REPAIRS TO JOINERIES, TILING, WALL PANELLING FALSE CEILING, SUNKEN FLOORING, PLUMBING FITTINGS, SANITARY FITTING AND MISC ITEMS FOR MD ACCN AND OTM ACCN AND REPAIRS TO ROAD AT NMRL AMBERNATH

Amount

Taking down Chowkats or frames not exceeding 1.5 Sq.M each (Without taking off shutters from the frames). complete all as specified and directed

Taking down Chowkats or frames exc 1.5 Sqm but not exceeding 4 Sq.M each (Without taking off shutters from the frames) complete all as specified and directed.

Taking down shutters of any description not exceeding 1 Sq. M each complete all as specified and directed.

Taking down shutters of any description exceeding 1 Square Metre but not exceeding 2 Square Metre each complete all as specified and directed.

Supply and Fix 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed

Supply and Fix Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and naturalfibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed

Supply and Fix 2nd class hard wood, 30 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed.

Supply and Fix Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

Supply and Fix for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

Supply and Fix Second Class hard wood clean sawn plain, solid, straight frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints as chowkhat complete all as specified and directed.

Providing and fixing frame size of 100 X50 mm factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threadedstar headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed by Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately).

Supply and Fix MS work as in hold fast etc confirming (Fe-410-0 or Fe-310-0) complete all as specified and directed.

Material and Labour for PCC (1:3:6) Type C1(using 20 mm graded stone aggregates) as in PCC Bed blocks in finished all exposed surfaces of concrete including necessary form work complete all as specified and directed.

Supply and Fix Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including wooden beading complete all as specified and directed.

Supply and Fix in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including wooden beading in repairs complete all as specified and directed.

Supply and Fix sheet glass ordinary quality 4 mm thick in squares n. exc. 0.50 sqm in each pane and glazing with oil putty after hacking out old broken glass panes complete all as specified and directed.

All as per item no 16 above but size of glass pane exc. 0.50 sqm complete all as specified and directed.

Supply and Fix Figured glass, pin headed 4 mm thick in squares n. exc. 0.50 sqm in each pane and glazing with oil putty after hacking out old broken glass panes complete all as specified and directed.

Supply and Fix 100mm size Stainless steel butt hinges, fixed with stainless steel hinge pin complete as specified and directed.

Supply and Fix MS Butt hinges medium weight cold rolled & fixed 100mm long complete all as specified and directed.

Supply and Fix Aluminium anodized barrel tower bolts of extruded section 200mm complete all as specified and directed.

Supply and Fix Aluminium anodized barrel tower bolts of extruded section 100mm complete all as specified and directed.

Supply and Fix Aluminium anodized handles cast type 150mm long complete all as specified and directed.

Supply and Fix Aluminium anodized handles cast type 100mm long complete all as specified and directed.

Supply and Fix Aluminium alloy anodized sliding door bolt with hasp and staple of size 300mm long complete all as specified and directed.

Supply and Fix in repairs MS Butt hinges medium weight cold rolled & fixed 100mm long complete all as specified and directed.

Supply and Fix in repairs Aluminium anodized barrel tower bolts of extruded section 200mm complete all as specified and directed.

Supply and Fix in repairs Aluminium anodized barrel tower bolts of extruded section 150mm complete all as specified and directed.

Supply and Fix in repairs Aluminium anodized barrel tower bolts of extruded section 100mm complete all as specified and directed.

Supply and Fix in repairs Aluminium anodized handles cast type 150mm long complete all as specified and directed.

Supply and Fix in repairs Aluminium anodized handles cast type 100mm long complete all as specified and directed

Supply and Fix in repairs Aluminium alloy anodized sliding door bolt with hasp and staple of size 300mm long complete all as specified and directed.

Supply and Fix in repairs 75mm Hasp and staple type, alluminium anodised including bolt to hinge plate and fxed with screws in repairs complete as specified and as directed.

Supply and Fix in repairs 150 mm floor door stopper of aluminium alloy body and tongue,anodised,with hard drawn steel spring ,fixed in floor. complete all as specified and directed.

Supply and Fix Fancy type decorative stainless steel drapery rod 20 mm dia including side caps and 'F 'and' L' brackets fixed to wall with screws complete as specified and as directed.

Supply and Fix in repair Continuous (Piano) hinges SS, bright finish width of flaps 40mm complete as specified and as directed.

Supply and Fix in repair door closer hydraulically regulated, aluminium body designation No 3, universal type, suitable for door shutter of 851 to 1000 mm in width complete all as specified and directed.

Supply and Fix in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stailess steel cover, governing pivot made of brass, other parts made of mild steel heavy duty fixed complete all as specified and directed.

Repair only aluminium door shutter by taking down shutter any size from frame, opening out joints after taking down glass or particle board, replacing the corner piece & defective members jointing again refixing the glass pane/particle board including rubber gasket etc complete all as specified and directed Note : Aluminium Seactions for replacement shall be measured & paid seperately as supply only.

Taking down old unserviceable steel rolling shutter complete all as specified and directed.

Supply and Fix Steel rolling shutters, thickness of laths 1.00 mm with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: gear operated type with chain wheel and hand chain complete all as specified and directed.

Repair to existing steel rolling shutters by complete removal and refixing without ball bearing, spring as specified including top cover, anchoring rod, hasp and staple; erected in position as indicated/, complete: push pull or manual type and reweilding, rops, stoppers, oiling, greasing, easing etc including necessary replacement of profile, if required grid channel complete all as specified and directed by Engr-in-Charge (Note: Spare parts required shall be measured and paid seprately)

Supply only ball bearing for rolling shutter with necessary replacement of profile complete all as specified and as directed by Engr-in-Charge

Supply only spring for rolling shutter with necessary replacement of profile complete all as specified and as directed by Engr-in-Charge

Dismantling of boarding including frame work, any description, fixed in any position with nails complete all as specified and directed.

Providing and fixing frame size of 45 X85 mm factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threadedstar headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately).

Providing and fixing 18mm thick factory made single extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.

Providing and fixing 6mm thick factory made single extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed.

Supply and Fix SS hinges with soft close suitable for cabinets complete as specified and directed.

Supply and Fix Gunmetal handle complete as specified and as directed.

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete all as specified and directed by Engineer-in-Chief.

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and directed.

Supply and Fix sheet glass ordinary quality 5.5 mm thick in squares exc. 0.50 sqm in each pane and glazing with oil putty complete all as specified and directed.

Material and Labour two coats of synthetic enamel paint over a coat of pink primer to new wooden surface including preparation of new surface. complete all as specified and directed.

Material and Labour for two coats of synthetic enamel paint over a coat of red oxide, zinc chrome new or previously untreated steel surfaces of any description, over 10 cm in width or girth,not other wise described. complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

Supply and fixing of PVC False ceiling consisting of 600mmX600mm X5mm Prelam embossed PVC sheet of Density 600kg/Cbm Manufractured by an ISO-9001-2015 certified company,used as panel insert in a frame workmade using powder coated aluminum T-section of size 1" X1"(25X25mm,19 guage or 1mm thick) in square pattern of grid sizes of 2' X2' (600mm X600mm).The aluminum frame work is supported from the ceiling with the help of 'J' hook and G.I wire/6mm M .S.roads of required sizes to maintain proper level etc.The aluminum framework is supported on side wall with the use of aluminum L-Section of size 1" X1" (25mm X2mm ) angle etc.complete all as per manufacturers instruction complete all as specified and directed by Engg-in Charge.

Supply and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed.

Supply and Fix Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.

