Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.1 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹44.7 L+₹1.5 L (3.45%)Rejected-Finance | L2 | Rejected-Finance L2 | |
| 3 | L3₹46.9 L+₹3.7 L (8.55%)Rejected-Finance 411 STREET NO 4 PANCHVATI NAGAR BATHINDA 151001 | BATHINDA | PUNJAB | 151001 | L3 | Rejected-Finance L3 |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
9 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer
Garrison Engineer Chandimandir panchkula Haryana 134107
GE/CHM-94/2023-2024 WELCOME MAINT AND PETTY REPAIRS IN FAFA, SUNRISE AND JOSHI ENCLAVE UNDER AGE B/R I AT CHANDIMANDIR
2024_MES_636996_1
GE/CHM-94/2023-2024
Open Tender
Civil Works
Item Rate
180 days
Chandimandir
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
Garrison Engineer
₹98,000
Yes
12 Mar 2024
11 Jan 2024
13 Feb 2024
11 Jan 2024
9 Feb 2024
26 Jan 2024
Amount
Taking up or down steel tubing and connections including cleaning for refixing or removal to store of 15 mm bore complete all as directed by Engineer-in-charge.
Taking up or down steel tubing and connections including cleaning for refixing or removal to store of 20 mm bore complete all as directed by Engineer-in-charge.
15 mm bore Galvanized Steel tubes, medium grade including all fittings for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors ,complete all as specified and directed.
20 mm bore Galvanized Steel tubes, medium grade including all fittings for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings etc and cutting chases for concealed water tubing & making good, cutting not exc 10 cm girth, in brick walls complete all as specified and directed.
Polyethylene (PE-AL-PE) 16-20mm composite presssure crimp type internal sealing plastic metal composite fittings such as tees, reducers etc complete all as specified and directed.
Polyethylene (PE-AL-PE) 20-25mm composite presssure crimp type internal sealing plastic metal composite fittings such as tees, reducers etc complete all as specified and directed.
1000 Litres capacity Rotational moulded polythene water storage tanks (cylindrical vertical with closed top) triple layered hoisted and fixed in position including PTMT ball valve 20mm bore & tank nipple, etc, fixed as in repairs, complete all as specified and directed.
500 Litres capacity Rotational moulded polythene water storage tanks (cylindrical vertical with closed top) triple layered hoisted and fixed in position including PTMT ball valve 20mm bore & tank nipple, etc, fixed as in repairs, complete all as specified and directed.
Cleaning and removing all scale and dirt etc from overhead water storage tanks of capacity exc 250 but n.exc 500 litres and from mouths of circulating pipes etc complete, all as specified and directed.
Cleaning and removing all scale and dirt etc from overhead water storage tanks of capacity exc 500 but n.exc 1000 litres and from mouths of circulating pipes etc complete, all as specified and directed.
Supply and fix 15mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, fixed in repair complete all as specified and directed.
All as per serial item No 12 herein before but 20mm bore -ditto-
Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed for 20mm bore pipe (minimum weight 210 gms), fixed as in repairs, complete all as specified and directed.
Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
Brick work with sub class ‘B’ bricks of old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 complete all as specified & directed.
Supply only integral water proofing compound (ISI Marked) complete all as specified & directed.
Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. complete all as specified and directed.
15mm thick rendering in Cement and Sand mortar 1:4 mixed with WPC over roof slab and parapets finished even and fair without using extra cement all as specified and directed. Note : WPC will be measured and paid separately.
Rendering 15mm thick in Cement and Sand mortar 1:6 over brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
Two coats of oil bound distemper over a coat of primer including preparation of new surfaces (plastered / unplastered) and applying wall are putty, not less than 2mm thick on wall including prepartion of plastered surface complete all as specified and directed.
Preparation of new plastered surfaces of walls, applying two coats of cement base paint over a coat of primer, complete all as specified and directed.
One coat of white wash on old decorated wall surfaces including preparation of old surfaces complete all as specified and directed
One coat of white wash on old decorated ceiling surfaces including preparation of old surfaces complete all as specified and directed
Material and labour complete removal of existing treatment of any type / descriptin viz distemper, white wash etc from plastered / un plastered surface of wall, chajjas, facia, cantilivers, RCC etc with mechanical means / grinder completely and applying interior grade wall care putty (thickness vary from 1.5 to 2.5mm as required for desired smoothness and leveling of surfaces in two or more layers) and sand papering, making the surfaces even and smooth complete all as specified and directed.
Preparation of old decorated wall surfaces and applying one coat of oil bound distemper complete all as specified and directed.
Preparation of old decorated Ceiling surfaces and applying one coat of oil bound distemper complete all as specified and directed.
