PROVN OF 6X4 WHEELER, 10X2 WHEELER PARKING SHED WITH HARDSTANDING, 2X TOILET NEAR BLDG NO 103 (MED STORES) AT BASE HOSPITAL AND PROVN OF 26X SECURITY LIGHTS WITH POLE AT WT AREA AND CAMP AREA (NO 1 MT BN), AMC C AND C UNDER GE E/M LUCKNOW

Amount

M&L for Excavation in trenches n exc 1.5 m wide and n exc 1.5 m in depth beyond ; for foundation, etc. or for shafts, wells , cesspits, manholes, pier holes etc n exc 10 sqm on plan and not 1.5 m depth and getting out complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out complete all as specified and directed.

M&L for Plain cement concrete 1:4:8, Type D-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M&L for brick work with fly ash bricks as per IS 12894 -2002 straight or curved on plan exc 6 m mean radius built in cement mortar 1:6, complete all as specified and directed.

Moorum/red bajri/earth filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering, complete all as specified and directed.

M&L for hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.

M&L for 100 mm thick plain cement concrete type B- 2, 1:4:8 (using 40mm graded stone aggregate) as in hardstanding and finishing the surface even and fair complete all as specified and directed.

M&L for 100 mm thick plain cement concrete type B- 2, 1:2:4 (using 40mm graded stone aggregate) as in hardstanding and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for 25 mm thick plain cement concrete 1:2:4, type B-0, (using 12.5 mm graded stone aggregate) as in damp proof course to horizontal or vertical surfaces including necessary formwork complete all as specified and directed.

Supply only integral water proofing compound powder conforming to IS specification, complete all as specified and directed.

M&L for rendering 15 mm thick in cm 1:4 on fair faces of brick or concrete surfaces and finishing even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in cm 1:6 on other tha fair faces of brick or concrete surfaces and finishing even and smooth without using extra cement using WPC mix with cement mortar @ 3% by weight of cement complete all as specified and directed. (Note :- WPC shall be measured and paid separately)

M&L for preparation of newly plastered surfaces and apply three coats of white wash on wall surfaces complete all as specified and directed.

M&L for preparation of newly plastered surfaces and apply two coats of cement base paint on wall surfaces complete all as specified and directed.

M&L for providing reinforced cement concrete, type B1 1:2:4 (20 mm graded aggregate) as in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided complete all as specified and directed.

M&L for providing reinforced cement concrete, type B1 1:2:4 (20 mm graded stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc, basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for providing reinforced cement concrete, type B1 1:2:4 (20 mm graded stone aggregate) as in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for providing reinforced cement concrete, type B1 1:2:4 (20 mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Use and waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work, flat rough finish surface complete all as specified and directed.

Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick Horizontal or sloping flat rough finish surface complete all as specified and directed.

Use and waste form work to sides and soffits of floor or roof beam, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams etc flat rough finish surface complete all as specified and directed.

M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for TMT bars 5 mm dia and upto and incl 10 mm in stirrups , spacer and binder complete all as specified and directed.

S&F Vitreous China bowl urinals, flat back, size of 465 x 355 x 265 mm minimum with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe, complete all as specified and directed. (Note :- Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

S&F vitreous china squatting pan, "Orissa pattern, size 580 x 440 mm white, with integral foot rest (excludidng flushing cistern and flush pipe) complete all as specified and directed.

S&F 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall becovered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F 125 mm aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 100 mm butt hinges, heavy weight, cold rolled mild steel, and fixed complete all as specified and directed.

S&F 125 mm aluminium anodised handle, cast type, anodised, fixed complete all as specified and directed.

S&F 15 mm bore GI tubes , medium grade, with and including fitting laid in trenches or fixed to wall complete all as specified and directed.

S&F 20 mm bore GI tubes , medium grade, with and including fitting, laid in trenches or fixed to wall complete all as specified and directed.

S&F 15 mm bore Stop valves, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specifeid and directed.

S&F 15 mm bore Bib taps, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specifeid and directed.

S&F 15 mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'HOT or 'COLD with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F vitreous (flat back or angle back type) china wash basin, white, any size, including cutting for pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed.

S&F PVC down waste pipe 32mm bore for wash hand basin complete all as specified and directed.

S&F PVC connections 15 mm size with PTMT nuts of length 600 mm long complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length withs rubber ring joints, laid in trenches or floors complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 110 mm bore PVC (SWR) 'T' junction (single 'T') equal or unequal complete all as specified and directed.

S&F 110 mm bore PVC (SWR) Vent cowl complete all as specified and directed.

S&F 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed, in any length withs rubber ring joints, laid in trenches or floors complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F PVC valveless, syphonic action type, flusing cistern, low level, white with inlet ball valve float and handle including bracket and all necessary fittings complete all as specified and directed.

Cutting into existing manholes for connecting new drains, 100 mm bore, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 raound or 3/4 section ) in cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) smooth finished, and reforming benching as required, complete all as specified and directed.

M&L for 15 mm thick Screed Bed or bedding layer of mortar for laying floor finishes in CM 1:4 complete all as specified and directed.

M&L for Non skid joint free coloured ceramic tiles 7 to 8 mm thick (Square / rectangular) area of each tile exceeding 0.06 sqm and not exc 0.11 sqm, in foor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.

M&L for 10 mm thick rendering on fair faces of brick work or concrete surfaces of in CM 1:4 and finishing the surface even and smooth without using extra cement complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks three layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt I. capacity of tank 1000 litres complete all as specified and directed.

S&F Ball brass valve high presure with polythene float & steel rod & fly nut complete , screwed for iorn pipe or brass ferrule and fixed 20 mm bore pipe complete all as specified and directed.

M&L for Glazed Ceramic tiles in vertical surface 300 x 200 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to matach the shade of tiles complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed.

Removing excavated mtrl from site n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point, complete all as specified and directed.

S&F steel windows with side hungs shutter including projecting type hinges with steel handle and steel peg stay complete with glazing bar, dove tailed or welded complete all as specified and directed.

S&F steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum getting out in soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roor covering/clading to wall, fixed with self tapping screws as specified complete all as specified and directed.

M&L for steel work in tubular trusses incl special shaped washer etc, complete using ERW or induction butt welded tubes complete all as specified and directed.

M&L for two coats of synthetic enamel paint over red oxide primer coating incl preparation of newly steel surfaces etc over 10 cm width or girth complete all as specified and directed.

S&F as in hold fasts and similar article confirming to Fe-290, Gde-E165, complete all as specified and directed.

M&L machine pressed precast conctete interlocking paver block any shape and size, ISI Marked, IS 15658-2006 of 80 mm thickness, M-35 Grade, complete all as specified and directed.

M&L for Point wiring complete with One light/fan point controlled by one switch 1.5 sqmm PVC (FRLS) insulated stranded copper conductor single core cable drawn through rigid non metalic PVC conduit and conduit accesseries fixed on surface of walls/ceiling pressed modular metal flush box 1/2 module to 8 module concealed in wall duly painted with two coat of black bituminous paint over a coat of red oxide primer plasticalong with white cover plate with plate up to 8 module for housing modular switches, and sockets, 1.5 sqmm PVC insulated (green insulation copper conductor) earth continuity cable drawn with wiring and connected to common earth dolly complete all as specified and directed.

One socket outlet point 5 Amp on the same board

One socket outlet point 5 Amp on an independent board

All as item no 66 above but using 2.5 sqmm , PVC insulated, stranded copper conductor single core cable for one 3 pin 15 Amp socket out let point on an independent board.

S&F modular switches 1 way 6A,1 module, complete all as specified and directed.

S&F modular 6 A sockets-2/3 pin 2 module complete all as specified and directed.

S&F modular switches 1 way 16A,1 module, complete all as specified and directed.

S&F modular 6/16 A sockets-2/3 pin 2 module complete all as specified and directed.

S & F ceiling rose surface bakelight two to three terminal complete all as specified and directed.

S&F Modular white cover plate with frame 3 module, complete all as specified and directed.

S&F Modular white cover plate with frame 6 module, complete all as specified and directed.

S&F Modular white cover plate with frame 8 module, complete all as specified and directed.

S&F modular sheet metal enclosures with socket plug top and MCBs with a two pin and earth plug and socket complete with one single pole MCB 20 Amps, complete all as specified and directed.

Supply and Fixing wall/surface mounting luminaires integrated LED Batten 22 W, 6000 K,100 lumens/watt , 230V with extruded Aluminium housing 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements complete all as specified and directed.

M&L for Sub main wiring with two single core PVC insulated cable (FRLS) with 4 sq mm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 2.5 sqmm stranded copper conductor earth continuity cable drawn through non metallic rigid existing PVC conduit including all conduit and fixing accessaries concealed in wall including making good disturbed surface to match of walls /ceiling complete all as specified and directed.

S&F 1100V grade heavy duty cable PVC insulated aluminium conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection ,one twin core cable flat or circular strande 10 sqmm aluminiuam conductor complete all as specified and as directed.

Supply and fixing exhaust/fresh air fan 250 mm sweep (white) plastic body with louvers including provn of flexible three core cable from ceiling rose to terminal for making connection , fitting on wall including all necessary fixing accessories complate all as specified and as directed.

S&F water heater storage type electric of capacity 25 ltrs to operate on 230 volt AC supply complete vertical type including 4 No full threaded fastner of size 100x10 mm with, 2 No washer, water connection with PVC flexible pipe of size 15 mm, 450 mm length 02 Nos & suitable plug top 16 Amp cap etc complete all as specified and directed.

Supply and fixing wall/surface mounting luminaires (Mirror Light) integrated LED Batten( 2 feet) 10/12 W, 6500 K, 230V ,100 lumens/watt,with extruded aluminium housing & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements complete all as specified and directed.

S&F MCB single pole 10 to 32 Amp, B curve 240 volts 10 KA breaking capacity complete all as specified and directed.

All as per item No 85 above but 40 Amp,C Curve , 240 volts, SPN single pole & neutral

S&F sheet metal enclosure for DB’s when MCB, to be used, SPN, 12 ways 240 volt with 200 Amps rated bus bar made out of 16 Gauge sheet steel double door complete all as specified and directed. (MCB required to be fixed shall be paid for separately under respective items of this Schedule ‘A’)

S&F Plastic Automatic Hand Dryer (White, Standard) MODEL NO. DETUAMHDRY001_B or euivalent as approved by GE complete all as specified and directed.

S&F LED Building security light 24/25 Watt with high power LED source (>110lumen/watt) PDC housing, IP65 and IK 07 with 4 KV inbuilt surge protection potted driver including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories, complete all as specified and directed. Make philips Green line smart cat No BRP042 LED 25 CW R1 S1 PSU GR/ Jaquar lightning cat part No LPCRSRT25WLC/ Eveready Mini might cat NO LED SL025157-02

S & F of GI pipe light grade, 32 mm bore, 1.20 mtr long bend in required shape, MS clamp 40x3mm thick duly painted with two coats of synthetic enemal paint fixed on wall including bolts and nuts complete all as specified and directed.

Sand cushioning for protection of cable complete all as specified and directed. Note :- Local approved tibba dry sand after removal of vegetations; grass and other deleterious substances shall be used for sand cushioning.

M&L laying well burnt fly ash bricks as per IS 12894 -2002, straight or curved on plan , laid flat with width equal to length of brick , laid dry over electric cable for protection complete all as specified and directed.

M&L for cutting of road/ path/hardstading/ concrete in floor, etc for laying of cable complete all as specified and directed.

Material and labour for PCC 1:2:4 type B-2 using 40 mm graded stone aggregates for filling of cutting of roads/path/hardstanding etc complete all as specified and directed.

Boring of hole under road/pavement/hard standing or any other situation by manual means and suitable for passing of GI pipe 40 mm bore and making good both ends complete all as specified and directed.

S&F GI Pipe (light grade) with necessary accessories/ fittings for cable protections/pole for crossing of culverts/nallah of 40 mm bore, complete all as specified and directed.

Material & Laying, jointing and testing LT under ground electric power cable crossed linked polyethylene ( XLPE) insulated, galvanised steel strip or wire armoured, ISI-7098 Marked, with aluminium conductor multi stranded , heavy duty 1100 Volts grade of size 16 sqmm cross sectional area, 4 core ,complete all as specified laid in trenches/ laid under floor or fixed naked with walls / on poles/ in ducts /in GI pipes etc. with and including MS Clamps, nuts , bolts, washers complete all as specified and directed. Note :- Excavation, earth work, sand cushioning, protection bricks/ tiles/ block and pipe shall be measured and paid separately under appropriate items.

M&L Earth continuity conductor or main earthing lead laying to treanches & fixed to pole 4 mm dia galvanised iron wire complete all as specified and directed.

