Interior fitout work for creation of workspace for centralized transport NOC (Tx Noc) and NR NOC at office of Railtel, shastri park, Delhi

Grand Total Amount ₹ 5,76,37,698.00

Providing and laying cement concrete in retaining walls, return walls, walls (any

thickness) including attached pilasters, columns, piers, abutments, pillars, posts,

struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor

blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding

the cost of centering, shuttering and finishing:

4.2.5 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded

stone aggregate 20 mm nominal size derived from natural sources) Cum 64.25158 9311.4 ₹ 5,98,272.14

4.14 Extra for concrete work in superstructure above floor V level for each four floors or

Digitally signed by AMIT

Providing and laying Vitrified tiles in floor in different sizes (thickness to be

specified by the manufacturer) with water absorption less than 0.08% and

conforming to IS:15622, of approved brand & manufacturer, in all colours and

shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing

with grey cement slurry @3.3 kg/sqm including grouting the joints with white

cement and matching pigments etc. The tiles must be cut with the zero chipping

diamond cutter only . Laying of tiles will be done with the notch trowel, plier,

wedge, clips of required thickness, leveling system and rubber mallet for placing

the tiles gently and easily.

11.41A.3 Glazed Vitrified tiles Matt/Antiskid finish of size

Supply & installation Ancient alley of 100% commercial grade nylon carpet tile of

500x1000mm of solution dyed PRO-CARE Fiber Nylon (or equivalent), with

construction as tufted carpet tile having anti-microbial protection using PRO-CARE

AG+ guard. The tile shall have a pile weight of 23 oz/yd², pile height 6.0 ± 0.5 mm,

and total height 9.5 ± 0.5 mm, with a non-woven soft backing for superior comfort

and acoustic insulation. The carpet shall meet or exceed international safety and

performance standards including flammability (ASTM E648) – Class 1, smoke 640950

density (ASTM E662) – Passed, color fastness (GB 3920) – Passed, SVHC REACH

compliance (235 items – Not Detected), phthalates (EN 14372) – Passed, anti-fungal

activity (AATCC TM174) – 0 Grade, stain resistance (AATCC TM175) – 9 Grade, TVOC

(California Specification 01350) – Low, heavy metal (EU RoHS Directive) – Not

Detected, and anti-static walking test (GB/T-18044) – ≤3kV.

Digitally signed by AMIT

Supply & installation of laminate wooden flooring of size 1292x193mm (Classic

format) with a total thickness of 8mm, conforming to Class of Use 32 as per EN

13329 for moderate commercial applications. The flooring shall have a coreboard

of HDF+ (E1, CARB2/TSCA VI compliant) and feature the Aqua CLIC it! locking

profile. The product must be waterproof, tested for 24-hour water resistance

according to ISO 4760, with a qualitative rating < 3 after re-drying and a

quantitative rating of ≤ 0.3 mm swelling, with no water leakage. The flooring shall

have abrasion resistance rating of AC4 (≥ 4,000 cycles, ISO 24338), fire classification

Cfl-s1 (EN 13501-1), slip resistance DS ≥ 0.3 (EN 13893), thermal conductivity of 0.13

W/(m*K) (EN 12667), and impact resistance of ≥35mm (small ball) and ≥600mm

(big ball) tested as per EN 17368 and EN 13329 Annex C. Thickness swelling must be

≤ 18% (ISO 24336), and static indentation by constant pressure must be ≤ 0.05 mm

(ISO 24343-1). Resistance to staining shall comply with EN 438-2 with performance

level 5 for group 1 & 2 and level 4 for group 3. The product shall show no change in

appearance or damage under furniture leg impact (EN ISO 16581) and withstand

castor chair test for 15,000 cycles (EN ISO 4918).

ALUMINIUM SKIRTING: Supply of 100mm Aluminium (Grade 6063) Skirting with

15 micron anodising In Natural Finish. Thickness 1.30 to 1.50mm. Designed to

conceal screws. Seamless finish. Complete with Rubber/ PVC Jointers and

BAFFLE CEILING: Providing & fixing polylam blades vertical & horizontal baffle

system, exhibiting space-delineating characteristics. The system comprises baffles

50mm wide & 100 Deep thickness of minimum 0.5mm GMS, installed at 150mm

C/C. The C shaped shaped carrier rails run perpendicular to themain baffles

profiles. Individual baffle lengths between 300 and 2400 mm can be selected. Baffle

are supplied with the end cap matching the similar finish of baffle. Tolerances

according to TAIM, DIN EN 13964 and quality controlled to ISO 9001:2015 approved

by SIS. Substructure for POLYLAM® Ver cal baffle system consis ng of C shape

carrier of minimum 1.2mmthickinstalled perpendicularly to baffles, same was

hanged to wall with the help of wall anchor fasteners. Baffles to be sqm 10 ₹ 0.00 4500 45000

connectedperpendicular to C shaped carriers with the help of baffle hanger

brackets. The primary profiles must be connected to oneanother with longitudinal

splice connectors. C shaped baffle carriers to be installed at maximum distance of

1200mm. in a length of 2400 mm baffles.Manufacturer shall have the fully

automatic powder coating system with power and free conveyorize 3mtr/minute

capacity. Powder coating plant shall be equipped with latest modern technology

with fully automatic inline Pre-treatment using nano technology, Inline automatic

water Drying system after pre-treatment. Mode of Measurements: Measurements

shall be wall to wall without any deductions for lights, diffuses, columns etc.. IN

Digitally signed by AMIT

GYPSUM BOARD CEILING: Providing and fixing false ceiling at all height including

providing and fixing of frame work made of special sections, power pressed from

M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive)

as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with

flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the

ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other

flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with

nuts & bolts of required size and other end of angle hanger fixed with intermediate

G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to

which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered

flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be

fixed in a direction perpendicular to G.I. intermediate channel with connecting clips

made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing

perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm

long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at

450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including

fixing of gypsum board to ceiling section and perimeter channel with the help of dry

wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a

flush finish of tapered and square edges of the board with recommended jointing

compound , jointing tapes , finishing with jointing compound in 3 layers covering

upto 150 mm on both sides of joint and two coats of primer suitable for board, all

as per manufacturer's specification and also including the cost of making openings

for light fittings, grills, diffusers, cutouts made with frame of perimeter channels

12.5mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I)

:2011 (Board with BIS certification marks) sqm 500 1355.8 ₹ 6,77,900.00

Providing the gypsum single sided cove of 150mm x 150mm having a facia of 75mm

MR to macth the specifications same as gypsum ceiling. 46112.85

Digitally signed by AMIT

Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm

approved texture, design and pattern. The tiles should have Humidity Resistance

(RH) of 99%, Light Reflectance ≥ 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K,

Fire Performance as per (BS 476 pt - 6 &7)in true horizont al level suspended on

interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick

(galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000

mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross

T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm

suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50

mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded

hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm,

spaced at 1200 mm centre to centre along main ‘T’. The system should rest on

periphery walls /partitions with the help of GI perimeter wall angle of

size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help

of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws.

The exposed bottom portion of all T-sections used in false ceiling support system

shall be pre-painted with polyester baked paint, for all heights. The work shall be

carried out as per specifications, drawings and as per directions of the engineer-in-

26.27.1 With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.60) sqm 326.1504 2333.6 ₹ 7,61,104.55

Providing and fixing aluminium work for doors, windows, ventilators and partitions

with extruded built up standard tubular sections/ appropriate Z sections and other

sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash

fasteners of required dia and size, including necessary filling up the gaps at

21.1 junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene

gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and

jointed mechanically wherever required including cleat angle, Aluminium snap

beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per

architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling

and dash fasteners to be paid for separately) :

21.1.1 For fixed portion

Polyester powder coated aluminium (minimum thickness of polyester powder

coating 50 micron) Kg 250 539.85 ₹ 1,34,962.50

Providing of fixing and DGU glass in existing façade, if any façade glass found

MR damage Sqm

4MM THICK MDF BOARD: Providing and fixing plain lining with necessary screws/

nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on

MR wooden/ steel frame work, complete as per direction of Engineer-in-Charge

Digitally signed by AMIT

4mm thick MDF Board Sqm 177.6 ₹ 0.00 250 44400

LAMINATE: Providing & Fixing decorative high pressure laminated

sheet of plain / wood grain in gloss / matt/ suede finish with high

9.127.2 density protective surface layer and reverse side of adhesive bonding 897.30

quality conforming to IS : 2046 Type S, including cost of adhesive of

approved quality. 1MM THICK

THERMAL INSULATION: Providing and fixing thermal insulation with Resin

Bonded Fibre glass wool conforming to IS: 8183 having density 24

kg/m3, 50mm thick, wrapped in 200G Virgin Polythene Bags fixed to

12.57 wall with screw, rawl plug & washers and held in position by criss

crossing GI wire etc. complete as per directions of Engineer-in-

Providing and fixing 12 mm thick frameless toughened glass door shutter of

approved brand and manufacture, including providing and fixing top & floor spring

type fixing arrangement and making necessary holes etc. for fixing required door

bottom pivot & double acting hydraulic fittings, all complete as per direction of

Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).

Providing and Fixing Double cylinder Floor Spring- with Closing Force EN 3 with

Maximum door weight 105 Kg. Maximum door width 950mm.Closing speed : 130°

Final closing speed : 15-0°. Hold Open (standard): 90° hold open. Weight of floor

spring approx : 6kg, 5,00,000 cycles Tested with 5 Years Warranty against

manufacturing defect. CE certified for wooden doors all complete as per the

direction of Engineer-in-charge.

Providing and Fixing 22x922 mm D-type Handle Material : Stainless Steel. Finish :

MR Satin Stainless Steel (SSS). of approved make and model all complete as per the Nos. 34 ₹ 0.00 4220 143480

direction of Engineer-in-charge.

Providing and Fixing floor lock for door thickness 12 mm for of approved make and

model all complete as per the direction of Engineer-in-charge.

GLASS FILMS: Providing & Fixing Frosted Translucent, cast PVC, self-adhesive vinyl,

special CRYSTAL-effect film to reproduce Sand-blasting effect on glass with

customised designs, thickness of 2 mil (0.05mm) without adhesive & 3mil (0.8)with

adhesive having minimum tensile strength of 3.5 pound/inch at 73 F(0.6 kg/cm at

MR 23 C). Adhesion after 24hrs of installation should be 4 pounds/inch (0.7 kg/cm) on Sqm 116.295 ₹ 0.00 950 110480.25

Acrylic, Glass Polycarbonate: MCS warranty of 3yrs (if exposed to direct sunlight) to

15yrs (indoors). Contractors payment wouldn't be released until & unless he/she

produces orginal warranty certificate from the manufacturer.

