Repair and Renovation of Khanauri Rest House including boundary wall

Amount

Dismantling cement conglomerate floors (25mm to 50mm) thick including concrete base.

Dismantling cement conglomerate floors (25mm to 50mm) thick without concrete base.

Scraping White wash and colour wash etc.

Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two coats to get required finish.

Applying Priming coat with cement primer in all shades on newly plastered or conc surface

Wall painting with plastic emulsion paint of approved brand to give an even shade 2 coats

Finishing walls with acralic smooth exterior paint of reqdshade with 2 or more coatsapplied @ 1.67kg/10sqm over and incl. base coat of water proofing cement paint @ 2.20kg/10sqm

P & applying Anti termite treatment using post constructional chemical treatment using chemical containg choloropyrifos systemic insecticide diluted & injecting with chemical solution

Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate 40mm gauge and 100mm fine sand filling using mechanical mixer for mixing of material

Providing a vitrified floor tiles 600x600mm size premium quality, manufactured using Double charge Technology, with water absorption less than 0.08% and conforming to IS: 15622 of approved make in all colours and shades,

Grouting the joints of flooring tiles having joints of 3mm width, using Epoxy grout mix of 0.70 kg oforganic coated filler of desired shade 0.10kg of hardener and 0.20 kg of resin incl filling and finishing complete.

Providing and fixing 10mm thick acid and/or alkali resistant tiles 300 mm x 300 mm of approved make and colour using acid and/or alkali resisting mortar bedding and joints filled with acid and/or alkali resisting cement as per IS : 4457 complete as per the direction of Engineer-in- Charge, in flooring or in dado / skirting on a bed of 12 mm thick mortar 1 : 4 (1 acid proof cement: 4 coarse sand).

Black Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone,including rubbing and polishing including labour for fixing dowel pins and cramps.

Extra cost for projected nosing of any shape and design

Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS :15622 (thickness to be specified by the manufacture of approved make in all colours,shades except burgundy, bottle green, black of size 600 x 300 mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement:4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete

Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.

Reinforced cement cocrete M-20 mechanically batch mixed using Batch type concrete mixer and vibrated by needle vibrator but excluding steel reinforcement, centering and shuttering in superstructure.

Cold twisted deformed (ribbed/ tor steel) Bars Fe 500 grade, for R.C.C. works where not included in the complete rate of R.C.C. including bending, binding, and placing in position complete.

Providing and fixing mineral fibre false ceiling tiles at all heights With 16 mm thick beveled tegular mineral fibre Anti-microbial false ceiling tile of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflection > 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K,Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge

Stripping & stacking tiles of roof Main building roof

Dismentelling brick or flagged stone flooring without conc base

e/w excavation with kassi work undressed invovolving horizontal throw & vertival lift incl. breaking of clods

Scrapping mud plaster

washing conc. surface scrubbing with brushes incl. preparing & laying slurry

Nicking cement concrete surface (over 28 days old incl preparing and laying slurry

Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another laver of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg/sqm top of RCC slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing etc.

Cement concrete 1:2:4 gola 10 cm x 10 cm quardrant type

Making Top khurra 0.6x0.6m for rain water pipe in 25mm th cement cion 1:2:4 over 50mmth cement conc 1:8:16

Bottom khurra on ground 1.2m x 0.6m consisting of bricks laid in CM 1:3 over 7.5 cm cement conc 1:8:16 incl 12.5 mm th cement plaster 1:30.6x0.6m for rain water pipe in 25mm th cement cion 1:2:4 over 50mmth cement conc 1:8:16

Providing and fixing 110mm dia UPVC Rain water pipes incl jointing complete

Providing and fixing 110mm dia UPVC Bend for Rain water pipes incl jointing complete

Providing and fixing 110mm dia UPVC coupling/sockets for Rain water pipes incl jointing complete

Dismentelling/Removing door windows with chowkhats by making access in walls

Dismentelling wire gauge with frame work

Making openings in bk masonary incl dismentelling, fixing chowkhats for door chowkhats

Making openings in bk masonary incl dismentelling, fixing chowkhats for window chowkhats

Making openings in bk masonary incl dismentelling, fixing chowkhats for clerestory window (vents)

chowkhats of commercial hard wood such as Assam champ Double rebate ( 150mmx60mm)

chowkhats of commercial hard wood such as Cheetah champ(Assam) Single Rebate ( 100mmx60mm)

Cheetah Champ Assam wood door shutters/ window shitters 35mm th. Pannalled, glazzed or glazzed and pannalled

Wire gauge Cheetah Champ assam wood door/ window shutters 35mm th.

