PROVISION OF CERTAIN SANCTIONED WORK IN BLDGS P 43 AND NCC OFFICER MESS UNDER GE NORTH BANGALORE

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in hard / dense soil etc complete all as specified and as directed

Returning, filing in, excavated soil including spreading, levelling, watering and well ramming in layers not exceeding 25cm etc complete all as specified and directed

Removal of excavated materials exceeding 250mtr but not exc 500 mtr and depositing where directed etc complete all as specified and directed

M&L Precast cement concrete block masonry Type C1 1:3:6 (using 20mm graded stone aggregate) with solid blocks, exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed.

M&L providing cement concrete type B0 1:2:4 (12.50mm graded stone aggregate) in copings, parapets and railing upto 60cm height, leveling concrete for Roof slab, kerbs, water troughs/Chajjas and the like including weathering, slightly rounded or chamfered angles and throating as directed

M&L for rendering 10 mm thick in CM (1:3) on fair faces of brick work or concrete surface mixed with water proofing compound as per manufacture instruction etc complete all as specified and as directed Notes : WPC shall be measured and paid seperately

M&L for 3mm thick APP modified water proofing membrane as per IS 1654-2017/IS 16352-2017, and weighing not less than 3.60 kg / Sqm reinforced with non woven polyster /HMHDPE matt black finished over compatible primer/bonding bitumen @ 0.40 Litr/Sqm and torch applications of membrane with 75mm side overlap and 100mm end lap after necessary preparation of surface complete as per manufacturer's instructions and applying a coat of solar reflective bituminous aluminum paint on top @ 0.10 litre/sqm complete all as specified and directed incl taking down existing roof treatment of any types incl HP clay tiles etc complete all as specified and directed.

M&L for rendering 5 mm thick in CM 1:3 on fair faces of brick work or concrete surface finished even and smooth without using extra cement as in ceiling etc complete all as specified and as directed

M&L for rendering 15 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces, finished plastered surface even and smooth without using extra cement etc complete all as specified and as directed

M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces, finished plastered surface even and smooth without using extra cement, mixed with water proofing comound etc complete all as specified and as directed Note: WPC will be measured and paid separately.

Supply only liquid water proofing compound

M&L for Plain cement concrete Type D-2 (with using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

S&F TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending etc and securing with including Mild steel wire (annealed) not less than 0.9mm dia etc complete all as specified and as directed

All as per item No 13 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders etc complete all as specified and as directed

M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter flat with rough finished surface of concrete etc complete all as specified and as directed

M&L RCC (Nominal mix) type A1, 1:1.5:3 (20mm graded aggregate), as in foundation incl rafts, fottings, foundation beams, plinth beam, base for columns etc basement slab under reamed piles and mass concrete etc complete all as specified and directed.

M&L for Form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc also splays between floors and beams etc rough finished the concrete surface in flat complete all as specified and directed

M&L RCC (Nominal mix) Type A1 1:1 1/2 :3 (20mm graded stone aggregate) (nominal mix) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

S&F Steel work in tubular trusses confirming to IS-4923, including special shaped washer as in Vertical col, Trusses, purlins incluidng welding or riveting etc complete all as specified and as directed

M&L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 etc complete all as specified and as directed

S&F 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with coach screws and washers in roof, wall etc complete all as specified and directed

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified etc complete all as specified and as directed

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as valley / ridges etc, fixed with self tapping screws as specified etc complete all as specified and as directed

M&L 75 mm thick plain Cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) as in sub base of flooring etc complete all as specified and as directed

S&F spreading of M-sand as cushioning of paving block etc complete all as specified and directed

M&L for 60 mm thick, M-35 grade, machine presssd pre-cast concrete interlocking coloured paving Block of glossy finished vibro compacted any shape and size confirming to IS-15658-2006 match with grey cement and pigment etc complete all as specified and as directed

M & L 25 mm thick plain cement concrete type B0 1:2:4 (12.5 mm graded stone aggregate) finished even and fair etc complete all as specified and as directed .

