REPAIR OF E/M NATURE WORKS INCLUDING REPLACEMENT OF U/S ELECTRIC INTERNAL WIRING WITH FITTINGS AND FIXTURES AT OTM MD ACCN AT KHANPUR DUNDAHERA AND MANESAR ARMY CAMP AND REPAIR/REPLACEMENT OF U/S INTERNAL ELECTRIC WIRING WITH FITTINGS AND FIXTURES AT

Amount

Attending complaints for checking the existing electrical items for continuous electric supply including carrying out minor repair(s) etc as required to make the item functional and replacing fuse, small pieces of copper wire, copper cable as of suitable size at site, insulation tape roll etc., Attending minor repair(s) such as testing, connections, fittings, nut, bolts screws etc to ceiling fan, exhaust fan (without taking down) etc, emergent complaints i.e. no light, earth leakage, short circuit, neutral break in mains/sub mains/ internal circuits of existing electrical system of main building/block and making continuous electric supply including carrying out minor repairs etc. required to make the system in order/functional with insulation tape roll, copper thimbles, glands, earthing wire as required at site complete all as specified and directed by Engineer-in-Charge. Notes :- 1. Payment for complaint under this item shall only be made for those complaints "where no stores is used"/Complaint for "No Light". The complaint where stores is used shall not be paid under this item. The complaint for "No light" shall be attended immediately/On priority and other complaints shall be attended on the same day but not later than 24 Hrs, failing which recovery as specified shall be effected from contractor's dues 2 Contractor shall be attending complaints 24 hours of contractor is not able to rectify the complaint penalty shall be charged as given below :- (a) Upto 06 Hours: nil (b) Exceeding 06 to 12 Hours @ Rs 100/- (c) Exceeding 12 but not exc 24 Hours @ Rs 200/- (d) Subsequently for 24 Hours @ Rs 250/- . 3. Complaint register, complaint slip ,pen, gum bottel etc with an attendent will be provided by the contractor for keeping record of complaints without any extra cost. 4. The Contractor will ensure that the team of electricians with necessory tools bag shall always remain present at complaint cell to attend the complaints as per requirement at each area mentioned in CA. 5.The MES Department is not responsible for the payment of electrician and attendants, as all the items of CA are to be supply and fixed by the contractor.

S&F in replacement of switch piano flush type 6 Amps SP one way complete all as specified and directed by Engineer-in-Charge. (Make : Cona/Kinjal/SSK)

S&F in replacement of switch piano flush type 6 Amps SP 2-way complete all as specified and directed by Engineer-in-Charge.. (Make : Cona/Kinjal/SSK)

S&F in replacement bell push, flush type 6 Amps complete all as specified and directed by Engineer-in-Charge. (Make : Cona/Kinjal/SSK)

S&F in replacement of socket outlet 6 Amps flush mounted piano type 5 pin multi purpose complete all as specified and directed by Engineer-in-Charge. (Make : Cona/Kinjal/SSK)

S&F in replacement of switch piano type 16 Amps SP one way complete all as specified and directed by Engineer-in-Charge. (Make : Cona/Kinjal/SSK)

S&F in replacement of socket outlet 2 in 1 (multipurpose) 6 pin 6 and 16 Amps flush mounted type complete all as specified and directed by Engineer-in-Charge. (Make : Cona/Kinjal/SSK)

S&F in replacement of lamp holder bakelite insulated body with back plate suitable for batten fitting complete all as specified and directed by Engineer-in-Charge. (Make : Cona/Kinjal/SSK)

S&F in replacement of bell Ding dong type 230 volts single phase complete all as specified and directed by Engineer-in-Charge. (Make : Cona/Kinjal/SSK)

S&F in replacement ceiling rose surface Bakelite 65x25 mm two to three terminals complete all as specified and directed by Engineer-in-Charge. (Make : Cona/Kinjal/Anchor)

S&F in replacement of fan regulator electronic, stepped type, Switch type, suitable for ceiling fan 1200/1400mm sweep complete all as specified and directed by Engineer-in-Charge. (Make : Cona/Kinjal/SSK)

S&F in replacement of fan condenser 2.5 Mfd complete all as specified and directed by Engineer-in-Charge.Make :- Epcos/Tibcon/Havells

S&F in replacement of fan condenser 3.15 Mfd complete all as specified and directed by Engineer-in-Charge.Make:- Epcos/Tibcon/Havells

S&F LED Glass Bulb 09 Watt B-22 Cap, AC 230V, 50 Hz, suitable for Batten Holder/Bulk head/SK light fittings in replacement old unsv CFL any watt of complete all as specified and directed by Engineer-in-Charge. Make:-Bajaj/Philips/Syska/Havells

S&F in replacement Comfortable wall light for LED Bulb B-22 Cap Cat LHFHCHE1TL1W020 of Havells or equivlent complete all as specified and directed by Engineer-in-Charge. Make:- C&S /CG/Bajaj/Phillips).

