Loading
Loading…
New
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Ref. No.
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | M D TRADERSLikely winner L1₹38.5 LQualified GARH ROAD MEERUT 2845 250004 INDIA | MEERUT | UTTAR PRADESH | 250004 | L1 | Qualified MSE, MII, Category: General | |
| 2 | L2₹62.1 L+₹23.6 L (61.4%)Qualified 102 SAI SRINIVASAM PRASHANTH ENCLAVE JEEDIMETLA HYDERABAD TELANGANA 500067 | MEDCHAL MALKAJGIRI | TELANGANA | 500067 | L2 | Qualified MII | |
| 3 | L3₹65.2 L+₹26.8 L (69.7%)Qualified | L3 | Qualified MSE, MII, Category: General | |
| 4 | L4₹76.7 L+₹38.3 L (99.5%)Qualified | L4 | Qualified MSE, MII, Category: General | |
| 5 | L5₹80.9 L+₹42.4 L (110.3%)Qualified | L5 | Qualified MSE, MII, Category: General |
Tender Value
Refer Docs
EMD Value
Exempted
Closing Date
14 Jan 2025, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
APPLICATION A FOR DIA 10.0 MM BALL MILL CUTTER.
BALL MILL CUTTER CUTTER DIA 12.0 MM SHANK DIA 12.0 MM TOTAL LENGTH 120MM NO. OF FLUTE 1
INSERT NOSE RADIUS 6.0 APPLICATION A FOR DIA 12.0 MM BALL MILL CUTTER.
FACE MILL CUTTER CUTTER DIA 50.0 MM BORE DIA 22.0 MM NO. OF FLUTE 5
INSERT NOSE RADIUS 0.8 APPLICATION A FOR FACE MILL CUTTER DIA 50.0 MM
FACE MILL CUTTER CUTTER DIA 63.0MM BORE DIA 22.0MM NO. OF FLUTE 6
INSERT NOSE RADIUS 0.8 APPLICATION A FOR FACE MILL CUTTER DIA 63.0MM
FACE MILL CUTTER CUTTER DIA 80.0MM BORE DIA 27.0MM NO. OF FLUTE 6
INSERT NOSE RADIUS 0.8 APPLICATION A FOR FACE MILL CUTTER DIA 80.0MM
DIA. 2.0MM END MILL OAL 39
DIA. 2.5MM END MILL OAL 39
DIA. 3.0MM END MILL OAL 39
DIA. 4.0MM END MILL OAL 51
DIA. 5.0MM END MILL OAL 51
DIA. 6.0MM END MILL OAL 64
DIA. 8.0MM END MILL OAL 64
DIA. 10.0MM END MILL OAL 70
DIA. 12.0MM END MILL OAL 76
DIA. 14.0MM END MILL OAL 89
DIA. 16.0MM END MILL OAL 89
DIA. 6.0MM END MILL OAL 75
DIA. 8.0MM END MILL OAL 75
DIA. 10.0MM END MILL OAL 100
DIA. 12.0MM END MILL OAL 100
DIA. 5.0MM BALL NOSE OAL 57
DIA. 6.0MM BALL NOSE OAL 57
DIA. 8.0MM BALL NOSE OAL 63
DIA. 10.0MM BALL NOSE OAL 72
DIA 1.5MM PARALLEL SHANK DRILL FLUTE LENGTH 19MM OAL 40MM.
DIA 1.6MM PARALLEL SHANK DRILL FLUTE LENGTH 21MM OAL 43MM.
DIA 1.8MM PARALLEL SHANK DRILL FLUTE LENGTH 23MM OAL 46MM.
DIA 2.0MM PARALLEL SHANK DRILL FLUTE LENGTH 24MM OAL 49MM.
DIA 2.5MM PARALLEL SHANK DRILL FLUTE LENGTH 30MM OAL 57MM.
DIA 2.8MM PARALLEL SHANK DRILL FLUTE LENGTH 33MM OAL 61MM.
DIA 3.0MM PARALLEL SHANK DRILL FLUTE LENGTH 33MM OAL 61MM.
DIA 3.2MM PARALLEL SHANK DRILL FLUTE LENGTH 36MM OAL 65MM
DIA 3.3MM PARALLEL SHANK DRILL FLUTE LENGTH 36MM OAL 65MM
DIA 3.5MM PARALLEL SHANK DRILL FLUTE LENGTH 39MM OAL 70MM
DIA 3.8MM PARALLEL SHANK DRILL FLUTE LENGTH 43MM OAL 75MM
DIA 4.0MM PARALLEL SHANK DRILL FLUTE LENGTH 43MM OAL 75MM
DIA 4.2MM PARALLEL SHANK DRILL FLUTE LENGTH 43MM OAL 75MM
DIA 4.5MM PARALLEL SHANK DRILL FLUTE LENGTH 47MM OAL 80MM
DIA 4.8MM PARALLEL SHANK DRILL FLUTE LENGTH 52MM OAL 86MM
DIA 5.0MM PARALLEL SHANK DRILL FLUTE LENGTH 52MM OAL 86MM
DIA 5.8MM PARALLEL SHANK DRILL FLUTE LENGTH 57MM OAL 93MM
DIA 6.0MM PARALLEL SHANK DRILL FLUTE LENGTH 57MM OAL 93MM
DIA 6.5MM PARALLEL SHANK DRILL FLUTE LENGTH 63MM OAL 101MM
DIA 6.7MM PARALLEL SHANK DRILL FLUTE LENGTH 63MM OAL 101MM
DIA 6.8MM PARALLEL SHANK DRILL FLUTE LENGTH 69MM OAL 109MM
DIA 7.0MM PARALLEL SHANK DRILL FLUTE LENGTH 69MM OAL 109MM
DIA 7.8MM PARALLEL SHANK DRILL FLUTE LENGTH 75MM OAL 117MM
DIA 8.0MM PARALLEL SHANK DRILL FLUTE LENGTH 75MM OAL 117MM
DIA 8.5MM PARALLEL SHANK DRILL FLUTE LENGTH 75MM OAL 117MM
DIA 9.0MM PARALLEL SHANK DRILL FLUTE LENGTH 75MM OAL 117MM
DIA 9.8MM PARALLEL SHANK DRILL FLUTE LENGTH 87MM OAL 133MM
DIA 10.0MM PARALLEL SHANK DRILL FLUTE LENGTH 87MM OAL 133MM
DIA 10.2MM PARALLEL SHANK DRILL FLUTE LENGTH 87MM OAL 133MM
DIA 10.5MM PARALLEL SHANK DRILL FLUTE LENGTH 87MM OAL 133MM
DIA 11.0MM PARALLEL SHANK DRILL FLUTE LENGTH 94MM OAL 142MM
DIA 11.8MM PARALLEL SHANK DRILL FLUTE LENGTH 94MM OAL 142MM
DIA 12.0MM PARALLEL SHANK DRILL FLUTE LENGTH 101MM OAL 151MM Bid Details 2/62
DIA 12.5MM PARALLEL SHANK DRILL FLUTE LENGTH 101MM OAL 151MM
DIA 13.0MM PARALLEL SHANK DRILL FLUTE LENGTH 101MM OAL 151MM
DIA 13.5MM PARALLEL SHANK DRILL FLUTE LENGTH 108MM OAL 160MM
DIA 13.8MM PARALLEL SHANK DRILL FLUTE LENGTH 108MM OAL 160MM
DIA 14.0MM PARALLEL SHANK DRILL FLUTE LENGTH 108MM OAL 160MM
DIA 5.0MM PARALLEL SHANK REAMER FLUTE LENGTH 56MM OAL 86MM
DIA 6.0MM PARALLEL SHANK REAMER FLUTE LENGTH 56MM OAL 93MM
DIA 8.0MM PARALLEL SHANK REAMER FLUTE LENGTH 74MM OAL 117MM
DIA 10.0MM PARALLEL SHANK REAMER FLUTE LENGTH 86MM OAL 133MM
DIA 12.0MM PARALLEL SHANK REAMER FLUTE LENGTH 104MM OAL 151MM
DIA 14.0MM PARALLEL SHANK REAMER FLUTE LENGTH 108MM OAL 160MM
DIA 8.0MM PCD END MILL CUTTER OAL 100
DIA 10.0MM PCD END MILL CUTTER OAL 100
DIA 12.0MM PCD END MILL CUTTER OAL 100
DIA 16.0MM PCD END MILL CUTTER OAL 150
DIA 8.0MM PCD BALL END MILL CUTTER OAL 100
DIA 10.0MM PCD BALL END MILL CUTTER OAL 100
DIA 12.0MM PCD BALL END MILL CUTTER OAL 100
DIA 16.0MM PCD BALL END MILL CUTTER OAL 150
7156168
GEM/2024/B/5623529
Two Packet Bid
STRAIGHT SHANK END MILL CUTTER CUTTER DIA 8.0MM
180 days
Hyderabad, Telangana
Total value wise evaluation
BOQ
3 documents required · 3 mandatory
Exempted
24 Dec 2024
24 Dec 2024
14 Jan 2025
APPLICATION A FOR DIA 10.0 MM BALL MILL CUTTER.
