SPECIAL REPAIR TO INTERNAL ROAD FROM CENTRAL MI ROOM TO BLDG NO T-49 AT E ZONE AND NEAR XXXXX AT RANGAPAHAR MILITARY STATION

Amount

Material and labour for repairs to potholes of depth n.exc 30mm and area not exc 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25mm in depth, making good by applying tack coat @ 5 Kg per 10Sqm (VG-10), putting in premixed bituminous macadam, well rammed and sealed with binder 9.80 kg per 10 sqm (using paving bitumen VG-30), binded with 0.09 cum of stone chippings, 6.30 mm size and again well rammed (including supply of premixed macadam, binder and chippings), rolled with vibratory power roller 8 to 12 tonne and compacted to required camber and gradient and finishes to a uniform and smooth surfaces complete all as specified and as directed.

Material and labour for scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc. 400Sqm and depth exc. 50mm but n. exc. 100mm deep complete all as specified and as directed.

Material and labour for 75 mm thick WBM (compacted thickness) with broken metal of granite, trap or basalt stone of grading 2 (63mm to 40mm) or grading 3 (50 to 20mm size) spread, rolled with 8 to 12 tonne power roller and consolidated to required camber and gradient complete all as specified and as directed.

Material and labour for Preparing unsurfaced WBM surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with compressor to remove all dirt etc. and applying evenly a priming / tack coat with bituminous primer at 10 KG per 10 Sq.m of paving bitumen of VG-10 complete all as specified and as directed.

Material and labour for Preparing old black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with compressor to remove all dirt etc. and applying evenly a priming / tack coat with bituminous primer at 2.5 KG per 10 Sq.m of paving bitumen of VG-10 complete all as specified and as directed.

Material and labour for Preparing old black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with compressor to remove all dirt etc. and applying evenly a priming / tack coat with bituminous primer at 5 KG per 10 Sq.m of paving bitumen of VG-10 complete all as specified and as directed.

Material and labour for premix bituminous macadam (using paving bitumen VG-30) laid / rolled and compacted to required gradient and camber (consolidated thickness 75mm or less), rolled with 8 to 12 tonne vibratory power roller complete all as specified and as directed. Note :- Binder content, paving bitumen VG-30 shall not be less than @ 4.5% by weight of total mix. All materials are prepard by hot mix plant.

Material and labour for bituminous premix semi-dense asphaltic concrete 40mm consolidated thickness with 5.5% paving bitumen grade VG-30 as a binder content by weight of total mix and grading of aggregates & design criteria as specified in SSR Part-I clause No 20.B.2.5.4(d) & 20.B.2.11 and mix at hot mix plant, spread with mechanical paver rolled and consolidated to gradient and camber with vibratory power roller 8 to 12 tonne and all as specified in para 20.B.4 & sub para 20.B.4 of MES Schedule Part-I complete all as specified and as directed. Note: (i) For job mix formula design purpose binder shall be as described i.e. 5.5% for VG-30 grade bitumen. (ii) No price adjustment shall be applicable if the approved quantity of binder as per design mixed is more than 5.5%. (iii) During design stage if binder content used less than 5.5% necessary price adjustment on quoted rate shall be done as per actual binder content used. (iv) Design to be got approved from GE

Supply and fixing in Repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector fixed with and incl MS stud of suitable size as per manufactures instructions.

Supply and fixing in Repair solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed

Material & Labour for Road Marking Strips, Lines, Dashes, Arrows, Letters etc of 2.5 mm thick [Reflective Type] of approved colour conforming to BS 3262-1989 on roads, pavements and the like not exceeding 10cm wide with Hot Thermo Plast material by fully automatic thermoplastic paint applicator machine, fitted with profile shoe, glass beads dispenser, propane tank heaters and profile shoe heater, driven by skilled operator on road surface complete as per MoRT & H specifications including cleaning the road surface of all dirt, scales, oil grease and foreign materials etc complete all as specified and as directed.

Material & Labour for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

M/S ORIENTAL MOTORS COMPANY (BID ID -3296091)

M/S SHANTI UDYOG (BID ID -3298268)

VAISHNO ASSOCIATES (BID ID -3295971)

M/S SANJAY ENTERPRISES (BID ID -3297454)

commercial enterprises (BID ID -3298199)