Cheetah champ assam cup board shutters withplywood pannalles or faces on both sides 30mm thick

Wire gauge fixed on chowkhats with 25mm thick Cheetah assam champ wood cover moulding

Teak wood planking planed on both sides 30mm thick

Teak wood plain lining on and PVC plugs

Stainless steel pipes for window grills 22.22 mm outer dia pipes

Iron gratted doors,incl pintle hinges and arrangments

Providing &Fixing glass panes with nails & putty or wooden strip complete in all respect 5mm thick

Cost of alluminium fittigs complete for doors,windows, such as tower bolts, handles, stoppers, screws etc

Providing & fixing aluminium sliding door bolts ISI marked anodized transparent or dyed to required color or shade with nuts & screws 300x16mm

Providing & fixing bright finished brass 100mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc complete

Providing & fixing Hydralic door closer ISI marked with necessary screws etc complete ISI designation no. III (size of door 851mm to 1000mm)

Curtain rods 25mm dia aluminium pipe with brackets fixed in position including nails & screws (teak wood)

Providing & fixing special quality bright finished Brass cup board or wardrobe locks with four levers of approved quality including necesary screws etc complete in all respect 75mm

Providing & fixing Stainless steel ball bearing hinges of size 100x 89 x 3mm ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge.

Providing & Fixing 0.5mm th aluminium sheet including cost of necessary fittings i.e screws etc complete

Providing and fixing MS of Double action spring hinges with necessary screws etc complete 125mm

Prepration of plywood surface for painting including sand papering the surface & applying filling with approved quality fillers consisting of white lead,linseed oil,varnish, & chalk mitti including the finsinhing the surface to required finish complete

Applying pink primer or aluminium priming coat on wood work including preparation of surface knotting & stopping etc

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work,mettalic pr plastered,concrete surface to give an even shade

Providing & fixing 14 gauge MS sheet garrage door with 40mm x 40mm x 6mm angle iron frames with diagonal braces 3.15mm gusset plate including locking arrangement with handles etc complete in all respect

Dismentelling brick work in cement

Providing & Fixing in position mirror of superior glass Size 1500mm x600mm or any other required size (of approved quality) and of required shape and size with high quality polystyrene moulding frame of 40 to 50mm size (of approved quality and shade) with 4mm thick hardboard backing fixed in with rawl plugs 50mm, C.P. brass screws and washers complete in all respect

Providing & Fixing 1'-3" stainless steel handles ISI marked on doors & window frames complete in all respect as per the directions of engineer in charge

Providing and fixing commercial plywood 12 mm thick

Providing & Fixing decorative high pressure laminated sheet 1mm (1 Star) thick with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.

Iron Fitting ISI Marked hinges 100 mm

Iron Fitting ISI Marked tower bolts 150 mm

Iron Fitting ISI Marked Sliding bolts 200 mm

Providing & fixing Stainless steel ball bearing hinges of size 100x 89 x 3mm ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge.

Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitered cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealent shall be paid separately). Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. (Area of Door upto 2 sqm

Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitered cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single/ double glass panes and silicon sealant shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension on higher side shall be accepted but no extra payment on this account shall be made. (a) Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.)

Earth work in excavation for storage and sedimentation tanks and disposal of surplus land as directed upto 15 mtr complete in all respect. Depth upto 1.5 m B.G.L For Ordinary gravel soil having gravel upto 40%

Boring with casing pipe for tubewell in all

Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS:12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.

Providing and fixing commercial plywood 18mm thick

Providing and fixing commercial plywood 25mmmm thick

Providing & fixing 6" stainless steel handles ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge.

