing and laying of polycarbonate sheet 6mm thick of size 4X39ft & 7X39ft over structural steel work including fixing in position, labour charge for laying all complete, excluding GST

Providing and fixing chicken mesh in position including material, labour etc all complete as directed by engineer in charge at Rs 450 per mesh (189sqm)

Providing and laying of kota stone Kota stone slab 25mm thick (rough cheseled)

Cement Concrete Flooring Providing 50mm thick cement concrete flooring (1:2:4) with 20mm-6mm size graded stone chips finished with floating coat of neat cement in panels including cost of curing, finishing the surface smooth, taxes & royalty with all complete as per building specification and direction of E/I

Sanitary Fitting Supplying and fitting vitreous white glazed earthen ware wash hand basin of parry or Hindusthan or any other I.S.S. approved make supported on CI or R.S. brackets 32mm C.I brass waste, 15mm dia CI body brass spindle stop cock of approved quality of weight not less than 350 grams, 32mm PVC waste pipe 750mm long with brass coupling at one end and making plumber joints etc, all complete as per specification and direction of E/I

Supplying, fitting and fixing 40mm high vitreous white glazed earthen E.W.C with 'P' trap of parry hindusthan or any other approved I.S.S make including supplying and fixing 15 litres CI mosquito proof low down flushing cistern of approved make with complete fittings with C.I handle and R.S or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stop cock of approved quality weight not less than 450 grams 15mm P.V.C alkathene pipe 45cm long with brass coupling at both ends and white/black plastic solid state seal and lead of commander/cuckoo or other I.S.S make with hinges or screws etc painting pipe and cistern etc with 2 coats of approved paint over a coat of red oxide priming , all complete as per specification and direction of E/I. with 'P' trap, 12.5 lit low level C.I cistern

Water Supply Works Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 32mm dia CPVC pipes

Providing and fixing of 15mm dia brass bib Cock water tap

Doors & Windows Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners,all necessary fittings complete, including applying a priming coat of approved steel primer.Using flats 30x6mm for diagonal braces and central cross piece.

Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Ladder Providing, fabricating and erecting MS ladder of 450mm wide made of 65 x 65 x 6mm angle iron and 20mm MS bars for walkway to top of the room including cutting, hoistng, fixing in position and applying a priming coat of approved steel primer complete in all respect as per specifications and the direction of the Engineer.

Water Storage Tank Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Kitchen slab Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all. Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble.Area of slab over 0.50 sqm

Furniture at office room 5'X3' office table with 4 drawer and 1 cabinet

Office revolving chair 18"X21" capsule medium back type

Nilkamal brand plastic chair model no. rosa

Office cupboard size 78"X19"X35"

Gate at entrance Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Weep Holes Providing weep holes in brick masonry/plain/reinforced concrete abutment, wing wall/ return wall with 100mm dia AC pipe, extending through the full width of the structurewith slope of 1V:20H towards drawing face complete as per drawing and technical specification

Kerb Stones Brick edging in full brick width and half brick depth including excavation, refilling and disposal of surplus earth lead upto 50 metres. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

White washing three coats over new surface with approved quality of lime including cost of cleaning surface thoroughly and removing the scales of smoke and mosh marks with jhama rubbing, scaffolding, washing of floors and taxes all complete as per building specification and direction of E/I

Cast in situ cement concrete M20 kerb( construction of cement concrete kerb with top and bottom width 115 and 165mm respectively, 250mm high in M20 grade PCC on M10 grade foundation 150mm thick , foundation having 50mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually , all complete as per clause 408)

Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or sand paper , applying putty wherever required, scaffolding, washing of floors and taxes all complete as per building specification and direction of E/I

Pumps 0.5 HP wastewater pump. Capacity 1-5 m3/hr @ 10 m (exclusive GST) at CT

Polishing pond. 0.5 HP wastewater pump. Capacity 1-5 m3/hr @ 10 m (exclusive GST)

2HP Single Phase 20 Stage Pump for Bore Well

Street Light Supply of Solar Street Light With pole 5 mtr.,Battery 40ah, Panel 100wat.,Wire, Led Light 12wat (excluding GST)

Sign Board Direction and Place Identification signs with size more than 0.9 sqm size board. (Providing and erecting direction and place identification retro reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting,2mm thick with area exceeding0.9 sqm supported on a mild steel angle iron post 75mm*75mm*6mm, 2nos fimly fixed to the ground by means of properly designed foundationwith M15 grade cement concrete 45cm*45cm*60cm below ground level as per approved drawing

Borewell Works Conduct Hydrogeological investication to determine the most probably spot for bore hole to obtain water. The scientific investication is to be carried in the pressence and in the directions of the engineer and using specialised resistivity measuring instruments.