M&L Screed bed or bedding layer of mortar 15mm thick in CM 1:6 for laying floor finishes complete all as specified and directed

M&L for 18mm thick granite Granite stone slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granit including grinding the edges half round and polishing including etc complete all as specified and directed.

M&L for cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick, exterior grade, coloured glossy finish rubber pressed, set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc. complete all as specifed and as directed

M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

M&L for Vitrified Ceramic tiles (dark shade) 9 to 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm & but not exc 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed

M&L for double charged / Ultracharged vitrified ceramic tiles 9- 10mm thick (square/rectangular) polished, area of each tiles exc 0.42sqm but not exc 1.00 sqm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

M&L Rendering 10mm thick in CM (1:4) on Brick work or stone masonry surface as backing coat of tiles complete all as specified and directed

M & L Glazed coloured ceramic tiles in vertical surfaces 300x450x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and directed

M&L for vitrified ceramic tiles (double charged / ultracharged) 9-10mm thick (square/rectangular) polished, area of each tiles exc 0.42sqm but not exc 1.00 sqmin vertical surfaces such as skirting /dados, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

All as per item no 32 above but as in skirting etc complete all as specified and as directed

M&L for 75 mm thick PCC 1:3:6, type C-1, using 20 mm graded aggregates as in plinth protection etc, finished even and smooth without using extra cement complete all as specified including joints filling with sealing compound Grade "A" complete all as specified and directed.

M&L for rubber moulded pre-cast Kerb stones of cement concrete 1:2:4 (20mm graded stone aggregates) factory made, size, shape, pattern and finished as approved, including rounding, chamfered or half round and bedded of perfectely levelled surface pointed and jointed in CM 1:4 etc complete all as specified and as directed

S&F Pressed steel frames of size 125x60mm, Factory made for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified

S&F Pressed steel frames of size 105x60mm, Factory made for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified

S&F 35mm thick flush shutter solid core construction with decorative choice lamination both sides of shutter, kiln seasoned and chemically pressure treated complete all as specified and as directed

S&F Solid PVC door frame (Single rebated) of size 60 mm x 30 mm made out of solid foam with homogenious fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100x8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) complete all as specified and directed

M & L for factory made solid PVC moulded door shutter , 28 to 30mm thick (stiles) wuth 2,4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm plain colour PVC sheet on back face supplying and fixing in frame at site as per specification & drawing with wood free EPS.

S&F framed work as in doors or gates of angle or other sections with gusset plates, rails braces, etc complete drilled for fixing of steel sheeting or other covering, doors etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete all as specified and directed

S & F Butt hinges stainless steel 100mm long and fixed to door frame and shutter duly welded / screwed complete all as specified and as directed

S&F Aluminium anodised tower bolt 200 mm long of extruded section etc complete all as specified and as directed

S&F aluminium alloy, anodised sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy etc complete all as specified and as directed

S&F 150 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed

S & F 150 mm floor door stopper of aluminium alloy powder coated, with hard down steel spring all as specified and as directed.

S&F mild steel 300mm, ordinary rat tail rod pattern springs,including roller and roller plate complete

S&F Powder Coating (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete shall as specified and as directed

S&F Powder Coating (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, fixed/Sliding type without sash bar, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified complete all as specified etc. complete shall as specified and as directed Note - Wire Cloth & Glass shall be measured and paid separately under respective items.

S&F Powder Coating (minimum thickness of powder coating 50 micron) aluminium door shutters, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified. Note - Glass and particle board shall be measured and paid separately under respective items.

S & F stainless steel wire cloth 0.36mm nominal dia and average width of aperture 1.40mm and fixed with tinned tack or galvanized wire staple all as directed fixed.

