Augmentation and improvement of various LWSS under Bhoranj Constituency under ADB District Hamirpur Source level augmentation and providing left out FHTC under Jal Jeewan Mission in GP Bhakera

Excavation in foundation trenches etc. in all kinds of soil such as pick work,jumper work blasting work in soft or hard rook or by cum chiselling soft/ hard rock where blasting is prchibited in all leads and lif-ts including trimming and dewatering where ever required dressing of sides and bed stacking the excavated soil clear from the edge of excavaton and then returning the excavated soil after completion of work in 15cm layers when required into plinths, side of foundation etc. Consolidating each deposited layers by remming and watering and then disposing of all surplus excavated earth as direction within a lead of 20 mtrs. pick jumper work 50% each.

Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalent 600x1200mmx10mm manufactured of approved shade and colour in flooring,treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete.

White glazed tiles 8 to 10 mm thick in flooring, treads of steps and landing laid on a bed of 12 mm thick cement mortar 1:3(1 cement :3sand) finished with flush pointing in white cement complete in all respect including carriage of material in all leads

Providing and fixing panalled glazed or panelled and glazed shutters for door, windows and clerestory windows including black emamelled iron butt hinges with necessary screws 40 mm thick using 2nd class Indian Teak wood.

Providing and fixing wire gauge shutter using galvanised MS wire gauge of IS gauge desigation 85 G with entire dia of .56 mm for door windows and clerestory window I/C bright finished black enamelled butt hinges necessary screws complete 40 mm thick 2nd class Indian Teak wood.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops,dust and other foreign matters sand papered smooth to give final matt finish to the surface complete.

Applying priming coat over new wood and wood based surface after and I/c preparing the surface by thoroughly cleaning oil, grease,dirt and other foreign matter with ready mixed paint other than white as per direction and to the entire satisfaction of Engineer-in-charge upto all lead and lift.

Applying wood presernative over new wood and wood based surface after and I/c preparing the surface by thoroughly cleaning oil, grease,dirt and other foreign matter with ready mixed paint other than white as per direction and to the entire satisfaction of Engineer-in-charge upto all lead and lift.

Painting two coat (excluding Priming coat )on new wood and wood based surface with ready mixed paint brushing to give an even shade I/c cleaning of all dirt dust and other foreign matter, sand papering and stopping with while enamel paint as per direction and to the entire satisfaciton of Engineer-in-charge upto all lead and lifts.

PROVIDING & FIXING BRIGHT FINISHED STAINLESS STEEL BELOW MENTIONED FITTING INCUDING BOLTS & NUTS &SCREWS ETC. COMPLETE. Sliding Door bolt with nut screws etc. complete 200*16 mm