Digitally signed by AMIT

GLASS PARTITION SYSTEM (12MM TOUGHENED GLASS): Supply & Installation of

Aluminum profile with top & bottom profiles as per site requirement in Natural

Anodized / Black finish. Partition sides to be fixed with mullion and it's covers

should be easily accesible while removal of glass, if & when required. Glass to be

fixed with suitable EPDM gaskets for insertion of combination of 12mm thick clear

toughened glass . Glass should not placed directly on profiles for giving more

strength. It should be placed on aluminium spacer profiles and spacers should be

covered with cover profiles. Partition Glass joineries consists of two-way

Polycarbonate I-profiles, 90 Degree Polycarbonate L-Junction and Polycarbonate T-

Junction profiles. Polycarbonate profile joineries to be fixed with double sided

adhesive tape & profiles to be inserted in the joint instead of sealing it with

sealants. Polycarbonate profiles to be used to give continuity glass effect. Hardware

for fixing profiles to be used as per manufacturer standard. Costs should be

inclusive of necessary Hardware for fixing of profiles & installation charges.

providing and fixing dado consting of aluminium section suitable size with 12 mm

thick commercial ply and 1 mm Thick veener with glossy polishingwith necessary

MR screws/ nuts & bolts/ nails, including a coat of approved primer on one face, and Sqm 335400

fixed on wooden/ steel frame work, complete in all respect as per direction of

engineer in charge 51.6 ₹ 0.00 6500

Providing and applying plaster of paris putty of 2 mm thickness over plastered

surface to prepare the surface even and smooth complete Sqm 857.5066 262.7 ₹ 2,25,266.99

Applying priming coats with primer of approved brand and manufacture, having

low VOC (Volatile Organic Compound ) content.

With water thinnable cement primer on wall surface having VOC content less than

Wall painting with premium acrylic emulsion paint of interior grade, having VOC

(Volatile Organic Compound) content less than 50 grams/ litre of approved brand

and manufacture, including applying additional coats wherever required to achieve

even shade and colour

Providing and applying cement plaster. 12mm cement plaster of mix 1 : 6 (1 cement

Providing & fixing factory made modular Buffet Counter with 19 mm thick Ply base

for Acrylic solid Surface & 19 mm Thick ply Structure for Buffet Counter & 12 mm

thick Base ply Behind With Laminate 1 mm thick hi gloss/Suede Finish ad per design

& Detail Drawing of Buffet Counter & Louver For Air Circulation The laminate on

both sides with 19mm wide 2mm thick PVC edge banding, All Surface finished in

MR high gloss acrylic of approved. The cabinet boxes of floor units will be supported by Sqm 2.97 ₹ 0.00 35000 103950

100mm height vertical adjustable legs/ Skirting which will be covered with PVC

skirting in brushed aluminum finish attached by hardware of skirting. The unit shall

be fixed to the floor/ wall/slab using metal screws of appropriate size and rawl

plugs. Only front face area of cabinets and skirting from floor to top of boxes shall

be considered for measurement and payment . Cabin.) and join together as per site

requirements etc.

Digitally signed by AMIT

ROLLER BLINDS : Providing & supplying of roller Blinds as per the approved sample

in required shade and style consisting, of Roller Blinds comprising of optima screen

Fabric comprising of 22% polyester, 78% PVC, Fabric weight 460-480G weight per sq

m, Thickness 0.67 mm, Yarn count 18-19/cm, having fire resistance standard – NFPA

701-89 small testing ISO-5659-2 .The tear resistance should be complying to

ISO4674 & breaking resistance – ISO 5081. The DRIVE UNIT shall be of clutch for

quick,easy and safe installation,moulded plastic with steel spring support and

inserted into the tube end. It shall be driven by a ball chain pulley with ball chain

and can be positioned at right side or left hand side of the Shade. The Shade when

lowering or raising, shall be automatically locked in position upon release of the ball

chain by means of a built in friction lock.Universal clutch for left and right hand

operation.Chain Gear Ratio of 1.75:1.The END PLUG shall be molded of plastic 52800

witha steel location pin. The plug shall be inserted into the tube end. (Opposite to

the Drive Unit) for ease of installation. TheSUPPORT BRACKETS shall be of coated

steel & provided with covers and used in right hand or left hand positions

differentiated by the acceptance of the of the rectangular drive unit support or the

round idler plug pin.Can beinstalled (a) On Face (b) Ceiling Mount (c) On Frame (d)

in Recess. The Bracket should be protruding outside maximum of80mm.The

ROLLER TUBE shall be of extruded aluminum with 37mm internal diameter & skin

thickness of 1mm and shall incorporate a key way integral with the tube to

accommodate the spline. The BOTTOM RAIL shall be a Flat Bottom made up of

powder coated steel. The BALLCHAIN shall be 2mm diameter cord with 4.5mm

diameter acetal balls moulded co-axially to it on 6mm pitch to form an endless Sqm 26.4 ₹ 0.00 2000

ballchain.It is used for raising or lowering action of the shades.hall be suitable for

PELMET: Fabricate and install pelmet made of 19mm thick board, up to 300mm

high and in line with external glazing as per details of Architect. Rate to include

MR finishing exposed surfaces of the Pelmet with 1mm laminate. RM 22 ₹ 0.00 225

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I)

decorative type, core of block board construction with frame of 1st class hard wood

and well matched teak 3 ply veneering with vertical grains or cross bands and face

veneers on both faces of shutters

35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws Sqm 2.5 3473.85 ₹ 8,684.63

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation

6.4. 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in

6.4.1 Cement mortar 1:4 (1 cement : 4 coarse sand) cum 5 9344.35 ₹ 46,721.75

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class

designation 7.5 in superstructure above plinth level up to floor V level.

6.13.1 Cement mortar 1: 3 (1 cement: 3 coarse sand) sqm 5 1150.50 ₹ 5,752.50

Digitally signed by AMIT

LACQUERED GLASS: Providing and fixing of 6mm thick annealed SGG Planilaque

Evolution (premium GRIHA rated lacquered glass from Saint-Gobain) of approved

color by Architect/ Client / Customer, fixed with SGG ULTRAFIX (compatible neutral

core silicon/ double sided tape) on a perfectly leveled 12mm thick water proof marine

plywood / MDF / Mineral fibre board which is mounted on the RCC wall/any other

structure. Lacquered glass must be made industrially (via curtain coating process);

opaque (if viewed against a support wall), coated with PU lacquer (50 micron thick);

color consistency (measured by Minolta spectrophotometer CM5081); highly durable

(passes PERSOZ hardness test for minimum 220 oscillatios); humid resistant

(conforms to BS EN 1036 1999); environmentally friendly (no lead, no arsenic, no

copper, noformaldehyde); appropriate recycled content (12% post industrial/ 6% post

consumer); compressive strength (1000 MPa) & tensile strength (40 MPa), same as

Providing & Fixing Wallpaper as per approved design & including base primer for

smooth surface. Sqm 10 1000

Providing and fixing cupboard shutter with 19mm thick one side decorative and

other side balancing lamination factory pressed BWP grade marine ply as per IS 710

9.168 of approved brand including 2mm thick PVC edge banding tape with hot glue by

edge bending machine etc. with auto closing spring loaded hinges (hydraulic type)

etc. complete as per direction of Engineer-in-charge.(Payment of providing and

fixing auto closing hinges shall be paid separately) sqm 50 2829.25 ₹ 1,41,462.50

Providing and fixing M.S. Tubular frames for doors, windows, ventilators and

cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet,

joints mitred, welded and grinded finish, with profiles of required size, including

10.15 fixing of necessary butt hinges and screws and applying a priming coat of approved

10.15.1 Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block

15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20

mm nominal size) Kg 100 195.2 ₹ 19,520.00

Water proofing treatment of Vertical joints (of external side and internal side)

between door frame, window & ventilator frames (on all four sides) of outer wall

26.59 over the Zycosil/equivalent & Zycoprime/equivalent solution already applied metre 100 49.95 ₹ 4,995.00

(before the installation of door / window / ventilator frames in position) and fine

finish with Grout RW/equivalent.

Providing and laying Polished Granite stone flooring in required design and

patterns, in linear as well as curvilinear portions of the building all complete as per

the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick

base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement

slurry and pointing with white cement slurry admixed with pigment of matching

shade including rubbing, curing and polishing etc. all complete as specified and as

directed by the Engineer-in-Charge Sqm 5 4481.3 ₹ 22,406.50

Digitally signed by AMIT

Polished Granite stone slab of colour Black, Cherry/Ruby Red or equivalent

Airpurification process ensure long lasting efficiencies, guaranting a continous and

constant air treatment under severe condition in indoor. The system should

capture and sterlize the virus and bacteria family by destroying their membrane

and DNA and system should treat micro particles and aerosols at high efficiency

upto 95%, risk of aerosol transmission. carcinogenic gases are to be eliminated by

being transfrormed into harmless nobel gases. air purifier should be integrable

with HVAC and existing system and should eliminate particulate pollutant, viruses

and bacteria, gaseous and chemical pollutant, gaseous organic compounds, odors

and smell ₹ 20,88,331.00

04 Nos. of standalone unit with a set of wheel for theri easy relocation whenever

required. This model is a plug & play, eliminating any needs of civil works

01 No. unit compatible with HVAC, the configuration of this model is a plug & play,

requiring a 400V AC three phase power supply

Add Labour cess @0.973 on DSR Items as per CPWD circular ₹ 53,32,538.55

Amount after add cost index @103 on DSR civil 2023 ₹ 54,92,514.71

Digitally signed by AMIT

DSR NO DESCRIPTION QUANTIT Y DSR Rate MR TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION QUANTIT Y DSR Rate MR TOTAL AMOUNT TOTAL AMOUNT

2022 RATE DSR (INR) NON-DSR (INR)

A POINT WIRING

Wiring for light point/ fan point/ exhaust fan point/ call bell

point with 1.5 sq.mm FRLS PVC insulated copper conductor

single core cable in surface / recessed medium class PVC

conduit, with modular switch, modular plate, suitable GI

A.1 box and earthing the point with 1.5 sq.mm. FRLS PVC

insulated copper conductor single core

cable etc as required.

Wiring for group controlled (looped) light point/ fan

point/call bell point (without independent switch etc.) with

1.5 sq.mm FRLS PVC insulated copper conductor single

core cable in surface / recessed PVC conduit, and

A.2 earthing the point with 1.5 sq.mm. FRLS PVC insulated

copper conductor single core cable etc as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC

insulated copper conductor single core cable in surface/

recessed medium class PVC conduit alongwith 1 No 4 sq.

mm FRLS PVC insulated copper conductor single core

cable for loop earthing as required.

Supplying and fixing following modular switch/ socket on

the existing modular plate & switch box including

connections but excluding modular plate etc. as required.

1.24.4 3 pin 5/6 amp socket outlet Each 200 122.00 24,400.00

1.24.5 6 pin 15/16 amp socket outlet Each 60 197.00 11,820.00

A.6 1.26 Supplying and fixing modular blanking plate on the

existing modular plate & switch box excluding modular

plate as required.

1.27 Supplying and fixing following size/module, GI box along

with Modular base & cover plate on existing modular

metal boxes etc. as required.

Digitally signed by AMIT

B SUBMAIN AND CONTROL WIRING

1.14 Wiring for circuit/ submain wiring alongwith earth wire

with the following sizes of FR PVC insulated copper

conductor, single core cable in surface/ recessed medium

class PVC conduit as required

1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre 250 334.00 83,500.00

1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 50 439.00 21,950.00

1.14.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire Metre 50 1005.00 50,250.00

1.14.11 4 X 16 sq. mm + 2 X 6 sq. mm earth wire Metre 50 1365.00 68,250.00

Supplying and making end termination with brass

compression gland and aluminium lugs for following size of

9.1 PVC insulated and PVC sheathed / XLPE aluminium

conductor cable of 1.1 KV grade as required.

MR Supply of following XPLE armourned 1.1 KV grade

conforming to I.S.7098/1554Aluminium Conductor Cables :

Supply of following sizes of PVC sheathed PVC/XLPE

insulated Aluminium conductor armoured cable of 1.1 KV

C.2 grade conforming to IS:7098 part-1 / IS:1554 part-1

respectively & ISI marked.

(a) 4 C x 120 Sqmm XLPE cable

(e) 4 C x 35 Sqmm XLPE cable RM 50 1000.00 50,000.00

Supply of following sizes of copper cables -PVC sheathed

PVC/XLPE insulated Copper conductor armoured cable of

C.3 MR 1.1 KV grade conforming to IS:7098 part-1 / IS:1554 part-1

respectively & ISI marked.

(a) 4 C x 16 Sqmm XLPE copper cable RM 40 1850.00 74,000.00

(b) 4 C x 25 Sqmm XLPE copper cable RM 40 2140.00 85,600.00

D.1 2.11 Supplying and fixing single pole blanking plate in the

existing MCB DB complete etc. as required.

Digitally signed by AMIT

D.2 Supplying and fixing 5 amps to 32 amps rating, 240/415

volts, "C" curve, miniature circuit breaker suitable for

inductive load of following poles in the existing MCB DB

complete with connections, testing and commissioning

etc. as required.

Supplying and fixing following rating, four pole, 415

volts, isolator in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

Supplying and fixing following way, horizontal type three

pole and neutral, sheet steel, MCB distribution board,

415 V, on surface/ recess, complete with tinned

copper bus bar, neutral bus bar, earth bar, din bar,

interconnections, powder painted including earthing etc.

as required. (But without MCB/ RCCB/ Isolator)

MR 12 way (4 + 36), Double door Each 2 9081.00 18,162.00

2.14 Supplying and fixing following rating, double pole, (single

phase and neutral), 240 volts, residual current circuit

breaker (RCCB), having a sensitivity current upto 300

milliamperes in the existing MCB DB complete with

D.5 connections, testing and commissioning etc. as required.

E PROVISIONS FOR VOICE, DATA, SECURITY & TV SYSTEMS

Supplying and fixing following modular switch / socket on

the existing modular plate & switch box including

E.7 connections but excluding modular plate etc. as required.

1.24.7 TV socket outlet Set 5 148.00 740.00

Supply, Installation, Testing and Commisioning of

Galavanized Iron (GI) Raceways along with required

suitable number of GI couplers for joining raceways and

fixing GI brackets and all accessories complete in all

respect as per the directions of engineer in charge

(a) 300mmx38mm(GI) - 3 compartment Mtr 40 3450.00 1,38,000.00

Digitally signed by AMIT

Supply, Installation, Testing and Commisioning of Junction

boxes for direct access to cables at the intersection of

raceways supplied completely with base and cover

MR plates, height adjustable junction box 65- 90 mm

including all accessories complete in all respect as per the

E.10 directions of engineer in charge

Supplying and drawing co-axial TV cable RG-6 grade, 0.7

mm solid copper conductor PE insulated, shielded with

fine tinned copper braid and protected with PVC

sheath in the exisitng surface/recessed steel/ PVC

conduit as required

Supplying and fixing of following sizes medium class PVC

conduit aong with accessories in surface/ recess

E.12 including cutting the wall and making good the same

incase of recessed conduit as required

E.13 Supplying and Installation of following size perforated of

painting with powder coating M.S. cable trays of

perforation of not more than 17.5% in convinient sections,

4.1 joined with connectors suspended from the cieleing with

MS suspenders including bolts and nuts painting

suspenders etc as required

4.1.6 450 mm width x 50 mm depth x 2 mm thickness Metre 50 1137.00 56,850.00

Earthing with copper earth plate 600 mm X 600 mm X 3

mm thick including accessories, and providing masonry

enclosure with cover plate having locking

arrangement and watering pipe of 2.7 metre long etc.

charcoal/ coke and salt as required.

F.2 5.14 Providing and fixing 25 mm X 5 mm copper strip on surface

or in recess for connections etc. as required.

F.3 5.15 Providing and fixing 25 mm X 5 mm G.I. strip on surface or

in recess for connections etc. as required.

F.4 5.16 Providing and fixing 6 SWG dia G.I. wire on surface or in

recess for loop earthing as required.

Note : Above rates are inclusive of providing suitable

electrical panel for feeding supply to light db, power db,

ac db, ups as per site condition and direction of engineer

Digitally signed by AMIT

Total of Electrical items ₹ 11,74,902.00 ₹ 7,82,147.00

Add GST factor @1.0633 on DSR items ₹ 12,49,273.30

Add CPWD cost index @1.10 on DSR E&M 2022 ₹ 13,74,200.63

Add Labour cess @0.973 as per CPWD circular ₹ 13,37,097.21

Total Amount (A)

Total Amount (A)

Items on DSR E&M 2025

5.2 Supplying, installation, Testing & Commissioning of of

following capacity at full load (Unity Power Factor) at

operating temperature 0 to 40 deg C, Relative humidity 0

to 95%, Online double conversion true sine wave

Uninterrupted hot swappable (allow for the replacement

battery modules without shutting down the entire system)

modular Power Supply (UPS) system with N+1 modules (N

denotes total number of moduels

requird for rated capacity). The UPS shall include a

Rectifier, inverter,

battery bank suitable for 30 minutes back up (Battery VAH

capacity shall not

be less than 1600 VAH per KVA of UPS rating per Hour

backup time) on full

load (Battery shall be VRLA, SMF in ABS Container) and

switch alongwith provision for manual bypass, suitable

isolation transformer

for additional protection against neutral faults etc. UPS

shall have inbuilt

phase sequence correction. The UPS systems offered are to

be of the latest

technology with Digital Control Microprocessor based for

reliable operation

using Insulated Gate Bipolar Transistor (IGBT)'s both for the

inverter (3 Level) with PWM (Pulse Width Modulation). The

quality of design,

manufacturing and inspection process should confirm to

the relevant International

MR Providing and fixing indoor LED profile light strip Length:

Standard 2 m or continuous run mountable profiles Power

rating: ~10–30 W/m Color temperature: 3000 K / 4000 K / Rmt 100 220.00 22,000.00

6500 K options Lumens: 1,200–3,000 lm per meter IP rating:

IP20 (indoor) to IP65 (outdoor/wet)—often specified

Compliance: IS:10322 for luminaires & IS:16107 or BIS

Digitally signed by AMIT

Supplying, installation, Testing & Commissioning of Panel

light 2x2 ft., of following body material and construction as

per IS : 10322 with driver as per the requirement with Driver

efficiency >85%, Operating voltage AC 140- 270 Volt, freq

50/60 hz, Operating temp range -15 deg to 40 deg

centigrade, internal surge protection of 2.5 KV with Short &

Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI

>80, UGR (Unified Glare

Rating) < 19, Flicker free, (flicker should be below 5 %), life

1.7 time (LED,Driver & electrical circuitry), of minimum 50000

Burning Hours with 70% of initial Lumen maintained till life

ends,CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per

ANSI Bin), SDCM(Standard Deviation Color Matching) <3,

Maximum power consumption should not more than the

specified rating and Fixture shall be of relevant BIS

standard and trade mark certificate ( T.C.). Manufactures

Word Mark/ Name Engraved/ Embossing/ Screen printing

on housing. complete in all respect

i/c connections with 1.5 sq mm FRLS, PVC insulated copper

DSR E&M Supplying, installation, Testing & Commissioning of LED

2025 Recessed / surface Down lighter (Round / square/

Rectangular) SMD type of following body material with

PMMA and prismatic diffuser and construction as per IS :

10322 with driver as per the requirement with Driver

efficiency >85%, Operating voltage AC 140-270 Volt, freq

50/60 hz, Operating temp range -15 deg to 40 deg

centigrade, internal surge protection of 2.5 KV with

Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20,

CRI >80 , UGR (Unified Glare Rating) < 19, Flicker free

(flicker should be below 5 %), life time (LED,Driver &

electrical circuitry), life time of

minimum 50000 Burning Hours with , 70% of initial Lumen

maintained till life ends , CCT 3000°K / 4000°K / 5700°K

/6000°K/6500°K (As per ANSI Bin), SDCM(Standard

Deviation Color Matching) <3, Maximum

Digitally signed by AMIT

1.9.5 Supplying, installation, Testing & Commissioning of LED

surface mounted Batten light of following body material

and construction as per IS : 10322 with driver

(Replaceable) as per the requirement with Driver

efficiency >85% ,Operating voltage AC 140-270 Volt, freq

50/60 hz, Operating temp range -15 deg to 40 deg

centigrade, internal surge protection of 2.5 KV with Short &

Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI

>80, Flicker free, (flicker should be below 5 %), life time

(LED,Driver & electrical circuitary), of minimum 50000

Burning Hours with , 70% of initial Lumen maintained till life

ANSI Bin), SDCM(Standard Deviation Color

Matching) <3, Maximum power consumption should not

more than the specified rating and Fixture shall be of

relevant BIS standard and trade No. 70 622.00 43540

mark certificate ( T.C.). Manufactures Word Mark/ Name

Engraved/ Embossing/ Screen printing on housing.

complete in all respect i/c

connections with 1.5 sq mm FRLS, PVC insulated copper

conductor single core cable and earthing etc. as required

with Minimum 5 year OEM

warranty. System lumen efficacy ≥105 <120 lm/Watt output

. LM79 & LM80 Test report from NABL lab for all testing

required for LED fixtures as

per BIS shall be submitted. Shape size and CCT shall be as

approved by Engineer-in-Charge as per requirement.