Supply and fixing of Louvers Prelam PVC Wall Panelling of Rigid Upvc foam profiles with integral skin of size 203x30x4.5mm of density 1000kg/cbm. Manufractured by an ISO-9001-2015 certified company, having tuunge & grove design with interlocking facility will be fixed in perpendicular direction at hte face of wall using 8x38mm steel screw at every 450mm centre to centre covering if required to avoid leakage through joints, th profiles are to be jointed and finished so as to ahve a flush look which includes filling & finishing with jointing compound provided between brick wall & wall lining manufacturers instruction complete all as specified and directed by Engg-in Charge.

Material and Labour Nonskid coloured ceramic tiles 7mm to 8mm thick area of each tiles exeeding 0.06 sqm but not exceeding 0.11 sqm in floors etc. set and jointed neat cemet slury and pointed in coloured cement to match complete all as specified and directed. (Notes : Screed bed measured and paid separately)

Material and Labour Nonskid coloured ceramic tiles 7mm to 8mm thick area of each tiles exeeding 0.18 sqm but not exceeding 0.38 sqm in floors etc. set and jointed neat cemet slury and pointed in coloured cement to match complete all as specified and directed. (Notes : Screed bed measured and paid separately)

Material and labour for coloured light shade vitrified tiles 9mm to 10mm thick (square/rectangular polished area of each tiles not exceeding 0.36sqm in flooring set and jointed in neat cement slurry and pointed in coloured cement to match, on flooring, complete all as specified and directed. (Screed bed measured and paid separately)

Material and Labour Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:4 complete all as specified and directed.

Material and Labour PCC (1:2:4) type B0 using 12.5 mm graded stone aggregate 25 mm thick as in sub base for floors complete all as specified and directed.

Material and Labour Glazed ceramic coloured tiles (450x300) x 7mm thick on vertical surfaces such as skirting, dados and risers to steps etc. set and jointed neat cemet slury and pointed in coloured cement to match the colouring tile complete all as specified and directed. (Backing coat measured and paid separately)

Material and Labour Virified Ceramic tiles, light shade 9 to 10 mm thick (square/ rectangular) polished, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. (Backing coat measured and paid separately)

Material and Labour for 10 mm thick, rendering in cement mortar 1:3 for fixing tiles on vertical surfaces such as skirting, dado, etc complete all as specified and as directed.

Dismanting of floor hearth or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Material and Labour for Granite work with 20mm thick granite slabs (any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking plateforms and like in cemen mortor (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. Including 20mm thick screed bed or bedding lay in CM 1:4. complete all as specified and directed.

Material and Labour for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slbab including rubbing and polishing completed Including 20mm thick screed bed or bedding lay in CM 1:4 complete all as specified and directed.

Material and labour for PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) 40 mm thick as in floors etc with broom finish without using extra cement complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings etc not exc 15 cm thick above or below ground level complete all as specified and directed.

Material and Labour for providing and laying water proofing treatment to sunken floor portion of WC ,Bathroom etc,by applying first layer of slurry of cement @0.488 kg/Sqm mixed with Dr fixit or Equivalent Acrylic based polymer modified cementitious (PMC) composite [email protected]/sqm and second layer of slurry of cement 0.242 kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @0.126kg /sqm complete all as specified and directed.

Material and Labour for 20mm thick rendering in CM 1:4 mixed with liquid water proofing compound on floor surface complete all as spcified and directed.

Supply only integral water proofing compound complete all as specified and directed.

Material and Labour for Plain cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundations, filling and mass concrete all as spcified and directed.

Taking down or up 20mm dia steel tubing galvanised along with fittings or any other type of pipe and removing to store or cleaning for refixing. complete all as specified and directed.

Taking down or up 25 or 32 mm dia steel tubing galvanised along with fittings or any other type of pipe and removing to store or cleaning for refixing. complete all as specified and directed.

Taking down or up 15 mm dia steel tubing galvanised along with fittings or any other type of pipe and removing to store or cleaning for refixing. complete all as specified and directed.

Supply and Fix 16mm outer dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings fixed to walls and ceiling or laid in floors complete all as specified and directed.

