Development and beautification of CDAO campus Angul with drainage channel and compound wall

Removing and re-fitting of AC outdoor unit, CC TV Camera, Signboard etc. Complete

Dismantling brick or stone masonry in lime or cement mortar under 3m. height including stacking the useful materials for reuse and removing the debris within 50m Lead

Dismantling G.C.I or A.C sheet roofing after careful removal of bolts and nunts including stacking of the the matelials for reuse and removing the debris within 50m Lead etc. complete as per direction of Engg-in-Charge .

Dismantling and removing cement concrete including stacking the useful materials for reuse and removing the debris within 50m lead.

Dismantling and removing R.C.C. columns, beams, slab, staircase landing, lintels including stacking the useful materials for reuse and removing the debris within 50m lead.

Dismantling and removing doors, windows and ventilators including removal of frame, hinges, fastening and stacking the same for reuse and removing the debris within 50m lead.

Removing old lime or cement plaster from walls including raking out joints 12 mm deep and removing the debris within 50m lead. Ground Floor

First Floor

Dismantling and removing old tiled flooring including removing the base coarse and stacking the useful materials for reuse and removing the debris within 50m lead Ground Floor

First Floor

Excavation of foundation in hard soil within 50 m initial lead and 1.5 m initial lift including rough dressing and levelling as per the direction of engineer in charge

Supplying, Filling foundation and plinth with sand, well watered and rammed including cost and conveyance of materials.

C.C.(1:3:6) with 40 mm. size hard granite metal in F&P

C.C.(1:2:4) with 12 mm. size hard granite chips in F&P and above

R.C.C work M-20 grade using 20mm and 10mm size black hard crusher broken granite chips including hoisting lowering laying and centring, shuttering including cost, conveyance, royalties and cost of all materials and labour with T & P required for the work etc. complete in all respect as directed by the Engineer – in charge. Column base

Bed block

Column & beam

Roof slab

First Floor Bed block

Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification.Ground Floor

First Floor

2.5 cm thick grading concrete (1:2:2) on roof slab with 6 mm size hard granite chips on new work

Brick work with Flyash.Brick having crushing strength not less than 75 Kg/cm2 with dimensional tolerance ± 2 percent in cement mortar (1:6) in Foundation and Plinth..

Brick work with Fly Ash Brick having crushing strength not less than 75 Kg/cm2 with dimensional tolerance ± 8 percent in cement mortar (1:4) in Super Structure.Ground Floor

First Floor

12 mm thick cement plaster in c.m(1:6) over brick or stone masonry outside walls Ground Floor

First Floor

12 mm thick cement plaster in c.m (1:4) over RCC and Brick masonary work

Fixing Ceramic tiles in Floors, Treads on steps & landing on 25 mm thick bed of cement mortar [1:1] joined with neat cement slurry mixed with pigment to match the shade of the Tiles including rubbing and polishing complete in first floor

Fixing Ceramic tiles in Dado, Skirting and risers of steps on 12 mm thick cement mortar [1:3] joined with neat cement slurry mixed with pigment to match the shade of the Tiles including rubbing and polishing complete in first floor

Fixing of vitrified industrial floor tiles of premium grade having thickness 8 mm to 10 mm confirming to IS 4457 of size 300 mm x 300 mm in floors, treads or steps and landing of steps on 25 mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles per 1 sqm.

Supply and fixing of MCM Modified Clay Material - MCM R Series Brick (087089) - 222 x 63 mm of make, as per company standard dimension, pattern, color as specified, manufactured through unfired patented (Ref: US patent 8505840 B2 & European Patent 2157139) manufacturing technology, bonded together by using low heat temperature and having CE approval with the thermal conductivity of 0.0590 W/M.K — EN 12667 (2001), thermal resistance of 0.0568 M2 K/W— EN 12667 (2001) and Fire Insulation - Class A— ASTM E84- 15. The product should be patented from United States and Europe and with certifications by IGBC, Singapore Green Label and China Green Building material. MCM Materials should be fixed with suitable Cement/ Polymer/Epoxy based adhesive as per adhesive chart and substrate and per directions of Engineer in-charge. Grouting should be done using filling and pointing method as per installation drawing provided, and colour of the grout should be as per the architect’s specification depending on the substrate and as per the direction of Engineer in-charge. Ground Floor

First Floor

Priming one coat to wall surface with water bound cement primer including cost, conveyance of all materials, labour and T&P etc. complete

First Floor

Finishing exterior walls with weather coat of approved shade two coats on new work to give an even shade including cost of paint complete in all respect.

First Floor

Cost of FRP panel type (single shutter) frame doors including transportation charges. fitting . fixing etc.complete

Supply, fitting and fixing of MS grill, Door & Window shutters with frames and ventilators etc.

Primimg one coat with any approved red oxide primer over iron works including cost of primer.

Painting two coats with enamel paint over a coat of primer on new iron shutters etc.

First Floor

Supplying and laying of 80 mm thick heavy duty factory made pre-cast interlocking cement concrete paver block of M-30 grade made by block making machine with strong vibratory compaction method of required strength of approved design and shape, laid in required colour and pattern over 50 mm thick compacted bed of coarse sand to required level, filling the joints with fine sand etc. complete in all respect.

Supplying and fixing of Pre cast kerb stone of size 300mm x 300mm x 150mm of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction fixed in required pattern etc. complete in all respect

Supply, fitting and fixing of steel letters in the gate etc., complete in all respects.

Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly leveling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water .

Rough dressing the trenched ground including breaking clods.

Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation.

Supplying and stacking of good earth at site including royalty and carriage upto 5 km complete

Supplying and stacking sludge at site including royalty and carriage upto 5 km complete

Fine dressing of the ground.

Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately)

Provision supply, fitting and fixing of pop-up sprinkler with all accessories complete for the lawn.

Provision for supplying & fitting of bypass system from borewell supply point with all cost of labour, conveyance and materials including PVC pipe of appropriate size, one way valve and other fitting accessories etc.

Provision for supplying, fitting, fixing decorative light post including all accessories.

Providing & Recessed wiring to submain of following sqmm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required.(Make of wire - Finolex / L&T / Anchor / Havels / V Guard) complete.2 x 2.5 sqmm + 1 x 1.5 sqmm in 20 mm dia

Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using SS square pipe as per approved design and specification, buffing, polishing etc. complete in all respect.

Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V piano type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge.(Make of wire - Finolex / Anchor / Havells / legrand & switch - Roma / Legrand / Cona )

Supply, Installation, Testing and Commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required complete. (Make - Usha / Bajaj / Havells / Crompton)

Installation, testing and commissioning of exhaust fan 250 mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage complete, connection, etc as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC.

Supply and fitting of 50 watt LED street light with all fitting & accessories (Usha / Bajaj / Philips / Crompton / Havells etc.)

Supplying, fitting and fixing of 18 watt Circular / Square recessed LED fittings (Usha / Bajaj / Philips / Crompton / Havells etc.)

Laying in trenches PVC pipes conforming to IS:4985-2000 and specials of the 110 mm OD P.V.C. SWR S/S Pipe (ISI type-A) including jointing with supply of approved solvent cement by non-heat application method including testing as per specification complete.

Providing and fixing on wall face 110 mm OD P.V.C. SWR S/S Pipe (ISI type-A) soil, waste and rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes

Providing and fixing on wall face PVC moulded fittings / accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion 110mm dia PV SWR coupler

110mm PVC SWR door bend 87.5'

110 x 110 x 110mm dia PVC SWR Tee

110mm PVC SWR Nohani trap

Providing and fixing to wall or ceiling and floor pvc pipes class conforming to ASTM-D- 1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification complete. 15mm dia PVC pipe in ground floor

25mm dia PVC pipe in ground floor

Fixing 600mm x 450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with chromium plated brass screws and washers complete as per specification.

Suppying and fixing Porcelain 20"x 16"(500x400) Wash Hand Basin with approved make & model with CI brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc including fixing Chromium Plated waste pipe of 32 mm nominal diameter, Chromium Plated Pillar taps & Chromium Plated Angle Valve of 15 mm dia nominal bore with approved make & model, 15 mm dia PVC inlet connection pipe as per P.H specification including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work complete as per the direction for the EIC.

Fixing Wash Down Water Closet (European type W.C pan) with integral or trap conforming to IS 2556 : Part 8-2004, to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification.

Providing and fixing 10 litre capacity - White P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete

Fixing Soap disc with Chromium Plated fixed to wooden plugs with Chromium Plated brass screws as per specification.

Fixing standard sized Chromium Plated brass Towel Rail [600x20 mm] complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws, complete as per specification

Supplying, fitting and fixing of glass shelf with brackets and all accessories.

Supplying and fitting 15mm dia C.P. long body bib cock with supply of all jointing materials as per P.H specification including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work complete as per the direction for the EIC.

Supplying and fitting 15mm dia C.P. short body bib cock with supply of all jointing materials as per P.H specification including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work complete as per the direction for the EIC.