(Thermal management: heat sink of aluminum housing

such that LED junction temperature shall not rise above

CRCA Sheet Body (Thickness ≥ 0.50 mm)

Total of Electrical items DSR+NDSR (A+B) ₹ 19,81,439.21 ₹ 8,04,147.00

Digitally signed by AMIT

Sr.no Specification Qty Unit Rate Reference Image

1 Sofa for Collab area

Dimension:2060mm(L) x905mm(D)x 855mm(H) 1 nos 79,520 79,520

Supplying and Placing in Position of 3 seater modernist classic design sofa size : 2060mm(l) x905mm(d)x 855mm(h). Material :

premium leatherette / style : contemporary colour : brown-camel brown / finish : matte. Supplying and placing three seater sofa

that shall be constructed from natural hard wood and commercial plywood having inner frame. the thickness of the wood should

allow for the heavy tension webbing. the sofa size is 1830mm(l) x760mm(d)x 790mm(h) shall have spring attached and also be

padded separately. the seat shall have double cone spring integrated with epitome of luxury. the frame shall be padded with high

resilience polyurethane foam having density 45kg/m³ in seat and 32kg/m³ in back. there shall be cushion arm provided padded

with high resilience polyurethane foam having density 32kg/m³. The complete structure shall be upholsteredwith leatherite

tapestry 0.8 +/- 50.1 mm thick and 535 gsm. the combination construction structure are made in moisture content shall be less

than (10-12)%. thickness of plywood used (mm) shall be 12 mm grade is 303 indian standard for commercial (common) and

moisture proof plywood (tentative).understructure shall consist of ms powder coated square pipe having cross-section area

25mm x 25mm with 1.6mm thick the legs shall be made up of powder coated round pipe of dia. 25.4mm with 1.6mm thick. there

shall be co-polymer polypropylene shoe provided at the bottom to avoid scratches on the floor.the seat size shall be 490 +/-

510mm(d) x 450 +/- 510mm(h). The product should be from manufacturer(OEM) which have BIFMA COMPLIENT

Certification, INDIAN DESIGN MARK Certification, GREEN PRO Certification, AIOTA Certification, BIFMA LEVEL-1

Certification, GRIHA Certification and from the approved make of Durian, Godrej,HNI. The product should be as per above

given specification under the guidance of project architect & Engineer in charge.

2 Centre table for Collab area

Dimension(W)1200mm X (D)600mm X (H)460mm 1 nos 32,355 32,355

Supplying, and placing in position of center table as per photograph. the centre table collection is destined to become a

centerpiece of your modern Indian homes. Perching on solid wood trestle legs, the veneer tabletop is tastefully adorned with

brick pattern, crafted to perfection by skilled Marquetry artisans.Tabletop crafted of premium engineered wood wrapped in

Steam Beech veneer in Wenge finish.Veneer features brick patterns, masterfully crafted by skilled Marquetry artisans.Legs are

crafted of kiln-dried solid wood for added durability.Material & Subtype Veneer,Solid Wood - Steam Beech Wood, Table Top

Thickness 36mm,Colour & Colour Family, Brown - Wenge.The product should be from manufacturer(OEM) which have BIFMA

COMPLIENT Certification, INDIAN DESIGN MARK Certification, GREEN PRO Certification, AIOTA Certification, BIFMA

LEVEL-1 Certification, GRIHA Certification and from the approved make of Durian, Godrej,HNI. The product should be as per

above given specification under the guidance of project architect & Engineer in charge.

3 Chair for Collab area 8 nos 57,588 4,60,705

Supplying and placing in position of chair as per Image. Sense, simplicity and style best describe the lounge chair. Its practical

structure offers you a plush. Featuring a high back and slim, sturdy armrests, the chair is proof that form and function can truly

coexist.Fabric upholsterywith Steel legs with a wood finish.Dimesnion: 543mm(L) x 558mm(D) x 822mm(H).Material :Fabric,

Legs Material :Mild Steel.The product should be from manufacturer(OEM) which have BIFMA COMPLIENT Certification,

INDIAN DESIGN MARK Certification, GREEN PRO Certification, AIOTA Certification, BIFMA LEVEL-1 Certification, GRIHA

Certification and from the approved make of Durian, Godrej,HNI. The product should be as per above given specification under

the guidance of project architect & Engineer in charge.

4 Side table for Collab area

Dimension (Dia)600mm X (H)600mm 2 nos 12,696 25,392

Digitally signed by AMIT

Supplying, and placing in position of side table as per Image. The side table are made of solid wood. The clear round table top is

made from 10mm thk tempered glass for everyday use. The glass top is supported by beautiful wooden legs made from solid

beech wood with a glossy walnut brown finish. The side table have Solid Beech wood base with Round shape 10mm thk

Tempered Glass Table Top. Colour: Walnut brown colour with a glossy finish. The product should be from manufacturer(OEM)

which have BIFMA COMPLIENT Certification, INDIAN DESIGN MARK Certification, GREEN PRO Certification, AIOTA

Certification, BIFMA LEVEL-1 Certification, GRIHA Certification and from the approved make of Durian, Godrej,HNI. The

product should be as per above given specification under the guidance of project architect & Engineer in charge.

5 High stool for Collab area 3 nos 12,595 37,784

Supplying, and placing in position of high stool as per Image. The counter stool brings together a sophisticated mix of

materials. The slender metal frame features a comfortable footrest, topped with a beautifully tailored sumptuous velvet seat and

enveloping crescent back that both maximize comfort while entertaining. Streamlined and stylish, Derby makes a handsome

addition to your home bar or kitchen island. Material & Subtype:Metal, Fabric - Velvet, Frame Material:Metal, Upholstery

Material:Fabric - Velvet Filling MaterialFoam, Seat MaterialFabric - Velvet, Leg Material:Metal, Colour & Colour FamilyGrey -

Ash Grey, Black, Dimension:(W450mm X (D)470mm X (H)900mm, Seating Height :660mm. The product should be from

manufacturer(OEM) which have BIFMA COMPLIENT Certification, INDIAN DESIGN MARK Certification, GREEN PRO

Certification, AIOTA Certification, BIFMA LEVEL-1 Certification, GRIHA Certification and from the approved make of Durian,

Godrej,HNI. The product should be as per above given specification under the guidance of project architect & Engineer in

6 Main Table for Manager's Cabin

Main Table Dimension: 1500mm(L) X 750mm(D) x 750mm(H) 7 nos 12594.7 88,163

Side Runner Dimension: 1050mm(L) X 450mm(D) x 750mm(H)

Supplying and placing in position of table as per photograph. Table top shall be made of 36mm thick pre- Laminated particle

board of approved shade having leatherette writting pad as per image. Table Top working edges shall be provided with matching

machine pressed 2mm thick PVC edging using with special hot melt glue at hot temperature. Table top supported on side panles

and modesty panel. Side and Modesty panel shall be made out of 36mm & 18mm thick pre-laminated particle board laminated

on both sides as approved shade. The working or nonworking edges shall be provided with matching machine pressed 2mm

thick PVC edging using with special hot melt glue at hot temperature. The table shall be provisioned with Side unit. The top shall

be made of 36mm thick prelaminated particle board matching with table top. Rest carcass shall be made of 18mm thick while

backing shall be 9mm thick pre-laminated with handles and locking arrangements. Provision of 400L x 450W x 630Ht Pedestal

of 2 Drawer + 1 Filling unit, made of 18mm thk Prelaminated Particle Board with PVC edge banding. All drawers shall have a

central lock mechanism. The product should be from manufacturer(OEM) which have BIFMA COMPLIENT Certification,

INDIAN DESIGN MARK Certification, GREEN PRO Certification, AIOTA Certification, BIFMA LEVEL-1 Certification, GRIHA

Certification and from the approved make of Durian, Godrej,HNI. The product should be as per above given specification under

the guidance of project architect & Engineer in charge.

7 Back Storage for Manager's Cabin

Dimension:2100mm(L) X 450mm(D) x 750mm(H) 6 nos 47,502 2,85,009

Digitally signed by AMIT

Supplying, and placing in position of medium height storage @ 750mm height as per photograph/drawing . The storage unit

having Openable shutters with shelf in it. The modular storage unit top shall be made from 18 mm thick pre-laminated particle

board and rest of the sides as well as shelves and shutter to be made up of 18 mm thick pre-laminated particle board while back

to be made of 8 mm thick pre-laminated particle board. All edges to be provided with 2 mm thick PVC lipping. The storage unit

having openable shutters withD shape handles & locking arrangement.The product should be from manufacturer(OEM) which

have BIFMA COMPLIENT Certification, INDIAN DESIGN MARK Certification, GREEN PRO Certification, AIOTA Certification,

BIFMA LEVEL-1 Certification, GRIHA Certification and from the approved make of Durian, Godrej,HNI. The product should be

as per above given specification under the guidance of project architect & Engineer in charge.

8 Main Chair for Manager's Cabin 6 nos 21,737 1,30,420

Supplying & placing in position of high back 360°-degree revolving chair all over size is: 640mm(l)x 670mm(d)x 1350mm(h) as

per image, the chair made of full mesh in black colour .it will come in matte finish about style type is modern. Arms: armrest is

having two adjustment heights (up & down). use of ply: 12 mm thick hot pressed bwr plywood (is grade - 303 for seat). Seat: 40

± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in seat, back: frame of design

shall be curved made of two pieces injection moulded frame cover with mesh. backrest support adjustable lumbar support

mechanism: self-weighted multi locking mechanism. Only seat size is 500mm(l)x 500mm(d)x 540-440mm(h) & the back size is

480mm(l)x 815mm(h), seat maximum height is 540mm & minimum height is 440mm & back height from floor maximum

height is 1350mm & minimum height is 1250mm. gas lift 100 mm telescopic haudraulic base: 650 mm chrome prong base is

620mm pitch centre dia (660mm with castors) .The product should be from manufacturer(OEM) which have BIFMA

COMPLIENT Certification, INDIAN DESIGN MARK Certification, GREEN PRO Certification, AIOTA Certification, BIFMA

LEVEL-1 Certification, GRIHA Certification and from the approved make of Durian, Godrej,HNI. The product should be as per

above given specification under the guidance of project architect & Engineer in charge.

9 Visitor Chair for Manager's Cabin 12 nos 19,261 2,31,134

Supplying & placing in position of medium back 360°-degree revolving chair all over size is: 640mm(l)x 670mm(d)x

1100mm(h), The chair made of full mesh in black colour.it will come in matte finish about style type is modern. Arms : armrest

is having two adjustment heights (up & down) .use of ply: 12 mm thick hot pressed bwr plywood (is grade - 303 for seat).seat: 40

± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in seat , back : frame of design

shall be curved made of two pieces injection moulded frame cover with mesh .backrest support adjustable lumbar support

mechanism: self-weighted multi locking mechanism .only seat size is 500mm(l)x 500mm(d)x 540-440mm(h) & the back size is

480mm(l)x 570mm(h) seat maximum height is 540mm & minimum height is 440mm & back height from floor maximum

height is 1100mm & minimum height is 1000mm .gas lift 100 mm telescopic haudraulic base: 650 mm chrome prong base is

620mm pitch centre dia (660mm with castors) .The product should be from manufacturer(OEM) which have BIFMA

COMPLIENT Certification, INDIAN DESIGN MARK Certification, GREEN PRO Certification, AIOTA Certification, BIFMA

LEVEL-1 Certification, GRIHA Certification and from the approved make of Durian, Godrej,HNI. The product should be as per

above given specification under the guidance of project architect & Engineer in charge.