BALL MILL CUTTER CUTTER DIA 12.0 MM SHANK DIA 12.0 MM TOTAL LENGTH 120MM NO. OF FLUTE 1
INSERT NOSE RADIUS 6.0 APPLICATION A FOR DIA 12.0 MM BALL MILL CUTTER.
FACE MILL CUTTER CUTTER DIA 50.0 MM BORE DIA 22.0 MM NO. OF FLUTE 5
INSERT NOSE RADIUS 0.8 APPLICATION A FOR FACE MILL CUTTER DIA 50.0 MM
FACE MILL CUTTER CUTTER DIA 63.0MM BORE DIA 22.0MM NO. OF FLUTE 6
INSERT NOSE RADIUS 0.8 APPLICATION A FOR FACE MILL CUTTER DIA 63.0MM
FACE MILL CUTTER CUTTER DIA 80.0MM BORE DIA 27.0MM NO. OF FLUTE 6
INSERT NOSE RADIUS 0.8 APPLICATION A FOR FACE MILL CUTTER DIA 80.0MM
DIA. 2.0MM END MILL OAL 39
DIA. 2.5MM END MILL OAL 39
DIA. 3.0MM END MILL OAL 39
DIA. 4.0MM END MILL OAL 51
DIA. 5.0MM END MILL OAL 51
DIA. 6.0MM END MILL OAL 64
DIA. 8.0MM END MILL OAL 64
DIA. 10.0MM END MILL OAL 70
DIA. 12.0MM END MILL OAL 76
DIA. 14.0MM END MILL OAL 89
DIA. 16.0MM END MILL OAL 89
DIA. 6.0MM END MILL OAL 75
DIA. 8.0MM END MILL OAL 75
DIA. 10.0MM END MILL OAL 100
DIA. 12.0MM END MILL OAL 100
DIA. 5.0MM BALL NOSE OAL 57
DIA. 6.0MM BALL NOSE OAL 57
DIA. 8.0MM BALL NOSE OAL 63
DIA. 10.0MM BALL NOSE OAL 72
DIA 1.5MM PARALLEL SHANK DRILL FLUTE LENGTH 19MM OAL 40MM.
DIA 1.6MM PARALLEL SHANK DRILL FLUTE LENGTH 21MM OAL 43MM.
DIA 1.8MM PARALLEL SHANK DRILL FLUTE LENGTH 23MM OAL 46MM.
DIA 2.0MM PARALLEL SHANK DRILL FLUTE LENGTH 24MM OAL 49MM.
DIA 2.5MM PARALLEL SHANK DRILL FLUTE LENGTH 30MM OAL 57MM.
DIA 2.8MM PARALLEL SHANK DRILL FLUTE LENGTH 33MM OAL 61MM.
DIA 3.0MM PARALLEL SHANK DRILL FLUTE LENGTH 33MM OAL 61MM.
DIA 3.2MM PARALLEL SHANK DRILL FLUTE LENGTH 36MM OAL 65MM
DIA 3.3MM PARALLEL SHANK DRILL FLUTE LENGTH 36MM OAL 65MM
DIA 3.5MM PARALLEL SHANK DRILL FLUTE LENGTH 39MM OAL 70MM
DIA 3.8MM PARALLEL SHANK DRILL FLUTE LENGTH 43MM OAL 75MM
DIA 4.0MM PARALLEL SHANK DRILL FLUTE LENGTH 43MM OAL 75MM
DIA 4.2MM PARALLEL SHANK DRILL FLUTE LENGTH 43MM OAL 75MM
DIA 4.5MM PARALLEL SHANK DRILL FLUTE LENGTH 47MM OAL 80MM
DIA 4.8MM PARALLEL SHANK DRILL FLUTE LENGTH 52MM OAL 86MM
DIA 5.0MM PARALLEL SHANK DRILL FLUTE LENGTH 52MM OAL 86MM
DIA 5.8MM PARALLEL SHANK DRILL FLUTE LENGTH 57MM OAL 93MM
DIA 6.0MM PARALLEL SHANK DRILL FLUTE LENGTH 57MM OAL 93MM
DIA 6.5MM PARALLEL SHANK DRILL FLUTE LENGTH 63MM OAL 101MM
DIA 6.7MM PARALLEL SHANK DRILL FLUTE LENGTH 63MM OAL 101MM
DIA 6.8MM PARALLEL SHANK DRILL FLUTE LENGTH 69MM OAL 109MM
DIA 7.0MM PARALLEL SHANK DRILL FLUTE LENGTH 69MM OAL 109MM
DIA 7.8MM PARALLEL SHANK DRILL FLUTE LENGTH 75MM OAL 117MM
DIA 8.0MM PARALLEL SHANK DRILL FLUTE LENGTH 75MM OAL 117MM
DIA 8.5MM PARALLEL SHANK DRILL FLUTE LENGTH 75MM OAL 117MM
DIA 9.0MM PARALLEL SHANK DRILL FLUTE LENGTH 75MM OAL 117MM
DIA 9.8MM PARALLEL SHANK DRILL FLUTE LENGTH 87MM OAL 133MM
DIA 10.0MM PARALLEL SHANK DRILL FLUTE LENGTH 87MM OAL 133MM
DIA 10.2MM PARALLEL SHANK DRILL FLUTE LENGTH 87MM OAL 133MM
DIA 10.5MM PARALLEL SHANK DRILL FLUTE LENGTH 87MM OAL 133MM
DIA 11.0MM PARALLEL SHANK DRILL FLUTE LENGTH 94MM OAL 142MM
DIA 11.8MM PARALLEL SHANK DRILL FLUTE LENGTH 94MM OAL 142MM
DIA 12.0MM PARALLEL SHANK DRILL FLUTE LENGTH 101MM OAL 151MM Bid Details 2/62
DIA 12.5MM PARALLEL SHANK DRILL FLUTE LENGTH 101MM OAL 151MM
DIA 13.0MM PARALLEL SHANK DRILL FLUTE LENGTH 101MM OAL 151MM
DIA 13.5MM PARALLEL SHANK DRILL FLUTE LENGTH 108MM OAL 160MM
DIA 13.8MM PARALLEL SHANK DRILL FLUTE LENGTH 108MM OAL 160MM
DIA 14.0MM PARALLEL SHANK DRILL FLUTE LENGTH 108MM OAL 160MM
DIA 5.0MM PARALLEL SHANK REAMER FLUTE LENGTH 56MM OAL 86MM
DIA 6.0MM PARALLEL SHANK REAMER FLUTE LENGTH 56MM OAL 93MM
DIA 8.0MM PARALLEL SHANK REAMER FLUTE LENGTH 74MM OAL 117MM
DIA 10.0MM PARALLEL SHANK REAMER FLUTE LENGTH 86MM OAL 133MM
DIA 12.0MM PARALLEL SHANK REAMER FLUTE LENGTH 104MM OAL 151MM
DIA 14.0MM PARALLEL SHANK REAMER FLUTE LENGTH 108MM OAL 160MM
DIA 8.0MM PCD END MILL CUTTER OAL 100
DIA 10.0MM PCD END MILL CUTTER OAL 100
DIA 12.0MM PCD END MILL CUTTER OAL 100
DIA 16.0MM PCD END MILL CUTTER OAL 150
DIA 8.0MM PCD BALL END MILL CUTTER OAL 100
DIA 10.0MM PCD BALL END MILL CUTTER OAL 100
DIA 12.0MM PCD BALL END MILL CUTTER OAL 100
DIA 16.0MM PCD BALL END MILL CUTTER OAL 150
MILLING TOOLS AND HOLDERS
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
bid_7156168.pdf
GEM_BID
OTHER
list-of-categories-where-trials-are-allowed_1712126171.pdf
OTHER
gtc.pdf
OTHER
specs_2024-11-19-14-34-16_ee82d61e321792c1b367ac3b534bb394.pdf
BOQ
boq057_2024-11-19-14-34-16_32db7ee022cc26ac586e9170e9a5e0b0.csv.pdf
BOQ
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .