M and R to NRB and Nashik Satpur Industrial Area Repairing and renovation Rs 4002049

Amount

Repairing & renovation of furniture for General Suites at Guest House in CSC building, Satpur.

Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete

Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete.

Removing ventilators and small windows with frame and stacking the materials with all leads, lifts etc. complete.

Removing of all plumbing units such as c.p. fittings, ceramic fittings, pipes, nanhi traps, cocks, downtake pipes etc and stacking the serviceable materials as directed and disposing of unserviceable materials with all leads and lifts etc. complete.

Removing of all furnitures/storage units such as tables, chairs, cupboard etc. and stacking the servicable materials as directed and disposing of unservicable materials with all leads and lifts etc. complete.

Demolishing waterproofing/brick bat by manually/ by mechanical means including disposal of unserviceable material with all lead and lifts as per direction of Engineer-in-charge.

Dismantling flat wooden or A.C. Sheet ceiling with frame work including stacking the materials as directed with all leads, lifts etc. complete.

Core cutting in existing RCC wall or slab upto 200 mm dia and upto 300 mm deep.

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete.

Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete. (Rates excluding GST)

Providing and laying vitrified stone effect finish tiles having size 590 to 605 mm of 8 to 10 mm thickness and confirming to IS 15622-2006 (Group Bla) of approved make shade and pattern for flooring in required position laid on a bed of 1:4cement mortar including neat cement flaot, filling joints with epoxy grouting, grouting, spacers curing and cleaning etc. complete.

Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete.

Providing and laying telephone black / Amba White / Cadbury brown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete. (Rates excluding GST)

Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 mm x 450 mm size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 mm thick supports with kadappah top 35 to 40 mm thick and polished granite 16 to 20 mm top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 cm height and top granite of 75 x 40 cm including cutting, opening for sink of required size in kadappah as well as granite etc. complete. (Platform top size 5.00 m x 0.60 m and height is 0.75 m) (Rates excluding GST)

Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 Kilogram/bag of cement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc. complete. (Rates excluding GST)

Providing and applying plaster / wall punning with plaster of paris (with plaster of paris material) in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete. (Rates excluding GST)

Providing and fixing in position Gypsum board false ceiling with 12.5 mm thick Gypsum boards, screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete.

Providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete.

Providing and applying Royale Luxury Emulsion of approved make on internal wall surface as detailed below Scrapping for surface with emery paper and wipe clean for area. wall primer with brush by adding mineral turpentine oil by 8 to 10 % or water by 15 to 20% allowing to dry for 6 to 8 hoursAfter applying acrylic wall putty with appropriate prpportion of water of allow to dry for period of 4 to 6 hours of activity. Scrapping with emery paper and wipe clean Applying paints Royale Luxury emulsion 1st coat with brush water content water 40 to 45% or 65 to 70% by role Applying paints Royale luxury emulsion 2nd coat with brush with water content 40 to 45% or 65 to 70 % by roller. (With prior approval of S.E.)

Providing and applying two coats of textured synthetic paint of approved shade and quality and one coat of primer before applying textured paint including scaffolding if necessary preparing surface by thoroughly cleaning oil, grease, dirt and other materials as required, etc. complete.

Providing and fixing in position 19 mm thk. plywood for soffit/wooden ceiling with approved finished including required teak wood frames, supports & mouldings, with exposed sides finished with melamine polish. Item to be completed in all respects as per drawings & instructions from Engineer In Charge.

Providing and fixing Wooden rafter / Jamb linings at all height including providing and fixing of aluminum frame work and rafter made up of ply using 9/12/19 mm with Laminate finish complete hardware fitting etc complete as per directions of Engineer in charge.

Size 50x50x1.62mm

Size 50x25x1.62mm

9 mm thick Marine grade Plywood (conforming IS: 710 (2010))

12 mm thick Marine grade Plywood (conforming IS: 710 (2010))

19 mm thick Marine grade Plywood (conforming IS: 710 (2010))

Providing and fixing 1.5 MM thick group matching Laminate of approved quality and make, of required size and width as per site condition including surface preparation pasting with approved adhesive and finishing it evenly to get flat surface. The cost of openings for switches, AC Facia, any other cutout etc. shall be included in the rates quoted. complete as per detail drawing & directions by Architect. No extra payment will be made towards providing any pattern.

Low height storage with laminate finish (LST)

Full height storage with laminate finish (FST)

Size 50 X 12 mm

Size 50 X 20 mm

SIZE 15 X 15 MM

SIZE 25 X 50 MM

Providing & arranging in position Double Bed 1800 x 1950 x 450 mm made out of B.T.C. Wood frame of required size and 19 mm thk ply wood boxing as per the design along with 650 mm high head board. All exposed surface covered with decorative veneer and finished with melamine polish all complete along with required hardware with matress. etc complete as per direction of Engineer - in - Charge.

Providing & arranging in position Single Bed 900 x 1950 x 450 mm made out of B.T.C. Wood frame of required size and 19 mm thk ply wood boxing as per the design along with 650 mm high head board. All exposed surface covered with decorative veneer and finished with melamine polish all complete along with required hardware with matress. etc complete as per direction of Engineer - in - Charge.

Bed side Table (size 450 x 450 x 450 mm) made out of 12 mm ply for sides, top, shelves, shutter as well as drawer front and 6 mm ply for back. All exposed side covered by decorative veneers and finished with melamine polish on all exposed side. The side tables cost to include the cost of all required hardware like handle, drawer slides, etc. complete as per direction of Engineer - in - Charge.

Providing & arranging in position Coffee tables made out of Granite top and S S stand with proper joinery & hardware as per drawing the top finished with bevelled edges. Item to be completed in all respect as per drawing & instructions from Engineer-in-charge.

Square/circular corner Table - Providing & arranging in position centre tables made out of TW members 40X75 mm with proper joinert & hardware as per drawing. The top finished with 12mm thk. tinted glass with bevelled edges. Item to be completed in all respect as per drawing & instruction from E.I.C. of given size & shape.

Providing & installation of Dressing table 450 mm deep made out of 12 mm ply wood for sides , shelves, top, shutter, drawer fronts etc. & 6 mm ply at back, Partly glazed / partly Solid shutter unit covered by decorative veneer and finished with melamine polish on all exposed surface. All inclusive of required Hardware like drawer slides, hinges, handle lock etc. all complete. with out Mirror etc complete as per direction of Engineer - in Charge.

Providing & installation of Study table 450 mm deep made out of 12 mm ply wood for sides , shelves, top, shutter, drawer fronts etc. & 6 mm ply at back, Partly glazed / partly Solid shutter unit covered by decorative veneer and finished with melamine polish on all exposed surface. All inclusive of required Hardware like drawer slides, hinges, handle lock etc. all complete with out Mirror etc. complete as per direction of Engineer - in Charge.

Providing & arranging in position centre tables made out of TW members 40X75 mm with proper joinert & hardware as per drawing. The top finished with 12mm thk. tinted glass with bevelled edges. Item tobe completed in all respect as per drawing & instruction from E.I.C. of given size & shape.

Providing and fixing in position TV cabinet with revolving platform with steel square feet located on lower cabinet which made out of 19mm thick marine plywood for top, bottom, sides, 6mm thick marine plywood for back and 12mm thick marine plywood for shelfs(1 No). All exposed surfaces to be finished with combination of veneer, alongwith 3 coats of melamine polish and all internal surfaces to be finished with 1.0mm thick laminate, rest of the portion of ply finished with 2 coats of french polish. The shutters to be made out of 12mm thick marine plywood finished with veneer on exposed side and 1.0mm thick laminate for internal sides. Item to be completed as per drawing and site directions. Item to include all types of hardwares, locks, S.S. handles, tower bolts, ball catches, wooden lipping, beading, inlay patti and moulding etc. complete as per site directions.

c) Three Seater Sofa

Providing and Supplying Mid Back Study Chair of model Spyder of Godrej make or equivalent to it etc. complete as per direction of Engineer - in - charge.

Providing and Supplying Dressing Chair of Godrej make or equivalent to it etc. complete as per direction of Engineer - in - charge.

Providing and fixing Indian teak wood joists and girders in timber floors of single, double or framed type including scaffolding if necessary, and one coat of primer etc. complete.

Providing & fixing 35mm thk. Phenol bonded Flush door finish with 1.5mm thk. Laminate on both sides as per approved pattern. All edges should finish with teak wood lipping with melamine polish. All complete as per instructions & approval of EIC. Note: The rate of all doors shall include all hardware such as door handles, hinges, door closures/floor spring, dead lock, PVC door buffer,door stopper, latches etc. as required.

Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing 2 way BIB cock with wall flange of approved make including necessary sockets/union nut etc. complete as directed by Engineer-in-charge. (Jaquar- FON-40041)

Providing and fixing Hand shower (health faucet) with 8mm dia. 1.2m long flexible tube having wall hook with approved make including necessary sockets/ union nut etc. complete as directed by Engineer-in-charge. (Jaquar- ALD-577)

Providing and fixing Table top white wash basin of size 120x635x405mm rubber plugs and brass chain, C.P.Angular stop cock long thread, continental including S.S. bottle trap of approved make having necessary pipe connection up to the outside face of the wall.etc. complete as directed by Engineer in charge.

Providing and fixing white european type wall-hung, Size 360mm x 360mm x 575 mm with flush valve having flow rate up to 6.0 Litr/Minute of Jaquar/Cera/Hindware /Perryware or equivalent make including PVC soil pipe, vent pipe upto outside face of wall, 100mm dia PVC plug bend inlet pipe all fittings,cutting & making good walls, floors etc as directed by Engineer in charge.( Make shall conform to manufacturer's Green product and shall got approved from the Engineer In Charge.) (Rate excluding GST)

Providing and Fixing of Mirrors in Toilets of approved Indian quality, copper plated with 10 mm thick plywood backing in the masonry etc. complete as per direction of Engineer- in - Charge.

Providing and Fixing Rollar Blinds AMI Make or approved make & shade of 38mm round Aluminium channel with Blackout fabric & telting with chain (Ball) system with all necessary fixtures and fitting etc. complete. (Sample to be final by Engineer In-charge prior execution of work) (Rate excluding GST)

b) Powder Coated

Providing and fixing 10 cm PVC nahani trap with grating etc. complete.

Providing and fixing C.P. Angular stop cock with wall flange of approved make continental including necessary sockets/union nut etc. complete.(Rate excluding GST)

Providing and fixing divertor with overhead shower, showerarm, spout, handshower with wall bracket having flow rate upto 12 liters / minutes of Jaquar / Cera / Hindware / Perryware or equivalent make including all necessary pipes, fittings etc. complete as directed by Engineer In Charge. (Rate excluding GST)

Providing and fixing Glass self 125 mm wide and 600 mm long with necessary chromium plated brackets providing T.W.gutties etc. complete

Providing & Fixing Towel Ring of best quality as approved by Engineer-in-charge.

Providing & Fixing Towel Rack of best quality as approved by Engineer-in-charge.

Providing & Fixing Coat Hooks of best quality as approved by Engineer-in-charge.

Providing & Fixing Paper holder of best quality as approved by Engineer-in-charge.

Providing & Fixing Soap Dish of of best quality as approved by Engineer-in-charge.

Providign & Fixing 12mm thk Toughened Glass Partitions in VIP Toilets with all types of D Brackets, Hardwares etc complete

Artificial plants

Picture Frame

Preparing layout, drawings, plans, detail drawings, colour combinations, sample chart preparation etc. All designing work required for the work including the preparation of electrical layout all complete.

Rebate for existing old Furniture.

Rebate for existing old door shutters with door frames, aluminum window & ventilators with frames & glass etc. dismantled materials.

Vedanta Interiors (BID ID -6900256)

Mahendra And Co (BID ID -6901226)

Aryan Interiors (BID ID -6901234)