8120/SAR-22/E8 REPAIRS TO BOUNDARY WALL, FENCING, GATE, DRAIN ETC AT AF STN SARSAWA

Amount

Demolition of brick work built in cement mortar including all quioins, arches, pillars etc complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc including racking out joints,hacking for key,scrubbing down with water etc all as specified and directed

M & L for brick work with sub class 'B' bricks in straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 mixed with WPC as per manufacture's instruction and finished the surfaces even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge. Note: WPC will be measured and paid for separately complete all as specified and as directed by Engr-in-Charge.

Supply only integral water proofing compound as per latest IS specification of Dr. Fixit complrte all as specified.

Material and labour for preparation of new plastered surfaces and applying one coat Apex paint over a coat of alkali resistant priming paint manufactures by ASIAN paints complete all as specified and as directed any tint. Note: The Camouflaging Pattern of colour shall be as under Code 2361 - 40% Code 0342 - 30% Code 8252 - 10% Code 8613 - 20%

Dismantling of plain steel sheeting any gauge, thickness,including Nainital or similar pattern in wall cladding complete all as specified and as directed by Engr-in-Charge.

S&F of plain,galvanised mild steel sheeting 0.63mm thick in ridges,wall cladding,hips,valley gutters drip and straight flashings(length and girth as fixed) with grade of zinc coating 275 complete all as specified.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specially provided for all as specified and as directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specially provided for all as specified and as directed.

Dismantling post or struts (Wood steel or RCC) any section incl taking out embedded portion & making good disturbed portion complete all as specified and as directed by Engr-in-Charge.

Dismantling chain link fencing or fencing wire mesh of any type complete all as specified and as directed by Engr-in-Charge.

Excavation in post holes (or similar holes) each n exc 0.5 Cum getting out, returning filling in and ramming earth or broken rubble mixed with earh around in layer n exc 25cm watering & removing surplus soil to a distance n exc 50m & making good surface in soft/loose soil complete all as specified and as directed by Engr-in-Charge.

M&L providing cement concrete type B-2 1:2:4 (40 mm graded agg) in foundation ,filling and mass concrete as in posts complete all as specified and as directed by Engr-in-Charge.

S&F mild steel work as in posts or struts of fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, including all necessary drilling, bolting or riveting etc conforming to Fe- 290 Gde E-165 complete all as specified and as directed by Engr-in-Charge.

Ditto item above but fixing only complete all as specified and as directed by Engr-in-Charge.

S&F in repairs Galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and fixed to any type of standard rails straining bolts incl securing or tying at crossing with and provn of Galvanised MS wire complete.

Supply only GI chain link fencing 4mm dia, made of mild steel GI mesh 50 X50 mm ,straining bolts etc with 10 mm dia round bars and flat iron 40 mm x 6 mm thick, binding and jointing complete incl all necessary drilling, bolting or riveting etc confirming to Fe 410. NOTE:- 10mm dia round bars and FI shall be measured and paid separately complete all as specified and as directed by Engr-in-Charge.

Fixing only,any mesh size and type straining bolts etc,including provision of binding wire complete complete all as specified and as directed by Engr-in-Charge.

S&F mild steel work in MS flat for securing chain link fencing with posts/struts and filxed with nuts/bolts and similar items conforming to Fe 410-(Gde-E-250) quality complete all as specified and as directed by Engr-in-Charge.

S&F Round bars 10 mm dia and over cut to length bent to shape required incl binding with MS anealed wire not less than 0.9mm dia or securing clips with fencing wire mesh complete all as specified and as directed by Engr-in-Charge.

S&F Mild steel screws bolts (Machine made) made hexagonal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with one hexagonal or square nut , exc 5 cm but nexc 10 cm long dia of shank 5 to 10mm complete all as specified and as directed by Engr-in-Charge.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer exc 10 cm width or girth complete all as spcified.

M&L Brick work with sub-class 'B' bricks,straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed by Engr-in-Charge.

M & L PCC 1:3 :6 type C-1 (20mm graded stone aggregate) as in surface channels of drain including necessary from work complete all as specified and as directed by Engr-in-Charge.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and as directed by Engr-in-Charge.

All as per Serial Item No 26 herein above but line of 150 mm bore pipe-ditto-. complete all as specified and as directed by Engr-in-Charge.

M&L for precast cment concrete 1:2:4 type B1 20 mm graded stone aggregate as in drain / man holes cover and set in cement mortar 1:4 and laid in position complete all as specified and directed.

S&F mild steel TMT bar 6 to 8 mm dia cut to length, bent to shape, required including crancking, bending and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

S&F in repair Punched tape concertina coil 600mm dia or any other coil size of any type of standards,rails etc including provision of mild steel(annealed) binding wire complete all as specified and directed.

S&F in repair Punched tape concertina coil 1000mm dia or any other coil size of any type of standards,rails etc including provision of mild steel(annealed) binding wire complete all as specified and directed.

S&F Mild steel work in framed work such as in doors or gates grills, gratings,framed guard bars,ladders etc with ends of bars shouldered and/or riveted or forged into spikes and similar work confirming to Fe-410-O as in framed and hung gates including pintle hinges,stops,hand made sliding bolts etc and similar work confirming to Fe-410-W complete all as specified and directed.

M&L for taking out sand from stop butt and refilling the same after screening to the required level and slope including watering and ramming. Note:- During Screening of sand bullet spinklers shall be handed over to concrened Air Force authorities complete all as specified and as directed by Engr-in-Charge.

M&L for taking out sand from stop butt and refilling the stop butt to required level with screened sand & saw dust complete all as directed. Note:- (i) The upper layer of stop butt (Top 3 feet height) to be filled with saw dust and sieved sand mixed in equal proportion. (ii) Sand taken out from stop butt shall be reused after sieving. (iii) Saw dust shall be procured by the contractor. (iv) Extra sand required shall be brought by the contractor and shall be paid under Srl No-35 as supply only.

Supply only screened sand for filling in stop butt complete all as specified and as directed by Engr-in-Charge.

S&F of plastic jute bags filled with sand weighing 35 to 40 kgs each as per sample and stacking at a level as directed including removal of existing worn out bags complete all as specified and as directed by Engr-in-Charge.

MS GURENDER SINGH

RAJAN TRADERS

Laxmi Builders

DHARAMPAL SINGH AND SONS