CONSTRUCTION OF OUTER PERIMETER BOUNDARY WALL OF SUB.-JAIL UDAKISHUNGUNJ IN DISTRICT MADHEPURA.

Earth work in excavation in foundation trenches or drains (not exceeding 1.5m in width or 10Sqm on plan) including dressing of sides and ramming of bottoms,lift upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed,within a lead of 50m.

Supplying and filling in plinth with local sand and under floors including watering, ramming consolidating and dressing complete.

Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes royalty,all complete as per building specifications and direction of E/I.

Providing and laying in position specified drade of Plain cement concrete excluding the cost of centring,shuttering ,finishing all work upto plinth level 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size )

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement,Concrete of M-25 grade with minimum cement content of 330 kg/cum

All work above Plinth level upto floor V Level. Concrete of M-25 grade with minimum cement content of 330 kg/cum

Brick work of with Fly Ash Brick in Super structure in Cm 1:6 (1cement: 6 coarse sand) etc. all complete job as per direction of E/I.

Filling available excavated earth (excluding rock) in trenches,plinth, sides of foundations etc. in layers not exceeding 20 Cm in depth: consolidating each deposited layer by ramming and watering lead.

Finishing with 15mm Cement plaster on rough side of single or half brick wall of mix 1:6 (1Cement: 6 Coarse sand) etc. all complete job as per direction of E/I.

Finishing with 15 mm cement plaster 1:3 (1 cement: 3 coarse sand ) finished with a floating coat of neat cement on the rough side of single or half brick wall.

Centring and shuttering including strutting, propping etc. and removal of form for foundation, footing, bases of columns etc. for concrete

Centring and shuttering including strutting, propping etc. and removal of form for columns, pillers, piers, Abutment, post and struts.

Centring and shuttering including strutting, propping etc. and removal of form for Lintels,beams,plinth bams,griders,bressumers and contilevers.

Providing and fixing M.S. grills of required pattern in frames of windowsetc. with m.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding

Applying priming coat With ready mixed zinc chromate yellow primer of approved brand and manufacture on steel galvanized iron/steel works

Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: New steel work (two or more coats)

Applying one coat of cement primer of approved brand and manufacture on wall surface: Cement primer

Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade over New work (three or more coats)

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

Thermo-mechanically Treated bars TMTC-500-8mm dia.

Thermo-mechanically Treated bars TMTC-500-10mm dia.

Thermo-mechanically Treated bars TMTC-500-12mm dia.

Thermo-mechanically Treated bars TMTC-500-16mm dia.

Providing and fixing M.S. angle 50x50x5 mm to act as nosing with tugs of M.S. flat 10x5 mm 10 cm long forked at end 60 cm apart (minimum 3 lugs to be provided) including necessary welding and applying a priming coat of approved primer on exposed surfaces etc. complete

Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron,all complete as per direction of Engineer-in charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165kg/ sq mm with tape (0.52 mm thick) and weight 43.478gm/metre (cost of M.S. angle, C.C.

Drilling 6mm Dia. In M.S. angle iron for fixing of staples etc. as per building specification and direction of E/l.

Labour for cutting of M.S. angle iron post to required length, one end splitted as fish tailed in a length of 150mm complete as per building specification and direction of E/l.

Providing Unskilled labour for Carrieng of raw materials from jail gate to work site and clear site