S & F 5.5mm thick tinted sheet glass and glazing with oil putty in squares exc 0.5 sq. m in each pane etc complete all as specified and as directed

S&F 4mm thick tinted sheet Glass, Ordinary qulatity and glazing with oil putty in squares in not. exc 0.5 sq.m in each pane etc omplete all as specified and as directed

S&F 8 to 9 mm prelaminated particle board, exterior grade, with both side decorative choice lamination & other side balancing white lamination, fixed with screws in Door / Partiton work etc complete all as specified and as directed

S&F aluminium Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed in repairs etc complete all as specified and as directed

S&F 20mm dia GI tubing medium grade and fixed complete to walls and ceiling or laid in floors including taking down existing pipes complete all as specified and directed

S&F 25mm dia GI tubing medium grade and fixed complete to walls and ceiling or laid in floors including taking down existing pipes complete all as specified and directed

Supply & laying 20 mm outer dia CPVC pipes SDR 11 (Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all fittings and specials complete all as specified.

All as per item No 62 above, but 25 mm dia of bore pipe

M&L rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I capacity of tank 1000 ltrs complete all as specified and directed

S&F 20 mm dia of bore ball float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and as directed [Minimum weight for 20 mm – 210 gms] .

S & F 20 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and including taking down old gate valve all as specified and as directed.

S & F 25 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and including taking down old gate valve all as specified and as directed.

S & F vitreous china wash basin white flat back size 550x400mm excl chain and plug and porcelain stopper but incl CI bracket. waste fittings, brass chromium plated for glazed ware sinks, basins etc with long screwed shanks and flynuts, flange end bedded in red leead cement and other end fixed, PVC waste pipe 75 cm long complete all as specified and directed

S & F vitreous china wash down water closet pan (Pedestal Pan) including fixing bolts, flush pipe anti syphonage pipe, plastic water closet seat back closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device etc complete of cera model cat pt no. 2008 incl plastic EWC seat cover, coloured closed pattern with flat bottom and cover of cera model cat pt 2308 and mild steel chromium plated or aluminised hinging device complete all as specified and directed

S&F PVC valveless, syphonic action type, flushing cistern, Duo Flush cistern 10ltr capacity,low level, white, with inlet, ball valve, float and handle including brackets, connections to pipes and fixing of chain and pull, or lever, complete all as specified and directed. (Cat No-502 of Prayag or equivalent in any approved make as in CA)

S&F Brass CP wall mixer for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed (Cat No-7875 URBONA series of Prayag or equivalent make as specified in CA)

S & F 15 mm Single lever Basin mixture tall height W/o Pop Up waste system all as specified and as directed.(Cat No PIS-7852 URBONA series of Prayag or equivalent make as specified in CA)

S&F Brass chromium plated overhead shower rose 100 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed. (Cat No BS-67 Marcus series of Prayag or equivalent make as specified in CA)

S & F 15mm angle cock CP cast copper alloy screwed down high pressure with capstan head handle screwed both ends or for unions etc . (Cat No PIS-7810 URBONA series of Prayag or equivalent make as specified in CA)

S & F Bib Cock 2 way double handle with CP flange as fixed all as specified and as directed. (Cat No-7812 URBONA series of Prayag or equivalent make as specified in CA)

S&F Health faucet, brass body with 1mtr SS braided tube & wall hook complete all as specified and as directed (Cat No-BEA-41/BEA-85 of Prayag or equivalent make as specified in CA)

S & F Towel rail stainless steel glossy finish complete all as specified and as directed. (Cat No-BA10S of prayag or equivalent make as specified in CA)

S&F towel rack Brass glossy finish complete all as specified and directed. (Cat No BA-03 of Prayag or equivalent make as specified in CA)

S&F Towel ring Brass glossy finish complete all as specified and directed (Cat No BA-02 of Prayag or equivalent make as specified in CA)

S&F Soap dish chromium plated brass all as per Cat Part No BA-45 of Prayag or equivlaent makes fixed in wall as per manufacturers instruction.

S & F mirror 600x450 x 5-6mm thick with frame cat No BLM-01F of PRAYAG or equivalent make complete all as specified and directed

S&F PVC Mirror cabinet of size 400x500 mm (Cat No 554 of Prayag or equivalent make) complete all as specified and as directed.