Preparation of old surfaces of walls and applying one coat of plastic(interior) emulsion paint, complete all as specified and directed
French polishing malamine finish with spray pump on surfaces of any description width or girth , over a coat of wood filler on old works including cleaning and preparing the surface,complete all as specified and directed.
One coat of synthetic enameled paint on steel and iron surfaces over 10 cm width or girth , including preparation of old surfaces , complete all as specified & directed.
Preparation of old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Two coats of synthetic enameled paint on steel and iron surfaces over 10 cm width or girth over a coat of red oxide including preparation of new surfaces complete all as specified & directed.
Preparing new or previously untreated wood and wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified & directed by Engineer-in-charge.
Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work at any height , complete all as specified and directed.
Reinforced cement concrete type B-1, 1:2:4 (nominal mix, using 20mm graded crushed stone aggregate) as in slabs supported on walls, beams etc, shelves, kitchen slabs and the like complete all as specified and directed Note : Reinforcement and form work shall be measured and paid separately
Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm complete all as specified and directed.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.
Flush pointing on brick tiles in paving laid flat in cement mortar 1:3 including racking out joints/ pointing in floor roof and removal of all grass root, small trees complete all as specified & directed.
Cutting down small trees / bushes from wall/roof/chajja of building including digging out the roots from brick work or any other structure portion of building including applying root killer chemical as per manufacturer instructions and making good the disturbed portion to match the existing surface complete all as specified and directed
3mm thick Atactic polypropylene polymer (APP) based polymeric membrane minimum weighing 3kg/sqm and reinforced with polyester non woven fabric (weight not less than 150 gms/sqm) laid over a coat of oil bound bitumen primer @0.40L/Sqm by same membrane manufacturer of density 0.87 to 0.89 kg/L at 25° C temperature and viscosity 70 to 160 CPS. The membrane shall be laid using butane torch and sealing all joints etc having 75mm side lap joint and 100m end lap joint after preparing the surface as per standard practice and as per manufacturer instructions and finished with applying one coat of bituminous aluminium paint @100gm/sqm on top of membrane, including dismantling of existing felt /treatment, complete all as specified & directed.
PVC (SWR) rain water pipe, 110mm bore, single socketed in any length with rubber ring joints, laid in trenches or in floors, fixed as in repairs complete all as specified and directed.
110 mm bore PVC (SWR) bends of any radius complete, fixed as in repair all as specified and directed.
Demolition of un-reinforced cement concrete, paver block, chequered, endura tiles any description and in any position not other wise specially provided for complete all as specified and directed.
Cement concrete type B-1, 1:2:4 using (20 mm graded crushed stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, parapets and railings upto 60 cm in height, copings, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including the use of forms or moulds with plain faces complete all as specified and directed.
50mm thick plain cement concrete type C-1 1:3:6 (Using 20mm graded crushed stone aggregates) as in plinth protection finished fair and even without using extra cement complete all as specified and directed.
Material and labour, plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation, sub base and mass concrete complete all as specified & directed.
Precast concrete interlocking paver block, with grey cement and pigment, design as approved, any shape and size conforming to IS 15658-2006 of 40 mm thickness, M-35 Grade, complete all as specified and directed
Precast concrete interlocking paver block, with grey cement and pigment, design as approved, any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade, complete all as specified and directed
Factory made chequered cement concrete tiles 250mm x 250mm x 22mm thick (with grey cement and pigments), set, jointed and pointed in neat cement slurry with grey cement with pigment to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed.
Sand filling under floors or in foundation, including watering and consolidation, all as specifed.
Taking down shutter of any description n.exc 1 Sqm each and removing from site complete all as specified and directed.
Taking down shutter of any description exc 1 Sqm but n.exc 2 Sqm each and removing from site complete all as specified and directed.
Taking down chowkats or frame n. exc. 1.5 sqm each with shutters (without taking off shutters from the frame) and removing from site complete all as specified and directed.
Taking down chowkats or frame exc. 1.5 sqm and n exc 4 Sqm with shutters (without taking off shutters from the frame) and removing from site complete all as specified and directed.
Factory made steel window box type with side hung shutters including box type hinges and one shop coat of red oxide primer, 125mm steel handle-02 Nos mild steel ISI marked tower bolt 125mm size (minimum 2 for each shutter) complete with glazing bars, dovetailed or welded fixed with and including MS flat of suitable size for fixing grills and guards bars etc fixed as in repair complete all as specified.
Factory made box type steel ventilators, openable with top hung shutters with box type hinges including one shop coat of red oxide primer, hinges, tower bolts 100 mm, steel handles and steel peg stay complete without glazing bars devetailed or welded, fixed as in repair complete all as specified and directed.
Factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS squared tube, fixing in opening at site all as specified & directed.
Factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed.
Butt hinges 100mm long, of extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 , all as directed.
Cutting holes in to brick wall built in cement mortar for inserting hold fast etc the embedded portion exceeding half brick but n.exc full brick and making good to the disturbed portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 using 20mm stone aggregate complete all as specified and directed.
2nd class hardwood (hollock) Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified & directed.
Factory made pressed steel frames of profile width 105mm x 60mm fabricated from 1.25 mm thick sheet, for doors with one or more rebate rebate including necessary fixing lugs, hinges, lock strike plate, etc, and back filled with PCC 1:3:6 type C-1 complete all as specified.
Factory made pressed steel frames of profile width 165mm x 60mm fabricated from 1.25 mm thick sheet, for doors with one or more rebate rebate including necessary fixing lugs, hinges, lock strike plate, etc, and back filled with PCC 1:3:6 type C-1 complete all as specified.
Glazed and gauged skelton shutter (Factory made) 35mm thick of second class hard wood open rebated & prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut & mitred beads for securing glass etc including priming coat. Size of members of shutters as specified in SSR Part I Section 8, clause 8.20 (a) including Kiln seasoned and chemically pressure treated, a shop coat of pink primer complete all as specified & directed.
Factory made second class hard wood 35mm thick Plain framed, panelled shutter with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, all as specified and directed.
Partly panelled and partly Skelton shutter (Factory made) 35mm thick of second class hard wood open rebated & prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut & mitred beads for securing glass etc including priming coat. Size of members of shutters as specified in SSR Part I Section 8, clause 8.20 (a) including Kiln seasoned and chemically pressure treated, complete all as specified & directed.
35mm thick flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides all as specified & directed by Engineer-in-charge.
100mm size, butt hinges, medium weight, cold rolled mild steel including necessary welding if required all as specified & directed by Engineer-in-charge.
150 mm aluminium handles cast type complete all as specified and directed.
150 mm size aluminium , barrel tower bolt of extruded section and fixed complete all as specified and directed.
200 mm size aluminium , barrel tower bolt of extruded section and fixed complete all as specified and directed.
300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed,complete all as specified and directed.
300mm mild steel ordinary rat tail rod pattern spring ,including roller and roller plate, fixed asin repair complete all as specified and directed.
Floor door stopper of aluminum alloy body and tongue, anodized with hard drawn steel spring, fixed in floor (140mm size), complete all as specified and directed.
Aluminium door seal brush, (having length 0.85 to 1.10 metre) fixed with steel screws to bottom rail of the door shutter, fixed in repairs,complete all as specified.
Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, fixed as in repair all complete as per architectural drawings and the directions of Engineer-in-Charge
Powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified
Hacking out old broken glass ( any thickness) size quality etc from any type of frame fixed with pin, beading or oil putty complete all as specified and directed.
4mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty (or beading) in square n.exc 0.5 Square Metre in each pane, complete all as specified and directed.
4mm thick figured glass pin head type ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square n.exc 0.5 Square Metre in each pane, complete all as specified and directed.
Galvanized MS wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm, complete all as specified and directed.
Galvanized MS wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed as in repairs, complete all as specified and directed.
20mm dia mild steel , PVC coated (coloured) as in drapery rod including brackets, end caps etc fixed as in repair, complete all as specified & directed.
20mm dia stainless steel , drapery rod including brackets, holder, endo brackets etc fixed as in repair, complete all as specified & directed.
Mortice lock, verticle type, 2 levers, size 100mm, aluminium body, fixed as in repair complete all as specified and directed
18/19mm thick block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work as in kitchen cabinet and cup board/ wardrobe fitted to chowkhats, with 6mm thick IInd class hard wood edging on exposed edges, fixed as in repair complete all as specified and directed.
0.90 mm thick decorative laminates type I, surface finish, colour and pattern as approved, pasted on block board with fevicol SR or any suitable adhesive complete all as specified and directed.
18-19mm thick pre laminated particle board (ISI Marked), interior grade, pre laminated one side with decorative choice lamination and other side balancing white lamination as in cup board, kitchen cabinets shutters etc, including 6mm thick teak wood lipping on exposed edges fixed with nails, fixed as in repair complete all as specified and directed .
18mm thick solid PVC door shutter made out of 18mm celuka printed and UV coated sheet which is cut according to the size of the cabinet or for kitchen drawer provided and the groove to be made on the one edge so that the overlapping could be done for double leaf door shutter including fixing is to be done by the 1.25" Mild steel screw to the frame with the channel in and including hinge. Handles . complete the work according directions of Engineer-in-Charge, fixed as in repair complete all as specified and directed.
Continuous (piano) hinges,mild steel, bright finish or electrogalvanised,width of flaps (when open) 30mm, fixed as in repair complete all as specified and dircted
Stainless steel earl bihari semihydraulic hinges of 50mm for cup board shutter complete all as specified and directed.
Stainless steel powder coated tray of various sizes fixed in drawer to keep the kitchen utensil, fixed as in repair complete all as specified and directed.
Stainless steel telescopy channel normal, fixed as in repair complete all as specified and directed.
150mm hasp and staple,aluminium anodised, wire type, including bolt to hinge plate and fixed with screws, fixed as in repair complete all as specified and directed.
40mm dia, cupboard knobs of brass fixed with nut, screw and washer of mild steel, bright finished, fixed as in repair complete all as specified and directed
Supply and fixing for magnetic catcher for cup board shutter, kitchen cabinets, ward robes complete all as specified.
Plate rack 0.65mm thick stainless steel sheet of size 900mm x 750mm x 250mm , with steel shelves and hanging arrangement for utensil, fixed as in repair complete all as specified and directed.
Welding in repairs, n.exc 2.5 cm in length, thickness of metals to be welded exc 6mm but n.exc 9mm complete all as specified & directed.
Dismantling of asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings and removal, complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified & directed by Engineer-in-charge.
Steel work in tubular trusses and tubular posts including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 with one shop coat of zinc chromate primer paint complete all as specified & directed by Engineer-in-charge.
Supply and fix pre-painted galvalume aluminium zinc coating GI based corrugated steel sheeting 0.50 mm thick any colour having tensile strength 550 Mpa as in roof coverings/cladding to wall, fixed with self tapping screws etc complete all as specified & directed by Engineer-in-charge.
Non skid ceramic tiles, jointless, first quality, coloured size 300mm x 300mm x 7mm thick, in floor in patches of matching with existing (area n.exc 3.00 Square metre) set and jointed with neat cement slurry and pointed in white cement with pigment to match the shade of tiles over and including 15mm thick screed in cement mortar (1:6), including dismantling of old tile complete all as specified and directed.
Non skid, first quality ceramic coloured tiles (joint free), 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick rendering in cement mortar 1:6, including dismantling of old tile complete all as specified and directed.
Glazed coloured ceramic tiles in vertical surface 300mm x 200mm x 7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 10mm thick rendering in cement mortar 1:4, including dismantling of old tile complete all as specified and directed.
Glazed coloured ceramic tiles in vertical surface 350 x 450 x 7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 10mm thick rendering in cement mortar 1:4 including dismantling of old tile complete all as specified and directed.
Vitrified ceramic tiles 8-10mm thick (square / rectangular) polished, area of each tiles n.exc 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over a 15mm thick screed bed in cement mortar 1:6 including dismantling of old tile complete all as specified and directed.
Granite slab 16-18mm thick (of any type & shade as approved), as on cooking platform, counter slab etc (length and width as ordered by GE in one piece) best quality machine cut and jointed with grey cement slurry and pointed in white cement mixed with pigment to match the shade of slab laid over and including 15mm thick screed bed in cement mortar 1:4 , nosing at edges, rounded edges , making holes for gas pipes, including dismantling of old tile complete all as specified and directed.
Filling of white or coloured cement to match the colour of tile in hungry joints of glazed tiles not exceeding 1.0 RM each complete all as specified and directed.
Bathroom mirror cabinet , size 500mm x 400mm fixed with and including chromium plated brass screws and PVC rawl plugs, fixed as in repair complete all as specified and directed.
PVC smart shelf of size 450mm above WHB with screws, fixed as in repair complete all as specified and directed.
Peg hook set of 6 of aluminum body, fixed as in repair complete all as specified and directed.
Toilet paper holder, cast copper alloy, chromium plated, fixedas in repairs, complete all as specified and directed.
Wash hand basin, vitreous china, flat back, white of size 550 x 400 mm with and including angle brackets fixed as in repair complete all as specified and directed.
Vitreous China wash basin, angle back, size 400x400mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets fixed as in repair complete all as specified and directed.
CP brass waste coupling / waste fitting with long shank, half thread, 32mm bore for kitchen sinks,wash hand basin, fixed as in repair complete all as specified and directed.
32mm dia PVC waste pipe with PTMT nut, fixed as in repair complete all as specified and directed.