Melamine polish two or more coats to give required finish including one coat of wood

Prepration of subgrade and compaction of earth

Cement concrete 1:4:8 with 40mm gauge stone aggregates in foundation

Providing and laying factory made rubber moulded smooth finish cement conc. Kerb M-20 grade 250mm high with bottom woidth 165mm and top width 115mm made over strong vibratory table and fixinf with cement morter 1:2

Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M- 35 grade manufactured by block making machine equipped with steel moulded clamped to a strong vibratory table with hyrdaulic pressure for compaction of conccrete as per IRC SP 63-2014 & of approved size and design / shape laid in Ordinary Grey Colour and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete

Extra cost for using darken fast shade for interlocking pavers of any shape & thickness instead of ordinary gray colours.

Preparation of plastered or concrete surface

Painting two coats with synthetic enamel paints in all shades on newwood work or metallic surface t.

First class burnt brick work laid in cement sand mortar 1:4 in foundation & plinth level

Horizontal DPC 40mm th

First class burnt brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level.

12.5mm th cement plaster in CM 1:4

20mm th cement plaster in CM 1:4

Providing and fixing CPVC pipe CPVC SDR 11 Pipe and fittings 25mm o/d

Providing and fixing CPVC pipe CPVC SDR 11 Pipe and fittings 40mm o/d

Providing & Fixing and jointing brass ball valves screwed with Ss/BRASS ball & spindle & teflon seats on GI pipelines including carriages complete Ball Valve 25mm dia

Providing & Fixing and jointing brass ball valves screwed with Ss/BRASS ball & spindle & teflon seats on GI pipelines including carriages complete Ball Valve 40mm dia

Providing & Fixing and jointing GI Union Coupling as per IS 1879 in in GI pipes lines 25mm dia

Providing & Fixing and jointing GI Union Coupling as per IS 1879 in in GI pipes lines 40mm dia

Cutting holes up to 23 cm square through brick work in cement wall Through 22.86 cm thick

Cutting holes up to 23 cm square through brick work in cement wall Through 45.72 cm thick

Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes lines and making good the same to its original condition.

Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 ( 150mm thick) in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside R.C.C. inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design IC 600mmx900mm

Making connection with existing GI brach main upto 40mm size pipe including cutting of existing pipe line,threading of pipelines from both ends and fixing of GI tee etc in pipeline (including cost of GI tee)

Providing & fixing 560 mm, 500 mm and 450mm internal diametre circular or 450 mm x 600 mm clear inside opening rectangular RCC manhole cover and frame ISI marked as per IS:12592-2002 including carriage from the stores of the Engineer-in-charge to site of work, loading, unloading including stacking and setting the same to correct lines over manholes including cement concrete copping (M:20) around the frame etc. Dia of steel for lifting hook is 16mm. (for EHD and HD). 560mm i/d RCC man hole cover & frame

Providing, laying in trenches to correct gradient and alignment and jointing of UPVC pipes having ISI specification IS:15328-2003 class-SN-8 marked make Supreme, Finolex, Kissan, Jain, Prince or equivalent good on them and laying the same in trenches to correct alignment and gradients, cutting and jointing, testing for water tightness and making good the leakages and defects including cost of specials (Specials and Solvent should be of same make as that of pipes) complete in all respects 160mm o/d

Making soak pit 2.5 m outer Diametre 3.0 metre deep 230mm thick 1:5 brick work honey comb with bricks of Ist Class and S.W. drain pipe 100 mm Diametre, 1.8 m long complete as per standard design

Constructing brick masonry manhole in cement mortar 1:5 ( 1 cement : 5 coarse sand ) R.C.C. top slab 20cm thick using M-20 mix by using mixer and vibrator, TMT Fe500 @ 80.00 kg/per cum, foundation concrete 1:4:8 mix (1 cement: 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making 40mm thick benching in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, Orange coloured PVC steps including RCC cover with frame complete as per standard design complete in all respects. inside size 90x150cm and 120cm deep

Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement: 2 coarse sand :4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:2 (1 cement : 2 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete. pipes 100 to 250 mm dia

Providing and fixing in position vitreous china ware white lavatory suits of approved make including brasstuds without CP fittings size 630mmx500mm

Providing and fixing in position vitreous china ware white lavatory suits of approved make including brasstuds without CP fittings size 630x500 mm above counter oval

Providing and fixing in position premium range C.P. Brass Fittings and accessories of approved make (to the approval of Engineer-incharge ) complete in all respect. C.P brass Sink mixer with swinging spout.(wall mounted)

Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect 32mm dia

Providing and fixing divertors of appd make for bath shower system complete in all respects single lever concealed divertor for bath and shower system.

