PERIODICAL SERVICES INTERNAL WIRING AND OTHER ALLIED WORKS AT MD ACCN AT SSV SKV MANOJ PANDEY VIHAR OLD DSTV AND TARANJUBARI AREA UNDER AGE BR I OF GE SUKNA

Amount

Cleaning of vegetation/roots from roof, slab, wall, chajja etc and digging out roots etc and filling holes and making good disturbed portion with PCC 1:2:4 type B0 or cement mortar 1:3 complete all as specified and directed.

M&L in repairs broken/damaged RCC chajjas by making good with PCC 1:2:4 type B1 or rendering 15 mm thick in cement mortar 1:4 mixed with water proofing compound to top and sides and rendering 5 mm thick to soffits in cement mortar 1:3 including necessary form work, reinforcement duly welded if required including demolition of broken/loose PCC or taking down old plaster at any storey of building complete all as specified and as directed. (Note: Rate shall be included for necessary scaffolding and safety arrangement)

Supply only integral water proofing compound complete all as specified.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement using WPC compound complete all as specified and directed. Note:- WPC shall be measured and paid separately.

M&L for rendering 5 mm thick in CM 1:3 on ceiling finished even and smooth without using extra cement complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for preparing newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed.

M&L for applying one coat of oil emulsion distemper (oil bound distemper) of any tint including preparation of surfaces of walls on old decorated plastered / unplastered surfaces by washing / rubbing down and scrapping old loose material, smoke, soot, moulds, moss and efflorence etc including filling and stopping the rough surface / nail holes with white cement /POP/ wall putty complete all as specified and directed.

M&L complete removal of existing treatment of plastered / unplastered old decorated wall surfaces and including applying two coats of distemper oil emulsion, white or tinted over a coat of primer and over a thin layer of wall care putty complete all as specified and directed.

M&L for applying one coat of white washing (Lime wash white) on wall surfaces including preparation of old decorated plastered / unplastered surface of walls by brooming down, scraping, cleaning and removing smoke soot, moulds, moss and efflorescene etc complete all as specified and directed.

M&L for applying one coat of white washing (Lime wash white) on ceiling surfaces including preparation of old decorated plastered / unplastered surface of ceiling by brooming down, scraping, cleaning and removing smoke soot, moulds, moss and efflorescene etc complete all as specified and directed.

M&L preparation of new plastered wall surfaces and including applying two coats of oil bound distemper over a coat of primer and over a thin layer of wall care putty complete all as specified and directed.

M&L preparation of new plastered wall surfaces and including applying two coats of cement base paint complete all as specified and directed.

M&L preparation of old plastered wall surfaces and including applying one coat of cement base paint complete all as specified and directed.

M&L for complete removal of exisitng treatment of old decorated surfaces of wall and applying two coat of exterior emulsion weather coat paint over one coat of primer complete all as specified and directed.

M&L for applying one coat of exterior emulsion weather coat paint including preparation of old decorated surface of wall by washing / rubbing down and stopping of / filling nail holes / rough surface with putty plaster of paris complete all as specified and directed.

M&L for complete removal of existing treatment of old decorated wall surfaces by Vacuum based sanding machine, removal of nails etc & filling cracks / hole with putty, applying one coat of primer using auto roller and applying a thin layer of wall care putty and sanding the same by Vacuum based sanding machine till obtaining even and smooth finish and applying two coats of oil bound distemper by mechanical spray complete all as specified and directed as per manufacturers instructions. Note:- Multipurpose mixer shall be used for uniform and proper mixing of putty.

M&L for preparation of newly plastered surfaces of wall by Vaccum based sanding machine, applying one coat of primer using auto roller and applying a thin layer of thick wall care putty and sanding the same by Vacuum based sanding machine till obtaining even and smooth finish and applying two coats of exterior weather coat paint using mechanical spray complete all as specified and directed as per manufacturers instructions. Note:- Multipurpose mixer shall be used for uniform and proper mixing of putty.

M&L for complete removal of existing treatment of old decorated wall surfaces by washing with jet washer machine, removal of nails etc & filling cracks / hole with putty, applying one coat of primer using auto roller and applying a thin layer of thick wall care putty and sanding the same by Vacuum based sanding machine till obtaining even and smooth finish and applying two coats of exterior weather coat paint using mechanical spray complete all as specified and directed as per manufacturers instructions. Note:- Multipurpose mixer shall be used for uniform and proper mixing of putty.

M&L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint) complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coats of synthetic enamel paint complete all as specified and directed.

