SPECIAL REPAIR TO BLDG NO. P-243 (MD ACCN OF MAJ TO LT. COL) AT CME, PUNE

Amount

Dismantling of single layer Mangalore Pattern roof tile laid dry complete all as specified and directed

All as per item No.1 above, but bedded in lime or cement mortar complete all, as specified and directed.

Dismantling battens for tiles, shingles etc, of any size including tilting fillets spacing exc. 15cm complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position

S&F Framed work such as roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe-410-W (Gde E-250) Quality A complete all as specified and directed.,

S&F rolled sections as in main and cross beams, hips and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates etc Fe-410-W (Gde E-250) Quality A complete all as specified and directed.

M & F for preparation of new or previously untreated surfaces of iron of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed

S & F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc. complete all as specified and directed.

S & F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in ridges, hips, valley, gutters etc. complete all as specified and directed.

M &L For false ceiling with 12mm thick designer 'E' board fixed on GI grid work with powder coated finish on exposed surface of size 0.60 x 0.60 m consisting of GI angle supported on wall of size 24 mm x 28 mm x 0.7 mm main tee of size 24 mm x 38 mm x 0.7 mm cross tee of size 24 mm x 28 mm x 0.7 mm using purpose made members interlocking to made to shape at 1200 mm c/c fixed with 3mm dia. GI wire suspender and making holes etc. all as directed including two coats of white wash on ceiling after preparation of surfaces and as per manufacturers instruction make of grid work : Armstrong/ swastik/ Techno Grid and 'E' board Gypsum or equivalent approved. including taking down old ceiling etc complete as specified and directed.

Dismantling water tanks and removing to store capacity exc. 500 & n.exc. 1000 ltrs complete all as specified and directed.

S&F For 1000 ltr. Capacity rotational moulded polyethylene water storage tanks cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

M&L 20mm bore dia ball brass valves, high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule complete all as specified and directed.

M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 etc. including dismantling old tiles etc. complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premisescomplete all as specified and directed.

Demolition of cement concrete (unreinforced ) in ground floors and pavings not exceedidng 15cm thickness (below or above ground level) all as specified and directed.

M&L for 75mm thick PCC type D-2 (1:4:8) using 20mm graded stone aggregate as in sub base etc complete all as specified and directed

M&L For 25 mm thick, type B-1, 1:2:4 (20mm graded stone aggregate) as in sub base etc complete all as specified and as directed.

M&L for screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 all as specified and directed.

S & F vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and directed.

S & F Non- skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc. complete all as specified and directed.

S & F vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and directed.

M& L rendering 10mm thick cement mortar in 1:4 as in backing coat complete all as specified and directed

M&L for glazed ceramic coloured tiles in vertical surface 350mmx250mmx7mm /450mmx350mmx7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over backing coat 10mm thick cement mortar 1:4 complete all as specified and directed,

Dismantling stone slab and tiles of any description and thickness as in floor including cement mortar bedding and rubbish off the premisses complete all as specified and directed.

M&L machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and pointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

All as per item No.26 above, but in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement to match complete over and including 10mm thick cement screed in CM 1:4 complete all as specified and directed.

M& L 20 mm thick ,Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite etc complete all as specified and directed.

M&L machine cut cuddappah stone slab 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Roundidng to edges of stone slabs, such as in steps, cooking platform and other similar situation complete all as specified and directed.

Taking up or down 15mm bore steel water tubing & connections, including cleaning for refixing or offering credit as per schedule of credit all as directed.

All as per item No. 31 herein before but 20mm bore

S&F 15mm bore medium grade galvanised steel water tubing with all fitting & fixed complete to walls or ceiling or laid in floors all as specifeid and directed.

S&F 20mm bore medium grade galvanised steel water tubing with all fitting & fixed complete to walls or ceiling or laid in floors all as specified and directed.

Refixing 15mm bore old steel water tubing & connection in new or old position of wall, ceiling, floor etc all as specified and directed

All as per item No. 35 herein before but 20mm bore.

S&F in repair under counter wash basin vitreous China coloured including CI bracket, 15 mm dia. Polythene connection, 32mm dia chromium plated (CP) waste coupling, chain and plug waste fitting union and 32mm dia PVC waste pipe 90cm long and all necessary inlet outlet connections etc. complete all as specified and directed. Make : Hindware cat No. 10065 or equivalent approved make indicated in list of makes in tender.