Providing and fixing in position Chinaware Floor mounted European type one pieceEWC with matching cistern with P or S trap (to the approval of the Engineer-in-charge) with seat cover complete in all respect and to the entire satisfaction of engineer in charge. floor mounted EWCsize 69x36x74 cm

Providing and fixing PVC accessory fittings for dual flush Chinaware flushing cistern 10 Litres capacity complete.

Providing and fixing jet spray with 2'-6" long PVC pipe. With C.P. Brass nut

Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) size 5'x2' or any other size

Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) size 600mm x 450mm

Providing & Fixing in postion 15 mm i/d bib cock of best quality (as approved by the Engineer-in-charge).

Providing & fixing in position best Indian make PVC flexible tube connection. PVC tube connection of size 15 mm x 450 mm with C.P. Brass nut

Providing & Fixing in position C.P. Brass flange under various fixtures complete in all respects (as required by the Engineer-in- Charge)

Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect. C.P.brass 15mm Concealed stop cock with flange.

Providing & Fixing in postion stop cock / Angle valve (as approved by the Engineer-in-charge). C.P.brass 15mm Concealed stop cock with flange.

Providing and fixing in position best Indian make C.P brass basin mixer complete instead of piller tap.

Providing and fixing in position gratings 150mm x 150mm for gully trap.

Providing and fixing in position premium range C P brass fittings and accessories of approved make complete in all respects. C P brass towel bracket 610 mm long

Providing and fixing in position best Indian make over head shower 1 flow with shower arm 15 or i/d Inlet of approved make complete in all respects.

Providing and fixing in position best Indian make soap dish fixed into wall with rawl plugs and C.P brass screws and complete in all respects ..

Providing and fixing in position towel rails / ring fixed in with rawl plugs embedded in walls with brass screws, complete in all respects including cutting and making good the walls etc. C.P brass towel ring

Providing and fixing in position premium range C P brass fittings and accessories of approved make complete in all respects. C P brass toilet paper holder

Providing and fixing in position SWR UPVC soil waste vent pipe or anti syphonage pipe 110 mm OD laid complete.

Providing and fixing in position HCI specials for soil waste vent or anti syphonage pipe to specifications .

cement concrete 1:2:4 with stone aggregate 20 mm size.

Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the approval of Engineer-incharge )with various fixtures complete in all respect. C.P. Brass extension piece, 25mm long to 50mm long

Providing & fixing in position Gully traps fixed in cement conc. 1:4:8 complete with grating 150mmx150mm cover & frame clear opening 300mmx300mm and outer side 330mmx330mm and chamber incl cost of brick work in CM 1:5 cement concrete 1:2:4 in coping around cover & frame complete

Providing & Fixing in postion liquid soap container of approved make (to the approval of Engineer-in-charge ) complete in all respect Acrylic liquid soap container

Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining.For 110mm o/d pipes P Trap/Floor Trap 110mm x 110mm

Providing and fixing Stainless steel health faucet complete in all respect

Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -incharge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. Tripple layer tank

Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-incharge) in PVC Water storage tanks complete in all respect. 25mm dia GI tank nipple

Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-incharge) in PVC Water storage tanks complete in all respect 40mm dia GI tank nipple

Providing and fixing in position automatic brass Ball Cock in tanks. Plastic Ball Cock with rod and Plastic Ball 25mm dia

Providing and fixing in position C.P. Acrylic shelf with C.P.bracket and guard rails of approved make (to the approval of Engineer-incharge ) fixed in with rawl plugs and C.P brass screws complete in all respect. C.P. brass Glass Corner with rail 8 mm thickness and height 250 mm

Providing & fixing in position stainless steel rectangular sink with deluxe border Double bowl overall size1114mmx490mmand bowl size460x385x200mm of approved make with waste coupling complete.

Providing & fixing in position C.P brass Sink mixer swinging spout (table mounted) with 450mm long flexible hose of approved make (to the approval of Engineer-in-charge) complete in all respect.

Providing and fixing in position C.P. Brass Urinal button flusher 15 mm of approved make (to the approval of Engineer-in-charge) 15mm

Providing and fixing in position vitreous Chinaware white lIndian make large flat back or angular lipped front urinal 375 x 390 x 590 mm of approved make (to the approval of the Engineer-in-charge) consisting of C.P. brass Urinal waste Coupling dome type 32mm outer length 75 mm , C.P. brass Urinal Spreader Ocular-Regular and C.P. brass tube connection 300 mm long complete.

Providing and fixing C.P. brass Urinal Spreader Ocular-Regular complete with fittings for urinals complete.

Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100 volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes( 1.6 mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined / universal Socket (shuttered), 6/10Amp. Switches,16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), PVC Bush, Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), CI Circular junction Boxes (Four way 1½" deep for walls and 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100 volts grade (For 6Amp. wall socket & plug control point) and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):- Wiring fan point (With fan box)

Wiring light point

wiring call bell point

Wiring 3 pin 6Amp. wall socket point

Wiring 3 pin 6Amp. power plug control wall socket point

Wiring 3 pin 16/20Amp. power plug control point

Wiring light point with double control switches.

Wiring air conditioner supply terminal point recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 25Amp. combined/ universal Socket (shuttered) and modular motor starter 25Amp. (2Module), covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):- Wiring AC supply terminal point having 1No. 25Amp. universal Socket (shuttered) erected at AC height and 1No. Motor starter 25Amp. erected at switchboard height.

Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 1.0 sq.mm (Un-sheathed)

Overall size 1.5 sq.mm (Un-sheathed)

Overall size 4.0 sq.mm (Un-sheathed)

Overall size 2.5sq.mm (Un-sheathed)

Supply and erection of PVC insulated PVC sheathed FR (2Core) round flexible wire with copper conductor cable (ISI marked) confirm to IS:694/1990 left bare in pipe or on surface with cleats of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 2.5sq.mm (50/0.25mm), 2Core

Overall size 4.0 sq.mm (84/0.25mm), 2Core

Supply and erection of PVC insulated PVC sheathed FR (3Core) round flexible wire with copper conductor cable (ISI marked) confirm to IS:694/1990 left bare in pipe or on surface with cleats of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 4.0 sq.mm (56/0.3mm), 3Core

Supply & erection of PVC Conduit Pipes(ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:- Heavy Gauge PVC Conduit Pipe 25mm dia. (On Surface)

Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications includingconnections with suitable size of thimbles/lugs:- MCB Double Pole 6-32amp. (10kA, CurveC)

MCB Double pole Pole 50,63amp. (10kA, Curve-C)

Supply and erection of RCBO (Residual Current Breaker Overload) for Earth leakage, overload and short circuit protection suitable for 240/415 volts 50 cycles AC supply with breaking capacity of 10kA as per IEC 61009 in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- RCBO Double Pole 32amp., Sensitivity 30mA

Supply and erection of sheet metal Double Door Distribution Boards IP 43-IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars,earth bars, cement spill protector, colorcoded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:- TP&N Double Door Distribution Board 12 way each

Providing and fixing in postion storage type automatic electric water heater pressure type thermostatically controlled, single phase wall mounted of approved make (to the approval of Engineer-in-charge) with thermostats, inner container of stainless steel, Inner glass lining with B-Rating minimum 3 stars complete with 1 Mtr. three core flexible cord with plug, non return valve and pressure release valve complete including fixing and testing complete in all respect. 25 ltr capacity

Supply and erection of Single phase copper wound Automatic voltage stablizer of suitable capacity electronically controlled circuit with input voltage 140-260 volts single phase AC supply and output voltage 220 ± 5% volts single phase AC supply having main silicon core copper wound step up transformer with suitable nos. of turns on primary side and secondary side the transformer should be fully insulated inside the MS sheet box of suitable size. There should be power control relay and single pole MCB (C-curve, 10kA) of suitable capacity complete with internal copper wiring along with amp. meter and volt meter, high voltage cut off 280 volt input (240 volt output) and 90 volt maximum boost and overloading protection to be provided:-(Automatic Voltage Stablizer 2 KVA)

Erection of Ceiling fans ( Labour rate only)

Erection of Exhaust fan with louver shutter on the wall/ window grill

Erection of 1X20/28/36/40W Box Type (LED/ Fluorescent) light fixture ( Labour rate only)

Extra Job for Installation of all AC and including supply pipes if any

Supply and erection of G.I. pipe ‘A’ quality of suitable length and dia. confirming to IS:1239 (Part-I) 1979, including fixing up to a given depth below G/L, the hole of excavation about 30cm dia. and given depth to be filled in up to 15cm below G/L with 1:2:4 cement concrete including painting of pole with two coats of approved aluminium paint as required:- G.I. Pipe Pole 6.1 metre Long, Dia. 80mm, Planting Depth 120cm with Pit Depth 135cm.

Supply and erection of G.I. Pipe (AClass) Single arm bracket of suitable length to give a total overhang at a tentative angle of 100/105º, the bracket should be fixed on the existing surface/ wall with 2nos. MS flat clamp 25mm x 5mm, 30cm long and 4nos. fastner 10mm x 75mm long with two coats of an approved aluminium paint complete in all respect as approved by the Engineer in- charge at site Single Arm Bracket 1 metre Long G.I. Pipe 40mm Dia.

Laying of under ground cable to be laid 1 metre below ground level including excavation, sand cushioning, covering with sand & First class bricks and back filling the trench etc.

Erection of G.I. Pipe/ 3-Stepped Steel tubular pole in suitable planting depth below ground level in a hole of excavation and suitable depth to filled in up to 15 cm below G/L with 1:2:4 cement concrete mixture but excluding cost of pole including two coats of approved aluminium paint etc:- Erection of G.I. pipe pole upto 6 m length (hole of excavation about 30 cm dia.)

Making of cement concrete muff of overall size 450mmdia., suitable length (15cm below ground level) with 1:2:4 cement concrete mixture. The muff is to be made around the steel tubular pole/ GI pipe pole. The outer surface of the muff shall be finished with 1:2 cement plaster with two coats of white snowcem complete in all respect as approved and desired by the Engineer in- Charge at site:- Cement Concrete Muff of Overall Size 450mm dia., 60cm long

Supply and erection of SMC Junction Box (Glass Fibre reinforced polyester sheet moulding compound) confirm to IS:14772 (Recessed/ On surface), robustly constructed, safe & shock proof, rust & tamper proof of suitable inner & outer dimensions with ± 10% tolerance in size & hinged water tight cover with locking arrangement having 1No. terminal strip with 4Nos. terminals & 1No. Single pole MCB of required capacity fixed on din bar (Din Bar Provision for 2Nos. MCB's) complete in all respect as approved and desired by the Engineer In-Charge at site:- SMC Junction Box (Glass Fibre reinforced polyester sheet moulding compound) confirm to IS:14772, inner dimensions 200mm x 140mm x 95mm with hinged water tight cover with locking arrangement

Providing & fixing bajaj LED Luminaire (45 W) street light

Providing 1200 mm Ceiling Fan(Bajaj or Equivalent) complete in all respect.

Providing 12W LED Surface Ceiling Lights(Syska or Equivalent) complete in all respect.

Providing 34W LED Recessed Panel Light(Philips or Equivalent) complete in all respect.

Providing LED Batten Tube light(Greatwhite or Equivalent) complete in all respect.

Providing 2.0Ton Wall Mounted Split AC Unit (LG or Equivalent) complete in all respect.

Providing 1.5Ton Wall Mounted Split AC Unit (LG or Equivalent) complete in all respect.

Providing Ventilating/Exhaust fan 300 mm (Bajaj or Eqivalent) complete in all respect.

Providing & Fixing 1100VA Inverter with 150 amp battery of approved brand(Luminous) with stand and installation

Supply of Sleepwell Bed Matterss 3'x6'

Supply of Mink Blanket 5Kg

Supply of Plastic Neelkamal Armchair CHR2135 (Nilkamal)

Supply of Polyster Plain Door Curtains

Providing & Fixing sun screen roller blinds

Larsen & Toubro 5 HP Starters Control Panel for Submersible Pump

Three Phase Submersible Pump Set 3.7 kiloWatt (5 HP)

Unbranded Pre stress pre cast M-35 boundary wall

Three Phase Submersible Pump Set 2.2 kiloWatt (3 HP)

THE BANARSI COOP L AND C SOCIETY LTD (BID ID -610404)

The Gurukirpa Co-op Society Ltd. (BID ID -610645)