Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.1 LAccepted-AOC BYE PASS DALHOUSIE ROAD PATHANKOT 145001 PB | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L1 | Accepted-AOC L1 | |
| 2 | L2₹26.8 L+₹3.7 L (15.9%)Rejected-Finance | L2 | Rejected-Finance Other than L1 |
Tender Value
₹32 L
EMD Value
₹64,000
Closing Date
30 Sept 2023, 6:00 pmClosed
GE Satwari
GE Satwari Jammu
REPAIR/MAINT WATER SUPPLY DISTRIBUTION CI/DI/GI PIPES LINES AT DEFENCE COLONY Y STATION AND RIDGE RAULKI AREA UNDER AGE E/M OF GE SATWARI
2023_MES_614968_1
GEJM-53/2023-24
Open Tender
Civil Works
Item Rate
270 days
GE Satwari
D Class Cat a ii
9 documents required · 9 mandatory
₹500
GE Satwari
₹64,000
Yes
13 Nov 2023
31 Aug 2023
2 Oct 2023
31 Aug 2023
30 Sept 2023
15 Sept 2023
Amount
Attending of day to day complaints for external water supply system all type nature of complaints for pumping or rising main (above floor level) supply /distribution line and all types of control valves, rectification of the fault/leakage/blockage/damage/no water supply any type fault etc at OTM, KLP & Md accn of Defence Colony, Y Station and Ridge, Raulki Area as directed by MES rep of GE Satwari, including excavation of trenches/returning filling/removing of excavated surplus soil as required and providing of petty stores such as nuts, bolts, washer, rubber gasket fixing material to fix the GI pipe on wall (Ground floor to IIIrd floor) like hooks/screw etc as required complete all as directed at site to the entire satisfaction of Engr-in-Charge. NOTE: (i) Contractor/his representative shall attend MES service centre daily at 0900 hrs to note down the complaints from concern JE and shall submit complaince report at 1700hrs for the complaints given in the morning. (ii) Material required shall be paid at rates vide ser item No 03 to 34 here in after details of these items shall be entered in MB exact location of work where the item has been replaced. (iii) All type of T&P as requried at site for the work shall be arranged by the contractor under his own arrangements, cost deem to be included in quoted rates. (iv) A recovery @ of 500 - per day per complaint shall be recovered from the contractor if complaint given to the contrctor remains unattended/not rectified at the end of the day. (v) Contractor shall employee minium of one pipe fitter and two helper (for complaints) having adequated expreience with ITI certification course in the said field. (vI) Any type/size of pipe line above complaints to be attend and record in complain slip.
Supply & fixing in replacement of GI Elbow 15mm to 20mm bore ISI marked complete all as specified and directed.
Description all as per srl item No 02 but 25mm bore.
Description all as per srl item No 02 but 40/50mm bore.
Supply & fixing in replacement of GI elbow reducer 50/40X25/20/15mm bore. ISI marked complete all as specified and directed.
Description all as per srl item No 05 but 25X 20/15mm bore.
Supply & fixing in replacement of GI nipple 20mm/15mm bore and 6" long complete all as specified and directed.
Supply & fixing in replacement of GI nipple 25mm bore and 6" long complete all as specified and directed.
Supply & fixing in replacement of GI nipple 50mm bore and 6" long complete all as specified and directed.
Supply & fixing in replacement of GI nipple 20/15mm bore and 4" long complete all as specified and directed.
Supply & fixing in replacement of GI nipple 25mm bore 4" long complete all as specified and directed.
Supply& fixing in replacement of GI nipple 40/50mm bore 4" long complete all as specified and directed.
Supply & fixing in replacement of GI union 20/15 mm bore ISI marked complete all as specified and directed..
Description all as per srl item No 13 but 25mm bore.
Description all as per srl item No 13 but 40/50mm bore.
Supply & fixing in replacement of GI socket 20/15 mm bore ISI marked complete all as specified and directed.
Description all as per srl item No 16 but 25mm bore.
Description all as per srl item No 16 but 40/50mm bore.
Supply & fixing in replacement of GI Tee 20X20X20mm bore ISI marked complete all as specified and directed.
Description all as per srl item No 19 but 25X25X25mm bore.
Supply & fixing in replacement of GI Tee Reducer 20X20X15mm bore ISI marked complete all as specified and directed.
Description all as per srl item No 21 but 25X25X20/15mm bore.
Description all as per srl item No 21 but 50X50X25/20mm bore.
Supply & fixing in replacement of Lead wool complete all as specified and directed..
Supply & fixing in replacement of lead Pig complete all as specified and directed.
Supply & fixing in replacement of GI pipe medium grade ISI marked of size 15mm bore complete all as specified and directed.