9 Meeting table

Dimension: 2100mm(L) X 1200mm(D) X 750mm(H) 1 nos 62,539 62,539

Supplying & placing in position of table as per image/drawing. Table top is made up of 25mm thk. Prelaminated Particle board

of approved shade. All working or non working edges are provided with machine pressed 2mm thick PVC edging using special

hot melt glue. Tabletop supported with smart series "Slant" shape leg made of CRCA of 1.2mm thick of size 50 x 50mm with

powder coating of 50-60 micron & horizontal connectors made of CRCA of 1.2mm thick of size 50mm x 25mm with powder

coating of 50-60 micron. Wire management: 6 Module fliptop box (without switch socket) above table with below metal raceway

& poles are included with powder coated finish. The product should be from manufacturer(OEM) which have BIFMA

COMPLIENT Certification, INDIAN DESIGN MARK Certification, GREEN PRO Certification, AIOTA Certification, BIFMA

LEVEL-1 Certification, GRIHA Certification and from the approved make of Durian, Godrej,HNI. The product should be as per

above given specification under the guidance of project architect & Engineer in charge.

Digitally signed by AMIT

10 Medium Height Chair for Meeting room 8 nos 19,261 1,54,090

Supplying & placing in position of medium back 360°-degree revolving chair all over size is: 640mm(l)x 670mm(d)x

1100mm(h), The chair made of full mesh in black colour.it will come in matte finish about style type is modern. Arms : armrest

is having two adjustment heights (up & down) .use of ply: 12 mm thick hot pressed bwr plywood (is grade - 303 for seat).seat: 40

± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in seat , back : frame of design

shall be curved made of two pieces injection moulded frame cover with mesh .backrest support adjustable lumbar support

mechanism: self-weighted multi locking mechanism .only seat size is 500mm(l)x 500mm(d)x 540-440mm(h) & the back size is

480mm(l)x 570mm(h) seat maximum height is 540mm & minimum height is 440mm & back height from floor maximum

height is 1100mm & minimum height is 1000mm .gas lift 100 mm telescopic haudraulic base: 650 mm chrome prong base is

620mm pitch centre dia (660mm with castors) .The product should be from manufacturer(OEM) which have BIFMA

COMPLIENT Certification, INDIAN DESIGN MARK Certification, GREEN PRO Certification, AIOTA Certification, BIFMA

LEVEL-1 Certification, GRIHA Certification and from the approved make of Durian, Godrej,HNI. The product should be as per

above given specification under the guidance of project architect & Engineer in charge.

11 Conference table

Dimension (W) 6000mm X (D) 600mm X (H)750mm (overall depth 3000mm) 1 nos 6,64,054 6,64,054

Supplying and placing in position of conference table as per image/drawing. The work surface top should be of thickness 36mm

top prelaminated particle board with 2mm thick PVC edge banding. The side panel are made up of 25mm thick prelaminated

particle & modesty panel are made out of 18mm thick prelaminated particle board with 2mm thick PVC edge banding. The wire

carrier should be made from 0.6mm thick CRCA & powder coated 40-50 microns. Also having a provision of 6 module flip top

box& metal raceway for wire flow. The product should be from manufacturer(OEM) which have BIFMA COMPLIENT

Certification, INDIAN DESIGN MARK Certification, GREEN PRO Certification, AIOTA Certification, BIFMA LEVEL-1

Certification, GRIHA Certification and from the approved make of Durian, Godrej,HNI. The product should be as per above

given specification under the guidance of project architect & Engineer in charge.

12 Main Chair for Conference 1 nos 36,459 36,459

Supplying and placing in position of high back 360°-degree revolving chair all over size is: 590mm(l)x 505mm(d)x 1280mm(h)

as per image, the chair made of full leatherette in black colour.it will comes in matte black finish in contemporary style. Arms:

chrome finish arms with pu padding. Use of ply: 12 mm thick hot pressed bwr plywood (is grade - 303 for seat and back). Seat:

40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in seat, back: 40 ± 2 mm

thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in back. backrest support foam design

based on symmetrical lumbar support mechanism: knee tilt mechanism. Only seat size is 505mm(l)x 505mm(d)x 610mm(h) &

the back size is 590mm(l)x 710mm(h)seat maximum height is 610mm & minimum height is 510mm & back height from floor

maximum height is 1280mm & minimum height is 1180mm gas lift 100 mm telescopic haudraulic base: 650 mm chrome base

with smooth castors.The product should be from manufacturer(OEM) which have BIFMA COMPLIENT Certification, INDIAN

DESIGN MARK Certification, GREEN PRO Certification, AIOTA Certification, BIFMA LEVEL-1 Certification, GRIHA

Certification and from the approved make of Durian, Godrej,HNI. The product should be as per above given specification under

the guidance of project architect & Engineer in charge.

13 Visitor Chair for Conference 11 nos 34,397 3,78,362

Digitally signed by AMIT

Supplying and placing in position of low back 360°-degree revolving chair all over size is: 660mm(l)x 505mm(d)x 1105mm(h) as

per image, the chair made of full leatherette in black colour .it will come in matte black finish in contemporary style. Arms:

chrome finish arms with pu padding. Use of ply: 12 mm thick hot pressed bwr plywood (is grade - 303 for seat and back). seat:

40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in seat, back: 40 ± 2 mm

thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in back. backrest support foam design

based on symmetrical lumbar support mechanism: knee tilt mechanism. only seat size is 525mm(l)x 525mm(d)x 610mm(h) &

the back size is 660mm(l)x 570mm(h) seat maximum height is 610mm & minimum height is 510mm & back height from floor

maximum height is 1105mm & minimum height is 1005mm gas lift 100 mm telescopic haudraulic base: 650 mm chrome base

with smooth castors.The product should be from manufacturer(OEM) which have BIFMA COMPLIENT Certification, INDIAN

DESIGN MARK Certification, GREEN PRO Certification, AIOTA Certification, BIFMA LEVEL-1 Certification, GRIHA

Certification and from the approved make of Durian, Godrej,HNI. The product should be as per above given specification under

the guidance of project architect & Engineer in charge.

14 Table for NOC Room

Dimension(L)4600mm X (W)450mm X (H)750mm 13 nos 1,69,196 21,99,552

Dimension(L)3900mm X (W)450mm X (H)750mm 5 nos 1,52,414 7,62,072

Supplying, and placing in position of table as per image/drawing.The Table top are made out of 25mm thk prelam particle board

with 2mm thk pvc edge banding with ms powder coated "C" shape legs of size 50mm x 50mm. Comprising of metal powder

coated cross connectors of size 50mm X 25mm.Providing metal wire raceway & junction box for connectivity of wires & cables.

Also having a provision of 6 module fliptop box cover.The product should be from manufacturer(OEM) which have BIFMA

COMPLIENT Certification, INDIAN DESIGN MARK Certification, GREEN PRO Certification, AIOTA Certification, BIFMA

LEVEL-1 Certification, GRIHA Certification and from the approved make of Durian, Godrej,HNI. The product should be as per

above given specification under the guidance of project architect & Engineer in charge.

15 Chair for NOC Room 61 nos 15,396 9,39,152

Supplying and placing in position of fix cantilever chair all over size is : 590mm(l)x 630mm(d)x 970mm(h) as per image, the

chair made of full mesh in black colour .it will comes in matte finish in contemporary style .arms : pp fixed padded armrest .use

of ply: 12 mm thick hot pressed bwr plywood (is grade - 303 for seat).seat: 40 ± 2 mm thick polyurethane foam with density 32

(±3) kg per cu meter for best quality cushioning in seat , back : frame of design shall be curved made of two pieces injection

moulded frame cover with mesh .backrest support adjustable lumbar support fixed cantilever chair .base : m.s powder coated

tubular frame of cantilever type The product should be from manufacturer(OEM) which have BIFMA COMPLIENT

Certification, INDIAN DESIGN MARK Certification, GREEN PRO Certification, AIOTA Certification, BIFMA LEVEL-1

Certification, GRIHA Certification and from the approved make of Durian, Godrej,HNI. The product should be as per above

given specification under the guidance of project architect & Engineer in charge..

21 L-shape workstation

Dimesnion: 1500mm(L) x 1500mm(L) x 600mm(D) x 1050mm(H) 18 nos 85,666 15,41,982

Digitally signed by AMIT

Supplying, and placing in position of workstation as per Image.The worktop made out of 25mm thk. Prelam Particle board with

2 mm thk PVC edge banding.The Table top supported on Mild Steel of size 50mm x50mm Slanted Leg and 50mm x 25mm

Horizontal connectors with Powder coating of 50 Micron.Middle Leg :- 0.8 mm thk Metal panel fixed on both side of the "T" leg

for Vertical wire carrying purpose.(Sharing Workstation). 0.8 mm thk Single/Double metal powder coated raceway with Powder

coating of 50 Micron below top for wiring.Vertical wire carrying pole with powder coating 50 micron below top for wiring( Non-

sharing workstation ). Also having a provision of 0.8mm ms perfoated sheet hanging modesty. provision of 10mm thk glass

divider rest on the "D" brackets on the table top between opposite seatings. All working or non working edges shall be provided

with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. Also a provision of Pedestal Unit

(size:- L-400mm x D-450mm x H-600mm) with a combination

of 2 drawer & one filing drawer. The pedestal storage unit shall be made of 18 mm thick prelaminated Particle board with

provision of handles & Locking arrangement. Provision of pullout PVC keyboard tray and CPU trolley for each seating.Provision

of glass divider between two seating. The product should be from manufacturer(OEM) which have BIFMA COMPLIENT

Certification, INDIAN DESIGN MARK Certification, GREEN PRO Certification, AIOTA Certification, BIFMA LEVEL-1

Certification, GRIHA Certification and from the approved make of Durian, Godrej,HNI. The product should be as per above

given specification under the guidance of project architect & Engineer in charge.

22 Linear workstation

Dimesnion: 1200mm(L) x 600mm(D) x 1050mm(H) 10 nos 64,435 6,44,349

Supplying, and placing in position of workstation as per Image.The worktop made out of 25mm thk. Prelam Particle board with

2 mm thk PVC edge banding.The Table top supported on Mild Steel of size 50mm x50mm Slanted Leg and 50mm x 25mm

Horizontal connectors with Powder coating of 50 Micron.Middle Leg :- 0.8 mm thk Metal panel fixed on both side of the "T" leg

for Vertical wire carrying purpose.(Sharing Workstation). 0.8 mm thk Single/Double metal powder coated raceway with Powder

coating of 50 Micron below top for wiring.Vertical wire carrying pole with powder coating 50 micron below top for wiring( Non-

sharing workstation ). Also having a provision of 0.8mm ms perfoated sheet hanging modesty. provision of 10mm thk glass

divider rest on the "D" brackets on the table top between opposite seatings. All working or non working edges shall be provided

with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. Also a provision of Pedestal Unit

(size:- L-400mm x D-450mm x H-600mm) with a combination

of 2 drawer & one filing drawer. The pedestal storage unit shall be made of 18 mm thick prelaminated Particle board with

provision of handles & Locking arrangement. Provision of pullout PVC keyboard tray and CPU trolley for each seating.Provision

of glass divider between two seating. The product should be from manufacturer(OEM) which have BIFMA COMPLIENT

Certification, INDIAN DESIGN MARK Certification, GREEN PRO Certification, AIOTA Certification, BIFMA LEVEL-1

Certification, GRIHA Certification and from the approved make of Durian, Godrej,HNI. The product should be as per above

given specification under the guidance of project architect & Engineer in charge.

23 Workstation chair 28 nos 18,403 5,15,297

Supplying and placing in position of medium back 360° degree revolving chair all over size is: 610mm (l) x 470mm (d) x

1040mm (h) as per image. The chair made of full mesh in black colour .it will comes in matte finish in contemporary style. Arms:

armrest is having two adjustment heights (up & down).use of ply: 12 mm thick hot pressed bwr plywood (is grade - 303 for

seat).seat: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in seat , back :

frame of design shall be curved made of two pieces injection moulded frame cover with mesh .backrest support adjustable

lumbar support, mechanism: self weighted multi locking mechanism, gas lift 100 mm telescopic haudraulic base: 650 mm

chrome base with smooth castors .The product should be from manufacturer(OEM) which have BIFMA COMPLIENT

Certification, INDIAN DESIGN MARK Certification, GREEN PRO Certification, AIOTA Certification, BIFMA LEVEL-1

Certification, GRIHA Certification and from the approved make of Durian, Godrej,HNI. The product should be as per above

given specification under the guidance of project architect & Engineer in charge.

Digitally signed by AMIT

Total Amount 92,68,394

Total Amount 92,68,394

Digitally signed by AMIT

S.No. 2022 Description Unit QTY Dsr Rate MR rate DSR Amount MR Amount

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe

conforming to IS 3589/IS:1239 including Welding, fittings like elbows, tees,

flanges,tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with

suitable clamp/support frame and painting with two or more coats of synthetic

enamel paint of required shade complete as required : (Above Ground)

18.7.2 32 mm nominal bore (class C) Rm 40 851.00 34,040.00

18.7.1 25 mm nominal bore (class C) Rm 80 744.00 59,520.00

18.21 Providing, fixing, testing & commissioning of 15mm dia uartzoid bulb type

sprinklers of rating 68 degree centigrade with required accessories :

18.21.1 Pendent Sprinkler Nos. 50 522 26100

Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL

Listed) of stainless steel complete with 15 NPT on reducer thread with

maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with

branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT

female thread with reducer, nipple, 2 side brackets, center bracket, stockbar

of following sizes complete as

18.25 required.

Providing & Fixing of stored pressure Fire Extinguisher ABC powder type (Mono

Ammonium Phosphate Powder) Magnetic Pressure Gauge having the facility

to check at site, Discharge Time less than 9 Secs, Controllable discharge

mechanism, Range minimum 4 Meters, applicable on Class A,B,C and

electrically started Fire, A Rating- 21A, B Rating 55B as per BS EN-3 BIS 15683

marked, Can Construction : Deep drawn & CO2 Mig welded, Valve

Construction : Forging & Machining, Internal Coating of Can : Epoxy Powder

coating, External Coating ofCan : Epoxy Polyster Powder coating, Sheet

metal thickness : 1.60MM, Helium LeakDetection Tested, Warranty.

Capacity 6 Kg. Nos. 20 2700 54000

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V RM

rated with annealed copper conductor having XLPE insulation, steel wire

armouring & FRLS outer sheath complete as required.

Digitally signed by AMIT

Supplying, installation, testing & commissioning of intelligent Nos.

17.2.9 addressable thermal detector with rate of rise cum fixed tempreature 30.00

thermistor complete with base as required 2726 81780

Supplying, installation, testing & commissioning of intelligent analog Pcs

addressable photothermal detector complete with mounting base

complete as required.

Supplying, installation, testing & commissioning of addressable manual Pcs

17.2.14 call point complete as required. 5.00 3,871.00

Supplying, installation, testing & commissioning of addressable horn Pcs

17.2.15 cum strobe complete as required. 5.00 3,506.00

Supplying, installation, testing & commissioning of fault isolator Pcs

complete with base as required. 16350

Supplying, installation, testing & commissioning of response indicator on Pcs

surface/recessed MS Box having two LED, metallic cover complete with

17.2.5 all connections etc as required. 20.00 276.00

MR Supplying & Fixing of battery operated illiminated "EXIT" signage,

with 2hrs power Battery backup complete as required. Nos. 5 2000 10000

Supplying, installation, testing and commissioning of micro processor based

intelligent addressable main fire alarm panel, central processing unit with the

following loop modules and capable of supporting not less than 240 devices

(including detectors) and minimum 120 detectors per loop and loop length up to 2

km, network communication card, minimum 320 character graphics/ LCD display

17.2.1 with touch screen or other keypad and minimum 4000 events history log in the non

volatile memory (EPROM), power supply unit (230 ± 5 % V, 50 hz), 48 hrs back-up

with 24 volt sealed maintenance free batteries with automatic charger. The panel

shall have facility to connect printer to printout log and facility to have seamless

integration with analog/digital voice evacuation system (which is part of the

schedule of work under SH: PA System) and shall be complete with all accessories.

The panel shall be compatible for IBMS system with open protocol BACnet/

Modbus over IP complete as per specifications.

17.2.1.1 Ten loop panel Nos. 1 455534 455534

Add GST factor @1.0633 on DSR items ₹ 11,19,419.91

Add CPWD cost index @1.10 on DSR E&M 2022 ₹ 12,31,361.90

Digitally signed by AMIT

Add Labour cess @0.973 as per CPWD circular ₹ 11,98,115.13

Digitally signed by AMIT

S.No. DSR E&M 2022Description Unit Qty DSR Rate MR DSR Amount MR Amount

AIR DISTRIBUTION SYSTEM

GSS DUCT (Site Fabricated Duct)

Supply, installation, balancing and commissioning of fabricated at site GSS

sheet metal rectangular/round ducting complete with neoprene rubber

1.0 gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per

approved drawings and specifications of following sheet thickness complete

a 16.12.2.1 Thickness 0.63 mm sheet Sqmt 420 1058 444360

b 16.12.2.2 Thickness 0.80 mm sheet Sqmt 120 1229 147480

c 16.12.2.3 Thickness 1.0 mm sheet Sqmt 20 1629 32580

2.0 Supply Air Grilles

Supplying & fixing of powder coated extruded aluminium Supply Air Grilles

16.15 with Aluminium volume control dampers of various sizes and as per Sqmt 20 9,105 182100

specifications and approved drawings and schedules.

3.0 Return Air Grilles

Supplying & fixing of powder coated extruded aluminium Return Air Grilles

with louvers but without volume control dampers of various sizes and as per

specifications and approved drawings and schedules.

4.0 EXHAUST/FRESH AIR LOUVERS

Supplying, Installing, testing and commissioning of powder coated extruded

aluminium exhaust air louvers with min.60 % free area, with metallic frame

work & fixing accessories, to be fixed on external wall to exhaust air from

basement area to ambient , it shall be suitable for exhausting required air in Sqmt 16 6164 98624

CFM . Louvers need to be suitable in order avoid rain water entry in to

basement @ 15 degree deflection with bird screen complete as per

specification approved drawings and schedules.

5.0 Supply Air Diffusers

Supply , installation , testing and commissioning of supply air diffusers of

Powder coated Aluminium with Aluminium volume control dampers with anti

smudge ring and removable core. Diffusers shall be as per specification &

the sizes will be as per drawings and schedules :

6.0 Return Air Diffusers

Supply , installation , testing and commissioning of return air diffusers of

Powder coated Aluminium without volume control dampers with anti

smudge ring and removable core. Diffusers shall be as per specification &

the sizes will be as per drawings and schedules :

Digitally signed by AMIT

7.0 COLLAR DAMPER

Supplying, installing, testing & commissioning of GI collar damper with

minimum 1.6 mm flange and 1.8 mm blade thickness within ducts to be

provided with suitable links, levers and quadrants for manual control of

MR Sqmt 6 7,383

volume of air flow and for proper balancing of the air distribution system as

per schedules & drawings.

8.0 Motorised Volume Control Damper

Supply, installation, testing and commissioning of motorised(ON/OFF Type)

duct mounted opposed blade G.I volume control damper with enthalpy

16.14 sensor and necessary control wiring (minimum 1.5 sqmm ) for integeration

within IDU room.The unit shall provided as shown in the drawings. The unit shall

be capable to communicate with BMS system.

b 16.14.2 Actuator Each 4 8794 35176

9.0 Fire Damper

Supplying, Fixing,testing and commissioning of fire damper in supply air

duct/main branch and return air path as and where required of required sizes

i/c control wiring, the damper shall be motorized and spring return so as to

close the damper in the event of power failure automatically and open the

same in case of power being restored. The spring return action shall be inbuilt

mechanism and not externally mounted. the damper shall also be closed in

the event of fire signal complete as required and as per specifications.

a 16.20.1 Fire damper sqmt 6 10659 63954

b 16.20.2 Actuator (Rated torque-10 N.m/m2) Each 8 9948 79584

10 CHAPTER 4: INSULATION & ACOUSTIC

DUCT INSULATION

Supply and installation of cross linked closed cell Oxide Acetate Foam

Thermal insulation on ducts having density 0f 30 to 33 Kg/ M³ ,having K value

0.029 W/m ° K at 40°C Deg temp and temp range of -70°C to +100°C and fire

rating Class O as per BS 476 Part 6 from CBRI,Roorkee as per the approved

specifications. Smoke & Toxicity index of material shall be passed as per IMO

MSC 307 ( 88 ) 2010 Anexx 1 Pt 2.• Material shall be CFC/ HCFC free as per US

13mm thick insulation oxide acetate foam laminated with aluminium foil for

a MR Sqmt 430 597

supply air duct 256779.875

11.0 DUCT ACOUSTIC LINING

Digitally signed by AMIT

Supply and installation of cross linked open cell acco isolate acoustic

insulation for duct having density of 30 to 55 Kg/ M³ ,having K value 0.029

W/m ° K at 40°C Deg temp and temp range of -70°C to +100°C and fire

MR rating Class O as per BS 476 Part 6 from CBRI,Roorkee as per the approved

specifications. Smoke & Toxicity index of material shall be passed as per IMO

MSC 307 ( 88 ) 2010 Anexx 1 Pt 2.• Material shall be CFC/ HCFC free as per US

a 25mm thickacco isolate acoustic open cell insulation Sqmt 125 814 101789.0625

12.0 DOUBLE LAYER CANVAS CONNECTION

Supply,Installation,testing and commissioning of double Layer canvas

connection fire retardant cloth for the end connection of Ductable

Units/AHUs and Ventilation fan to reduce the vibration.It shall be fire rated for

atleat 2 hrs. Refer tender specification for detail description

13 CHAPTER 5: VENTILATION SYSTEM

Supply , installation , testing and commissoning , of duct mounted inline fans

complete with direct driven centrifugal fan , TEFC squirrel cage induction

motor , with efficiency class IE-3 whichever is higher , direct drive

a arrangement , heavy gauge sheet metal casing , rubber isolator mounts and

other accessories.The fan shall be complete in all respect and should match

the specification ,Drawings and Schedule. Inline fans shall be of following

1100 CFM (15 mm Static Pressure) Nos. 1 21361 21361.0455

Air Balancing and testing commissioning of work job 1.00 38,001.25 38001.25

Add GST factor 1.0633 on DSR Items ₹ 17,30,044.39

Add CPWD cost index @1.10 on DSR E&M 2022 1903048.83

Add Labour cess @0.973 as per CPWD circular 1851666.512

Digitally signed by AMIT

S.No. 2022 Description Unit qty DSR rate MR Rate DSR Amount MR Amount

supplying and drawing of UTP 4 Pair CAT6 LAN Cable in the existing surface/recessed steel/PVC conduit as required