S&F in replacement LED 6 watt white Bulk head in engineering plastic housing with clear prismatic including all accessories connecting up twisted flexible copper conductor cable of suitable size of 230 V, 50 Hz complete. Cat LHKL01160099 of Havells or equivlent make in C&S /CG/Bajaj/Phillips) complete all as specified and directed by Engineer-in-Charge.

S&F of LED Batten T-5 fitting 20 watt LED White, indoor decorative aluminum extruded T5 LED battern -integrated type complete in replacement of old unsv existing 36 Watt tube light fitting, Cat Part No LTTB4F20WLED/W of Make : C&S or equivalent complete all as specified and directed by Engineer-in-Charge. Make:- Havells/Halonix/Philips/CG

S&F LED Integrated Batten T5 10 watt - 2FT White, indoor decorative aluminum extruded T5 LED battern -integrated type complete with including fliexble wire all as specified and directed in replacement of old unsv existing 18 Watt tube light fitting,. Cat Part No LTTB2F10LEDP/W complete all as specified and directed by Engineer-in-Charge Make : C&S or equivlent Make in Havells/Bajaj/Philips/CG.

S&F Surface mounting round/square shaped LED downlighter with PDC aluminum housing 6 Watt LED lamp type in replacement of old unsv existing CFL fitting any type from ceiling of stairs/common areas, complete all as specified and directed by Engineer-in-Charge. Make : Havells, Model - LTCRSUR6HPLEDRND/W OF C&S or equivalent in Bajaj/Philips/CG/Havells.

S&F LED Building security light fitting 30W on existing bracket in replacement of old unsv existing security light fitting any type all as directed. Cat Part No LTESS30WLED/LS of C&S (Make :- Havells/CG/Bajaj/Phillips).

S&F LED Building security light fitting 45W on existing bracket in replacement of old unsv existing security light fitting any type all as directed.Cat Part No LTESSI45WLED/LS of C&S (Make :- Havells/CG/Bajaj/Phillips).

S&F in replacement Circuler Hylam/PVC Sheet upto 10 Cm dia of 3 mm thick (for using as Junction box Cover) including screws and cup washer complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of plastic laminated sheet top cover 3mm thick of size 5"x5" fitted with MS galvanised screws and cup washer including shifting of all fixtures from the old switch board and connection complete all as specified and directed by Engineer-in-Charge. Make :- Anchor, Hylum, Mayur.

S&F in replacement of plastic laminated sheet top cover 3mm thick of size 8"x5" fitted with MS galvanised screws and cup washer including shifting of all fixtures from the old switch board and connection complete all as specified and directed by Engineer-in-Charge. Make :- Anchor, Hylum, Mayur.

S&F in replacement of plastic laminated sheet top cover 3mm thick of size 11"x9" fitted with MS galvanised screws and cup washer including shifting of all fixtures from the old switch board and connection complete all as specified and directed by Engineer-in-Charge. Make :- Anchor, Hylum, Mayur.

S&F in replacement of PVC insulated FRLS single core with stranded copper cable of size 1.5 Sqmm single core for any type of wiring as per site requirement and directed in Red/Blue/Yellow&Black&green colour complete all as specified and directed by Engineer-in-Charge. Make : Polycab/Havells/Finolex

S&F in replacement of PVC insulated FRLS single core with stranded copper cable of size 2.5 Sqmm single core for any type of wiring as per site requirement and directed in green colour complete all as specified and directed by Engineer-in-Charge. Make : Polycab/Havells/Finolex

M&L for submain wiring of two runs of 2.5 Sqmm size for main cable and one run of 1.5 Sqmm size earth continuity conductor of single core PVC insulated but unsheathed FRLS cable of specified size multistranded copper conductor 1100 volts grade IS-694 marked , drawn through existing steel/PVC conceiled conduit of size 25mm dia with all fittings accessories.complete all as specified and directed by Engineer-in-Charge. Make:- Cable Havells\Polycab\Finelox Note:- Two runs of 2.5 Sqmm & 1 run of 1.5 Sqmm shall be measured as one unit for payment purpose.