M & L for coupled closet (Clover) snow white, size 360x640x685mm, make Jaquar including P or S trap along with cistern dual flush complete set with soft close plastic seat cover complete as specified and directed including taking down old wash down water closet pan of any description any size. Make : Jaquar, code SLS-WHT-6851P180PP or equivalent approved make by GE-B/BA/WC/JAQ/C/0006, Make : Jaquar and bottle trap. Make : Jaquar code 164071N-CP, or equivalent approved make as indicated in list of make of tender including taking down old u/s one complete all as specified and directed.

M & L for cutting chases, pinning in stone, concrete block or slab walls and making good to facings where required and plastering work in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, cutting n. exc. 10cm girth complete all as specified and directed by Engr-in-charge.

S&F in repair brass chromimum plated two way bib cock fancy type, 15mm bore (min Wt. 550 grams) of approved make by EIC/ GE etc.complete all as specifed and directed.

S & F brass chromium plated, 15 mm bore health faucet, (flexy type) 1.00 mtr. Long of approved make by EIC/GE etc. complete all as specified and as directed.

S & F in repair brass CP pillar tap long neck with 450 mm long braided hose chrome finish complete all as specified and directed by Engineer-In-charge. Make : Jaquar cat No. CQT-230218 or equivalent approved make indicated in list of makes in tender as approved by GE

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete

S&F in repair 15mm fancy type bib tap, chromium plated with crutch or butterfly handle, screwed down , screwed for iron pipe or for brass ferrule complete all as specified and directed

S&F in repair 15mm dia stop valve chromium plated fancy type screwed down high pressure with crutch or butterfly handle screwed both end for iron pipe or for union complete all as specified and directed.

M&L cement concrete type E-2, 1:5:10 (40 mm graded stone aggregate) lean concrete as in sunken floor for filling etc. complete all as specified and directed.

M&L 40mm thick cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) as in sunken floor complete all as specified and directed.

M&L 15mm thick plastering in CM 1:3 along the wall of toilet and bath mixed with 3 % WPC and finished even and smooth without using extra cement complete all as specified and directed.

Supply only integral WPC all as specified and directed.

M&L bitumen blown any grade applied hot, two coats to concrete surfaces at the rate of 1.5 kg per sqm per coat complete all as specified and directed.

M&L Polythene film black 50 micron laid in floor complete all as specified and directed.

S&F in repair 75mm PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

All as per item No. 52 above, but 110mm complete all as specified and directed.

S&F in repair 75mm PVC (SWR) bend any radius complete all as specified and directed

All as per item No. 54 above, but 110mm dia complete all as specified and directed.

S&F in repair 75mm PVC (SWR) junction single (single T) equal or unequal complete all as specified and directed.

All as per item No. 56 above, but 110mm bore of pipe complete all as specified and directed.

M&L in repair 75mm PVC (SWR) floor trap with grating including jointing with solvent cement complete all as specified and directed.

All as per item No. 58 above, but 110mm complete all as specified and directed.

S&F in repair 75mm PVC (SWR) vent cowl complete all as specified and directed.

All as per item No. 60 above, but 110mm complete all as specified and directed.

S&F in repair stainless steel sink , made out of 1.00 mm thick sheet for kitchen with plug, washer pipe cast iron cantilever brackets, connecting union overall size 495x420mm bowl size 410mm x 330mm x160mm all as specified and directed. Make: Nirali/Diamond/Blue King/Kingston/

S&F in repair Brass chromium plated tubular towel rack with lower hanger (stainless steel) with hook 60cm long between flanges of make Jaquar, code No. AHS-CHR-158H etc. complete all as specified and directed by Engr-in-charge.

M&L for stainless steel 202 material staircase railing of ht 1.00 m with Top rail pipe 50mm bore (16 gauge), vertical pipe 40mm bore (16 gauge) @ not exc 1.00 m c/c and at turning and corners with 10 mm thick toughened glass of height 0.75 m and necessary fitting for fixing of glass, including Tee, cross, bend, base coupling, fixed in floors with necessary fastner complete glossy finish complete all as specified and directed.

S&F sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with stainless steel bracket guard and railing 60 cm long etc. complete all as specified and directed.