Supply & fixing in replacement of GI pipe medium grade ISI marked of size 20mm bore complete all as specified and directed.
Supply & fixing in replacement of GI pipe medium grade ISI marked of size 25mm bore complete all as specified and directed.
Supply & fixing in replacement of GI pipe medium grade ISI marked of size 40mm bore complete all as specified and directed.
Supply & fixing in replacement of GI pipe medium grade ISI marked of size 50mm bore complete all as specified and directed.
Supply & fixing in replacement of GI pipe medium grade ISI marked of size 80mm bore complete all as specified and directed.
Supply & fixing in replacement of GI pipe medium grade ISI marked of size 100mm bore complete all as specified and directed.
Supply & fixing in replacement of Gland packing rope size 4/6mm complete all as specified and directed.
Excavation in trenches of soft/hard/dense soil n.exc 1.5 m wide and n.exc 1.5m in depth for foundation, laying of cables etc or for shaft wells, cesspits, manhole's, pier holes etc n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in any type of soil.
Returning filling in, trenches including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick in any type of soil complete all as specified
Removing excavated surplus materials to a distance not exceeding 50mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point.
Taking up cast iron water mains (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead of 100 mm bore and keeping aside for further disposal all as specified and directed.
Description all as per Srl item No 37 here in before but for 150mm bore pipe.
Supplying laying and testing ductile iron pipe 100mm bore spigot class K-7 as per IS-8329 with inside cement lined complete with push on rubber joints all as specified and directed by Engr-in-Charge. (Earth work for route change/joints shall be measured and paid for separately).
Supplying laying and testing ductile iron pipe 150mm bore spigot class K-7 as per IS-8329 with inside cement lined complete with push on rubber joints all as specified and directed by Engr-in-Charge. (Earth work for route change/joints shall be measured and paid for separately).
Supply and fixing upto 200 mm dia bore DI special such as bends, tees collars tail pieces conforming to IS-9523 complete all as specified and directed.
Cutting of existing cast iron pipe line upto 150 mm bore in position for inserting CI Special such as tees,bend,coller,tail piece etc for fixing of sluice valves/for branch connection etc. Note:- Exc & earth work, CI Special & sluice valves of size & lead joint shall be measured and paid separately under respective item of schedule 'A'.
Supply and fixing in replacement of cast iron body sluice valve heavy duty class PN 1.6 flanged ends any pattern with head wheel & brass spindle ISI marked conforming to IS-14846 of 2000 for 80mm bore pipe with jointing material ,flanged joint,rubber gasket 6mm thick, nuts & bolts, washer 10mm thick, including dismantling old one, all complete all as specified and directed.
Description all as per Srl item No 43 here in before but for 100mm bore pipe.
Description all as per Srl item No 43 here in before but for 150mm bore pipe.
Description all as per Srl item No 43 here in before but for 200mm bore pipe.
Supplying, laying, jointing & testing in replacement of galvanised steel tubing 15mm bore medium grade with screwed joint together with all fitting such as bends, elbows, tees, short pieces and union etc fixed to wall, ceiling, floor including taking out old unserviceable,cracked steel tubing including all fittings complete all as specified and directed.
Description all as per Srl item No 47 here in before but for 20mm bore pipe.
Description all as per Srl item No 47 here in before but for 25mm bore pipe.
Description all as per Srl item No 47 here in before but for 40mm bore pipe.
Description all as per Srl item No 47 here in before but for 50mm bore pipe.
Supplying, laying, jointing & testing in replacement of galvanised steel tubing 20mm bore medium grade with screwed joint together with all fitting such as bends, elbows,tees,short pieces and union etc laid in trenches including taking out old unserviceable,cracked steel tubing including all fittings complete all as specified and directed. Note:- Earth work shall be measured and paid separately under respective item of shedule 'A'.
Description all as per Srl item No 52 here in before but for 25mm bore pipe.
Description all as per Srl item No 52 here in before but for 40mm bore pipe.
Description all as per Srl item No 52 here in before but for 50mm bore pipe.
Description all as per Srl item No 52 here in before but for 80mm bore pipe.
Description all as per Srl item No 52 here in before but for 100mm bore pipe.
Supply and laying of under treanches MS pipe of size 150 mm bore both side flange ended in every three to six mtr length as per site requirement along with nut bolt and Washer as directed by Engr-in-charge.
Supply and fixing MS flange of size 150 mm dia bore complete all as specified and directed.
Supply and fixing MS steel Nuts, Bolts and washers of size 150/100 mm dia bore complete all as specified and directed.
Supply and fixing rubber sheets of size 150 mm dia bore complete all as specified and directed.
S & F end plate of iron sheet 6mm thick for 80MM (3 Inch) bore pipe with proper shape rubber gasket, Nut bolt & washes etc and other fixing materials complete all as specified and directed.
S & F end plate of iron sheet 6mm thick for 100MM (4 Inch) bore pipe with proper shape rubber gasket, Nut bolt & washes etc and other fixing materials complete all as specified and directed.
S & F end plate of iron sheet 6mm thick for 150MM (6 Inch) bore pipe with proper shape rubber gasket, Nut bolt & washes etc and other fixing materials complete all as specified and directed.
S & F end plate of iron sheet 6mm thick for 200MM (8 Inch) bore pipe with proper shape rubber gasket, Nut bolt & washes etc and other fixing materials complete all as specified and directed.
Burning out old leaking lead joints in position and removing old lead for 80mm bore CI pipe/ fittings and keeping aside for further disposal (earth work shall be measured and paid separately).
Description all as per Srl item No 66 here in before but for 100mm bore pipe
Description all as per Srl item No 66 here in before but for 150mm bore pipe
Description all as per Srl item No 66 here in before but for 200mm bore pipe
Material and labour for run lead joint including all jointing material such as lead, spun yarn etc for 80mm bore cast iron spigot & socketed pipe & fittings.
Description all as per Srl item No 70 here in before but for 100mm bore pipe & fittings
Description all as per Srl item No 70 here in before but for 150mm bore pipe & fittings
Description all as per Srl item No 70 here in before but for 200mm bore pipe & fittings
Making flange joints for 80mm MS Pipe with flange-02 Nos each pipe including Threading/welding seamless joints, suitable for nuts, bolts, packing material & lath work as per requirement of site and directed by Engr-in-Charge.
Description all as per Srl item No 74 here in before but for 100mm bore pipe
Description all as per Srl item No 74 here in before but for 150mm bore pipe
Description all as per Srl item No 74 here in before but for 200mm bore pipe
Making flange bend upto 100 mm MS Pipe with flange-02 Nos for each bend including MS Bend,suitable nuts,bolts,packing material,welding work & lath work as per requirement of site and directed by Engr-in-Charge.
Description all as per Srl Item No 78 but flange bend size of 150/200mm bore.
Material and labour for road cutting upto length of 06 to 07 mtrs depth 0.75 mtrs for laying CI/GI pipe including making good the excavated/disturbed portion by cement /PCC/Tar to match with the existing location/spot and removing excavated material, all as specified and directed.
Supply and fixing gun metal globe or gate valves with iron wheel head,screwed both ends for iron pipe of 15mm bore including taking out existing unserviceable gate valve, all as specified.
Description all as per Srl item No 81 here in before but for iron pipe of 20mm bore
Description all as per Srl item No 81 here in before but for iron pipe of 25mm bore
Description all as per Srl item No 81 here in before but for iron pipe of 40mm bore
Description all as per Srl item No 82 here in before but for iron pipe of 50mm bore
Material and labour for construction of one brick thich (23 cm) masonary valve pit built in cement mortar 1:4 of size 150cm x 120cm x150cm (internal dimension) over 15cm thick PCC 1:3:6 type C-2 sub base extended alround 15cm beyond external edge of brick work including plastering 15mm thick in cement mortar 1:4 internally and flush pointing to brick wall surfaces externally as work proceeds complete with MS sheet cover 10 SWG with handle,angle iron frame 40mm x 40mm x 6mm (grouting with anchor fasteners length not less than 15cm - 04 Nos) locking arrangement and painting complete all as specified and directed by Engr-in-Charge. (Rate quoted by the tenderer shall deemed to be included the cost of excavation and earth work).
Description all as per Srl item No 86 here in before but of size 120cm x 90cm x 105cm (internal dimension).
Material and labour for PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate for supporting of CI/GI pipes,header, repair of installations etc all as specified and directed by Engineer-in-Charge.
Taking down the existing sluice valve for repair/maintenance of size 80mm bore and replacement of unserviceable parts i.e spindle, seat, body/bonnet connection/wedge or disc/seat ring complete all as specified and directed by Engineer-in-charge.
Description all as per Srl item No 89 here in before but for iron pipe of 100mm bore
Description all as per Srl item No 89 here in before but for iron pipe of 150mm bore
Description all as per Srl item No 89 here in before but for iron pipe of 200mm bore
Supply and fixing in replacement of cast copper alloy bib Tap for iron pipe of 15 mm bore ISI marked all as specified and directed.
Description all as per Srl item No 93 here in before but 20 mm bore pipe
M & L for welding the existing leakage GI /MS/DI Pipe line any size laid in trenches / along with overhead in vertical position by using electric welding machine & welding electrode complete all as directed by Engr-in-charge. Note :Earth work shall be measured and paid separately under respective item of shedule
M/S PRAJAPATI ENGINEERS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .