Repair and Renovation of Centralized facilities in the Department of Life Long Learning in connection with NAAC Accreditation of Jammu University

Amount

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty 1 mm (avg.) thickness,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Distempering (one coat) with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including to achieve even shade and colour.applying additional coats wherever required

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work (Make Asian/Nerolac).

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make in all colours & shades (Kajaria/Asian/Somany) laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete

Providing and fixing 1st quality ceramic glazed wall tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make (Kajaria/Asian/Somany) in all colours, shades size as approved by Engineer-in-Charge in skirting, risers of steps over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 sand) and jointing with grey cement slurry @ 3.3kg per sqm including coarse pointing in white cement mixed with pigment of matching shade complete.

Providing and laying vitrified floor tiles 600mm x 600mm size (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) approved make (Kajaria/RAK/Asian), in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete

Providing and fixing cupboard shutters 25mm thick, with pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked exterior grade (Grade I Type II) having one side decorative lamination and other side a balancing lamination including second class teak wood lipping of 25mm widex12mm thick with necessary screws and bright finished stainless steel piano hinges complete as per directions of Engineer- in-charge

Providing and fixing white vitreous china water closet squatting pan (Indian type) Orissa pattern W.C. pan of size 580x440 mm (Make Cera/Parryware/Hindware)

Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively.

P&F CP Prysmatic Urinal Spreader with CP Rod (Jaquar Make)

Providing and fixing PTMT angle stop cock 15mm nominal bore, weighing not less than 85gms.

Providing and fixing PTMT bib cock of approved quality & colour.15 mm nominal bore, 90 mm long, weighing not less than 93 gms

Providing and fixing PTMT pillar cock of approved quality and colour.15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms.

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White

M/S MOHD ASHRAF SHAN

Mamta Enterprises