M&L for submain wiring of two runs of 6 Sqmm size for main cable and one run of 4 Sqmm size earth continuity conductor of single core PVC insulated but unsheathed FRLS cable of specified size multistranded copper conductor 1100 volts grade IS-694 marked , drawn through existing steel/PVC conceiled conduit of size 25mm dia with all fittings accessories complete all as specified and directed by Engineer-in-Charge. Make :- Cable Havells\Polycab\Finelox Note:- Two runs of 6 Sqmm & 1 run of 4 Sqmm shall be measured as one unit for payment purpose.

Taking down of ceiling fan/ exhaust fan dismantling of blades, transportation to work shop and carrying out rewinding, transportation to site, reinstallation and testing complete all as specified and directed by Engineer-in-Charge. Note:- Rewinding will be measured and paid under respective item of this Schedule.

M&L for rewinding of ceiling fan 1200 mm sweep by dismantling of fan motor cutting and removing of burnt windings, cleaning, winding with supper enameled copper wire of superior quality, same gauge of wire, same Nos of turns, provn of insulation paper applying of varnish drying of varnish and assembling of fan including replacement gun metal bush, ball bearing where ever required complete all as specified and directed by Engineer-in-Charge. Note:- Gun metal bush and bearing will be measured and paid under respective item of this Schedule.

All same as per ser item No 26 above but ceiling fan 1400 mm sweep

All same as per ser item No 26 above but exhaust fan 450 mm sweep

All same as per ser item No 26 above but exhaust fan 230/300 mm sweep

S&F in replacement Gun metal bush for fans complete all as specified and directed by Engineer-in-Charge.

S&F in replacement ball bearing of suitable size & model for ceiling/Exhaust fan complete all as specified and directed by Engineer-in-Charge. Make:- NBC/ SKF

S&F in replacement clamp with rubber real for hanging ceiling fans of 1200/1400mm sweep complete all as specified and directed by Engineer-in-Charge.

S&F in replacement single pole and neutral metal clad sheet steel enclosures with 2 pin and earth plug and socket complete with one no MCB SP upto 20 Amps as per site requirement of existing type complete all as specified and directed by Engineer-in-Charge. (Make of MCB : Legrand/Havells/ Crabtree/ HPL/Standard)

M&L for Aluminium lugs of size 6 Sqmm to 16 sqmm for connecting PVC cable complete all as specified and directed by Engineer-in-Charge.

M&L for Aluminium lugs of size 25 Sqmm to 95 sqmm for connecting PVC cable complete all as specified and directed by Engineer-in-Charge.

S&F in replacement MCB DB SPN 4 Way double door type,(IP 43 Protection) flush mounting with following MCBs complete all as specified and directed by Engineer-in-Charge. (Make/Model of DB : Legrand Cat No. 607710 or equivalent model of ABB /Crabtree )

S&F in replacement MCB DB SPN 8 Way double door type,(IP 43 Protection) flush mounting with following MCBs complete all as specified and directed by Engineer-in-Charge. (Make/Model of DB : Legrand Cat No. 607711 or equivalent model of ABB /Crabtree )

S&F in replacement MCCB 3 Pole 415V, Adjustable type, 100 Amps with breaking capacity 16 KA complete all as specified and directed by Engineer-in-Charge. (Make : Legrand/ABB/Crabtree).

S&F in replacement MCCB 3 pole, 415V, Adjustable type,160 amps with breaking capacity 36 KA complete all as specified and directed by Engineer-in-Charge. (Make : Legrand/ABB/Crabtree).

S&F recessed/Surface Mounting 36 Watt 2'x2' flat LED panel fitting with soft light and glare free symetrical ilumination suitable for POP ceiling supplied with wedge bracket to fix in existing POP ceiling including cutting/grouting of existing POP ceiling in replacement of existing old unserviceable CFL fitting any type from ceiing of stairs/common areas and making good a disturbed surface/POP ceiling to match with POP and getting electrically connected the fitting with switch board for suitable size of PVC copper wire complete all as specified and directed by Engineer-in-Charge. Make : Halonix of Cat Part No (Model) - HLFPR22-02-36-CW-R, 140-270V AC or equivalent in Bajaj/Philips/C&S/Havells.

S&F in replacement for MCB SP 10 to 40 Amps 240 Volts, 10 KA, `C' curve, complete all as specified and directed by Engineer-in-Charge. Make : Legrand/ABB/Crabtree

S&F in replacement for MCB SPN/DP 32/40/63 Amps, 240 Volts, 10 KA, `C' curve, complete all as specified and directed by Engineer-in-Charge. (Make : Legrand/ABB/Crabtree)

S&F in replacement MCB TPN/ Isolator 4P from 63/100 Amps 415 volts, 'C' Series 10 KA as per site requirement complete all as specified and directed by Engineer-in-Charge. (Make : Legrand/ABB/Crabtree)

Taking down Copper/Aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc complete all as specified and directed by Engineer-in-Charge.

M&L for point wiring, with PVC FRLS stranded copper conductor cable 1.5 Sqmm, in and including 'medium grade' PVC concealed conduit and new pressed steel terminals boxes (for mounting switches /sockets / regulators / ceiling roses etc) made of MS sheet and 6 cm depth laminated / backelite sheet fitted with brass screws and washers and drawing same size copper conductor cables as earth continuity wire, in green colour code connected incuding taking down old point wiring all as directed by Engineer-in-Charge (Phase neutral and earth wire shall be provided in strandard colour code R.Y.B for phase, black for neutral, green for earth wire for the following complete all as specified and directed by Engineer-in-Charge. ( Make of cable : Havells/Polycab/Finolex)

One light / fan/bell point controlled by one switch SP, one way, 230 volts.

One light point controlled by two 2-way switch 230 volts.

One 3 pin socket outlet 5/6 Amps on same board.

One socket outlet 5/6 Amps on independent board.

One power socket 15/16 Amp but with cable 4 Sqmm for phase & neutral and for earth 2.5 sqmm.

S&F distribution board triple pole and neutral 4 way for fixing MCCB 125 Amps as incommer and MCBs as out goings with metal door and IP 43 Protections and connecting,in replacement complete all as specified and directed by Engineer-in-Charge. ( Make : Legrand Cat Part No:- 607790 or equivalent model of ABB/Crabtree as approved by GE.

S&F in replacement MS fastner bolt 8mm dia and 100mm (Min.) long for fixing geyser/ Exhaust fan/Bldg security light etc with nut and washer complete all as specified and directed by Engineer-in-Charge.

Taking down geyser 25/35/50 ltrs capacity of any make, opening up complete for inspection descalling by chemical treatment of internal tank , themrostate pipe, base plate assembly carrying out minor repairs including replacement of gaskets testing and refixing in position including making electrical and water connection complete all as specified and directed by Engineer-in-Charge.

S&F in replacement heating element 1.5 KW in replacement for any make of geyser of 25 litres capacity as per sample complete all as specified and directed by Engineer-in-Charge. Make Micronking/Theeta/Standard

S&F in replacement heating element 2 KW in replacement for any make of geyser of 50 litres capacity as per sample complete all as specified and directed by Engineer-in-Charge. Make Micronking/Theeta/Standard

S&F in replacement thermostat ( 11 inch Long) in replacement for 25/50 ltrs capacity geysers complete all as specified and directed by Engineer-in-Charge. Make Micronking/Theeta/Standard

S&F in replacement indicating lamp round / flat type as required in replacement for geyser 25/ 50 litres capacity as per sample complete all as specified and directed by Engineer-in-Charge.

S&F in replacement safety valve ISI marked for geyser 25/50 litres capacity in replacement as per sample complete all as specified and directed by Engineer-in-Charge.

S&F in replacement safety plug for geyser 25/50 litres capacity in replacement as per sample complete all as specified and directed by Engineer-in-Charge.

S&F in replacement PVC connection with brass nipple 15 mm x 450 mm long in replacement for geyser 25/50 ltrs capacity as per sample complete all as specified and directed by Engineer-in-Charge.

S&F in replacement base plate geyser syphon assembly set complete with inlet, outlet and thermostat pipe including rubber gasket in replacement for any make of geyser of 25 litres cap as per sample complete all as specified and directed by Engineer-in-Charge.

S&F in replacement base plate geyser syphon assembly set complete with inlet, outlet and thermostat pipe including rubber gasket in replacement for any make of geyser of 50 litres cap as per sample complete all as specified and directed by Engineer-in-Charge.

S&F in replacement 25 Ltr inner stainless tank suitable for 25 Ltr storage water heater complete all as specified and directed by Engineer-in-Charge.

S&F in replacement 50 Ltr inner stainless steel tank suitable for 35/50 Ltr storage water heater complete all as specified and directed by Engineer-in-Charge.

M&L for welding /brazing the inner shell made out of stainless steel /copper sheet for geyser 25/35/50 ltrs capacity of any make and make the shell water tight including testing complete all as specified and directed by Engineer-in-Charge. Note:-Taking down, de-scaling, replacement of rubber gasket and any minior repair involved will be mesured and paid seperatly.

S&F in replacement rubber gasket for water heater storage type of any capacity fixed and suitable as per the existing, complete all as specified and directed by Engineer-in-Charge.

M&L Top & Bottom cover body suitable for 25 Ltrs storage water storage heater made of MS sheet complete as per site requirement complete all as specified and directed by Engineer-in-Charge.

M&L Top & Bottom cover body suitable for 35/50 Ltrs storage water storage heater made of MS sheet complete as per site requirement complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in replacement submersible water lifting pump,single phase suitable for desert coolers complete in all respect complete all as specified and directed by Engineer-in-Charge. Make:- Khaitan/Bajaj /Crompton Greaves..

Supply & Fixing in replacement cooler fan motor 1/7 HP or any HP 230 volt,50Hz cycles A/C supply complete all as specified and directed by Engineer-in-Charge. Make:- Summer Cool/ Hindustan /Havells complete in all respect.

Supply & Fixing in replacement capacitor, 4 mfd rating complete all as specified and directed by Engineer-in-Charge. Make:-Asian/Univarsal

Supply & Fixing in replacement wood wool pad (set of 3) suitable for 18 inch sweep desert cooler of good quality complete all as specified and directed by Engineer-in-Charge.

M&L for refilling of gas in 1.5 Ton AC/320 ltr capacity Deep Frzeer including necessary arrangement for gas filling.R-22/410 complete all as specified and directed by Engineer-in-Charge.

M&L for Earthing complete with galvanized steel earth plate 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate n.less than 1.5 m below normal ground level, connected to galvanized iron wire 4 mm as earthing lead by means of bolts, nuts, check nuts & washers of galvanized iron or steel besides building at all joints as shown in drgs and including excavation and earth work, GI pipe light grade 25mm bore of protection of GI wire from earth electrode, supply and laying charcoal dust, common salt, PCC (1:2:4) type B-1 Chamber and MS angle iron frame 40x40x3mm and RCC cover 40 mm thick (1:2:4) type B-1using 20 mm graded stone aggregate Reinforced with 6 mm dia round bars @ 75 mm C/C both ways with MS handle 12 mm dia , PGI funnel and wire mesh , 20 mm dia GI Pipe light grade for watering complete all as shown in drg and connected to earth test point including testing complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of electric bell (Buzzer) AC, 230 volts single phase complete all as specified and directed by Engineer-in-Charge. (Make : GM/Kinjal/Plaza/Havells)

S&F LED Glass Bulb 12 Watt B-22 Cap, AC 230V, 50 Hz, suitable for Batten Holder/Bulk head/SK light fittings in replacement old unsv CFL any watt complete all as specified and directed by Engineer-in-Charge. Make : Bajaj/Philips/Syska/Havells

S&F of Photon Ultra bright LED integrated batten polycarbonate tube light fitting with decorative end cap complete (single side connection) with very high efficacy suited for installation in replacement of old existing unserviceable T8 FTL 36 Watt tubelight fitting with G13 lamp holders to give glare free light of 20 Watt LED CRCA batten with decotative end cap complete all as specified and directed by Engineer-in-Charge.Cat Part No HLB-33-20-CW-IP Make : Halonix or equivalent Make in C&S/Syska/Bajaj/Philips/CG/Havells.

S&F LED Integrated Batten T5 10 watt - 2 Ft White, indoor decorative PVC extruded T5 LED battern -integrated type complete with including fliexble wire in replacement of old unserviceable existing 36 Watt tube light fitting with Cat Part No HLB-07-10-CW-IP complete all as specified and directed by Engineer-in-Charge. Make : Halonix or equivlent Make in Havells/Bajaj/Philips/CG/Syska/C&S.

S&F of LED 5 Watt batten type fitting, indoor decorative aluminium extruded T-5 LED Battern-integrated type (1 Ft) complete in replacement of old unsv existing 11Watt CFL light fitting, Cat Part No HLB-07-05-CW-IP complete all as specified and directed by Engineer-in-Charge. Make : Halonix or equivalent make as : Havells/Bajaj/Philips/CG/Syska/C&S

M&L Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicate dsituation for loop earthing etc. as required 4mm dia galvanised iron or steel wire complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of Metal clad plug and socket 20 Amps with MCB SP and steel enclosure complete all as specified and directed by Engineer-in-Charge.

Note:- The contract sum shall be after deducting the amount of Credit shown in Credit Schedule of this Tender.

M/s KUNDU CONSTRUCTION