REPAIRS TO KITCHEN TOILET AND OTHER HYGIENIC WORKS CLEANING OF WATER TANKS AT MIL STN AUNDH UNDER GE MH AND RH KIRKEE

Amount

Taking down cement or cement lime plaster of any description all as specified and directed .

M& L for rendering to external surface, 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces including uprooting/cutting of vegetation growth (maximum height upto three stories) using WPC @ 3% by weight of cement all as specified and directed (Note: WPC will be measured and paid seperately)

M&L for rendering to internal surfaces, 15mm thick in CM (1:6) on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement ) all as specified and directed

Supply only intergral water proofing compound.

M&L for of preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer over 3mm thick Birla wall care putty finished even and smooth , all as speciified and directed

M&L for preparation of new plastered surface and applying two coats of weather proof exterior paint (Apex Ultima or equivalent) over a coat of primer complete all as specified and directed

M&L for complete removal of existing finishes by scraping down old decorative surface of walls with steel wire brushes of smoke spots, moulds, efflorescent salts including filling of spots with POP and applying two coats of white wash on old surfaces of walls all as specified and directed.

M&L preparation of old surfaces applying of two coats of white wash on ceiling all as specified and directed.

M&L for applying one coat of weather proof exterior emulsion paint (Apex Ultima or equivalent) upto any height with approved colour and pattern on old surfaces including removing/ uprooting vegetation growths etc complete all as specified and directed.

M & L for complete removal of existing finishes, upto any height, by scraping down of old decorative surface of walls with steel wire brushes of smoke spots, moulds, efflorescent salts and cutting/uprooting vegetations growth, including filling of spots with POP and applying of two coat of cement base paint over a coat of primer all as specified and directed.

M&L for providing water proofing plaster at the junction of wall and slab at chajjas , lintels, etc of average thickness 20mm in CM (1:3) with water proofing compound , finished even and smooth without using extra cement all as specified and directed. Note :- Rates shall deemed to be inclusive of Cost of water proofing compound

M&L for rendering 10 mm thick on concrete surface in CM 1 :3 as in ceiling etc. all as specified and directed.

M&L for preparation of new plastered surface and for applying three coats of white wash on ceiling all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding/complete and removing rubbish off the premises complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level ) all as specified and directed

M&L Coloured Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile laid over and including 15 mm thick screed in CM 1:6 all as directed.

All as per item No 16, above but as in dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM 1:4, set and jointed in neat white or coloured cement to match the surfaces of tiles all as specified and directed.

M&L Coloured Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile laid over and including 15 mm thick screed in CM 1:6 all as directed.

M&L glazed ceramic tiles (350x250x7mm or 450x350x7mm) colour tiles on walls etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the work over 10 mm rendering in CM 1:4, all as specified and directed.

M&L glazed ceramic tiles in vertical surface 300 x 200 x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the work over 10 mm rendering in CM 1:4, all as specified and directed.

M&L for 25mm thick, levelling course of cement concrete type B-0 , 1:2:4 (12.5mm graded aggregate) as in flooring for laying tiles all as specified and directed.

M&L for 40mm thick PCC type B-1 , 1:2:4 (20mm graded aggregate ) as in flooring all as specified and directed

M&L for 75 mm thick, PCC 1:4:8 type D-2 (using 40mm graded stone aggregate)as in sub base, all as specified.

M&L for Pre polished Chequered cement tiles tiles 30cmx30cmx 25 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:6.

M&L for PCC 1:3:6 type C-2 , 75 mm thick as in plinth protection all as specified and directed

Demolition of Stone slabs and tiles of any description or thickness laided bedded and pointed in cement mortar in floors, aprons etc.

M&L machine cut kota stone slab flooring 20-25 mm thick in one piece as in treads of staircase etc over cement screed base laid and jointed with grey cement slurry mixed with pigment to match shade of the slab including rubbing and polishing complete, over 15 mm thick screed bed or bedding in CM 1:6 for laing floor finishes, all as specified and directed.

M&L 25mm Granite (of any type) work (table rubbed and polished) in steps, jambs, cills, for counter tops and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over and including 20mm Screed bed in CM 1:4, all as specified and directed.

Demolition of brickwork or stone work/boulder masonary built in cement mortar or cement lime mortar all as specified

M&L for precast cement concrete, type C-1, 1:3:6 (20mm graded aggregate ) masonary with solid blocks, exc , 10cm in width and setting in cement mortar (1:6) complete all as specified and directed.

S&F in repair sheet glass 3.0mm thick, ordinary quallity and glazing with oil putty in square n.exc 0.5 sq.m in each pane including hacking out old broken glasses any thickness, size quality and description all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store, all as specified and directed.

S & F 15 mm bore tubes, medium grade, galvanised, with all fitting & fixed complete to walls & ceiling or laid in floors, all as specified and directed.

All as per item No 33, above but fixing only old pipes with new fittings where requied all as specified and directed.