Construction of Tube-well upto 100 Meter depth and above in all type of rocks by DTH system and over burden to accommodate casing pipe of following sizes in all types of soils and over burden including lowering of casing pipes,excluding the cost of casing pipes as per IS : 2800 (Part I & II) 1979 specifications. The work would be completed after obtaining sand free water and as per direction of the engineer. The tube well should have a throughout bore as per nominal dia of casing pipe:150 mm dia nominal bore

Supply of ERW M.S black casing pipe ISI marked (IS: 4270/1992) of grade Fe410 of following nominal bore sizes at site of work - 150 mm diameter

Supply of strainer pipes made of ERW M.S. black pipe ISI mark of following sizes at the site of work including required size of slotting as per IS: 8110 -1985 of following nominal bore sizes at site of work. Nominal bore dia: 150 mm

Testing verticality of tube well by plumbing system and yeild test and draw down test by pumping system as per IS: 2800 ( part II) 1979

Supply and fixing of tube well cover of M.S sheet( 6 mm thick) with nuts and bolts complete for casing size of 150 mm dia

Supply and fixing of MS clamp set of 50 x 6 mm flat iron with nuts and bolts etc for holding the riser pipe assembly of submersible pump set

Installation of submersible motor pump set in tube well complete (labour charges only) including transportation of tripod, pulley block, and any other material required for lowering purpose

Providing and lowering of GI flange pipe B class including rubber washer and nuts of 8 mm dis complete in all respect - 50 mm dia

Fire exitinguisher set of 3 (Including transportation, excluding taxes)

Prefabricated BGD including cost of transportation

Electrical Work Ceiling fan 120mm

4*40 watt patty type single tubelight fitting

36/40 Watt tube light.

Recess mounting LED round down light 12 W

G.I. Earth pipe electrode with salt/charcoal: earthing with GI earth pipe 4.5 mtr long,40mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc with charcoal and salt as required.

Point wiring in PVC conduit, with piano type switch:- Wiring for light point/fan point/ exhaust fan point/ call bell point with 1.5 sq mm FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, with piano type switch, phenolic laminated sheet,suitable size PVC/GI box etc. Group C.

S.P 5/6 amps, one way modular switch , ISI marked.

S/F Piano type switch socket:- Supplying and fixing of following piano type switch /socket on the existing switch box cover including connections etc as required. Electronic step fan regulator,deluxe

P & F 18 SWG Sheet steel boxes duly finished with two coats of red oxide and with earthing terminal of following sizes (nominal size) on surface or in recessed as required. Size: 150 x 75 x 60 mm

S/F 'C' series, MCB:- Supplying and fixing following, 240 volts, 'C' series, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc as required. 40 amps,SPN

2.5 sq mm ISI marked, FR MS PVC insulated, single core copper conductor cable

New electricity connection in category of HTS (Double shift industries) 11 KV

Power Backup Technical Specifications of 5 KVA Mahindra Powerol DG Set Model No. KD441-GSI2(Excluding GST)

Flexible Pavement & Walkway Subgrade Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres.

Granular Sub base Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed material to work site, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401. for grading - III material

Wet Mix Macadam Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechnical plant carriage of mixed material by tipper to site , for all leads & lifts, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. with smooth 3 wheeled steel roller

Bituminous Macadam Providing and laying bituminous macadam with 100-120 TPH hot mix plant producing an average output of 75 tonnes per hour using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site , laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction. for grading I (40mm nominal size)

Bituminous Concrete Providing and laying bituminous macadam with 100-120 TPH hot mix plant producing an average output of 75 tonnes per hour using crushed stone aggregates of specified grading premixed with bituminous binder@ 5.4 to 5.6% of mix and filler, transporting the hot mix to site , laying with a hydrostatic paver finsher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory & tandom rollers to achieve the desired compaction as per MORTH specification clause No 509 complete in all respects. for grading -I (13mm nominal size)

Walkway Making bajri path including preparation of subgrade, supplying and laying brick aggregate of 50 mm nominal size 7.5 cm deep with blinding material consisting of 12 mm moorum and 12 mm red bajri consolidated with road roller

First(1st) Year

Second(2nd) Year

Third(3rd) Year

Fourth(4th) Year

Fifth(5th) Year

M/S M C JAIN

Tide Technocrats Private Limited