S&F Unbreakable (Square) wall mounted shelf 500mm (Cat No BEA-47A of Prayag or equivalent make as specified in CA) complete all as specified and directed

S&F Unbreakable corner shelf (3Pcs set i.e 8"-1, 10"-1 & 12"-1) (Cat No BEA-44A of Prayag or equivalent make as specified in CA) complete all as specified and directed

S&F peg set of six (Cat No BEA 30 of Prayag or equivalent make of CA) fixed in wall as per manufacturers instruction

S&F Toilet paper holder (Cat No BA-88 of Prayag or equivalent make of CA) fixed in wall as per manufacturers instructions

S & F PVC connection 15 mm size with PTMT nuts of length 450 mm, all as specified and as directed.

S & F 75mm dia PVC(SWR) multi floor trap,plain with grating including jointing with solvent cement all as specified and as directed.

S & F 75 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including necessary fittings all as specified and as directed.

All as per item No 89 above but 110 mm dia .

S&F 75mm dia PVC (SWR) Bends with access door of any radius

All as per item No 91 above but 110mm dia

S&F 75mm dia PVC (SWR) junction single (single T) equal or unequal with access door

All as per item No 93 above but 110mm dia

S&F 110mm dia PVC(SWR) branch piece, single (single Y) equal or un equal with access door

All as per item No 95 above but 75mm dia

S&F in repair 110mm dia PVC(SWR) branch piece, (double Y) equal or un equal with access door

All as per item No 98 above but 75mm dia

S&F 75mm dia PVC(SWR) vent cowl

All as per item No 99 above but 110mm dia

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement etc complete all as specified and as directed

M & L applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces over 10 cm width or girth including preparation of new steel surfaces

M&L Preparing old wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic Enamel paint etc complete etc complete all as specified and as directed

Complete removal of existing treatment by means of wire brushing, sand paper, manually or mechanically up to visible of plastered surface incl rubbing and washing etc complete all as specified and as directed

M&L for 1mm thick wall care putty on wall including preparation of surface with sand paper etc to obtain smooth surface etc complete all as specified and as directed

M&L for Preparing new plastered suface of walls and applying two coats distemper oil emulsion, white or tinted over a coat of primer etc complete all as specified and as directed

M&L for Preparing Old Plastered suface of walls and applying two coats distemper oil emulsion, white or tinted over a coat of primer etc complete all as specified and as directed

M&L for preparing newly plastered surface of ceiling and applying three coat of white wash etc complete all as specified and as directed

M&L for Preparing Old ceiling surface and applying one coat of white wash etc complete all as specified and as directed

M&L for preparation of newly plastered surfaces on wall and applying two coat of oil bound distemper white or tinted over a coat of alkali resistent primer over 1mm thick putty complete all as specified and directed

All as per item No 110 above but on untreated plastered surfaces of ceiling surfaces

M&L for preparation of new plastered surface of wall and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. etc complete all as specified and as directed

Complete removal of existing treatment of wall and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. etc complete all as specified and as directed

M&L for preparing Old plastered surface of wall and applying two coat of cement base paint etc complete all as specified and as directed

M&L for preparing newely plastered surface of wall and applying two coat of cement base paint etc complete all as specified and as directed

S&F 2nd class hard wood scantling clean sawn surfaces for grid work of wall panelling fixed with nails in the wall including a coat of cresote oil etc complete all as specified and as directed

S&F 8mm thick Block boards, grade 1 quality, exterior grade, commercial type, Water proof, termite proof, fixed with screws to timber frame-work as in wall panelling / cub board shutter, shelves over 4mm thick MFD board, medium density, fibre board, single layer type or three layer type with BWR type adhesive, fixed with screws over 0.90 mm thick decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per maker's instructions (2 to 3 mm grooves to provided of ech MDF board and joints of grooved finished with polish) etc complete all as specified and as directed incl taking down existing boarding etc complete all as specified and as directed

