Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹80,000Accepted-Finance HOUSING COLONY UDHAMPUR | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L1 | Accepted-Finance lowest for item 2 | |
| 2 | L1₹1.0 LAccepted-Finance BHAGWATI NAGAR JAMMU | L1 | Accepted-Finance lowest for item 1 | |
| 3 | L2₹1.9 LRejected-Finance GOLE GUJRAL JAMMU JAMMU | L2 | Rejected-Finance not lowest |
| Sl No | Description | Qty | Unit | PERFECT ELECTRICAL WORKS L2 | M.S J K HYDRAULIC ENGGG AND FABRICATOR WORKS L1 | M/S GOPAL ELECTRICAL L3 |
|---|---|---|---|---|---|---|
| 1.00Restoration of flood hit pumping machinery by repair/servicing/rewinding of motors, 250 KVA Voltage stabilizer, foot valves along with allied electro-mechanical works at LIS Pindi Sarochana New | ||||||
| 1.01 | Restoration of flood hit pumping station LIS Pindi Sarochana New by way of cleaning of mud/silt from the pump room by engaging manual labour. Cleaning of all the electro-mechanical equipment's i.e. pumps, motors, starters and pump room from mud and silt. Disposing off all the silt/mud/debris away from LIS at an appropriate nearby place with head load.
Servicing/repairs to 3No.s choked foot valves 150mm (2No.s) and 200mm dia.of LIS by way of dismantling of foot valves along with choked suction pipes and cleaning of mud/silt from pipes foot valves using special tools and tackles. Complete dismantling of foot valves and then providing/fitting of new leather washers cut to size, adjustment of flaps with repairs to hinges if required. Reassembling the foot valves along with suction pipes by providing/fitting of new R.I sheets and nuts, bolts etc. Complete job includes cost of material used, transportation charges and labour charges for skilled /semiskilled labour to be employed at site for execution of job including the outstation charges etc. Providing of grease, m–oil and gland packing in pumps of 2 No. pumps by replacing theold one.Complete job
Reconditioning of voltage stabilizer by disconnecting all the electrical connections of the 250 KVA voltage stabilizer installed at LISPindi Sarochana New both on transformer side and electrical motor side by way ofremoving old rusted thimbles along with nuts and bolts. Repair of 250 KVA manually operated voltage stabilizer by way of dismantling it atsite by removing its top cover for extraction of coils from the casing sumpwith the help of chain pulley block, tripod stand and manual labour. Finding the fault and checking for proper insulation and continuity. Drying of the coil, lowering of the coils inside the casing. Heating of the T-Oil to make it moisture free in stabilizer by draining out from the tank to makeit moisture free, filling of deficit quantity of T-Oil approx. 100 litre in the stabilizer. Lowering of the coils inside the casing. Making the electrical connections of by wayof providing new thimbles of appropriate rating/ size along with newnuts/bolts and testing of the 250 KVA voltage stabilizer on full load at site.
Complete job includes cost of material, labour charges, installation and testing with hire charges of tools and tackles at LIS Pindi Sarochana New. | 1 | Job | 1,00,500 ₹1,00,500 Lowest | 1,05,000 ₹1,05,000 | 1,05,000 ₹1,05,000 |
| 1.02 | Rebate on Old Parts | 1 | Job | -3,015 ₹-3,015 | -3,150 ₹-3,150 | -2,100 ₹-2,100 |
| 2.00Restoration of flood hit pumping machinery by repair/servicing/rewinding of motors, 250 KVA Voltage stabilizer, foot valves along with allied electro-mechanical works at LIS Pindi Sarochana New | ||||||
| 2.01 | Restoration of flood hit pumping station LIS Pindi Sarochana New by way of disconnecting the cables of 2no. 40HP motors and 1No. 30 HP motor from starters and then dismantling with the help of tools & tackles/manual labour from base frame and HC pumps position and then shifting the same through manual head load and then 1oading with the help of manual labour/chain pulley block in mechanical transport for further shifting tothe workshop, Unloading at the workshop for repairs, reconditioning, rewinding of the motors. Dismantling of all the above mentioned motors at workshop and then extraction of rotors from stators and complete rewinding of the 3no. motors with new copper wires of requisite gauge and specifications of standard make. Providing/fitting of new insulation, packing material, then varnishing with superior quality varnish drying in oven in controlled temperature. Extraction of bearings from their housings and cleaning by removing silt/dirt from bearing housing, providing/fitting of 2No. bearings to the each motors at D.E and NDE as per samples. Refitting bearings in housings, greasing properly. Back carriage to site after repairs and reinstallation by making connections of motor and testing on idle and load conditions. Also repair/rewinding to 2 HP motor of priming pump by way of complete rewinding with new copper wires of requisite gauge and specifications of standard make. Providing fitting of new insulation. packing material then varnishing with superior quality varnish & drying in oven in controlled temperature. Job includes cost of material, rebate to be quoted on old copper scrap and labour charges with hiring charges of tools & tackles.
Servicing/reconditioning/repair of 1no. of FASD starters 50HP of LIS Pindi Sarochana New by complete dismantling of all the parts of starters and then cleaning all the parts with recommended chemicals. Cleaning/servicing of all the contactors and relays with suitable chemicals. Providing/fitting of new parts i.e. timer assembly, contactors and relays required after proper checking for smooth operation, making of all the electric connections by providing/fitting of new nuts, bolts and washers.