Ceiling speaker

Supply, Installation, testing and commissioning of 6.5" two-way coaxial thin edge ceiling loudspeaker, 100V transformer power

taps : 24,12,6, watts, Conical dispersion : 145° or more, impedance : 8, low impedance RMS continous power : 30watts, frequency

range : 50 Hz - 20 kHz or better, frequency response : 60Hz - 20KHz or better etc complete required as per specifications. 16 for 20 17700 354000

NOC Room & 4 for confrence room

Supply, Installation, testing and commissioning of Dual channel Amplifier, 2 X 240watt or more, THD+N (@ 1 kHz) : < 0.3%,

Technology : Class-D, Common mode rejection ratio : 70dB or better, Temperature controlled FAN, Switching mode power

supply, should have Protection features like : DC Short circuit & Over heating & Over load & Signal limiting etc, Built-in high 2 165200 330400

pass filter and gain adjustment option etc complete required as per specifications.

MR 9U Wall Mount Rack with Accessories Nos. 2 19428 38856

Supply, installation, testing and commissioning of chairman microphone units comprising digital desktop conference

microphones constructed with aluminum alloy panel or better, incorporating directional electret mic capsules with frequency

response of 30Hz–20kHz or better, signal-to-noise ratio (SNR) greater than 90dB or better, dynamic range of 96dB or better,

total harmonic distortion (THD) less than 0.05% or better, and sensitivity of -37dB±2dB or better; each unit should operate on

24V DC±5% supplied by the conference host, support a pickup distance of at least 50cm, and include a 3.5mm earphone

monitoring jack; connectivity via RJ45 (Cat6) with LILO or junction connectors, supporting system expansion up to 264 units or

better, and accommodating 1–6 speakers per channel with custom ID numbering; units must feature Class D speakers rated at

2W or better, support intelligent audio detection and automatic phase attenuation to prevent howling, and be fully compatible

with PC conference management software for various speech and permission modes

Supply, installation, testing and commissioning of delegate microphone units, digital desktop conference microphones with

aluminum alloy panel or better, integrated video tracking capability, and built-in Class D speaker rated at 2W or better; each

unit shall utilize a heart-shaped directional electret mic capsule with a frequency response of 30Hz–20kHz or better, signal-to-

noise ratio (SNR) greater than 90dB or better, dynamic range of 96dB or better, total harmonic distortion (THD) less than 0.05%

or better, and sensitivity of -37dB±2dB or better; microphones must comply with IEC 60065 or better, operate on 24V DC±5%

supplied by the conference host, and support a pickup distance of at least 50cm; monitoring via 3.5mm earphone jack should be

provided; connectivity shall be through RJ45 (Cat6) with LILO or junction connectors.

Supply, installation, testing and commissioning of Conference Central Controller, which should have a robust metal chassis and

equipped with a 2.8" LCD color display for independent system setting and monitoring; the controller should support a minimum

of 180 conference units via 4-channel 8PIN and 2-channel RJ45 network interfaces, expandable up to 500 units or better; audio

input options must include RCA×2 (+20dB) and XLR×1 (+10dB), with audio output via main RCA×2 (+20dB), auxiliary RCA×2

(+20dB), and balanced XLR×1 (+10dB) or better; video input should provide at least RCA×3, with video output via RCA×5,

supporting SD camera integration and built-in 4×4 standard definition video matrix switching with 3-channel video loop-out; the

controller must offer application speaking mode, queuing mode, computer permission mode, and speech time limit mode, all

configurable through PC conference management software; built-in DSP digital audio module should provide adaptive feedback

suppression, digital equalizer, and automatic gain control for optimal audio quality, minimizing interference, distortion, and

crosstalk; the system shall support ID addressing to prevent address conflicts and allow custom unit numbering; U disk

recording functionality must be availabl

Supply, installation, testing and commissioning of audio digital signal processor , supporting 24-bit/48 kHz audio processing and

providing at least 4 analog inputs and 4 analog outputs, with 4x4 Dante/AES67 digital audio networking. The DSP must offer

advanced processing functions including independent adaptive feedback suppression, full-duplex acoustic echo cancellation

(AEC), automatic noise suppression (ANS), automatic gain control (AGC), automatic mixing control (AMC), and a comprehensive

audio mixing matrix with input level control, centrally controllable via RS-232/LAN configuration, as well as compatibility with

software-programmable wall panels. It must include a built-in dual-channel USB sound card for recording, broadcasting, and

conferencing, and support both PoE (48V) or DC 12V power supply. The processor should have selectable input gain levels from 0

to 48 dB, system delay less than 3 ms, and provide +48V phantom power for microphones. The frequency response shall be from

20 Hz to 20 kHz and maximum output level of +18 dBu

Digitally signed by AMIT

SITC of 29-29.5 ft x 8.85-8.9 ft Indoor LED Display Wall based on Micro in Packages (MIP) Technology/Flip chip RGB LED, Pixel

Pitch 1.25-1.26 mm, Pixel Density 640,000 pixels/m² or betterBrightness ≥ 800 cd/m² Dimming Capability 0–255 Levels or higher

Contrast Ratio 20,000:1 or better Refresh Rate ≥ 3840 Hz Color Processing 16-bit or better

Display Colors 280 Trillions Viewing Angle Horizontal: ≥ 160°, Vertical: ≥ 160° Lifetime 100,000 hours or better Power Input AC

100V – 240V Max. Power Consumption 275 W/sqm or lower Redundancy Dual Power Supply and Dual Signal Input Operating

Temperature 0°C ~ 40°C Operating Humidity 10% ~ 90% RH Service Access Front Access

IP Rating Front: IP30 Certifications Valid BIS Certificate to be provided LED Controller & Video Processor - USB/RJ45 Control

Port - DVI/HDMI Signal Input - RJ45 Signal Output

- 3840 x 2160 Resolution Supported -Windo Based Processor to Control Required Display With 16 DVI/HDMI Inputs along with

Necessary Software Processor Specifications - Based on Server Architecture - Windows 10 or higher (64-bit) - Intel Xeon / i5 / i7

or better - 8 GB or higher RAM - 500 GB or higher HDD with RAID - Dual Redundant Power Supply

- Dual LAN Port Power Distribution System OEM Supplied with proper protection and redundancy

AMC Comprehensive AMC for 5 years included in the quoted price

MR The price of AMC For 05 year is included in the Price

SITC of interactive flat panel display should be a minimum of 86 inches with 4K UHD resolution (3840 × 2160), 400 cd/m²

brightness, and infrared (IR) touch technology supporting at least 20-point multi-touch with ≤10ms response time. It should

include anti-glare, 4mm tempered glass, run on Android 8.0 or higher with at least 4GB RAM and 32GB storage, and offer

multiple input options including HDMI, USB, VGA, LAN, RS232, and an OPS slot. Built-in 2 × 20W speakers, wireless screen

sharing, digital whiteboard, and file viewing capabilities (PDF, Word, PPT, etc.) are required. The unit must be supplied with

passive pens, remote, wall mount kit, necessary cables, and include a minimum 3-year onsite warranty with local service support

and a 48-hour response time.

Supply and Installation of OPS Intel Core i5 12th Generation 8GB DDR4, 256 GB SSD WIFI BT Windows 11 Pro License,

Preloaded Nos. 1 44036 44036

SITC of 43" 4k, UHD Professional Signege Display with 500 NITS, Built-in SOC/ Media Player with Quad Core

Processor, Built in Open Platform , Surface Haze 28%,With Built in Bluetooth, 3X HDMI 2.0, Audio Input Audio Output,

Built in Speaker(10W x 2) ;Including mounting bracket, Built-in Chromecast, Dolby Digital audio, The built-in SOC is powered

by Google's Android OpenPlatform, 2 USB(2.0), 3*HDMI(2.0 Side), Headphone Out, 1 *RJ 45, SPDIF out, Built In 2.4

GHZ Wifi,CPU Built in With Cortex-A55*4, 1.1 GHz Processer, 2 GB RAM & 16 GB Storage, 20 W built speakers

Complete with standard accessories as required

Supply & Installation of CAT 6 1G speed UTP jack information outlets complying fully or exceeding with category 6 connecting Each 360.00 216.00

hardware specifications for all pair combinations up to 250 MHz. Outlets shall use lead frame technology 77760

Supply & Installation of Cat 6 UTP 23 AWG multi core Patch Cord - 1 mtr terminated with RJ-45 modular plugs on both ends and Each 360.00 216.00

having phosphor bronze contact blade. Maximum insulation resistance shall be 35m ohms. The patch cords shall be conforming to

ANSI/ TIA/ EIA-568-C.2 standards and certified by ETL.

Supply & Installation of Cat 6 UTP 23 AWG multi core Patch Cord - 2 mtr terminated with RJ-45 modular plugs on both ends and having Each 360.00 255.00

phosphor bronze contact blade. Maximum insulation resistance shall be 35m ohms. The patch cords shall be conforming to ANSI/ TIA/

EIA-568-C.2 standards and certified by ETL. complete as required and as per technical specifications.

Supply, Installation, Testing & Commissioning of LSZH Cat 6-1G speed unshielded twisted pair computer cable with 23 AWG solid Mtr 7,000.00 43.00

copper conductors in existing concealed / surface conduits / Raceways

Supply & Installation of Cat 6 Modular Jack Panels for accommodating 24 port termination and shall facilitate cross-connection and Each 15.00 7,472.00

inter-connection using modular patch cords and shall conform to EIA standard, 19-inch relay rack mounting requirements. Patch Panel

shall come with preloaded information outlets .Panel shall have label holders and designation labels as part of the standard device.

Shall also come with rear cable management metallic tray with velcro ties complete as required and as per technical specifications.

Supply, Installation, Testing & Commissioning of 1, 2 and 4 port face plate, British Style with Shutter, 2 Plate system clear finish with Nos. 360.00 132.00

transparent labelling, ABS-UL94-V2, ROHS Compliant, in accorandce with standards like ANSI/TIA-568-C.2, ISO/IEC 11801:2002

AMMD.2:2010, YD/T 926.3-2009 & ISO/IEC 60603-7 white for I/O fixing at user side. 47520

Supply, Installation, Testing & Commissioning of 48 Port 10/100/1000Mbps POE & 2 ports for optional SFP+/ LR Modules supporting Nos. 9.00 77832

10G, layer 2 switch (Non blocking switch fabric, IPv6 ready), supports IGMPv2/3 & Multicasting Layer 2 and basic L3

Digitally signed by AMIT

Supply, Installation, Testing & Commissioning of 22 U floor mount rack with fans , 2 cable managers , satationary shelf , 2 Nos. of Nos. 1.00 43,545.00

LASER PRINTER- HP Laser 1008a Printer, Single Function, Print, Hi-Speed USB 2.0, Up to 21 ppm, 150-sheet Input Tray, 100-

sheet Output Tray, 10,000-page Duty Cycle, 1-Year Warranty, Black and White Nos. 20 11000 220000

Printer type: Functions: Print, Scan, Copy ; Printer output: Monochrome ; Connectivity: USB ; Scanner: Yes ; Scanner

resolution: 600 x 600dpi

OS Compatibility: Windows 8 , Windows 7, Windows Vista , Windows XP , Windows 2000, Mac OS X 10.4 - 10.8, Linux ; Mobile

connectivity : No ; Hardware Interface: USB 2.0 Hi-Speed ; Enlarge/reduce option: No ; Duplex: No

Maximum Print Speed (color): NA ; Maximum Print Speed (Monochrome):18 ppm ; Print cost Monochrome: Rs 3.88 ; Print cost

color: NA ; Maximum Print Resolution:600 x 600 dpi

Page size : A4, B5, A5, Legal, Letter ; Max paper thickness: 64 to 275 GSM ; Maximum Input Sheet Capacity: 150 sheet (A4) ;

Compatible ink:Cartridge 925 ; Additional Printer Function: High speed printing ; Power wattage of printer: Maximum: 960W ,

During Operation: 450W, Standby: 2.5W, Sleep: 1.4W

Special Features: High Speed Printing ; Ideal Usage : Home Office, Office ; Included Components: Printer, Cartridge 925, User

Software CD-ROM, Getting Started Guide, Power Cord

Warranty - 1 year warranty from the date of purchase Nos. 6 16500 99000

Add GST factor 1.0633 on DSR Items ₹ 1,51,520.25

Add CPWD cost index @1.10 on DSR E&M 2022 166672.28

Add Labour cess @0.973 as per CPWD circular ₹ 1,62,172.12 ₹ 2,96,68,292.00

Digitally signed by AMIT

CAT-6 Voice Components Qty Rate Amount

1 Supply & Installation of CAT 6 1G speed UTP jack information outlets complying fully or exceeding with Each 120.00 216.00 25920.00

category 6 connecting hardware specifications for all pair combinations up to 250 MHz. Outlets shall use

lead frame technology

2 Supply & Installation of Cat 6 UTP 23 AWG multi core Patch Cord - 1 mtr terminated with RJ-45 modular Each 120.00 216.00 25920.00

plugs on both ends and having phosphor bronze contact blade. Maximum insulation resistance shall be

35m ohms. The patch cords shall be conforming to ANSI/ TIA/ EIA-568-C.2 standards and certified by ETL.

3 Supply & Installation of Cat 6 UTP 23 AWG multi core Patch Cord - 2 mtr terminated with RJ-45 modular Each 120.00 255.00 30600.00

plugs on both ends and having phosphor bronze contact blade. Maximum insulation resistance shall be

35m ohms. The patch cords shall be conforming to ANSI/ TIA/ EIA-568-C.2 standards and certified by ETL.

complete as required and as per technical specifications.

4 Supply, Installation, Testing & Commissioning of LSZH Cat 6-1G speed unshielded twisted pair computer Mtr 1,000.00 43.00 43000.00

cable with 23 AWG solid copper conductors in existing concealed / surface conduits / Raceways

5 Supply & Installation of Cat 6 Modular Jack Panels for accommodating 24 port termination and shall Each 5.00 7,472.00 37360.00

facilitate cross-connection and inter-connection using modular patch cords and shall conform to EIA

standard, 19-inch relay rack mounting requirements. Patch Panel shall come with preloaded information

outlets .Panel shall have label holders and designation labels as part of the standard device. Shall also

come with rear cable management metallic tray with velcro ties complete as required and as per technical

specifications.

6 Supply, Installation, Testing & Commissioning of 1, 2 and 4 port face plate, British Style with Shutter, 2 Nos. 120.00 132.00 15840.00

Plate system clear finish with transparent labelling, ABS-UL94-V2, ROHS Compliant, in accorandce with

standards like ANSI/TIA-568-C.2, ISO/IEC 11801:2002 AMMD.2:2010, YD/T 926.3-2009 & ISO/IEC 60603-7

white for I/O fixing at user side.

Digitally signed by AMIT

7 Supply, Installation, Testing & Commissioning of 24 POE Port 10/100/1000Mbps & 2 ports for optional Nos. 1.00 65000 65000.00

SFP+/ SR Modules supporting 10G, layer 2 switch with Stacking cable (Non blocking switch fabric,

IPv6 ready), supports IGMPv2/3 & Multicasting Layer 2 and basic L3

9 Supply and Installation IP Phone NOS 120 5364 643680.00

HD Voice 2.3 ” 132 x 64-pixel graphical LCD Two-port 10/100M Ethernet Switch PoE support One SIP

account Cradle Lesss Headset Local 5-way conferencing , Narrowband codec: G.711, G.723.1, G.726,

G.729AB, Full-duplex hands-free speakerphone, Stand with 2 adjustable angles, Wall mountable Handset. IP

phone shall supports abstrick

10 FACE Recognition access control

Facial Recognition Indoor/Outdoor Door Station, Compatible to Access Control RFID Cards typically feature

dimensions and materials standardized to credit card specifications, with varying RFID technologies (LF, HF,

UHF) for diverse security and memory needs, and are designed for durability and compatibility. RGBIR

Sensor, Face Priority Auto Exposure, 3.5" Capacitive Touch Screen, Wiegand / OSDP, I/O, SIP Audio Full

Duplex, PoE/12V DC. Includes 3 year (36 month) standard warranty and on prem configuration and

management software. Access Control System Software One time Perpetual License:

Facial Recognition Indoor/Outdoor Door Station, Compatible to Access Control RFID Cards

typically feature dimensions and materials standardized to credit card specifications, with varying

RFID technologies (LF, HF, UHF) for diverse security and memory needs, and are designed for

durability and compatibility. RGBIR Sensor, Face Priority Auto Exposure, 3.5" Capacitive Touch

Screen, Wiegand / OSDP, I/O, SIP Audio Full Duplex, PoE/12V DC. Includes 3 year (36 month)

standard warranty and on prem configuration and management software. Access Control System

Software One time Perpetual License:

Supply, Installation, Testing & Commissioning of Enterprise Version Access Control Software

including with 1 No of Client Version Application Software including with Readers & Access

Controller Liscences as per the Project requirements.

Digitally signed by AMIT

Face as Credential, Tailgateing detection, Liveliness Detection, Duel Factor Authentication (Face +

Card / Face + Key / Face + Mobile)

Technical Specification:

Biometrics: FAR (1:1 & 1:N): 0.0001%

General Electric:

Power Over Ethernet: PoE IEEE 802.3af, class 3

Power 12VDC @ 1A

Remote Wiring: PoE, OSDP, Wiegand, TTL, Relay

Wiring Connections: OSDP In/Out, Wiegand In/Out, TTL In/Out,

Certifications/Directives: FCC, CE, ROHS

Electromagnetic Immunity: CE

Security: IEC 62599-1, IEC62599-2

Safety: UL 294, UL 62368-1 Ed. 3 (outdoor) Preferred

Dimensions: 5.5" x 5.5" x 1.25" (14 x 14 x 3.1 cm)

Display Dimensions: 3.5" color capacitive touch

Color: Black/Gray

Material: Aluminum, chemically strengthened glass

Weight: 16 ounces (450 g)

Light Source: IR and LED internal

Operating Temp: -40F (-40C) to +140F (+60C)

Cold Start: -4F (-20C)

Humidity: 0% to 90% (non-condensing)

Storage Temp: -40F (-40C) to +140F (60C)

Transmission Protocols: IPv4, IPv6, TCP/IP, UDP, DHCP

Compression type: MJPEG, H.264, H.265

Network Encryption: TLS 1.2 and TLS 1.3 encryption, 802.1x port-based authentication

Video Output: RTSP

Speaker: 1.2W 86dB

Microphone: Omnidirectional

Streaming: 2-way, full duplex

Compression: G.711, 8 kHz

Digitally signed by AMIT

Access Control Requirements:

Input/Output: 2 programmable I/O, Form C relay

Protocols: Wiegand in/out, OSDP in/out

RF technology (*) (-RF models only except BLE): NFC, ISO14443, ISO15693, BLE

Card formats: 26-bit, 34-bit, 35-bit, 37-bit, custom up to 254-bits

Supports unlock through: Face and/or ID card, Face + Mobile, Face + Code

Supports facemasks: Yes

Mounting Height: 46 to 58 inches (115 to 150 cm)

Liveness (anti-spoofing): RGB, 3D structured light

QR Code: 2-dimensional bar codes

PKOC Mobile Credential: BLE Transmission, up to 48” away (in pocket)

Interoperability: PKOC for Mobile Credentials

Supports unlock through: Face, Mobile Credential, QR Code, Key Code

Privacy Store: biometric data on mobile device OR on door station database

Intent Detection: Yes

logic to open the electromatic lock should be integrated in a such a way that it should open in

case activation of any one F&G detector.Morever manual provision to open the gate from inside in

case of any power failure & emergency scenario should be consider Zero.

Dual Factor Authentication: Face + Mobile Credential, Face + Key Code, Face + Card

Keypad: Digital Keypad/Keycode/Scramble Supported

Total Amount ₹ 10,87,320.00

Total Amount ₹ 10,87,320.00

Digitally signed by AMIT

S No Description Unit Qty Unit price DSR Non-DSR Amount

1 MAIN SIGNAGE

Providing and fixing of Acrylic signage made of SQM 7 4000 28,000.00

3mm Acrylic with textured wood finish pasted

/White milky acrylic 3mm laser cut pasted on

top with proper names laser cut acrylic letters in

approved colour.Fixing provision using 3M VHP

double sided tape or as per direction of engineer in

Total 28,000.00