Providing Water Supply Scheme Village Akalgarh Dhapaian and Jiwan Bhander Block Tarsika Distt Amritsar Under NABARD XXIII/JJM

Amount

Boring with casing pipe for tube well in all soils except ordinary hard rocks requiring blasting including removing the casing pipe after the tube well is lowered & tested, equipment as required such as hand boring machine and its accessory,transportation to site and vice versa etc. complete in all respect.

(b) Boring with 300mm I/d Housing Pipe 0 to 150m

Supplying, lowering of MS Pipe as per IS: 4270-2001 including MS sockets having dimensions as per IS code duly welded with MS electrode to have extra strength to lower the pipe into tubewell bore.

250 mm nominal diameter (weight 52.3 kg per meter) 8mm thickness

150 mm nominal diameter (weight 21.6 kg per meter) 5.4mm thickness

Supplying & fixing MS taper/reducer made out of 6mm thick m.s sheet complete in all respects reducer size 250x150 mm

Supplying, lowering of Stainless Steel Cage type wire wound screen as per IS: 8110-2000 or latest ISI Marked, Duly welded with suitable grade S.S welding electrode to lower the strainer into tube well bore.

150mm internal diameter (slot size 0.15mm) 6.30 mm thickness

Supplying, Lowering & fixing of M.S. special socket to connect S.S. Strainer to M.S. Pipe duly welded with suitable grade welding electrode complete in all respect.

(b) 150mm internal diameter

Supplying, Lowering & fixing of stainless steel socket as per IS 8110-2000 or latest ISI marked duly welded with suitable grade SS welding electrode to lower the strainer into T/Well bore complete in all respect

(b) 150 mm internal diameter

Supplying at site Wooden box of suitable size with Lid & locking arrangment for preserving strata sample collected from the bore.

Collection of water sample from different strata and testing of sample from approved laboratory (Physical & chemical Analysis)

Supplying and fixing M.S well cap having thread to fix on housing pipe complete in all respect.

250 mm internal diameter

Supplying & fixing of bail plug of M.S. pipe complete with inverted U-hook attached to the bottom plug complete in all respect.

(b) 150mm internal diameter (weight 21.6 kg per meter) 5.40 mm thickness

Supplying & fixing of M.S. Clamp of size 150mm x 12mm made out of MS Flat 1.52 m long, suitable to fit Housing pipe including the cost Nut & Bolts of Suitable size complete in all respect.

Development of stabilizing of the tube well with air compressor of required capacity as directed by the engineer-in-charge including cost of tools, appliances & consumable to the satisfaction of Engineer-in-charge.

Capacity of Air compressor 330 cfm at 250 PSI

Development of stabilizing of the tube well with air compressor of required capacity as directed by the engineer-in-charge including cost of tools, appliances & consumable to the satisfaction of Engineer-in-charge.

Testing of water sample for Heavy metal from approved laboratory (Toxic material such as Arsenic, lead, mercury, pesticide etc.)

Repair Analysis of 75 KL Existing OHSR

Supplying,fixing and testing at site Automatic electronic type water level indication system with gun metal float sensor and electrical cable suitable for three phase pump submersible / monoblock to be fixed on existing panel for OHSRs complete in all respects

Repair of OHSR Ventilator Complete in all respects

Providing & fixing 20mm dia OHSR hand railing G.I pipe Complete in all respects

Earth work in excavation in foundations, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation

Cement concrete 1:8:16 with 40 mm gauge stone aggregate to be used instead of brick ballast. mixing by mechanical means using concrete mixer volumetric type

First class Burnt Brick work laid in cement sand mortar 1:5 in foundation and plinth

12.5mm Thick cement plaster 1:4

Earth Filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from foundation and taken only from outside the building plinth in 15 cum layers including ramming, watering and consolidating upto 30 meters.

Stone (building or pitching) Sand, Earth, Fly Ash, Bajri, Shingle, Spalls, Brick bats, Brick ballast and Stone metal for loading into wagon, trucks or boats within 15 Metres lead

Conglomerate floor 40mm cement concrete topping 1:2:4

Finishing wall with exterior decorative cement based paint such as snowcem robbiacem etc. on new work in two coats to give even shade.

Rising Main

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. (Mechnically) (10kgf/sqcm) (excavation & including specials)

110mm o/d pipe of 10 Kgf/sqcm

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer - in – charge)

Providing, Fixing & jointing Cast Iron Surface box for Sluice Valve, Air Valve, Fire hydrant etc. including all carriages complete @ 3Kg Each (3x2kg = 6kg)

Construction of masonry sluice valve chamber excluding Sluice valve cover as per standard design & drawings of public health department (2 no. each of size 0.9m x 0.9m

Distribution System

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. (Manually) (6kgf/cm2) (excavation & including specials)

PVC pipe 63mm o/d

PVC pipe 90mm o/d

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. (Mechnically) (6kgf/cm2) (excavation & including specials)

PVC pipe 63mm o/d

PVC pipe 90mm o/d

PVC pipe 110mm o/d

PVC pipe 160mm o/d

Providing and laying, jointing, fixing, testing ISI marked G.I. Pipe (as per IS 1239) B- Class, premium make such as (Jindal, Hissar) including cost of specials such as tees, bends, sockets elbow, cutting threading and testing in trenches in the ground complete.

G.I. pipe 50mm i/d

G.I. pipe 80mm i/d

Dismantling brick or flagged stone flooring without concrete base and relaying of dry brick on edge paving with a dismantled bricks including sand grouting.

PVC pipe 63mm o/d

PVC pipe 90mm o/d

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer - in – charge) Class PN-1 as per ISI

P/F & Jointing and ISI Marked gun-metal peet valve (heavy pattern) as per IS-778 with hand wheels on G.I. Pipe lines laid in the ground or inside building including all carriage complete.

50 mm i/d Gun metal peet valve (heavy duty)

Providing, Fixing & jointing Cast Iron Surface box for Sluice Valve, Air Valve, Fire hydrant etc. including all carriages complete No. with Each 3kg i.e (5 x 3 = 15 kg)

Construction of masonry sluice valve chamber excluding Sluice valve cover as per standard design & drawings of public health department. (Size 0.6m x 0.6m).

Construction of masonry sluice valve chamber excluding Sluice valve cover as per standard design & drawings of public health department. (Size 0.9m x 0.9m).

Bailing out water from the trenches for making new connections in existing pipelines including cleaning trimming and dressing the trenches to correct alignment and grade as required by the Engineer-in-charge.

Providing proposed water connection to house hold up to wall with providing, laying jointing, testing MDPE pipe lines 15mm i/d=4.50 mtr, including cost of specials such as tees, bends, sockets, elbow etc. cutting, threading, and testing in trenches in the ground and ISI marked 15mm i/d GM ferrule as per IS: 2692 and 3" i/d clamp with c.i bib cock 15mm i/d as per IS:210 with stainless steel spindle.

Providing, Installing, testing & commissioning one No. Electronically actuated, Diaphragm Operated, Metering System, Chemical Dosing Chlorinator, suitable for delivering 0.5 to 6 Litres of Bleaching Powder solution/ Sodium Hypo solution per hour under maximum delivery pressure upto 7 Kg.cm2, and suction lift not less than 1.5 m, as per DWSS standard specifications.

Repair of Pump Chamber

Supply & fixing of pressed steel frames (chowkats) consisting of 18 gauge (1.25mm thick steel sheet of the specified section (standard design latest) including iron lugs (hold fasts) for iron hings conforming to PWD specification including bolts for fixing stops lock, notch bolts, hydraulic spring and finished with one priming coat of approved quality fixed in position including cost of cement concrete 1:3:6 for filling in the frame and cement concrete for 1:2:4 for lugs complete.

Door and windows frame of size 118mm x 60mm with 40mm wide single rebate weighing 3.43 kg per meter.

Wrought Iron and mild steel ladders, framed grills, grating etc. with ends of bars, riveted or welded or forged, framed window guards, barred iron doors, stair case, iron railing including cost of bolts & nuts or screws or welding rod, complete fixed in position.

Hollock wood doors shutter windows including Hinges, Screws, Chocks Cleats, Stops and Cords etc. complete fixed in position (double Leaf) @ Paneled glazed or glazed and paneled i) 40mm thick Door & Windows.

Applying Pink Primer or-aluminium priming coat including preparation of surface With special quality paint ( Door, Ventilator, Windows, Cup board)

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.

White washing 3 coats inside of pump chamber, (Pump Chamber, Cub Board, Outside Window, Door Portion)

Finishing walls with cement based water soluble exterior paint such as snowecem, robbiacem etc. on old work one coat to give an even shade. (PC Wall outside, Front Window, Pillar Portion above parapet, Sides of Door,Parapet walls plaster Sides, Parapet Walls plaster top

Supplying & fixing glass panes including special metal sash putty of approved make. (Ventilator,Windows)

Providing and fixing of Glass strips 4mm thick in floors

50mm wide

40mm wide

Conglomerate floor 50mm thick cement concrete rate 1:2:4 on 100mm thick cement concrete 1:8:16 and 100mm sand filling. ( Pump Chamber, Door Portion, Front window, Cub Board Portion, Panel Board)

Cement Cencrete 1:2:4 gola 10cm×10cm concave quardrant along junction of roof with parapet wall finished smooth where specially specified.

Minor repair of pump chamber like plaster scraping, prepare surface, relaying plaster, chajja repairs, prepare roof suface for grouting, cement grouting of roof tiles complete in all respects.

RECESSED CONDUIT PIPE WIRING SYSTEM WITH FLUSH PIANO TYPE SWITCHES:

Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge welded conduit pipe 20mm/ 25mm dia (1.6mm thick) ISI Marked recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for having (Flush/ Piano type accessories) Step type electronic fan regulators 100watts (socket size), bell push, 5Pin 6Amp. sockets (4Module Box), 16Amp. universal sockets (6Module Box), 6/16/20Amp. Switches etc. and covered with brown bakelite white glazed translucent backside painted sheet 3mm thick etc., PVC connector (For Fan Box and Call Bell), PVC Bush, Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), CI Circular junction Boxes (Four way 1½" deep for walls and 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-

Wiring fan point (Without fan box)

Wiring light point

Wiring 6Amp. Plug control comprising wall socket point

Wiring 16/20Amp. power plug control point

Providing and fixing of ceiling fan of reputed make such as Crompton or equivalent

Providing and fixing of electric tube set of reputed make

CONSTRUCTION OF MASONRY HAUDI AROUND TUBE WELL

Earth work in excavation in foundations, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonary in 15 cm layers with compaction including disposal of all surplus soil as directed within a lead of 30mtr

`Cement concrete 1:8:16 with 40mm gauge stone aggregate

First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth

12.5mm thick cement plaster 1:4

Prov. & Fixing M.S Angle Iron cover frame welded with M.S Steel 10 gauge

Pumping Machinery

Providing & Installing Testing & Commissioning of One No. Electrically driven Submersible Pumping set of reputed Make capable of delivering 724 LPM against a head of 58 mtr along with electric panel board consisting of electric appliances such as automatic Star Delta Push Button or oil immersed Starter, Main Switch, VM, Ampere Meter, ELCB, Shunt Capacitor, Single Phase preventer, Indicating Lamps, Kit-Kat etc. including G.I Column Pipe of suitable size 100 mm =31 mtr (in 3 mtr lengths each with flanges , screwed and welded on both sides) rubber gaskets, nuts and bolts submersible cable (reputed make) complete in all respects as per standard Specifications.

Cost of pumping set

Cost of lowering (with length) 100mm i/d =25mtr

Cost of submersible Cable (with Length) 4.00mm2=62mtrs

Cost of Panel Board

C.I FITTING INSIDE PUMP CHAMBER Providing and installing 100mm dia delivery main (From Tube well to Duck Foot bend including cost of C.I/D.F Pipes, D/F Sluice valves, D/F NRV & Specials as C.I Bends, Tail Piece Tees etc.. inside the pump chamber as per standard design complete in all respects as Annexure A12 – 1 & Drawings D-12 & D-17.

Providing and laying, jointing, fixing, testing ISI marked 15mm G.I. Pipe (as per IS 1239) B- Class, premium make such as (Jindal, Hissar) including cost of specials such as tees, bends, sockets elbow, cutting threading and testing in trenches in the ground complete. (New tubewell delivary main to chlorinator in existing pump chamber)

4.00mm2 extra cable from new tubewell to existing pump chamber

Repair of Development of Water Work Site

Providing & fixing G.I. Barbed wire 3 ply fencing around the head works site in three rows complete in all respects including cost of winding wire & aluminum painting complete in all respects as per standard Drawing D-6 & 8.

Providing & Fixing PCC Fencing Poles With 6' height, 3" x 3" Top & 4" x 3" Base provided with 3 nos. hooks complete in all respects

Providing & fixing D.Hook complete with MS Bolts size 300mm x 18mm as per standard Drawing D-7.

Construction of brick masonry corner pillar including cost of cement pointing including cost of material complete in all respects as per standard Drawing D-3.

Construction of Cement Concrete, Foot Path with masonry toe wall & earth filling inside water works as per standard Drawing D-7.

Providing & fixing MS Sign Board as per standard size of DWSS as per Drawing D-20

CARRIAGE OF MATERIAL

Extra Carriage of Bajri (Course Agrregate) Payable upto lead 110 Km

Extra Carriage of Sand (Fine Aggregate) Payable upto lead 110 Km

Environment Provision

Rough grassing including uprooting rank vegetation and weeds by digging the area to a depth of 15 cm, removing all weeds and other growth with roots by forking repeatedly, breaking clods, mixing fertilizer, levelling and dressing for planting new grass, including disposal of all rubbish with all leads and lifts, planting doob grass in rows 15 cm apart in both directions, watering and maintenance till first mowing.

Digging of pits in all kinds of soil & refilling the same, with the excavated earth mixed with well decayed farm yard manure @ 30% of pit volume and insecticide for termite control.

Supplying and planting permanent trees in prepared pits and watering

Planting ground covers (ordinary) including digging of beds to 15 cm depth and mixing FYM, fertilizer and insecticides, planting of sapling at 25cm distance from plant to plant and row to row.

Planting bulbous flower beds including digging of beds to 15 cm depth and mixing FYM, fertilizer and insecticides, planting of sapling at 30cm distance from plant to plant and row to row.

Provision for one way stand post with khura complete in all recpect.

Credit to old delivery main

Credit to Old Submersible 27.50BHP Set of Scheme Akhalgarh Dhapaian

Credit to Old lowering (Coloumn Pipe 100mm Dia G.I =12.10 kg Per meter x 30 mtr. X 12.10=363 kg x@40 Rs. Per Kg.

Credit to Old Sluice valve 2 No. 150mm (per S.V 55 kg.) @Rs. 40/- per kg.

Note: (1) Item for which no rate or price has been entered in will not be paid for by the Employer when executed and shall be deemed covered by the other rates and prices in the Bill of Quantities.(Refer ITB clause 4 (d) & GCC clause 3.4). (2) Unit rates and prices shall be quoted by the bidder in Indian rupee. (3) Where there is a discrepancy between the rate in figures and words, the rates in words will govern. 4) Where there is a discrepancy between the unit rate and the line item total resulting from multiplying the unit rate by quantity, the unit rate quoted shall govern

B M Builders and Engineers Regd

JIWANJOT SINGH