Tender ID

Cancelled

Works

Civil Works

Construction work of CC and drain in chainage 3.000 to 3.080 of Deundha-Itwa link road

Chief Engineer Chitrakoot Dhaam (Banda) Zone PWD Banda

EE CD-1 PWD Chitrakoot | Chitrakoot, Uttar Pradesh

Amount: ₹4.2 LCloses: 27 Mar 2026Closed

Timeline

Published21 Mar 2026
Closed27 Mar 2026
Cancelled6 Apr 2026

Cancellation Details

Cancellation of Tender

Cancel TenderCancel TenderReason: Due to admistrative reasons/issuesDocument: cancelled_1.pdf

Published 6 Apr 2026

Tender Value

₹4.2 L

EMD Value

₹42,000

Closing Date

27 Mar 2026, 12:00 pmClosed

Tender Inviting Organisation

Name

EE CD-1 PWD Chitrakoot

Address

EE CD-1 PWD Chitrakoot

Work Description

Construction work of CC and drain in chainage 3.000 to 3.080 of Deundha-Itwa link road

Tender Information

Tender ID

2026_CEBAN_1128827_2

Reference Number

368/A-16 Dt. 20-03-2026

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Percentage

Period of Work

60 days

Location

EE CD-1 PWD Chitrakoot

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

2 documents required · 2 mandatory

Fee/PreQual/Technical

RequiredNIT (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹770

EMD Fee Amount

₹42,000

Pre-Bid Meeting

Meeting Place

EE CD-1 PWD Chitrakoot

Important Dates

Last Activity

6 Apr 2026

Published

21 Mar 2026

Bid Opening

27 Mar 2026

Download Starts

21 Mar 2026

Download Ends

27 Mar 2026

Submission Starts

21 Mar 2026

Pre-Bid Meeting

23 Mar 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (0 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.
2Construciton of un-reinforced, plain joint at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base with 43 grade cement or any other type as per Clause 1501.2.3 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25mm mixed in a concrete mixerof not less than 0.20cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the form work as per drawing. spreading the concrete with shovels, rakes, compacting using needle, screed and plate vibrators and finished in continous operation including provision of contraction and expansion, construction joints, applying joint filler board near approcehes to bridges/culvert and construction joints, admixture
3Construction of Embankment with Material Obtained from Borrow Pits (Carted earth) Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical specification clause 301.5
4Excavation in foundation in Black Cotton soil including lift up to 1.50 m and lead up to 30 m including filling watering and ramming of excavated earth into the trenches and removal and disposal of surplus earth as directed by the Engineer-in-charge as per S.I. No. 251.
5Cement concrete with 4cm (1/2'') gauge approved stone ballast, approved coarse sand. cement in the proportion 8 : 4 : 1 including supply of all materials,labour and tools and plants etc. required for proper completion of the work.
6Cement concrete with 2cm (1/2'') gauge approved stone ballast, approved coarse sand. cement in the proportion 4 : 2 : 1 including supply of all materials,labour and tools and plants etc. required for proper completion of the work.
7Brick work in 1:3 cement and coarse sand mortar.
812mm thick plaster in 1:4 cement coarse sand mortar

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.02 MB

Cancellation Documents

cancelled_1.pdf

pdf • 0.22 MB

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 1.88 MB

Tendernotice_2.pdf

PDF • 1.56 MB

Work Item Documents

BOQ_2105433.xls

BOQ • 0.35 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.
2Construciton of un-reinforced, plain joint at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base with 43 grade cement or any other type as per Clause 1501.2.3 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25mm mixed in a concrete mixerof not less than 0.20cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the form work as per drawing. spreading the concrete with shovels, rakes, compacting using needle, screed and plate vibrators and finished in continous operation including provision of contraction and expansion, construction joints, applying joint filler board near approcehes to bridges/culvert and construction joints, admixture
3Construction of Embankment with Material Obtained from Borrow Pits (Carted earth) Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical specification clause 301.5
4Excavation in foundation in Black Cotton soil including lift up to 1.50 m and lead up to 30 m including filling watering and ramming of excavated earth into the trenches and removal and disposal of surplus earth as directed by the Engineer-in-charge as per S.I. No. 251.
5Cement concrete with 4cm (1/2'') gauge approved stone ballast, approved coarse sand. cement in the proportion 8 : 4 : 1 including supply of all materials,labour and tools and plants etc. required for proper completion of the work.
6Cement concrete with 2cm (1/2'') gauge approved stone ballast, approved coarse sand. cement in the proportion 4 : 2 : 1 including supply of all materials,labour and tools and plants etc. required for proper completion of the work.
7Brick work in 1:3 cement and coarse sand mortar.
812mm thick plaster in 1:4 cement coarse sand mortar

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.

2Construciton of un-reinforced, plain joint at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base with 43 grade cement or any other type as per Clause 1501.2.3 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25mm mixed in a concrete mixerof not less than 0.20cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the form work as per drawing. spreading the concrete with shovels, rakes, compacting using needle, screed and plate vibrators and finished in continous operation including provision of contraction and expansion, construction joints, applying joint filler board near approcehes to bridges/culvert and construction joints, admixture

3Construction of Embankment with Material Obtained from Borrow Pits (Carted earth) Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical specification clause 301.5

4Excavation in foundation in Black Cotton soil including lift up to 1.50 m and lead up to 30 m including filling watering and ramming of excavated earth into the trenches and removal and disposal of surplus earth as directed by the Engineer-in-charge as per S.I. No. 251.

5Cement concrete with 4cm (1/2'') gauge approved stone ballast, approved coarse sand. cement in the proportion 8 : 4 : 1 including supply of all materials,labour and tools and plants etc. required for proper completion of the work.

6Cement concrete with 2cm (1/2'') gauge approved stone ballast, approved coarse sand. cement in the proportion 4 : 2 : 1 including supply of all materials,labour and tools and plants etc. required for proper completion of the work.

7Brick work in 1:3 cement and coarse sand mortar.

812mm thick plaster in 1:4 cement coarse sand mortar