Vitreous china counter top wash hand basin of size 440 x 470 x 130mm mounted on granite stone slab platform by cutting for coupling etc, fixed as in repair complete all as specified and directed.
Brass chromium plated bottle trap for wash basin with inlet and outlet screwed for pipe or connections including necessary packing, union and cap, having water seal of 25mm, suitable for 32mm bore pipe, fixed as in repair complete all as specified and directed.
Kitchen sink with drainage board made out of stainless steel sheet 1.0mm thick with plug, washers and CP waste coupling, overall size 915mm x 460mm x 203mm, with bowl of size 405mm x 354mm x 203mm incl fixing cantilever brackets, fixed as in repairs, complete all as specified and directed.
CP brass waste coupling / waste fitting with long shank, half thread, 40mm bore for kitchen sinks,wash hand basin, fixed as in repair complete all as specified and directed.
40mm dia PVC waste pipe with PTMT nut, fixed as in repair complete all as specified and directed.
Grating doom 125mm dia of PTMT (minimum weight 40gms) fixed in repairs complete all as specified and directed.
Soap dish of cast copper alloy, chromium plated (CP), fixed as in repair complete all as specified and directed.
Vitreous china, wash down water closet pan, superior white, Pedestal pattern WC with ‘P’ or ‘S’ trap, seat cover (excluding, flushing cistern and flush pipe), fixed as in repairs complete all as specified and directed.
Vitreous china squatting pan "orissa" pattern, size 580 x 440 mm white, with integral foot rest (excluding flushing cistern and flush pipe) including makes connection to trap & flushing pipe, set in cement concrete and making good to the floor, fixed as in repair complete all as specified & directed by Engineer-in-charge.
Vitreous China, semi-pedestal pattern (Anglo-Indian Type) including connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe, etc (excluding flushing cistern & flush pipe) fixed as in repairs complete all as specified & directed.
Vitreous china premium, 1st quality wash down water closet wall hung EWC white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) fixed as in repair complete in all respect all as specified.
Vitreous china wash down single piece EWC water closet pan alongwith cistern (Pedestal pattern) white (with all fitting) including connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe, etc fixed as in repairs complete all as specified & directed.
PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection with PTMT nuts and 32mm dia PVC long bend for squat pattern WC , set with concrete and making good to floor, fixed as in repair complete all as specified & directed.
Plastic water closet seat cover white closed pattern with flat bottom mild steel chromium plated or aluminium hinging device, fixed as in repair complete all as specified and directed.
Stop valve (concealed type), chromium plated, fancy type, screwed down, high pressure with crutch or butterfly handle, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed.
Angular stop valve, fancy type, cast copper alloy, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed.
Bib tap, long body, fancy type cast copper alloy, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed.
Bib tap standard of PTMT of any colour high pressure screwed for iron pipe and fixed (minimum weight 90gms ) for 15mm bore pipe, fixed as in repair complete all as specified and directed.
15mm bore brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed for wall mixture non telephonic, fixed as in repair complete all as specified and directed.
15mm bore brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed for telephonic wall mixture, fixed as in repair complete all as specified and directed.
15mm bore brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed for center hole WHB mixture, fixed as in repair complete all as specified and directed.
Chromium plated, fancy type shower rose with swivel joints 125mm dia with arm and fixing to steel pipe 15mm bore, fixed as in repairs, complete all as specified and directed
Brass chromium plated towel rack fixed in position with steel screws, fixed as in repairs , complete all as specified and directed. Make : Prayag Cat part BA-03 or euivalent in Jaquar/ Sona
Brass, chromium plated, tubular towel ring, fixed as in repair complete all as specified and directed.
Brass, chromium plated, tubular towel rail 20 mm dia. ‘D’ type, 60 cm long between flanges including brackets, fixed as in repair complete all as specified and directed.
Chromium plated hand jet (health faucet) for 15mm bore pipe with 100cm long flexible tube, including fixing of hook on wall, fixed in repairs, all as specified.
Flsuhing jet for pedestal pattern WC including flexible pipe and brass chromium plated nuts, fixed as in repair complete all as specified and directed.
PVC connection for hot/ cold water made of double layer nylon braided and fabric at a pressure of 6kg/sq cm at both ends, 450 mm long, heavy duty with CP brass adopters, washers, suitable for 15 mm bore pipe, fixed as in repair complete all as specified and as directed.
PVC connection 15mm size with PTMT nuts of length 450mm long as in repairs complete all as specified and directed.
Preparation of old decorated wall surfaces and applying two coats of oil bound distemper of approved tint oaver a coat of wall primer complete all as specified and directed.
sham enterprises
M/s Super Trading Corporation
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .