SUPPLY OF ECM LAB EQUIPMENTS

SUPPLY OF ELECTRICAL MACHINES AND CIRCUITS LAB EQUIPMENTS

DC COMPOUND MOTOR WITH PRONY BRAKE ARRANGEMENT DC Compound Motor: Power : 5 HP Voltage : 220 V DC Current : 19 A Speed : 1500 RPM Poles : 4 With Prony brake loading arrangement, consisting of Strong MS holding frame with rear supports, Sturdy base for fitment of motor, 2 Sets of 1” Screw Rods, 6” dia adjusting wheels – 2 nos. Loading Arrangement : Mechanical Rope with Aluminum Loading Adjustable wheels 2 No’s 0-50 kg Spring Balance 2 No’s 4 point starter Electrical Panel Digital Ammeter DC(0-20A)— 01No Digital Voltmeter DC(0-300V)—01No Supply Indicator ------------------01No 2 Pole MCB ------------------01 No Fuses-------------------------------- 02No’s Digital RPM indicator with proximately sensor –01 No Necessary 30A Terminal 5 X 1¼ feet Brown color hylem sheet with circuit white color Engraving Work Bench Size 5feet×3.2Feet ×3.8Feet Ht (Including Engravo board Height) 2 x 1½’’ MS Power Coated leg Top ¾’’inch Plywood Back side wiring box closed Front 2 x 1½ feet Drawer Table Finished on High quality MS power coated

DC SERIES MOTOR WITH PRONY BRAKE ARRANGEMENT DC Series Motor: Power : 5 HP Voltage : 220 V DC Current : 19 A Speed : 1500 RPM Poles : 4 With Prony brake loading arrangement, consisting of Strong MS holding frame with rear supports, Sturdy base for fitment of motor, 2 Sets of 1” Screw Rods, 6” dia adjusting wheels – 2 nos. Loading Arrangement : Mechanical Rope with Aluminum Loading Adjustable wheels 2 No’s 0-50 kg Spring Balance 2 No’s 2 point starter Electrical Panel Digital Ammeter DC(0-20A)— 01No Digital Voltmeter DC(0-300V)—01No Supply Indicator ------------------01No 2 Pole MCB ------------------01 No Fuses-------------------------------- 02No’s Digital RPM indicator with proximately sensor –01 No  Necessary 30A Terminal  5 X 1¼ feet Brown color hylem sheet with circuit white color Engraving Work Bench  Size 5feet×3.2Feet ×3.8Feet Ht (Including Engravo board Height)  2 x 1½’’ MS Power Coated leg  Top ¾’’inch Plywood  Back side wiring box closed  Front 2 x 1½ feet Drawer  Table Finished on High quality MS power coated

AC MAINS PANEL 200 Amps Input Main Ac Main Panel with 2 x 100 Amps split distribution with necessary Fuse and Circuit breaker arrangement. AC DISTRIBUTION PANEL AC panel each 32 A of 18 ways with MCB output contains ammeter, voltmeter, bus bar arrangement , 18 SWG baser frame of indoor cubical type arrangement. DC DISTRIBUTION PANEL DC Panel Each 32 A Of 18 Way with MCB Output Contains Ammeters , Voltmeters Bus Bar Arrangement With 18 SWG Base Frame Of Indoor Cubical Type Arrangement

DC Rectifier Unit 100 Amps. Specification : • Input Voltage : 440V AC ,3 Phase • Output Voltage: 0 -220 V DC Variable with Potentiometer • Output Current :0 – 100 Amps • Rectifier SCR Based Electronics Drive Enclosed in MS Fabricated, powder coated Self standing Control Panel • Protections for Negative Phase sequence • Over current, Short circuit, Under voltage, over voltage provided with a/m, v/m, lamps, ON/OFF push buttons & potentiometer. • Single Phase Preventer for Input Protection. • Three Phase Auto Transformer for Automatic operation • Step UP Isolation Transformer For Input 380V / 400V/ 415V • Manual / Auto Operation providing Toggle Switch • Over Load / Short Circuit Indication in Front Panel. With Necessary Switches and O/p Terminals.

AC Portable Ammeter 0 – 1A/2A Portable housed in bakelite Case, with Pointer & Anti Parallax Mirror Scale of 140 mm Length CL-1 Accuracy : 1%

AC Portable Ammeter 0 – 5A/10A Portable housed in bakelite Case, with Pointer & Anti Parallax Mirror Scale of 140 mm Length CL-1 Accuracy : 1%

AC Portable Ammeter 0 – 10A/15A Portable housed in bakelite Case, with Pointer & Anti Parallax Mirror Scale of 140 mm Length CL-1 Accuracy : 1%

AC Portable Voltmeter 0 – 300V/600V Portable housed in bakelite Case, with Pointer & Anti Parallax Mirror Scale of 140 mm Length CL-1 Accuracy : 1%

Rheostat 100 Ohm / 5Amps with Backlit Stand and Kanthal Wound Cement tube

Rheostat 600 Ohm / 2Amps with Backlit Stand and Kanthal Wound Cement tube .

Rheostat 400 Ohm / 1.1Amps.with Bakelite Stand and Kanthal Wound Cement tube.

Displacement measurement using LVDT. Displacement Measurement module comprises of LVDT with micrometer jig fitted on the base plate to give displacement to the core of LVDT. Digital 3½ digit indicator is supplied to read the displacement in mm Specification: LVDT Range : : ± 10.0mm, (0-20mm) Indicator : 3½ digit to read upto ±1999C Zero Adjustment Cal : Front panel through POT. Sensitivity: 0.1 mm System Inaccuracy: 1% Repeatability: 1% Connection : Through 6 core shielded cable with Din connector. 230V ±10%@50Hz. Micrometer(0-25mm)mounted on a base plate to conduct Experiment Necessary cables provided. Power Accessories

Portable LPF Wattmeter 0 – 150/300/600V; /2.5A/5A/10A Portable housed in bakelite Case, with Pointer & Anti Parallax Mirror Scale of 140 mm Length CL-1 Accuracy : 1%

Portable UPF Wattmeter 0 – 150/300/600V; 5/10A Portable housed in bakelite Case, with Pointer & Anti Parallax Mirror Scale of 140 mm Length CL-1 Accuracy : 1%

SUN TECH INSTRUMENTS

J-Tech Instruments

SR INSTRUMENTS

SENTHUR ENGINEERINGS

MICROTRONIX SYSTEM SOLUTIONS