GE 874/EWS-30/2024-25

Amount

Surface dressing n. exc 15 cm deep in soft/loose soil complete all as specified and directed.

Excavation in trenches n. exc 1.5m in depth and 1.5m in width and getting out in hard/'dense soil complete all as specified and directed.

All as per item No 2 here in before but exc 1.5 m deep and n exc 3m deep.

M&L for providing cement concrete 1:4:8 type D2 (Using 40mm graded stone aggregate) in foundation, mass concrete and fillings complete all as specified and directed.

M&L for use and waste of form work to side of concrete in foundations, footing base, base of columns, side and soffits of plinth beam and similar work complete all as specified and directed.

M&L for use and waste of form work to side of sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, and similar work complete all as specified and directed.

M&L for use and waste of form work side of columns and similar work complete all as specified and directed.

M&L for providing reinforcement cement concrete M-25 (Design Mix) as in footing, foundation, beams, plinth beams, base for columns and mass concrete etc complete all as specified and directed.

M&L for providing reinforcement cement concrete M-25 (Design Mix) as in Beams, cantilevers, bressummers, lintels over 1.5m span concrete etc complete all as specified and directed.

M&L for providing reinforcement cement concrete M-25 (Design Mix) as in columns and pillars etc complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cracking bending and binding with mild steel (anneal) wire not less than 0.90mm dia complete all as specified and directed.

M&L for mild steel TMT bars 5 to 10mm dia a as in stirrups, spacers and binders complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick thick walls in built in CM 1:4 complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces with CM 1:4 mixed with WPC, finished even and smooth without using extra cement complete all as specified and directed. Note :- (WPC shall be measured and paid separately)

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces with CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new plastered surfaces of wall and applying three coats of white wash/colour wash complete all as specified and as directed.

Supply only liquid water proofing compound complete all as specified and as directed.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment etc complete all as specified and directed.

S&F mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.

S&F mild Steel Work as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

M&L for mild steel screw bolt diameter of shank 11 to 15mm (machine made) with hexagonal head at one end screwed the other or screwed both ends, each screw end fitted with washers and one hexagonal nut exc 5cm but n.exc 10cm complete all as specified and as directed.

M&L for mild steel hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; complete all as specified and as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws complete all as specified and as directed.

M&L for sand filling under floor or in foundation including watering and consolidation etc complete all as specified and as directed.

M&L for hardcore of gauge n. exc. 63mm deposited, spread and levelled in layers n. exc 15cm thick watered and rammed to a true surface for plinth protection/path complete all as specified and as directed.

M&L for 100mm thick PCC (1:4:8) type D-2 (40mm graded aggregate) for floor sub base complete all as specified and directed.

M&L providing 25mm thick cement concrete 1:2:4 type B-1 (Using 20mm graded stone aggregate), as in sub base in floor/paving etc complete all as specified and directed.

M&L for Non-skid ceramic coloured tiles 7-8 mm thick, area exc 0.11 sqm but n. exc 0.18 sqm of each tile in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 15mm thick screed bed in CM 1:4 over 25mm thick PCC 1:2:4 type B-0 (using 12.50mm graded crushed stone aggregate) complete all as specified and as directed.

M&L for coloured glazed ceramic tiles as in skirting/ dado (350x250 or 450x350) x 7mm thick, set and jointed in neat cement slurry and pointed in coloured cement to match colour of the tile over backing coat/screed bed 10mm thick in CM (1:4) on fair faces of brick/stone wall surfaces for laying dado/skirting complete all as specified and directed.

M&L for mosaic blue coloured tiles, 4mm thick, (50 mmx50 mm) of each tile in floor/wall etc set & jointed in neat cement slurry and pointed in blue or coloured cement to match the colour of tile over and including 10mm thick screed bed in CM 1:4 on wall/floor complete all as specified and directed.

M&L for 75mm thick plain cement concrete (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in sub base or floor complete all as specified and as directed.

M&L for chequered cement concrete tiles of size 200x200 and 25mm thick with grey cement and no pigment, set jointed & pointed in neat cement slurry in floors over 15 mm thick screed bed of 1:4 cement mortar complete all as specified and directed.

M&L for 75 mm thick cement concrete type C-2, 1:3:6 (40 mm graded aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection complete all as specified and directed.

S&F factory made solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & Bottom rails. MS frames shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and directed.

S&F 100 mm long butt hinges extruded aluminium anodised complete all as specified and directed.

S&F 75 mm size mild steel butt hinges medium weight complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 100 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F aluminium anodised alloy handles fabricated type 150mm size of handle complete all as specified and directed.

S&F 100 mm long aluminium handles cast type anodised complete all as specified and directed.

S&F Vitreous China Wash down water closet pan (Pedestal pattern), white including plastic water closet seat and cover closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device & including P or S trap and connection to trap and to the flushing system anti syphonage pipe etc (excluding flushing cistern and flush pipe) complete all as specified and as directed.

S&F vitreous china squatting pan 'Orissa' pattern size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing system anti syphonage pipe etc complete all as specified and as directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25-metre-long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S & F Vitreous China Urinal, Half stall type, white with grating and union for discharge pipe including providing and fixing plugs with and including 60mm long brass screws, pointing around urinal back in cement with PVC 32mm dia waste pipe & waste coupling including spreader complete all as specified and directed.

S&F PVC valveless, syphonic action type, low level PVC flushing cistern 10 ltr capacity white with flush pipe & all fitting complete all as specified and directed.

Supply & Fixing Vitreous China Ware Wash hand basin white flat back size 550mmx400mm including pedestal, cutting for and pinning ends of brackets or erecting stand including necessary PVC outlet pipe, CP coupling 32mm dia complete all as specified and directed.

S&F PVC connection 15 mm length 450mm complete all as specified and directed.

S&F bib taps cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule of 15mm bore complete all as specified and directed.

S&F pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S & F 15mm bore Stop/Angle valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F 1000 Ltr capacity PVC water storage tank (cylindrical vertical with closed top) and fixed in position complete all as specified and directed.

S&F PTMT ball valve high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule 20mm dia complete all as specified and directed.

S&F 20mm bore gun metal globe or gate valve with iron wheel head, screwed both ends complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors / fixed to walls complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed, in any length fixed to walls / floors or in trenches complete all as specified and directed.

S&F PVC (SWR) bends any radius, 110mm bore, fitted with oval access door complete all as specified and directed.

S & F bend suitable for 110mm dia PVC (SWR) pipe complete all as specified and as directed

S&F PVC (SWR) bends any radius, 75mm bore, fitted with oval access door complete all as specified and directed.

S&F PVC (SWR) reducers any radius 110mm bore complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction, single (single T) equal or unequal with door access complete all as specified and directed.

S&F PVC (SWR) vent cowl 75mm dia complete all as specified and directed.

M&L for PVC(SWR) floor trap, 75mm dia outlet, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F Aluminium powder coated (thickness of powder coating not less than 50 micron) as in ventilators half fixed with 4mm glass and half louvers with clips of 4mm glass 100mm wide type of frame size 104mmX45.60mm thickness 3 mm, weight per kg /mtr 1.705 and one mosquito proof shutter frame size 44.50mmX25mm thickness1.40mm and weight kg/mtr 0.560.single leaf cut to size, jointed galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm together with cadmium plated steel screws including rubber packing aluminium beading or gasket for aluminium section for fixing of 4 mm pin headed glass sheet and wire cloth necessary fittings complete screws plugs complete all as directed. Note: Aluminium frame, shutter, glass, wire cloth, louvered and accessories are included in above description.

S&F 20mm thick 2nd class softwood boarding, planed one side, with butt joints and fixed with nails in facia eaves boarding complete all as specified and directed.

S&F Granite (of any type) work (table rubbed and polished) size of 20mm thick and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding off edges including cutting hole for wash basin fixing as per required size completed as specified and directed.

S&F steel water tubing of nominal bore dia 15mm medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F steel water tubing of nominal bore dia 20mm medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

M&L for precast cement concrete Type B-1,1:2:4 (using 20 mm graded stone aggregate) set in cement mortar 1:4 as in manhole covers complete all as specified and directed.

M&L for returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed.

M&L for removing excavated material (soil) n. exc 50m and deposited where directed at a level n exc. 1.5m above the starting point complete all as specified and directed.

M&L for machine cut kota stone flooring 20-25mm thick over 20mm thick cement screed (1: 6) base and jointed with grey cement slurry mixed with pigment match the shade of the slab including rubbing and polishing complete all as specified and directed.

S&F Pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and as directed.

M&L for providing plain cement concrete 1:3:6 Type C-0 (using 12.5mm graded stone aggregate) as in filling hollow of pressed steel frame complete all as specified and directed.

S & F 35 mm thick second-class soft wood, plain framed, panelled shutters (any number of panel) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density wood particle board with commercial face veneers. complete all as specified and directed.

S&F 300mm long aluminium alloy, anodised sliding door bolt, with hasp and staple (bolt type) cast or extruded section and fixing bolts of extruded section complete all as specified and directed.

S& F floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel pin fixed to door, overall length 140 mm complete all as specified and directed.

M&L for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

M&L for ventilators, fixed type, with glazing bars complete all as specified and as directed.

S & F mild steel framed work such as grills, gratings etc with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar works confirming to Fe-290. Gde-E-165 complete all as specified and directed.

M&L for 4.0 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exceeding 0.5 Sqm in each panes complete all as specified and directed.

M&L preparation of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide/zinc chrome primer complete all as specified and as directed.

M&L for preparation of newly un treated surfaces and applying two coat of synthetic enamel paint over a coat of pink primer on wooden surfaces of any description not other wise described over 10 cm width or grith etc complete all as specified and as directed.

M&L for cutting, threading and joining of existing GI pipe line upto 80 mm dia and inserting suitable tee for taking branch connection all as specified and directed.

Supply and laid in trenches pipe galvanized 20 mm dia medium grade complete including fitting such as bends, elbows, tees, short pieces, connectors, back nuts, caps, plugs and unions etc complete all as specified and directed.

Supply and laid in trenches pipe galvanized 25 mm dia medium grade complete including fitting such as bends, elbows, tees, short pieces, connectors, back nuts, caps, plugs and unions etc complete all as specified and directed.

Supply and laid in trenches pipe galvanized 40 mm dia medium grade complete including fitting such as bends, elbows, tees, short pieces, connectors, back nuts, caps, plugs and unions etc complete all as specified and directed.

Supply and fixing 20 mm gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe suitable for 20 mm dia pipe complete all as specified and directed.

Supply and fixing 25 mm gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe suitable for 25 mm dia pipe complete all as specified and directed.

Supply and fixing 15mm Ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed all as specified and directed.

M&L for Lagging to pipes 20mm bore used in internal water supply or plumbing all round with 25mm thick bonded mineral wool preformed 'SNAP ON' pipe sections of density 144Kg/Cum conforming to IS-9842 provided with chicken mesh wire netting 25 gauge, 20mm mesh and covered with 0.01mm aluminium foil, complete all as specified and directed.

Supply, Laying , jointing and testing LT underground cable, heavy duty, 1100 Volts, XLPE insulated and sheathed, armoured with multi-stranded aluminium conductor cable 10 sqmm 2.0 core, laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/drains/culverts duly encased in galvanised steel pipe of suitable sizes including cable gland of suitable sizes and aluminium lugs for connection for complete all as specified and directed.

Supply and laying dry river sand for cable cushioning in trenches to required width at bottom and top of cable including spreading levelling watering and consolidation complete all as specified and directed. Note:-Punned thickness only shall be measured and paid.

Supply and laying old size brick covering with width equal to length of brick as the mechanical protection to cable with well burnt sub class 'B' laid in trenches flat complete all as specified and directed.

Supplying and fixing, light grade , Galvanised mild steel pipe / tubing, 50 mm bore complete with all fittings, laid under roads, drain, paths, fixed to poles/ walls with suitable mild steel clamps , bolts , nuts and washers complete all as specified and directed as for cable protection complete all as specified and directed.(Note:- Excavation & earth work shall be measured and paid for separately under appropriate item of this schedule ):-

M&L for point wiring with 1.5 Sqmm copper conductor FRLSH (Stranded) PVC insulated ISI Marked unsheathed cable in and including concealed PVC conduits, medium grade, ISI marked not less than 20 mm dia with all fittings/ accessories and also including PVC insulated ISI marked unsheathed 1.5 Sqmm copper multistranded conductor FRLSH as earth wire connected to common earth dolly and including sunk cast iron/pressed steel terminal boxes, junction boxes, other boxes made from 1.6 mm thick sheet of suitable sizes for mounting of switches, sockets, fan regulators, light fittings etc. covered with 3mm thick plastic laminated sheet complete all as specified and directed for the following :- Note:- Proper colour coding shall be adopted for phase, neutral, earth and halves.

All as per item No 101 herein before but wiring with 1.5 sqmm copper wire (FRLSH) and 1.5 sqmm earth wire for switch socket combination 3 pin 5 amps on independent board.

All as per item No 101 herein before but wiring with 1.5 sqmm copper wire (FRLSH) and 1.5 sqmm earth wire for socket outlet 3 pin 5 amp on same board.

All as per item No 101 herein before but wiring with 2.5 sqmm copper wire ( FRLSH) and 1.5 sqmm earth wire for switch socket combination 6 pin 15 amps on independent board.

S&F switch piano flush button single pole, one way 5 amps complete all as specified and directed.

S & F switch socket combination 5 pin 16A, flush type complete all as specified and directed.

S & F switch socket combination 3 pin 5A, flush type complete all as specified and directed.

S&F sheet metal enclosure for DBs (Double door type) when MCBs to be used single pole and neutral 8 way including blanking plate as required with 200 amps rated busbar 240V fixed sunk/flush to the wall or niche complete all as specified and directed.

S&F MCB's single pole 240 volts 6 to 32Amps 10 KA 'C’ series, complete all as specified and directed.

S & F of MCB SPN, 240volt, 40 to 63 Amp capacity, 10 KA, 'C' curve complete all as specified and as directed.

S&F LED, 20 Watts, 4 ft, fittings complete with all accessories for mounting light fittings complete with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high output diffuser 2 feet, 10-watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix ceiling rose with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body complete all as specified and directed.

M & L for Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings complete all as specified and directed.

Supply and fix LED Bulb 9 Watt all as complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60x60cmx6.3 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge lead of the plate not less than 1.5 mtr below normal ground level, connected galvanised earth lead wire 4.0mm dia by means of bolts, nuts check nuts and washers of galvanised iron or steel all as shown in Electrical plate No 3 connected to earthing test point including testing on completion complete all as specified and directed.

S&F 09W/10W Bulk head luminaries including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230v , 50HZ , RPM 1200, Copper winding of sweep 300mm, with 2 years warranty complete all as specified and directed..

M&L for wiring for circuit/submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed as required in PVC casing caping of size 2x2.5 sq. mm + 1x1.5 sq. mm earth wire complete all as specified and directed.

Supply and Fixing 1100 Volts grade heavy duty cable PVC insulated multistranded aluminium conductor served with PVC tape and overall PVC sheathed in services connections suspended by insulating hanger not more than 1 mtr apart including 4mm dia GI suspension wire one twin core cable flat or circular of size16 Sqmm 2 core including service bracket complete all as specified and directed.

M/s Sajad Hussain Wani

M/S BEE AAY CONSTRUCTIONS

patriotic builders

Bidder Name

M/S AB AHAD RATHER

patriotic builders

M/s Sajad Hussain Wani

M/S BEE AAY CONSTRUCTIONS