M&L writing letters or figures (Block. Roman, Italic or Indian) n exc. 30 cm high with synthetic enamel paint complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed.

S & F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed.

S & F 75 mm bore PVC (SWR) bends of any radius, complete all as specified and directed.

S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S & F75 mm bore PVC (SWR) junction single, (single T) equal or unequal, complete all as specified and directed.

S & F 110 mm bore PVC (SWR) junction single, (single T) equal or unequal, complete all as specified and directed.

S & F 75 mm bore PVC (SWR) branch piece single, (single Y) equal or unequal, complete all as specified and directed.

S & F 110 mm bore PVC (SWR) branch piece single, (single Y) equal or unequal, complete all as specified and directed.

M&L point wiring with 1.5 sqmm single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including, rigid non mettalic PVC conduit 20 mm dia (medium grade) concealed in wall / ceiling with and including 1.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) with cast Iron / pressed steel terminal boxes 60 mm deep, modular plate and frame on walls with 3 mm thick plastic laminated / hylam sheet cover, fixed on wall / other surfaces with brass screws for mounting or housing switches, socket outlets, fan regulators, etc. including all other fixing accessories for one light / fan / exhaust fan / call bell point controlled by one 5 / 6 Amps switch, all necessary cutting chasing (as required) and making good the disturbed surfaces including finishes to match with adjacent surfaces and including taking down old unsv ones and connected for one light / fan / bell point etc complete all as specified and directed.

All as per Sl. item No. 33.00 above but for one 5 / 6 Amps socket outlet point on independent board.

All as per Sl. item No. 33.00 above but for one 16 Amps socket outlet point on independent board with 2.5 sqmm cable and 2.5 sqmm earth wire.

All as per Sl. item No. 33.00 above but for one 5 / 6 Amps socket outlet point on same board.

All as per Sl. item No. 33.00 above but for one light point controlled by two, 2 - way switches complete all as specified and directed

M&L point wiring with 1.5 sqmm single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including PVC casing caping (double lock pattern) and accessories on wall / ceiling surfaces etc. with and including 1.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) with cast Iron / pressed steel terminal boxes 60 mm deep, on walls with 3 mm thick plastic laminated / hylam sheet cover, fixed on wall / other surfaces with brass screws for mounting or housing switches, socket outlets, fan regulators, etc including all other fixing accessories for one light / fan / bell/ exhaust fan point controlled by one 5 / 6 Amps switch including taking down wiring & connected switch for light point / fan point / exhaust fan point / call bell point etc complete all as specified and directed.

All as per Sl. item No. 38 above but for one 3 / 5 Amps socket outlet point on independent board.

All as per item No. 38.00 here-in-before but one 3 pin socket outlet / 5 amps on the independent board with other switches, with cables 2.5 sqmm size complete all as specified and directed

All as per Sl. item No. 38.00 above but for one 3 / 5 Amps socket outlet point on the same board.

All as per Sl. item No. 38.00 above but for one light point controlled by two, 2 - way switches complete all as specified and directed

M & L in replacement concealed sub main wiring with 2 runs of 2.5 sqmm main wire along with 1 run of 2.5 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC conduit (medium grade) with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the disturbed surfaces including finishes to match with adjacent surfaces complete all as specified and directed. NOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length.

All as per item No. 43.00 above but with 2 runs of 4.0 Sqmm main wire along with 1 run of 4.0 Sqmm earth wire.

All as per item No. 43.00 above but with 2 runs of 6.0 Sqmm main wire along with 1 run of 6.0 Sqmm earth wire.

All as per item No. 43.00 above but with 2 runs of 10.0 Sqmm main wire along with 1 run of 10.0 Sqmm earth wire.

S & F Switch piano 5 Amps single pole two way complete all as specified and directed.

S&F switch piano modular type one way, 5 / 6 Amps, 240 volt complete all as specified and directed.

S&F switch piano modular type two way, 5 / 6 Amps, 240 volt complete all as specified and directed.

S&F switch piano modular type one way, 15 /16 Amps independent, 240 volt complete all as specified and directed.

S&F socket outlet multi purpose modular type 3 pin 5 / 6 Amps, 240 volts combined 2 modular complete all as specified and directed.

S&F socket outlet multi purpose modular type 3 pin 15/16 Amps, 240 volts combined 2 modular complete all as specified and directed.

S&F bell push modular type 6 Amps, 240 volts combined 2 modular complete all as specified and directed.

S&F switch piano flush type one way, 5 / 6 Amps, 240 volt complete all as specified and directed.

S&F switch piano flush type one way, 15 Amps, 240 volt complete all as specified and directed.

S&F switch piano flush type two way, 5 / 6 Amps, 240 volt complete all as specified and directed.

S&F socket outlet 2 in 1, 5 pin 6 Amp, flush type complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin 5 and 15 Amp, flush type complete all as specified and directed.

S&F in replacement switch socket combination 2 in 1 pin 6 Amp, flush type complete all as specified and directed.

S&F in replacement switch socket combination 2 in 1, 3 pin 5 and 15 Amp, flush type complete all as specified and directed.

S&F bell push flush type 6 Amps, 240 volts complete all as specified and directed.

S&F in repairs PVC rectangular block for mounting switches, sockets, regulators etc with and including 2.8 mm thick plastic laminated sheet cover (white) of size 100mm x 100 mm x 50 mm deep complete all as specified and directed

All as per Sl item No. 62.00 above but of size 175mm x 100 mm x 50 mm deep.

All as per Sl item No. 62.00 above but of size 200mm x 150 mm x 50 mm deep.

All as per Sl item No. 62.00 above but of size 250mm x 200 mm x 50 mm deep.

All as per Sl item No. 62.00 above but of size 350mm x 300 mm x 50 mm deep.

S&F MCB TPN 40 to 63 Amp, 10 kA, 240V 'C' curve complete all as specified and as directed.

S&F MCB SPN 40 Amp, 10 kA, 240V 'C' curve complete all as specified and as directed.

S&F MCB SP 6 to 32 Amp, 10 kA, 240V 'C' curve complete all as specified and as directed.

S&F ceiling rose, surface bakelite 65 x 50 mm three terminal complete all as specified and directed.

S&F lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings complete all as specified and as directed.

S&F modular type electronic fan regulator (four step type), 230V, AC 50 Hz not less than 450 Watt complete all as specified and directed.

S&F flush type electronic fan regulator (four step type), 230V, AC 50 Hz not less than 450 Watt complete all as specified and directed.

S &F in repairs Buzzer, AC. 230 volts, single pole completed all as specified and directed.

S &F in repairs Bell buzzer, Ding Dong AC. 230 volts, single pole completed all as specified and directed.

S &F in repairs Bell multi music type, AC. 230 volts, single pole completed all as specified and directed.

S&F in replacement MCB DB, SPN 12 way, IP-43, IK09, double door, metal door type, with 100A & neutral and earth bus bar for fixing MCB fixed flush to wall & making good the disturbed surfaces complete all as specified and directed.

S&F MCB DB, SPN 8 way, IP-43, IK 09, double door type with metal door, with 100A copper neutral and earth bus bar for fixing MCB, fixing flush to wall & making good the disturbed surfaces complete all as specified and as directed.

S&F MCB DB, TPN 4 way, IP-43, IK 09, double door type with powder coated metal door, with 200A copper neutral and earth bus bar for fixing MCB, fixing flush concealed in wall & making good the disturbed surfaces complete all as specified and as directed.

S&F in replacement VTPN DB, 4 way, IP-43, IK 09, double door type with metal door, with 250 A copper neutral and earth bus bar, suitable for fixing upto 160 Amp MCCBs as incomer fixing DPX 250+12 flush to wall & making good the disturbed surfaces complete all as specified and as directed.

S&F MCCB 4 pole 125 Amps breaking capacity 25 KA, 415 Volts Ics = 100% Icu including spreader link complete all as specified and directed.

S&F in replacement Recessed Mounted Square (2'x2') LED Panel light 36 watt with CRCA powder coated housing & high transmittance Opal diffuser for glare free with Electronic LED Driver. IP20, PF ≥0.95, System Lumens ≥120 lm/W, 5700k CRI ≥ 80, Operating Voltage range 140 V - 270 V. complete all as specified and directed.

S & F in replacement Recess Mounted Round LED Downlighter 15 watt with ABS housing & PC Opal diffuser with integral Electronic LED Driver. IP20, PF ≥0.95, total System Lumens Efficiency not less than lumens 1450 lm and color temp 5700k CRI ≥ 80, Operating Voltage range 140 V - 270 V. complete all as specified and directed.

S & F in replacement surface Mounted Round LED Downlighter 15 watt with ABS housing & PC Opal diffuser with integral Electronic LED Driver. IP20, PF ≥0.95, total System Lumens Efficiency not less than lumens 1450 lm and color temp 5700k CRI ≥ 80, Operating Voltage range 140 V - 270 V. complete all as specified and directed.

M&L in replacement for laying GI tubing light grade 40 mm dia with all fittings and GI MS Clamps of size 50x6mm for fixing of GI Pipe along the wall to TPN DB for cable protection all as specified.

M &L of Earthing with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick, buried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 Mtr below ground level connected using galvanised iron earth lead wire 4 Sqmm as earthing electrode by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe (medium grade) and other end connected to earthing test point as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C both ways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth up to a distance not exceeding 50 Mtr etc all as shown on electrical plate No. 5 of MES Schedule Part-I complete including testing on completion. On testing after completion if the desired earth resistance is not obtained the earthing will be made again by the contractor at no additional cost and including dimantling complete all as specified and directed.

S&F in repairs Exhaust fan 250 mm sweep, non metallic plastic body, AC single phase, 230 V, 50Hz with & including self closing louvers, nuts, screws, bolts of specified sizes, electrical connection with twisted three core PVC insulated unsheathed flexible cord of size 0.75 sqmm copper conductor from ceiling rose to exhaust fan and writing MES number in 2 cm height with synthetic enamel paint and cutting wall for making hole awriting MES number in 2 cm height with synthetic enamel paint and cutting wall for making hole and making good the disturbed surface to match the existing surface complete all as specified and directed. Note: Old unsv fans retrived from site deposited to the AGE EM Fan section and rate for the same is deemed to be included in the quotated rate.

S&F in replacement Exhaust fan 300 mm sweep, heavy duty, metal body, 1400 RPM (minimum), AC single phase, 230 V, 50Hz with bird guard, nuts, screws, bolts including electrical connection, writing MES number in 2 cm height with synthetic enamel paint and cutting wall for making hole and making good the disturbed surface to match the existing surface complete all as specified and directed. Note: Old unsv fans retrived from site deposited to the AGE EM Fan section and rate for the same is deemed to be included in the quotated rate.

S&F in repairs Metal Plug Socket DB with sheet metal enclosures with two pin and earth plug and socket one double pole MCB 20 Amps, 240V for Geysor connenction complete all as specified and directed.

S&F in repairs LED batten light fitting 1 x 10 watt inverter (backup) type, 230 Volts, suitable for surface mounting, lithium ion battery with minimum 4 hrs backup time, extruded polycarbonate housing & extruded polycarbonate diffuser, lumen efficacy 100 Lm/watt (minimum), colour temperature 6500K (minimum), CRI 80 (minimum), IP-20 (minimum), PF 0.90 (minimum), in-built surge protection 3.5 KV (minimum) inlcuding all fixing arragement and electrically connecting from ceiling rose to light fitting complete all as specified and directed.

S&F in repairs LED battery backup inverter bulb of Lamp wattage: - 9 to 12 Watts, Battery: - Not less than 2200mAh or not less than 4 hrs backup,Efficeacy: - Not less than 110 Lm/Watt complete all as specified and directed.

S & F in repair LED Bulk Head fitting 10 watt with Injection molded polycarbonate housing IP66, IK10, 3.5kV inbuilt surge protection, PF ≥0.95, total System Lumens not less than 1000 lm, 6500k CRI ≥ 80, Operating Voltage range 140 V - 270 V. complete all as specified and as directed.

S & F in repair Surface and wall mounted LED batten 20 watt 4ft long with Aluminum extruded housing , high quality polycarbonate diffuser & integrated Electronic Driver with IP20, PF 0.90, total system lumen 1050 lm, color temp 6500k CRI ≥ 80, inbuilt surge protection 3.5 kv (minimum), Operating Voltage range 140 V - 270 V complete all as specified and directed.

S & F in repair LED Street Light 25 watt made up of pressure die cast aluminium housing with highly efficient LEDs and PC cover with integrated lens with IP66, IK07, System Lumen Efficasy ≥100 Lm/W, 5 kV Surge Voltage Protection,Operating Voltage range 140 V - 270 V and bracket suitable for street light made out of GI pipe light grade of 25 mm bore & 0.75 mtr length (minimum), bend to shape including 2 pairs of MS flat iron clamps made out of 40 x 5 mm MS flat, nuts, bolts & washers etc, & painting the bracket with two coat of aluminium paint over a coat of red oxide primer complete all as specified and as directed.

PS ENTERPRISE (BID ID -3133198)

VICKY ENTERPRISES (BID ID -3132947)

R N SAH N CO (BID ID -3131954)

SHRI N.DAS (BID ID -3133809)

MS ESSCON (BID ID -3132355)

KARMIBRINDA (BID ID -3133942)

M/s B. K. Ghosh and Co. (BID ID -3133656)