S& F in repair Soap dish holder complete as specified and directed by Engr-in-Charge. (Make : Jaquar)

S & F in repair Toilet paper roll holder with flap complete as specified and directed by Engr-in-charge. Make : Jaquar.

S & F in repair wall mixer brass CP with provision for overhead shower with 115mm long bend pipe on upper side connecting legs & wall flange chrome finsih complete all as specified and directed by Engineer-in-charge. Make : Jaquar cat No. FUS-29273 UPR or equivalent approved make indicated in list of makes in tender as approved by GE.

Taking down chowkats or frames with shutter (without taking off shutters from the frames) not exc. 1.5 sqm each and removing from sitecomplete all as sepcified and directed.

All as per item No.70 above, but exc. 1.5 sqm and n.exc. 4 sqm complete all as specified and directed.

S&F 2nd class hard wood plain solid straight chowkhats and frames, wrought, framed rebated on the solid rounded or chamferred,put together with glue pinned at joints complete all as specified and directed

S& fixed 2nd class hard wood 35 mm thick glazed and skeleton shutters open rebated and prepared to rceieve glass, gauze,etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of shutters as spfd in SSR Part-1, Section 8, clause 8.24 (a) complete all as specified and directed .

S& fixed factory made plain framed panelled shutters 35mm thick of 2nd class hard wood (any number of panels) with panels of timber flat on both sides feather edged or panel of 9mm BWP commercial ply or 12mm thick veneered particle board with commercial face veneers fixed to chowkhat . The size of rail and stile as per IS : 1003 (Part-1), kiln seasoned and chemically pressure treated complete all as specified and directed.

M&L for preparing new surface of wood of any decription , not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all, as specified and directed.

S & F Mild Steel works as in bands straps, hold fasts etc, conforming to IS-2062-2006 (Fe-290), embedded portion duly painted with bituminous paint and sanded, complete all as specified and directed.

M & L for preparing surface of iron and treating small articles such as stop, covers, gully grating, holdfasts, end of posts area exc 0.1 Sqm each complete all as specified and directed.

M & L for cement concrete type B1 (1:2:4) using 20mm graded stone aggregate as in copings, bed plates, fixing of hold fasts and other similar works and the like incl weathering, slightly rounded or chamfered angles and throating as directed incl use and waste of necessary form work complete all as specified and directed.

S & F powder coated Aluminium sliding windows three track with two glass shutters using 5 mm thick glass tinted Modi guard and one shutter with stainless steel wire gauge wire cloth 0.31mm nominal dia of wire and width of aperture 1.61mm, using Aluminium powder coated sect, aluminium leat, PVC track, bearing, handle lock rubber beading, etc complete including taking down old window of any size. Note: Size of aluminium sections are as under :- (i) Three track top & vertical – Jindal main – 2010 Section No 20621. (ii) Three track bottom - Jindal main – 2010 Section No 20620. (iii) Shutter vertical section - Jindal main – 2010 Section No 20606. (iv) Shutter top & bottom - Jindal main – 2010 Section No 20604 (v) Shutter vertical middle (interlock) - Jindal main – 2010 Section No 20605.

S & F Aluminium powder coated ventilators partly fix and partly lowered of aluminium section designed DG-2762 (40 mm x 32 mm x1.5 mm thick) (wt 0.668 kg/mtr) frame and DG-2763 and middle section of designed DG-2763 (40 mm x 32 mm x 1.5 mm thick) (wt 0.654 kg/mtr), middle section DG-2546 (17.27 mm x 17.15 mm x 1.22 mm thick) (wt 0.124 kg/mtr) including 5 mm thick pinheaded figured glass louvers with blades of 100 mm heavy duty including with aluminium lever handle fixed panel shall be provided with 5 mm thick pin headed figured glass including all necessary rubber packing, anodized aluminium snap beading fixed with minimum 6 Nos of suitable size galvanised screws with PVC plug etc including taking down old ventilator etc. complete all as specified and directed.

M&L for framed work such as grills or grating etc with ends of bars shouldered as framed guard bars conforming to Fe-290 Gde-E-165 all as specified and directed.

S & F solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube etc all as specified and as directed.

S & F factory made solid PVC moulded door shutter, 30 mm thick 2mm thick 3D wood grain Moulded PVC sheet polyurethane painted on the front face & 2mm plain colour PVC sheet on back face complete all as specified and as directed.

M&L 18/19mm thick Pre-laminated board exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination , fixed with screw to timber frame including taking down existing board of any description complete all as specified and directed.

Extra over rates of block board or veneered particle board for external teak wood 18/19mm lipping 6mm thick fixed with nails

M&L 18/19mm thick particle board, medium density, flat pressed single line layer type or three layer type with BWR type adhesive fixed with screws to timber frame including dismantling existing board complete all as specified and directed.

S&F 150mm hasp and staple, mild steel, wire type stove enamelled black, including bolt to hinge plate and fixed with screw.complete all as specified and directed.

S & F Mild steel butt hinges medium weight , cold rolled, 100mm, ISI marked, complete all as specified and directed.

M&L barrel tower bolts stove enamelled black of size 200 mm complete all as specified and directed.

M&L barrel tower bolts stove enamelled black of size 150 mm complete all as specified and directed.

S&F 125mm long aluminium anodised handles or extruded section complete all as specified and directed.

S&F 150 mm long aluminium anodised handles or extruded section complete all as specified and directed.

S&F 300mm long aluminium alloy, anodised , sliding door bolt with hasp , staple,(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F Mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and width of aperture 1.18mm & fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

Demolition of brick or stone/boulder masonry , built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

M&L precast solid block masonry of block 1:3:6 type C-1 wall exceeding 10 cm in width and built in cement mortar 1:6 complete all as specified and directed.

M&L 15mm thick plastering on concrete surface in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

Raking out joints/pointing to random rubble masonry, polygonal rubble uncoursed or brought upto course complete all as specified and directed.

M&L raised pointing in CM 1:4 to random or polygonal rubble, uncoursed or brought upto course complete all as sepcified and directed.

Taking down cement plaster on brick or stone walls or concrete surface etc including raking out joints, hacking for key scrubbing down with water all as specified and directed.

M&L rendering 15mm thick on stone masonry surfaces in CM 1:6 finished even and smooth with sagol over and including dubbing out average 10mm thick on irregular face of walls in CM 1:6 complete all as specified and directed.

M&L rendering 5mm thick on concrete surfaces in CM 1:3 on ceiling, finished even and smooth with sagol all as specified and directed.

M&L 15mm thick cement plastering on concrete surfaces in CM (1:4) finishing surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L preparing newly plastered surfaces of wall and applying two coats of oil bound distemper over one coat primer on walls complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying three coats of white wash on ceiling all as specified and directed.

M&L Preparation of newly plastered or unplastered surfaces on wall surfaces and applying two coats of cement base paint complete all as specified and directed.

M&L PCC 1:2:4 type B-1(Using 20mm graded crushed stone agg) in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directed

M&L complete removal of existing treatment and applying 3mm thick Birla wall care putty and applying two coat of oil bound distermper white or tinned over a coat of primer on walls, etc all as specified and directed.

All as per item No. 109 above, but two coat of cement base paint without wall care puttycomplete all as specified and directed.

All as per item No. 109 above, but two coat of white wash on ceiling complete all as sepcified and directed.

S&F in repairs 19/20mm dia MS pipe powder coated of approved colour as in decorative type curtain rods including brackets for fixing curtain rod all as specified and as directed.

S&F in repairs brackets powder coated of approved decorative type suitable for fixing curtain rods of 19/20mm dia pipe incl fixing screws, drilling etc as per sample approved by Engr-in-charge all as specified and as directed.

M&L cement concrete 1:3:6 type C-2 (40mm graded stone aggregate) as in floors plinth protection, path etc 75mm thick smooth finished surface without using extra cement complete all as specified and directed.

Chipping off loose concrete/plaster upto sound stratum of RCC members such as slab, chajjas, columns, beams and clean the surface with wire brush, washing down with water using water jet including necessary scaffolding & propping to support the structural members where work is to be executed and removing debries to a distance exc. 250 meter but n. exc. 500 meter.

Providing and applying rust inhibition coat system (in two coats) as per manufacturer's instructions to exposed reinforcement after cleaning and removing scales and rust complete all as speicifed and directed by Engineer-in-charge.

Providing and applying a bond coat (epoxy based materials) to all exposed concrete surfaces all as per the manufacturer's instructions as specified and directed by Engineer-in-charge.

Providing and applying latex polymer modified cement mortar in specified composition of system [i.e. cement 400 parts by weight, quartz sand 1600 parts by weight, polymer 60 parts by weight, water 120 parts by weight] to RCC surfaces all as per the manufacturer's instructions as specified and directed by Engineer-in-charge. (Note : Thickness of plaster/filling varies from 15mm to 25mm)

M&L treatment of soil under existing floors using emulsion @ one litre per hole, 300 mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 to match the existing floors

Supply and fixing stainless steel kitchen cup/ saucer/ kitchen utensils, holder basket, corrosion resistance, seamless glosy finish, nickel chromium plated using 5mm dia. Wire/ stainless steel perforated sheet assembled and fabricated as required size and finish, including telescopic drawer channel of stainless steel zinc finish (silver colour ) of weight capacity minimum 35 kgs including necessary fixing arrangements hinges and stainless steel screws, with solid handle of stainless steel chromium plated of 200 mm 'D' shape including necessary fixing arrangements hinges and screws, ball catches with 8mm dia. steel ball and brass body and striking plate including letting in and necessary fixing arrangements hinges and stainless steel screws and veneered decorative plywood grade 1 (with BWR resin) with decorative face veneers on one side as in drawers/ cupboards moulded as required including necessary fixing arrangements and length of platform not exceeding 5.00 RM etc. complete all as specified and directed by Engineer-in-charge.

Taking down carefully copper/aluminium point wiring (light, fan,bell, socket or power) complete, including fixture and fittings such as switches, Ceiling rose, pendents, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc . credit for above items should be made as per conditions separately.

Taking down ceiling fans any type/sweep 230 V AC and refixing after cleaning and making connection complete.

M&L for point wiring with FRLSH cable 1.5 sqmm PVC insulated (red for phase and black for neutral) unsheathed, multi stranded copper conductor 1100 volt grade in and incl not less than 2mm thick PVC casing/caping with all accessories and 1.50 sqmm green in colour PVC copper conductor cable for earth continuity connected to common earth dolly incl PVC box surface type with PVC modular white cover plate for mounting fittings such as switches, sockets, fan regulators etc complete all as specified and directed for one light/fan /bell point controlled by one switch & making good to disturbed surface of wall etc

All as per item No.123 above, but for one multipin 5 amps socket outlet on same board with other switch complete all as specified and directed.

All as per item No.123 above, but for one multipin 5 amps socket outlet on independent board with other switch complee all as specified and directed.

All as per item No.123 above, but for one light point controlled by 2, 2 way switch complete all as specified and directed.

All as per item No.123 above, but with 2.5 sqmm cable and 2.5 sqmm for earth continuity for multipin 15 amps socket outlet flush type on independent board complete all as specified and directed.

S & F in replacement ceiling rose, 3 phase PVC/polycarbonate isolated body, surface bakelite 65 x 50 mm, 3 terminal incl PVC square block complete all as specified and directed.

S & F in replacement lamp holder, PVC/polycarbonate type with back plate suitable for batten fitting incl PVC square block complete all as specified and directed.

S & F in replacemnet Call bell ding dong AC, 230 Volts, single pole complete all as specified and directed.

S&F in replacement switch Modular, one way 6 amps, 1 module with suitable plate and cover complete as per existing make and model all as specified and directed.

S&F in replacement switch Modular, two way 6 amps, 1 module with suitable plate and cover complete as per existing make and model all as specified and directed.

S&F in replacement switch modular one way 16 amps, 1 module with suitable plate and cover complete as per existing make and model all as specified and directed.

S&F in replacement socket modular 6A, 2/3 pin combined 2 module with suitable plate and cover complete as per existing make and model all as specified and directed.

S&F in replacement socket modular 6A/16A, 2/3 pin combined 2 module with suitable plate and cover complete as per existing make and model all as specified and directed.

S&F in replacement modular fan regulator step type 120W, 2 module with suitable plate and cover complete as per existing make and model all as specified and directed.

S&F in replacement modular bell push 6 Amps 1 module with suitable plate and cover complete as per existing make and model all as specified and directed.

S&F surface and wall mounted LED batten (LED tube light fitting 20W) with polycarbonate housing & integrated electronic driver alongwith LED tube 20 watt and 02 No PVC square blocks incl taking down old UNSV fitting. Make: Havells cat No LUMILINEBS20WLED830SPCWH or equivalent of Philips/Bajaj

S&F surface and wall mounted LED batten (LED tube light fitting 10W), extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver alongwith LED tube 10 watt and 02 Nos PVC square blocks incl taking down old UNSV fitting. Make: Havells cat No ENDURALINEARNEOBS10WLED830SPCWH or equivalent of Philips/Bajaj

S&F endura gugby NEON- IP 65 environmental friendly, ultra modern energy saving surfae mounted decorative oval bulk head edge lit LED luminaire comprising of high brightness LED 10 Watt including taking down old UNSV fitting. Make : Havells cat No RUGBYNEONFT10WLED860SSYMTOPC or equivalent of Philips/Bajaj

S&F building security LED light fitting 25 Watt , energy saving and environmental friendly long life LED fitting made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP 66 protection and impact resistance of IK 07 incl taking down old UNSV one. Make - Havells cat No ENDURAPEARLSL25WLED757SASYTOPC or equivalent of Philips/Bajaj

S&F decorative wall light fittings (bracket light), CITY 3 made up of polycarbonate suitable for 10 watt LED lamp incl taking down old UNSV one. Make: Havells cat No LHDL06160099 or equivalent of Philips/Bajaj

M&L for sub main wiring with two run of 6 sqmm single core multi stranded PVC insulated and unsheathed copper conductor (red for phase and black for neutral) of grade 1100 volt FRLSH cable in and including 1100 volt electrical grade PVC casing caping of desired colour not less than1.2 mm thick and 25 mm wide & 6 sqmm copper conductor cable PVC unsheathed green coloured for earthing with complete accessories duly connected with earth dolly complete all as specified and as directed including taking down old unserviceable one.

All as per item No.143 above, but size 4 Sqmm two runs and with one run 4.0 sqmm FRLSH copper wire for earth continuity.

S&F in replacement enclosure, single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amps, 240 volt all as specified and directed.

S&F in replacement MCB distribution board Double door SPN 240 volts 8 way with 200 amps rated bus bar and making good to disturbed surfaces of floors walls etc all as specified and directed.

S&F in replacement MCB distribution board double door 240 volts 4 way with 200 amps rated bus bar and making good to disturbed surfaces of floors walls all as specified and directed.

S & F in replacement MCB SP 6 to 32 Amps, 230 V AC all as specified and directed.

S & F in replacement MCB SPN 40 Amps, 230 V, AC all as specified and directed.

S & F in replacement MCB SPN 20 Amps, 230 V, AC all as specified and directed.

M & L for earthing complete with GI earth plate electrode of size 60 x 60 x 0.6 cms thick burried directly in ground vertically at a depth of not less than 2.25 Mtrs below normal ground level with top edge of the earth plate not less than 1.5 mtr deep below normal ground level connected to galvanised iron strip of 25 x 4 mm as earthing lead by means of nuts, bolts and washers of steel after welding of GI strip to earth electrode to the full length of earth plate, 40 mm dia GI tubing light grade protection pipe upto test point, 20 mm dia GI watering pipe with funnel and wire mesh, PCC pit 1:3:6 with pit cover of size 30x30 CM made of RCC 1:3:6 with suitable handle, angle iron frame of angle iron size 40 x40x4mm, adequate qty of charcoal dust and salt layers all around the earth plate, removal of surplus soil and returning filling in all as required at site all as specified in electrical plate No 3 of SSR Part-I and directed by Engr-in-Charge.

M&L in LED lamp 9 watt complee all as specified and directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc including taking down old existing one and deposited to AGE E/M store yard.

Taking down old unsv exhaust fan and deposited to AGE E/M store yard complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm

M & L for grit cushioning below interlocking paver block including spreading and levelling complete all as specified and directed.

M & L for 60mm thick machine pressed precast concrete interlocking paver block reflective type coloured any shape and size conforming to IS 15658-2006 of M-35 grade complete all as specified and directed.

M & L for filleting in any position and to any shape in cement, cement mortar 1:4 including all mitres, stops, including sectional area n. exc. 25 sqcm etc complete all as specified and directed.

GGS Infra

UNIQUE ENGINEERS

N AND G CONSTRUCTION

Decent Decorators

AJINKYA VIKRAM GAIKWAD