Complete job includes cost of material used, transportation charges and labour charges for skilled /semi-skilled labour to be employed at site for execution of job including the out station charges etc | 1 | Job | 85,500 ₹85,500 | 80,000 ₹80,000 Lowest | 93,000 ₹93,000 |
| 2.02 | Rebate on Old Parts | 1 | Job | -2,565 ₹-2,565 | -2,400 ₹-2,400 | -1,860 ₹-1,860 |
Tender Value
₹2.5 L
EMD Value
₹4,960
Closing Date
17 Sept 2025, 2:00 pmClosed
XEN MID JAMMU
MID JAMMU
Restoration of flood hit pumping machinery by repair/servicing/rewinding of motors, 250 KVA Voltage stabilizer, foot valves along with allied electro-mechanical works at LIS Pindi Sarochana New
2025_IFC_287925_1
MID/J/e-NIT/2025-26/75
Open Tender
Repair and Maintenance Works
Item Wise
10 days
Pindi Sarochana New
as per tender notice, boq
8 documents required · 8 mandatory
₹200
Executive Engineer MID JAMMU
₹4,960
13 Oct 2025
11 Sept 2025
18 Sept 2025
11 Sept 2025
17 Sept 2025
11 Sept 2025
Restoration of flood hit pumping machinery by repair/servicing/rewinding of motors, 250 KVA Voltage stabilizer, foot valves along with allied electro-mechanical works at LIS Pindi Sarochana New
Restoration of flood hit pumping station LIS Pindi Sarochana New by way of cleaning of mud/silt from the pump room by engaging manual labour. Cleaning of all the electro-mechanical equipment's i.e. pumps, motors, starters and pump room from mud and silt. Disposing off all the silt/mud/debris away from LIS at an appropriate nearby place with head load. Servicing/repairs to 3No.s choked foot valves 150mm (2No.s) and 200mm dia.of LIS by way of dismantling of foot valves along with choked suction pipes and cleaning of mud/silt from pipes foot valves using special tools and tackles. Complete dismantling of foot valves and then providing/fitting of new leather washers cut to size, adjustment of flaps with repairs to hinges if required. Reassembling the foot valves along with suction pipes by providing/fitting of new R.I sheets and nuts, bolts etc. Complete job includes cost of material used, transportation charges and labour charges for skilled /semiskilled labour to be employed at site for execution of job including the outstation charges etc. Providing of grease, m–oil and gland packing in pumps of 2 No. pumps by replacing theold one.Complete job Reconditioning of voltage stabilizer by disconnecting all the electrical connections of the 250 KVA voltage stabilizer installed at LISPindi Sarochana New both on transformer side and electrical motor side by way ofremoving old rusted thimbles along with nuts and bolts. Repair of 250 KVA manually operated voltage stabilizer by way of dismantling it atsite by removing its top cover for extraction of coils from the casing sumpwith the help of chain pulley block, tripod stand and manual labour. Finding the fault and checking for proper insulation and continuity. Drying of the coil, lowering of the coils inside the casing. Heating of the T-Oil to make it moisture free in stabilizer by draining out from the tank to makeit moisture free, filling of deficit quantity of T-Oil approx. 100 litre in the stabilizer. Lowering of the coils inside the casing. Making the electrical connections of by wayof providing new thimbles of appropriate rating/ size along with newnuts/bolts and testing of the 250 KVA voltage stabilizer on full load at site. Complete job includes cost of material, labour charges, installation and testing with hire charges of tools and tackles at LIS Pindi Sarochana New.
Rebate on Old Parts
Restoration of flood hit pumping machinery by repair/servicing/rewinding of motors, 250 KVA Voltage stabilizer, foot valves along with allied electro-mechanical works at LIS Pindi Sarochana New
Restoration of flood hit pumping station LIS Pindi Sarochana New by way of disconnecting the cables of 2no. 40HP motors and 1No. 30 HP motor from starters and then dismantling with the help of tools & tackles/manual labour from base frame and HC pumps position and then shifting the same through manual head load and then 1oading with the help of manual labour/chain pulley block in mechanical transport for further shifting tothe workshop, Unloading at the workshop for repairs, reconditioning, rewinding of the motors. Dismantling of all the above mentioned motors at workshop and then extraction of rotors from stators and complete rewinding of the 3no. motors with new copper wires of requisite gauge and specifications of standard make. Providing/fitting of new insulation, packing material, then varnishing with superior quality varnish drying in oven in controlled temperature. Extraction of bearings from their housings and cleaning by removing silt/dirt from bearing housing, providing/fitting of 2No. bearings to the each motors at D.E and NDE as per samples. Refitting bearings in housings, greasing properly. Back carriage to site after repairs and reinstallation by making connections of motor and testing on idle and load conditions. Also repair/rewinding to 2 HP motor of priming pump by way of complete rewinding with new copper wires of requisite gauge and specifications of standard make. Providing fitting of new insulation. packing material then varnishing with superior quality varnish & drying in oven in controlled temperature. Job includes cost of material, rebate to be quoted on old copper scrap and labour charges with hiring charges of tools & tackles. Servicing/reconditioning/repair of 1no. of FASD starters 50HP of LIS Pindi Sarochana New by complete dismantling of all the parts of starters and then cleaning all the parts with recommended chemicals. Cleaning/servicing of all the contactors and relays with suitable chemicals. Providing/fitting of new parts i.e. timer assembly, contactors and relays required after proper checking for smooth operation, making of all the electric connections by providing/fitting of new nuts, bolts and washers. Complete job includes cost of material used, transportation charges and labour charges for skilled /semi-skilled labour to be employed at site for execution of job including the out station charges etc
Rebate on Old Parts
PERFECT ELECTRICAL WORKS (BID ID -2517973)
M/S GOPAL ELECTRICAL (BID ID -2519278)
M.S J K HYDRAULIC ENGGG AND FABRICATOR WORKS
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .