Loading
Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹1.3 Craccepted-finance | ₹1.3 Cr | accepted-finance |
Tender Value
₹1.3 Cr
EMD Value
₹2 L
Closing Date
13 Apr 2026, 11:00 pmClosed
Minor Irrigation Department
EXECUTIVE ENGINEER
Repairs & Restoration of Kadlapur Small Tank near Kadlapur Village in Sedam Taluka Kalaburagi District (Under 4702 MOT for the year 2025-26)
MI/2025-26/IW/WORK_INDENT11406
MI/2025-26/IW/WORK_INDENT11406
Open
Irrigation and Other Works
Two Tender Document System(Two Cover)
Minor Irrigation Division Kalaburagi
11 documents required · 11 mandatory
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
Satisfactorily completed (at least 90% of the contract value), similar nature of work from a single contract such as Construction/Improvement of Tank of value not less than Rs. 63.47 Lakhs during the last five years (2020-21 to 2024-25). The value of the completed work shall be given a weight of 10% per year to bring them to the price level of FY 2025-26.The work done certificate should be obtained duly Signed from an Officer not below the rank of Executive Engineer of the concerned division
The intending bidder should have executed a minimum Quantity of the following Items as stated below in any one year in during last five years (2020-21 to 2024-25). The work done certificate should be obtained duly signed from an Officer not below the rank of Executive Engineer 1. Earth work (Excavation and Embankment Quantity): 5711.00 Cum 2. Cement Concrete Quantity: 818.00 Cum 3. Reinforcement Steel: 17.37 Tonne 4. Pitching/Revetment: 1178.00 Sqm
List of Existing Commitments and ongoing works in all departments
Section 3 Qualification Information as per bid document
Liquid assets and /or availability of credit facilities of no less than Rs. 80.85 Lakhs (Credit lines/ letter of credit/ certificates from banks) for meeting the fund requirement etc.
Achieved in at least two financial years during last 5 years (i.e., 2020-21 to 2024-25) Minimum financial turnover (in all classes of civil engineering construction works only) of Rs. 253.88 Lakhs should not be less than Two times the Estimated Annual Payments under this contract. Financial turnover of previous years will be given a weightage of 10% per year to bring them to price level of FY 2025-26.
Tenderers who meet the specified minimum qualifying criteria will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity (AxNx1.5-B), Where A is Maximum value of civil engineering works executed in any one year during the last five years i.e.2020-21 to 2024-25 (updated to 2025-26 price level) taking into account the completed as well as works in progress. N is Number of years (0.5 years) prescribed for completion of the works for which tenders are invited. B is Value, at 2025-26 price level, of existing commitments and ongoing works to be completed during the next 0.5 years (6 Calendar months) Note: The statements showing the value of existing commitments and ongoing works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent.
A copy of valid KPWD Class III and above registration certificate of individual bidder should be uploaded
₹3,180
₹2 L
13 Apr 2026
31 Mar 2026
15 Apr 2026
10 Apr 2026
9 Apr 2026
1st month
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness in area of light jungle with all lead and lift, etc. complete and as per the direction of the Engineer-in-charge.
Cutting and burning or disposing off Apu/ Jondu from marshy areas as directed with all other ancillary operations with all lead and lift, etc. complete and as per the direction of the Engineer-in-charge.
Cutting and removing jauliflora bushes upto 1.50 m girth excluding removal of stumps and including burning or disposing off the materials with all lead and lift, etc. complete and as per the direction of the Engineer-in-charge.
Demolishing stone rubble masonry manually/ by mechanical means in cement mortar including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area with all lead and lift, etc. complete and as per the direction of the Engineer-in-charge.
Providing cohesive non-swelling (CNS) soil lining to canals using soil from borrow area including cost of all materials, labour, machinery, spreading soil in layers of thickness not more than 150 mm, breaking clods, levelling, watering, compacting to density control of not less than 95 percent or as stipulated, dressing to required profile and all other ancillary operations with all lead and lift, etc. complete and as per the direction of the Engineer-in-charge.
Providing and laying in position cement concrete mix 1:4:8 using 40 mm nominal size graded crushed coarse aggregates for levelling course for all works in foundation. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required with all lead and lift, etc. complete and as per the direction of the Engineer-in-charge.
Providing and laying insitu vibrated M-20 grade cement concrete using 40 mm down approved, clean, hard, graded aggregates for bed lining of canal including cost of all materials, machinery, labour, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing with all other ancillary operations with all lead and lift, etc. complete and as per the direction of the Engineer-in-charge.
Providing and laying insitu vibrated M-20 grade cement concrete using 20 mm down approved, clean, hard, graded aggregates for side lining of canal including cost of all materials, machinery, labour, cleaning, batching, mixing, supports, placing in position, levelling, vibrating, finishing junction of bed and sides to required curvature, finishing side slopes, curing with all other ancillary operations with all lead and lift, etc. complete and as per the direction of the Engineer-in-charge.
Supplying, fitting and placing TMT FE550/ 550D steel reinforcement for canal & allied works including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, lapping/ welding joints, tying with binding wire/ soft annealed steel wire and other ancillary operations complete with all lead and lift, etc. complete and as per the direction of the Engineer-in-charge.
Providing and laying in position cement concrete M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for all foundation of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances with all lead and lift, etc. complete and as per the direction of the Engineer-in-charge.
Providing centering, shuttering, formwork, scaffolding, with all lead and lift, etc. complete and as per the direction of the Engineer-in-charge.
Providing and laying in position cement concrete M25 design mix using 20 mm nominal size graded crushed coarse aggregates for all sub structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required with all lead and lift, etc. complete and as per the direction of the Engineer-in-charge.
Providing centering, shuttering, formwork, scaffolding, with all lead and lift, etc. complete and as per the direction of the Engineer-in-charge.
Supplying, fitting and placing TMT FE550/ 550D steel reinforcement for other type of structures including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, lapping/ welding joints, tying with binding wire/ soft annealed steel wire and other ancillary operations with all lead and lift, etc. complete and as per the direction of the Engineer-in-charge.
Fabrication, supply, erection, testing and commissioning of sliding type vertical lift gate consisting of skin plate, horizontal and vertical stiffeners, seal seats, sponge rubber seals lifting handles & all necessary works with all accessories for vented dam/ field channel including cost of all materials, labour, cutting, aligning, welding, finishing, cleaning, applying two coats of anti-corrosive bituminous black paint over a coat of zinc chromate red oxide specifications and primer paint, seal fixing & all necessary works complete as per approved drawings with all lead and lift, etc. complete and as per the direction of the Engineer-in-charge.
De-silting in tank bed/ Feeder Channel/Canal in dry condition by excavating the deposited bed material and disposing off the same by stacking/ formation of Embankment or as directed including cost of all machinery, labour with all lead and lift, etc. complete and as per the direction of the Engineer-in-charge.
Re-constructing the cut open bund portion, for forming temporary diversion channel, using soil obtained from bund cutting in layers of 150 to 200 mm thickness before compaction including cost of all labour, materials, machinery, all operations such as sorting out, spreading in layers of specified thickness, breaking clods, sectioning, watering, compacting each layer to density control of not less than 95 percent or as directed using mechanical tampers or by manual labour & all necessary works with all lead and lift, etc. complete and as per the direction of the Engineer-in-charge.
Providing and laying in position cement concrete M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for all super structures of building, Road works, water works, irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required with all lead and lift, etc. complete and as per the direction of the Engineer-in-charge.
Providing hearting/ casing embankment using homogeneous approved soil from borrow areas in layers of 250 to 300 mm (before compaction) including cost of all materials, machinery, labour, all other operations such as collection of soil, spreading soil in layer of specified thickness, sorting out, breaking clods, levelling, sectioning edges/ sides, watering, compacting each layer to density control of not less than 95 percent or as stipulated using power roller and all other ancillary operations with all lead and lift, etc. complete and as per the direction of the Engineer-in-charge.
Providing new embankment abutting to existing bund to strength the existing bund using soil from approved borrow area in layers of 200 to 250 mm and compacting each layer to density control of not less than 95 percent by vibrating plate compactor or pneumatic tamper including cost of all materials, machinery, labour, picking previous layer, spreading soil in layer, breaking clods, watering & all necessary with all lead and lift, etc. complete and as per the direction of the Engineer-in-charge.
Providing and constructing 300 mm thick dry rubble stone pitching with pin headers at 2 per Sqm using stones and stone chips from approved source including cost of all materials, labour, hand packing/ wedging stone chips, finishing, and all other ancillary operations with all lead and lift, etc. complete and as per the direction of the Engineer-in-charge.
Providing and laying 750 mm dia reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry with all lead and lift, etc. complete and as per the direction of the Engineer-in-charge.
Total
Cumulative Milestone
The liquidated damages
For Milestone 1:
For Milestone 2:
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
MS-KADLA-T final.xlsx
Others - MILESTONE • 0.02 MB
Bid_Document_Kadlapur Small Tank.doc
Tender Document • 20.67 MB
Detailed_Specification.doc
Others - SPECIFICATIONS • 0.75 MB
DRAWINGS.pdf
Others - DRAWINGS • 1.54 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .