Annual repair and maintenance to Residential Sr Officers qtrs (MVI, MV, GC and GD) at Madhuban area for 2024-25

Amount

Dismantlimg & removing of the following old damaged items as per the reqiurment at site at any height upto any floors including scaffolding, disposing the same at specified place including supplying of all labours, materials, T&P etc all complete as per the direction of Engineer-in-charge.(Excluding GST).

Plastering

A.S. flooring

Brick work.

Old damaged grading from roof surface.

R.C.C. member.

Brick work in Fly Ash Bricks of size 25Cm X 12Cm X 8Cm and having crushing strength not less than 75 Kg/Cm² to 99Kg/Cm with C.M (1:6) including splay / cutting, racking out the joints curing, hoisting, staging at any height with cost and supply of all materials, labour, T&P, tollage, royalties, taxes, staging, scaffolding, curing, water charges all transportation charges etc. all complete & as per direction of Engineer-in-charge. (Excludicng cost of GST).

12mm thick Cemnet Plastering with CM(1:6) proportion, over brick work including racking out the joints, finished smooth to the exposed surface, rounding thecorners wherever found necesary including cost & supply of all materials, labour, T&P, staging scaffolding, watering, curing, taxes, tollage, royalties, etc. complete as directed by Engineer-in-charge.(Excluding GST).

Reinforced Cement concrete (1:11/2 :3)) using 12mm to 20mm size C.B.G. chips for all floors,foundation & plinth etc. of approved quality mixing, hoisting,laying, compacting, curing with cost and supply of all materials, labour,T&P, taxes, tollage, royalties, etc. all complete but excluding GST as directed by Engineer-in-charge.

Providing rigid smooth leak proof centering & shuttering made of steel/ply, plank of approved quality for R.C.C. structures and deshuttering, removing the same after due period with supply of all materials, labour, T&P, taxes, royalties, tollage, etc. all complete for all floors / height as directed by Engineer-in-charge.( Excluding GST ).

Supply Tor / TMT steel manufactured by SAIL/VIZAG/TISCON steel of Fe-500 confirming to IS-1786 including cutting bending, binding straightening of M.S. Tor Steel/Coil tying the grills and placing the grills in position,drilling holes in concrete from 8mm to 16mm dia and inserting with use of chemicals including supply of 18 to 20 gauge binding wire with supply of all materials, labour, T&P, all taxes, etc. complete as directed including cost of steel.(No payment shall be made for extra weight than theoretical co-efficient).(Excluding GST).

Deployment of skilled and Un-skilled labour for attending day to day maintenance work like minor cement work & other Miscellaneous work with supply of necessary T&P etc. all complete as per direction-in-charge.The Labours will be supplied at section office daily basis & department will deploy as per requirement (Excluding cost of GST).

Skilled labour ( with EPF & ESI)

Un-Skilled labour ( with EPF & ESI)

Dismantling and removing the old damaged doors, windows and ventilators including removing of frame, hinges, fastenings and stacking the same for reuse if any and removing the debris within all leads & lifts with cost supply of all labour, T&P, staging, scaffolding, all transportations etc. Complete & as directed by Engineer In-Charge..(Excluding GST).

Repairing of old damaged door/window Supply of 32mm thick seasoned Non-Sal/Hard wood paneled Door/window shutters as is where required having both side styled moulded having bottom rail of 200 mm thick,top rail 100mm thick , middle lock rail 200 mm thick alongwith straight vertical moulded style of 125mm width (total 2 panels) and panel should be 20 mm thick piasal plank embedded 16mm to styles & rails with one no of aluminum aldrop of size 300mm x 16mm x 40mm, two nos of 150 mm with 175mm x 40mm flat aluminum handles, 2 nos. of 200 mm x 10mm aluminum tower bolts and required numbers of wooden hinged cleats, fixing at position etc all complete . including cost of all materials, labour, loading & unloading Charges, all taxes, transportation charges, stacking at site store etc. all complete as directed by Engineer In-Charge.(Excluding GST)

Suplying, fitting & fixing of Mosquito proof net ( Netlon ) of approved quality for window & ventilator after removing the damaged nets , changing with new net fixed to proper position by stiching male female velcro tape all complete including removing of existing old damaged frame from position,all complete including cost & supply of all materials, nail, labour, T&P, taxes, transportation, removing the existing old frames from position etc. as per direction of Engineer- in- charge.Excluding GST.

Supplying, fitting, fixing of Mosquito proof net door shutter made out of seasoned piasal wood (32mm X 75mm Size) batten for style, top rail, bottom rail, lock rail with mosquito proof net ( plasto net 20mm X 20mm square mesh )/ (Netlon insect screens 20mm X 20mm square mesh) of approved quality , make with wooden beading ,nail and fixed the new frames with all aluminium Handles, tower bolts, stainless steel hinges of approved size, quality etc. all complete including cost & supply of all materials, nail, labour, T&P, taxes, transportation, removing the existing old frames from position etc. as per direction of Engineer- in- charge.Excluding GST.

Supplying, fitting, fixing Sal wood frame choukaths for doors, windows,ventilators,coaltaring two coats to wall side face of frame, fixing to position with required nos. of W.I. clamps of size 25cm to 30cm long,35mm wide, 2mm to 3 mm thick in C.C(1:3:6) including cutting grooves in choukaths, jointing with adhesive solution fixing to proper position etc. all complete including cost and supply of all materials, labour, T&P,all taxes, transportation, staging, scaffolding etc. complete as directed by the Engineer-in-charge..(Excluding GST).

Supplying, fitting, fixing up AL window (sliding type) made up aluminum Section 9778 as window fram, section No. 4095, 4096 & 9777, 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber bending including locking arrangement including all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer in charge. Excluding GST

Supplying of following items including cost and supply of all labour, all fittings, T&P, all taxes, transportation from departmental stores to work site , staging, scaffolding, etc. all complete as per direction of Engineer-in-charge. etc. all complete & as per direction of Engineer-in-charge. .(Excluding GST).

12mm BWRply Wood (ISI)

19mm BWRply Wood (ISI)

Alumunium Handle 100mm.

Alumunium Tower bolt barrel type (150mm x 10mm)

Stanless steel Aldrop (15mm X 300mm long).

Hinges (125mm x 75mm x 4mm)

300 X 16 mm Stainless Steel Aldrop (Stapple)

5mm thick plain/frosted colour glass

Oxidised Mild Steel screws 50mm

Green sheet of good quality.

Sunmica of good quality & different colour

Soap holder (Jaguar make)

Brass hanger (Jaguar make)

Trumbler holder (Jaguar make)

Brass handle 125mm

Brass aldrop ( 300mm long)

Brass Hinges (125mm ) long

Brass tower bolt (200mm long )

50 mm dia GI pipe ( medium )

40 mm dia GI pipe ( medium )

Supplying fitting fixing of Vitrified floor tiles (premimum Quality 600 X 600mm size or cutting into proper size to match the flooring) in floors, treads or steps and landing on 20mm thick bed of cement mortar 1:4 (1Cement : 4 Sand) jointed with white cement including rubbing and cleaning complete including supply of all labour materials taxes tollage etc all complete but excluding GST as per direction of Engineer-in-charge.

Supplying fitting fixing of 8mm thick ceramic floor tiles ( premimum Quality 300 x300 mm or 400 x 400 mm size)in 1st floor, treads or steps and landing on 20 mm thick bed of cement mortar 1:4(1cement: 4 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and cleaning complete including supply of all labour material taxes tollage etc all complete but excluding GST as per direction of Engineer in charge.

Supplying, fitting, fixing of MS welded grills, fabricated M.S flat, welded to approved design, size, fixed to position with screws, nails and grouting to walls in C.C (1:2:4) including cutting grooves in walls and making good the damages with cost and supply of all materials, labour, T&P, taxes, transportation, welding charges , grinding, staging, scaffolding, curing etc. all complete as per the direction of Engineer in charge.(Excluding GST).

Painting with acrylic base plastic emulsion paint of approved quality shade including scraping, cleaning, washing the old paint with scraper filling the holes with plaster of paris preparing the surface by sand papering, applying paint uniformly including cost and supply of all materials, labour, T&P, all taxes, transportation charges, staging scaffolding, etc. complete but excluding GST as per direction of Engineer-in-charge.

One Coat.

Two Coats

Enamel painting one or more coat to old wood work of approved quality & shedover a coat of primer after scrapping, sand prepering & cleaning the surface & filling the joints & holes with wax putty where found necessary before paint including all cost, supplying of all labour, materilas, T&P, scaffolding at any hight all complete as per the direction of Engineer-in-charge..(Excluding GST).

Finishing the wall surface by applying two coat of Arcylic wall putty water base of approved quality on plaster surface area including cleaning, brushing, removing the flakes and finishing smooth the wall surface with sand papering including supply of all material, labour, T&P scaffoldings, taxes etc. complete but excluding GST as directed by the Engineer-in-charge.

One coat priming with water bond cement primer to the newly plaster surface of the exterior wall or over the existing putty surface of the interior wall of approved make & shade to make an even finished surface in all heights with all scaffolding and staging including cost and supply of all materials, labour, T&P, all taxes, transportation charges, staging, scaffolding, etc. complete but excluding GST as per direction of Engineer-in-charge.

Supplying, fitting, fixing of 25mm Thick chequered Tile of approved quality & shade laying over a base course of cement mortar (1:3) required thick with cement slurry including close chipping to the existing floor or newly prepared base, cutting of tiles to size, filling the joints with the proper materials laid to proper slope and level cleaning the top surface with cost and supply of all materials, labour, T&P, taxes, curing, transportation charges, staging, etc. all complete as per direction of Engineer-in-charge (Excluding GST).

Supplying fitting and fixing of 25mm thick WPC door shutter of 0.55 density with all fittings and fixtures with stainless steel including cost of loading & un-loading charges, with supply of all labour, materials like hinges, tower bolt, handle, aldrop etc. T&P, all taxes, transportation, all lead and lift etc. complete as per direction of Engineer-in-charge (Excludicng cost of GST)

Supplying, fitting & fixing of WPC door and window frames of size( 50x70mm) of 0.75 density with all fittings and fixtures with stainless steel including cost of loading & un-loading charges, with supply of all labour, materials like hinges, T&P, all taxes, transportation, etc. all lead and lift complete as per direction of Engineer-in-charge (Excludicng cost of GST) .

Supplying, fitting & fixing of 32mm thick Piasal panel door & window shutter with cost of loading & un-loading stacking at departmental stores all complete including cost and supply of all materials, T&P, all taxes, transportation, etc. complete as per direction of Engineer-in-charge.(Excluding GST)

Exterior painting two coats to wall surface with acrylic based weather coat paint of approved quality & shade having resistance to Fungus, Fading, including scraping, cleaning, brushing, washing the old paint, as and when required, removing the flakes applying uniformly two coats including cost and supply of all materials, labour, T&P, taxes, transportation, staging, scaffolding, etc. complete but excluding GST as directed by the Engineer-in-charge.

Supplying fitting fixing of 35mm thick single/doubble leaf factory made first class teak wood solid type decorative door made out of duly seasoned teak wood as per IS 1141 , 3D routing on front side,finishing with two coats of P.U polish all complete with supply of all fitting i.e. 3 nos,150mm long brass hinges with screws, brass mortice lock, 2nos 250 mm long brass tower bolts ,Brass stopper,Godrej/Ozone make seven lever door closer ,4 nos 300 mm ,long decorative brass handles etc including cost of all labour, material ,transportation,T&P ,taxes ,tollage etc all complete but excluding GST as per direction of Engineer in charge.

Supplying, fitting, fixing of precoated galvolume metal sheet of ISI mark and specification of 0.5mm. thick of approved quality including fixing of all EPDM Screw, ridge piece, eve board fixing of windities with L.I.J. hooks, water proof washer, cutting the sheets to proper profile with supply of all materials, labour, T&P, staging, transportation, scaffolding, taxes, etc. complete as per direction of Engineer-in-charge. ( Excluding GST )

Supplying, fitting & fixing of 32mm thick fully glazed shutter with 75mm width of all rails & styles made out of piasal wood with 5mm thick pin headed/frosted glass panels supported with wooden bitto or any other mean in the frame.(Excluding GST).

Padmanav Lenka

RASHMIRANJAN CHOUDHURI

BIBEKANANDA MOHAPATRA

Anil Kumar Dhal

Bidyadhar Swain

BIKRAM KESHARI ROUTARAY

AM CONSTRUCTION AND ENGINEERING

M/s. P N Construction