S&F stainless steel decorative curtain rod of 25 mm bore with wood finishes (weight not less 300 gms per running meter) incl fancy finale caps cap etc complete all as specified and as directed

S&F designer curtain rod bracket of dia 25 mm dia made out of SS Flat not less than 20 mm wide 1.50 mm thick and overall length not less than 160 mm fixed with screws min 2 Nos with Rawl Plug of size not less than 50 mm long etc complete all as specified and as directed

M&L for cutting into existing manholes for connecting new drains, internal dia of pipe 150 mm, making good to pipe and rendering, cutting out existing benching for and foring branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 tye B-1 smooth finished, and re-forming benching as required etc complete all as specified and as directed

Taking down shutter of any description area exc 1.00 Sqm but not exc 2.00 sqm each and refixing in same opening etc complete all as specified and as directed Notes : Fixing of hinges, Handle, tower bolt or any minor repairs /easing of shutter shall be carried out by contractor without any extra cost. Nothing extra shall be admissible on this account

Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sqm each etc complete all as specified and as directed

Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4 Sqm each,etc complete all as specified and as directed

Taking down shutter of any description area exc 1.00 Sqm but not exc 2.00 sqm each etc complete all as specified and as directed

Dismantling timber scantlings 40 sq. cm and over in section, in any position as in Framed work etc complete all as specified and as directed

Dismantling water tanks exc 500ltr but not exc 1000 ltr and removing to store etc complete all as specified and as directed

Dismantling of cast iron or reinforced concrete drain/PVC soil waste pipe up to 150mm dia incl fittings, jointed in cement mortar and taking out trenches if reqired etc complete all as specified and directed

Demoltion of Stone set paving of any description or thickness in floors, aprons etc (Laid bedded and pointed in any cement mortar) incl removing off the premises etc complete all as specified and as directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and as directed

Taking down cement plaster of any description hacking for key or raking out joint on old brick work/stone/concrete surface etc complete all as specified and as directed

Demoltion of Cement Concrete (Un-reinforced) of any description and in any position not otherwise specifically provided for etc complete all as specified and as directed

Demolition of brick work /stone masonry/PCC block masonry built in cement mortar of any description all as specified and directed.

Demolition of cement concrete (Unreinforced) and paving not exc 15 cm thick (below or above ground level) etc complete all as specified and as directed.

Removing building materials etc. (other than spoil) beyond the lead included in the rates, including loading, unloading and stacking at the destination etc complete all as specified and as directed

Taking down carefully aluminium/ copper wiring / power point wiring (light, fan, socket or power) complete including fittings such as switches ceiling roses, regulators, sockets light fittings, fans etc and making good the disturbed surface of walls, ceiling etc incl painting with same colour of the back ground complete all as specified and as directed by Engineer-in-Charge.

Point wiring complete with 1.5 Sqmm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor conforming to IS 694 drawn through and incl non-metalic rigid PVC conduit medium grade ISI marked incl accessories incl GI/ MS branded sunken boxes of suitable module concealed and surface type run on walls including modular frame and cover of suitable module fixed with cadmium plated iron screws for housing modular type switches, switch socket outlets, fan regulators etc., incl provision of 1.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed for the following :- (a) One light point controlled by one switch

All as per item No. 136 above but for (b) One fan / exhaust point controlled by one switch / regulator

All as per item No. 136 above but for (c) One 3 pin socket out let 5 Amps on independent board

All as per item No. 136 above but for (d) one bell/buzzer point controlled by bell push

All as per item No. 136 above but for (e) one 3 pin socket out let 5 A on same board

point wiring complete with 1.5 Sqmm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor conforming to IS 694 drawn through and incl PVC casing and capina ISI marked including accessories surface type wiring including 1.6 etc, all as specified and as directed for the following :- (a) One light point controlled by one switch / regulator

All as per item No. 141 above but for (b) One fan point controlled by one switch / regulator

All as per item No. 141 above but for (c) One 3 pin socket out let 5 Amps on independent board

Point wiring complete with 2.5 Sqmm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor conforming to IS 694 drawn through and incl PVC casing caping ISI marked incl incl accessories surface type wiring run on walls/ ceiling incl MS terminal boxes fabricated with 1.6 mm thick MS sheet concealed on walls with plastic laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch socket outlets, fan regulators etc., incl provision of 2.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed. Note for Item No 138 to 146:- (i) The earth wire for the points in the same circuit can be looped from point to point (ii) Earth wire shall be taken inside the conduit (iii) Cost of terminal box is deemed to be included in the item rate quoted for point wiring (iv) Cost of a circuit of any length of cable from DB to any switch/ socket board to be included in point wiring. (v) Cost of cutting chases for conduits and making good to walls, in case of recessed or concealed conduit wiring will be paid separately in other items.

S&F LED batten suitable for indoor applications 18/20 Watts, 4 feet with extruded aluminium housing & integrated LED channel rectangular white arcylic cover complete with all accessories all as specified and directed. Make: Bajaj, Cat No.BCLAB 18 WH LED P or equivalent Makes & model

S&F LED batten suitable for indoor applications 10 Watts, 2 feet with polycarbonate housing & integrated LED channel rectangular white arcylic cover complete with all accessories all as specified and directed. Make: Bajaj, Cat No.BCLSB 10 WH or equivalent Makes & model

S&F 1 x 1 Surface mounted LED Luminaire 24 Watts white powder coated CRCA housing with LEDs seamless front frame with flate white high transmission arcylic cover complete with all accessories as specified and directed. Make: Bajaj, Cat No : BZSSQL 24W LED WHi or equivalent

Supply and Fix Bedside LED luminaries 03/5 watt as specified and directed.

Supply and Fix Modular switch 1 way 6A,1 module

Supply and fix Modular switch 1 way 16A, 1 module

Supply and fix Modular switch 2 way 6A,1 module

Supply and Fix Modular Bell push 6A 1 module

Supply and fix modular Socket, 6A - 2/3 pin combined 2 module

Supply and fix modular Socket 6A/16A - 2/3 pin combined 2 module,

Supply and fix modular type Fan step regulator, 120W - 2 module

S&F Switch piano flush button single pole two way 5 Amps all as specified and as directed.

S&F of Angle holder PVC/polycarbonate type all as specified and as directed

S&F MCB SPN 240 volts 32 Amps complete all as specified and as directed

S&F MCB single pole 240 volts 6 to 32 Amps complete all as specified and as directed

S&F MCB TPN 415 volts 63 Amps complete all as specified and as directed

S&F MCB DB SPN 8 way double door type 240 volts with 200 Amps rated busbar as specified and as directed.

S&F MCB DB TPN 4way with double door type 415 volts with 200 Amps rated busbar for housing MCBs as specified and as directed.

S&F ceiling rose, surface bakelite type 65 x 50 mm, 2 to 3 terminals all as specified and as directed

S&F MCB DB 12waydouble door type 240Volt with 200 Amps rated busbar as spcified as directed

Removing of existing unservicable one and provision of new MCB single pole 240 volts 5 to 40 Amps complete all as specified and as directed

S&F Ding Dong bell AC 230 volts single pole.

M&L for provision of new sub main wiring 1100 volts grade multistranded FRLS copper conductors, two runs of single core 6 Sqmm along with one run of 6 Sqm PVC insulated single core multistranded copper conductor cable as earth continuity conductor run along with PVC conduit all as specified and as directed Note: 3 runs of cable one un of conduit will be measured as one length.

Removing of old existing unserviceable one and S&F of new sub main wiring 1100 volts grade multistranded FRLS copper conductors, two runs of single core 2.5 Sqmm along with one run of 2.5 Sqm PVC insulated single core multistranded copper conductor cable as earth continuity conductor run along with PVC conduit all as specified and as directed Note: 3 runs of cable one un of conduit will be measured as one length.