Supply & fixing of automatic street light timer panel 12 KW /40 Amp switch using Infrared Sensor based for automatic switching of street lights based on LUX level of natural light. Required illuminance for switching ON is < 30 Lux and for switching OFF > 10 Lux level. The sensor (nature switch) alongwith suitable power contactors, Input (supply) MCB and output (load) MCB(s), support terminals should be enclosed in pole/ wall mountable enclosure made of rust proof, electric shock proof, termite proof and FR graded SMC junction box conforming to IP-54 degree of ingress three phase 8 KW lightening load capacity including mounting bracket, cable glands, openable doors with lock complete all as specified and directed.

Supply and fixing 60 W LED street light fitting with IP65/66 protection comprises of a pressure die cast aluminium housing, heat resistance toughened glass/polycarbonate LED lenses, surge protecton device of 4KV Internal and 10KV External, BIS electronic potted/encapsulated driver and all accessories pre-wired including connecting up with PVC insulated copper conductor cable 1.5 Sq mm, 3core.Street light should have, impact resistance of IK 07 , Lumen efficiency of LED not less than 110 lumen per watt system efficiency ,power factor >0.95, THD<10% at Full load CRI> 70% ,street light should have , lower THD, open circuit protection , over voltage protection , surge voltage protection. Company LOGO ingraved on housing of the street light complete including taking down of old UNSV fittings complete all as specified and directed. Note :-The contractor should take approval of techincal specification of luminaries and driver from department before procurement .

Supply drawing, connecting and testing 3 core, 1.5 Sqmm PVC insulated and PVC round sheathed` copper conductor (flexible ) industurial cable, 1100 Volts conforming to IS 694 in steel tubular poles from Junction box to street light fitting including providing suitable copper lugs complete all as specified and directed.

S&F wheather proof pole mounting junction box, base and door of junction box made out of SMC having outside dimention 333x233x120mm, inside dimention 300x200x105mm , single door front openable provided with hinged cover and locking arrangements with 4 Nos aluminium bas bar 63 Amps, mounted on porcelin insulator including M&L for MCB SP 10 Amp -1No, fixed on box in Din rail complete with electrical connection fixed to pole with suitable size FI clamp nut bolts and washer including embossing/painting of danger notice of size not less than 10cm x 7.5cm with letters, figures and conventional skull and bones in signal red colour on front face of junction box body complete all as specified and directed.

Supply & fixing GI brackets made of 40 mm nominal bore GI pipe medium grade of required length not less than 1.5 M long, mounting brackets made out of Mild steel FI 40x6 mm of required shape ( two Nos) duly fitted with Mild steel nuts, bolts and washers and painting with two coats of synthetic enamelled paint over one coat of red oxide Zn chrome primer and fixed to pole / walls etc complete all as specified and directed.

Supplying, transporting, erecting Steel tubular swaged poles type 410 SP-31 ( 9.0 metres long) complete with cast iron base plate, finial, taper plug, bolts, nuts and screws as specified, including necessary excavation and earth work , PCC 1:4:8 type D2 in foundations below pole, PCC 1:3:6 type C2 around poles and PCC 1:3:6 type C1 as in plinth block , disposal of surplus soil to a distance not exceeding 50 m and depositing where directed, painting steel tubular poles exposed surafces with Aluminium paint two coats over one coat of red oxide primer and providing 300 mm wide bands (3 bands/ straps with synthetic enamel paint and 2 bands with Black bituminous paint ) from plinth block and numbering of poles , painting embedded portion of poles with one coat of bituminous paint complete all as specified and directed.

Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by mean of GI wire 4 mm dia by means of bolts, nuts check nuts and washers of GI or steel and connecting to earthing test point, main switch board, testing on completion including PCC cover and frame, PCC (1:3:6) type C-2 as in earthing pit, MS funnel with wire mesh GI pipe 20 mm dia light grade for watering and GI pipe 15 mm dia light grade for the protection of GI wire from earth pit to earth point complete including necessary excavation and earth work in any type of soil, returning, filling in approved soil and disposal of surplus soil to a distance n.exc 50 m all as specified as shown in electrical plate No 5 SSR Part-I. PCC chamber shall be constructed at least one metre away from the earth pit and GI pipe fittings for watering shall be provided up to chamber and cost of the same is deemed to be included in the rate of earthing, complete all as specified and directed.

M R CONSTRUCTION

M/s Bipin Construction

M/S S.B. Singh and Sons

M/s SHIVAM CONSTRUCTIONS

M/S Reliance Construction

Total Construction & Management Services