Cutting chases, pinning in brick walls, making good to facing where required and pointing in cement mortar (1:3) and making good , cutting n.exc 10cm girth , all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections and S&F 20mm bore tubes, medium grade, galvanised , with all fitting & fixed complete to walls & ceilings or laid in floors all as specified and directed

S & F 20 mm bore tubes, medium grade, galvanised, with all fitting & fixed complete to walls & ceiling or laid in floors, all as specified and directed.

All as per item No 37, here-in-before but fixing only old pipes with new fittings tubes of 20mm bore, all as specified and directed.

Supply & fixed in repairs 15mm bore fancy type bib taps, cast copper alloy, with capstan heads,chromium plated , screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. (Make : Jaguar or equivalent)

S&F in repairs bib tap suitable for 15mm bore iron pipe , PTMT any colour, screwed for iron pipe and fixed (Min Wt-90 gms) all as specified

S&F in repairs two way bib tap 15mm chromium plated Cat No CON-041 KN of M/s Jaquar/Cera CI206/ F330004 of Hindware

Supply & fixed in repairs 15mm bore Stop valves, cast copper alloy, fency type, chromium plated with long or short shank and cup ( concealed type) screwed down high pressure , screwed both ends for iron pipe or for unions.

Supply & fixed in repairs 15mm bore angular Stop valves, cast copper alloy, fency type, chromium plated with long or short shank and cup ( concealed type) screwed down high pressure , screwed both ends for iron pipe or for unions.

S&F in repairs , CP brass , chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed.

S&F in repairs 15mm dia pillar taps, CP brass, chromium plated with capstan heads chromiun plated screwed down high pressurewith hot &cold with long screwed shanks and fly nuts, all as specified and directed. (Make : Jaguar, CAT Part No con -011KN or equivalent)

S&F 15mm bore CP Central Hole Basin Mixer without Popup Waste System with 450mm Long Braided Hoses fittings complete all as specified and directed ( Make : Jaguar Cat Part No CON-167KNB Hindware F280009CP /Cera F2002461)

S&F in repairs Health faucet brass chromium plated (ABS Body) with 8mm Dia, 1 Meter Long Flexible Tube & Wall Hook fixing to 15 mm bore of pipe all as specified and directed.(Make - Jaguar Model No - ALD-CHR-593N F8030301 of Cera /F160002 of Hindware)

S&F in repairs 15mm Brass CP wall mixer tap including provision for overhead shower for mixing " Hot or Cold" water screwed down for iron pipe all as directed (Make : Jaguar, CAT Part No FUS- 29273UPR F1014402 of Cera/ F 110018 of Hindware)

S&F in repair toilet paper roll holder, Cat No 1151 N of M/s Jaquar/ F5002110 of Cera/F880003CP of Hindware complete all as specified and directed.

S&F in repairs rotational moulded PVC water storage tank 500ltrs capacity conforming to IS-12701(1989) cylindrical vertical type multi-layered with closed top including inlet,outlet and wash out holes of approved make hoisted and fixed in position all as specified in SSR Part I (Make:SINTEX/POLYCON).

All asper iem No 50 but 1000ltrs capacity.

S/F sheet glass shelf assembly consisting of 5.5 mm thick sheet glass 12 cm wide with CP bracket guard and railing 60 cm long all as specified and directed.(Make : Jaguar, Cat Part No CAN -1173)

S&F in repairs Towel Ring (of approved pattern) complete all as specified and directed.

S & F in repair PVC valveless syphonic action type flushing cistern (Low or high level) of 10 litre capacity, white/coloured with inlet ball valve, float, handle including fixing brackets and 32 mm bore PVC flush pipe etc complete all as specified and directed. (Make : CERA, Hindware or Equivalent )

S & F in repairs Vitreous China Squatting pan Orissa pattern long pan, size 580 mmX440mm white with `P' or `S' trap, front or back inlet and foot rests any pattern including connection to trap and to flushing pipe, anti-syphonage pipe etc, including trap set in and including concrete complete including making good to floor all as spfd and directed.

S & F in repairs PVC connection of 450 mm length, suitable for 15 mm bore pipe with PTMT nuts, all as specified and directed.

S & F in repairs PVC connection of 600 mm length, suitable for 15 mm bore pipe with PTMT nuts, all as specified and directed.

S&F in repairs vitreous china wash hand basin white size 550x450mm flat back size 550x400mm excluding taps waste chain and plug and porcelain stopper but including brackets cutting for pinning in ends of brackets of erecting stand but exclusive of fixing of supply and waste pipe all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) but including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, seat cover complete , all as specified and directed.

S & F in repairs Plastic seat cover to EWC with aluminium hinging device all as specified and directed.

S&F in repair toilet paper holder brass chromium plated fixed to wall with brass screw complete (Make :- Cat No AHS-1551 Make JAQUAR/F870008CP hindware/ F50001109 Cera ).

Supply and fixing CP soap dish holder complete all as specified and directed. (Make:- Cat No CAN-CHR-1131N Jaguar/F-870004CP Hindware/F5001106 Cera

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including cantilever brackets, CP waste coupling and PVC waste pipe overall size of sink 915mm x 460mm bowl size 410mm x 330mm x 160mm all as specified and directed.