M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr connected to galvanized earth lead wire 4 mm dia as earth lead up to 7.5 mtr long by means of nuts, bolts, thimbles,check nuts and washers etc made of galvanized iron connected to earthing test point all as shown in electrical plate No 3 of SSR Part-I 2010 and as specified or indicated and testing on completion incl earth work and excavation in any type of soil PCC (1:3:6) type C1 chamber, pre cost slab 40mm thick in cement concrete (1:2:4) type B1 with 8 mm dia MS bars reinforced at 10 cm centre to centre both ways incl funnel with watering pipe wire mesh and lugs, incl test point complete all as specified and as directed.

S&F 30 W LED bldg security light fitting with pressure die cast housing along with prismatic polycarbonate difuser with IP 66 protection. Make:- Bajaj, Cat No.:- ENXT P 30L WH SY PC SD or Equivalent Makes & model

S&F Bracket made out of GI tubing medium grade 25 mm bore , approx length 1.5 m long including MS clamps made out of MS flat iron 25 x 6 mm , nuts, bolts, washers etc and including before fixing applying two coats of aluminum paint over a coat of red oxide primer complete all as specified and directed.

S&F Single pole & neutral enclosure 20 Amps & 240 V with two pin and earth plug and socket complete with one single pole MCB 20Amps

S&F energy saving ceiling fans, 230 volts, 26 watts, single pole, 1200 mm sweep, high speed of approved colour with remote control and two years warranty certificate from the manufactures, with latest BEE five star rating and BLDC technology all as per Havells Model No:- Efficiencia Neo (BLDC 26W) or techno commercially equivalent models specified in PS complete with down rod and GI hook with welding work, wire connections form ceiling rose to ceiling fans with complete accessories including writing of MES NO with unit name on ceiling fans using approved stencil with synthetic enamal paint complete all as specified and directed.

S&F Storage type water heater 25 Ltrs BEE 5 star rated complete incl steel wired pipe for hot/cold water connection for inlet and out let water etc complete all as specified and directed at site. (Bajaj / Venus / Havells)

S&F Exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louvers fixed outside with all accessories and fixing the exhaust fan from ceiling rose with 3 core flexible copper wire 24/0.20 sqmm , etc all as directed. Make : Bajaj cat No : 70079, MAXX AIR or eqv in Make Havells/CGs/ Orient

Cutting chases, pinning in, where required for concealed conduit wiring, and making good disturbed surfaces to match with adjacent surfaces including pointing in cement mortar 1:3, girth not exceeding 15 cm on brick / PCC block masonry / concrete surfaces, complete all as specified and as directed.

Sup ply & fix Ceiling fans, complete with three blade down rod, accessories 230V1200sweep with Squrrel cage induction Motor

M & L for sand cushioning with a layer of river sand 23 cm thick under and above the cable complete all as specified and as directed

S & L sub class burnt bricks for cable protection complete as specified as directed

S&L XLPE insulated, screened, PVC bedded, galvanised steen strip or wire armouned power cables (heavy duty) with aluminium conductor, 1100 volts grade, cross sectional area 16 Sqmm, 4 core laid in trenches/wall..

S&F GI tubing light grade 40 mm bore with all fitting laid in trenches/walls/Roads for cable protection .

S&F GI tubing light grade 25 mm bore with all fitting laid in trenches/walls/Roads for cable protection.

S&F GI tubing light grade 20 mm bore with all fitting laid in trenches/walls/Roads for cable protection.

S&F of the gun metal Gate valve of size 25 mm dia with iron wheel.

S&F float valve of size 20 mm dia with PVC body aluminium float rod, nylon float high presure type (Make:- Prayag).

Karthick Constructions

PRANAVI CONSTRUCTION

RAJINDER SINGH RATAN

PRACHANIVA CONSTRUCTIONS

ADWITHI

S S BUILDERS

Atom Engineers and Builders