Supply and Fix 20mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings fixed to walls and ceiling or laid in floors complete all as specified and directed.

Supply and Fix 25mm dia Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Supply and Fix 32 mm dia Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Repairs to leaking in bib tap, pillar tap, stop cock, Angle valve, float valve and low level flushing cistern etc of any description by changing the washer etc complete all as specified and directed.

Supply and Fix in repairs PVC connection 15mm dia 45cm long with 2 Nos PTMT checknuts with washer complete all as specified and directed.

Supply and Fix in repairs waste fittings brass chromium plated 32mm dia for wash hand basin complete all as specified and directed.

All as per Srl Item No 87 above but 40mm dia for stainless steel sink complete all as specified and directed.

Supply and Fix in repairs 32mm dia flexible P.V.C. waste pipe for wash basin complete all as specified and directed.

All as per Srl Item No 89 above but 40mm dia for sink complete all as specified and directed.

Supply and Fix in repairs 15mm dia bib tap cast copper alloy but fancy type chromium plated long body complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair 15mm dia brass chromium plated pillar tap fancy type with fly nut capstan head screwed for 15mm dia pipe complete all as specified and directed.

Supply and Fix in repairs Wall mixer 3 in 1 system with provision for over head shower complete with 115 mm long bend pipe, connection legs & wall glange (without overhead shower) Make : Prayag Cat No- 6875 or Equivalent complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair single lever Basin Mixer without popup waste systems Make : Prayag Cat No-6851 or Equvalent complete all as specified and directed by Engr-in-Charge

Supply and Fix in repair bibtap sink cock regularsput with flange Make : Prayag Cat No-6816 or Equvalent complete all as specified and directed by Engr-in-Charge

Supply and Fix in repairs 2 way angle cock with flage Make : Prayag Cat No-6811 or Equvalent complete all as specified and directed by Engr-in-Charge

Supply and Fix in repairs 2 way bib cock with flage Make : Prayag Cat No-6812 or Equvalent complete all as specified and directed by Engr-in-Charge

Supply and Fix in repair 15mm bore stop valves fancy type, cast copper alloy, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union with long shank and cup(concealed type) complete all as specified and as directed.

Supply and Fix in repairs 15mm bore stop valves, fancy type, cast copper alloy, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and directed.

Supply and Fix in repair White vitreous china laboratory sink size 600x450x200mm with plugs, washers and wastes; including beding in cement mortar on to dwarf walls, or including fixing cantilever brackets and connecting union to waste pipe; upto 0.5 sqm each complete all as specified and directed Make : Cera Cat part No. S6010102 or equivalent

Supply and Fix in repairs 10 ltrs capacity PVC low level flushing cistern complete with syphone handled level PVC bend inclduing connecting to WC and fixing on walls with bracket complete all as specified and directed.

Supply and Fix in repairs flush pipe PVC for low level flushing cistern including jointing to WC complete all as specified and directed.

Supply and Fix in repairs PVC syphone with handle complete for low level flushing cistern complete all as specified and directed.

Supply and Fix in repairs wash basins, vitreous china of size 550 x 400 including cutting for and pinning in ends of brackets or erecting stand, inclusive of fixing of supply and waste pipe 32 mm bore, bottle trap, 15 mm bore pillar tap, 450 mm long PVC connections with PTMT unions, etc complete all as specified and as directed.

Supply and Fix in repair vitreous chinaware wash down water closet pan padestal pattern white excluding fixing bolts but including jointing to flushing cistern and flush pipe antisyphonage pipe etc complete all as specified and directed

Supply and Fix in repairs plastic water closet seat cover white closed pattern with flat bottom end cover and mild steel chromium plated hanging device complete all as specified and directed.

Supply and Fix in repair Vitreous China urinals, bowl type(back or corner wall type),complete including providing and fixing plugs,bedding urinal against wall in Cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws,pointing around urinal back in cement; fixing automatic flushing cistern with brackets,flush pipe,grating and Union for discharge pipe. complete all as specified and directed.

Supply and Fix in repairs vitreous china Urinal, Half stall type white (excludign flushing cistern, flush pipe and waste pipe) including connections to flushing pipe and outgoing pipes fixed and repair complete all as specified and directed.

Supply and Fix in repairs CP grating 125 mm dia round fix on floor / nahani trap fixed with cement morter complete all as specified and directed. (Make : As per sample)

Material and Labour for 75 mm dia PVC (SWR) floor trap, plain with chromium plated grating including jointing with solvent cement complete all as specified and directed.

Supply and Fix in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position in all respect complete all as specified and directed.

Supply and Fix in repair Stainless steel sink, 1.00mm thick for kitchen or laboratory with plug waste pipe, washers including cantilever cast iron brackets connecting union etc. overall size 585mm x 485mm with bowl size 535mm x 432mm x 200mm complete all as specified and directed.

Supply and Fix in repair Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed.

Supply and Fix in repairs chromium plated brass shower rose 125mm dia with swivel joint complete all as specified and directed.

Taking down water tanks existing PVC exc 250 but not exc 500 ltrs capacity complete all as specified and directed.

All as per Srl Item No 116 above but exc 500 ltrs but not exc 1000 ltr capacity complete all as specified and directed.

Supply and Fix in rotational moulded polythene water storage tank (Cylindrical vertical with closed top ) hoisted and fixed in position 500 ltrs capacity including disonnecting and refixing the GI pipe and fittings complete all as specified and directed.

All as per Srl Item No 118 above but capacity of tank 1000 ltrs. complete all as specified and directed.

Supply and Fix in repairs 20 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

All as per Srl item No 120 above but 25 mm dia complete all as specified and directed.

Supply and Fix in repair 20 mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

All as per Srl item No 122 above but 25 mm dia complete all as specified and directed.

Repair to pot holes not exc 1 Sqm each including sweeping free from dust and mud or water, scoring sunken in roads, paths etc cutting around edges to at least 25mm in depth, making good by applying tack coat using paving bitumen (VG-10 Grade) @ 5 kg/10 Sqm putting in pre-mixed bituminous macadam, well rammed sealed with binder with paving bitumen grade VG -30 9.80 Kg per 10 Sqm blinded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadum binder and chipps) and depth of pot holes exc 30mm complete all as specified and directed by Engineer -in-Charge.

Preparing surfaces by brushing with wire brushes for removing caked mud etc. Sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and directed.

Applying evenly a priming/tack coat with bituminous primer at 5 kg per 10 sq metre complete all as specified and directed.

Material and labour for premixed semi dense asphaltic concrete 30mm thick consolidated thickness, using combined graded aggregate i.e. crushed stone coarse aggregate, fine aggregate (sand) & filler (inherent filler/OPC 43 grade cement) of physical properties as specified and as per table given (to refer SSR Part-I of 2020), pre-heated mixed with 5.5% binder content by weight of total mix using VG-30 grade bitumen, laid with mechanical paver, rolled & compacted to a uniform smooth surface with 8 to 10 tonne power road roller, complete all as specified and directed. Notes:- (i) Thickness of semi dense asphaltic concrete and quantities of materials as mentioned in particular specifications/SSR are the minimum. The quoted rate shall also be deemed to include for provision of more materials in comparison to those mentioned/specified in the item, if required, to achieve the required level, gradient, camber and shape all as directed by the GE. (ii) Hot mix plant of adequate capacity shall be used for heating and mixing stone and fine aggregate and binder (bitumen) and semi dense asphaltic concrete shall be laid in single layer with self propelled mechanical paver all as directed by the GE. (iii) Contractor’s quoted rates shall be deemed to include all these aspects..

Material and labour for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.

Supply and fixing cat eyes solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed.

Shree Ayyappa Engineering

devan enterprises