All as per item No 63 above but sink of size 495mm x 420mm bowl size 410mm x 330mm x 160mm and without drainage board complete all as specified and directed.

S&F in repair plate rack made of stainless steel 1mm thick and overall size 915mm x915mm x 255mm, inlcuding taking down old /unsv complete all as specified and directed.

All as per item No 65 above but size 750mm x600mm x 250mm complete all as specified and directed.

S & F in repairs 15mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S & F in repairs 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

Cleaning of serviceable RCC/PVC water tanks nex 250 ltrs and n.exc 500 lters up to 20 mtr from ground level and dewatering complete by pumping motor set or manually and removing all scales and dirt settled at bottom, scrapping of floor/wall internally by wire brush and washing floor and wall with diluted sulphuric acid to remove the algae alongwith foreign material from inside to outside where directed. After cleaning the same wash the surface of the wall with lime solutions/lime water with two coats and dried upto with anti bacterial spray and ultra voilet raiation treatment etc i.e complete in all respect including writting letters or figures for date of cleaning and capacity of tank with synthetic enamel paint black background and leter/numbers in white colour and word size is 10 cm height on tank complete to the entire satisfcation of Engr in Charge all as specified and directed by Engr in Charge. Note: Contractor will arrange necessary T & P required for execution of work as per ground in such a way to avoid hampering of water supply to user and same will be done as per instruction and as directed by Engr in Charge.

All as per item No 69 above but water tanks exc 500ltrs and n.exc 1000ltrs complete all as specified and as directed.

All as per item No 69 above but water tanks exc 1000ltrs and n.exc 2000ltrs complete all as specified and as directed.

Refixing only the tanks in position including taking out existing serviceable 500ltr capacity PVC water storage tanks in any position all as specified in SSR Part I, complete all as directed.

All as per item No 72 above but 1000 ltr Capacity

All as per item No 72 above but 2000 ltr Capacity

S&F 20mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms)

All as per item No 75 but Fixing only complete all as specified and as directed.

S&F in repairs 25mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms)

S&F in repairs PVC ( SWR) bends any radius bore of 75 mm all as specified and directed.

S&F in repairs PVC ( SWR) bends any radius bore of 110 mm all as specified and directed.

S&F in repairs PVC (SWR) pipes 75 mm dia single sockets, in any length rubber ring joints, laid in trenches or in floor all as specified and directed.

S&F in repairs PVC (SWR) pipes 110 mm dia single sockets, in any length rubber ring joints, laid in trenches or in floor all as specified and directed.

All as per items No 81 here in before but fixed to walls etc all as specified and directed.

S&F in repairs PVC (SWR) branch 75 mm bore piecs, single ( single Y ) equal or unequal all as specified and directed.

All as per items No 83 here in before but 110mm bore etc all as specified and directed.

S&F in repairs PVC (SWR) junction 75mm bore single ( single T) equal or unequal all as specified and directed.

All as per items No 85 here in before but 110mm bore etc all as specified and directed.

S&F in repair grating square or rectangular 150mm size of PTMT (minimum weight 100 gms)all as specified and directed.

S&F in repairs kitchen sink coupling complete all as specified and directed

S&F in repairs PVC waste outlet pipe for kitchen sink complete all as specified and directed.

S&F in repairs PVC waste outlet pipe for 32/40mm dia WHB complete all as specified and directed

S&F in repairs Cast iron soil 100 mm bore , waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors

S&F in repairs Cast iron floor trap 100 mm bore with grating including jointing to waste pipe and fixed with PCC 1:2:4 , all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exceeding 1.5 Sqm each and removing from site of work.

S&F Solid PVC door frame of size 50mm X47 mm made out of 5mm plain colour PVC sheet rinforced with MS Square tube suppling and fixing in opening as per specification and drawing.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip if 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bootom rail on either side & as gap insert for top rail and bottom rail ; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles. & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling and fixing in the frame at site as per specification & drawing Complete all as specified and directed.

Supply & Fixing 75 mm long colled rolled mild steel medium wieght butt hinges.

Supply & Fixing 125 mm long anodized aluminium handle, ‘D’ type.

Supply & Fixing 200 mm long anodized aluminium barrel tower bolt.

Materials and labour for PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in hold fast blocks including necessary forms, moulds etc.

S & F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixing to steel window with nut bolt,fixed in repair.

S& F in repairs, 3mm thick sheet glass ordinary quality n.exc 0.5sqm each pane.

M & L for cleaning the plastered /concrete surface with wire brush and applying water proofing treatment as under:- (a) Apply one coat of water based bituminious primer @ 0.20 Kg per Sqm. (b) Laying APP polimerised modified membrane weighing not less than 3.5Kg / sqm by torch application method. (thickness of membrane shall not be less than 3 mm). (c) The overlap for APP membrane shall be 75 mm on longitudinal direction and100 mm on transverse direction. (d) Finally applying a coat of solar reflective bituminious aluminium paint @0.15 Kg/Sqm over the membrane.

ANJALI CONSTRUCTIONS

M/S JAYCONSTRUCTION CO

Sunrise Traders