REPAIRS TO SECURITY FENCING DRAIN AND FOOTPATH ETC AT DSTV SSV AND SKV UNDER AGE BR II OF GE SUKNA

Amount

M&L PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in walls or retaining walls, any thickness; size or shape and including pilasters, buttresses & columns and including demolition complete all as specified and directed.

M&L providing precast cement concrete 1:2:4 Type B1 (using 20 mm graded stone aggregate) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in cement mortar 1:4 complete with joints to match including necessary formwork or moulds & demolition etc. complete all as specified and as directed.

Use and Waste of formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter for rough finished flat surfaces of concrete complete all as specified and directed.

M&L brick work with sub class 'B' brick, straight or curved on plan exc. 6 m mean radius built in CM 1:6 including demolition complete all as specified and directed.

All as per Sl item No. 4 above but except bricks. Note:- Serviceable quantity of bricks obtained from demolition shall be reused under this item.

M&L precast cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) in landing, cover slabs (for manholes etc), chullah hoods, chajja, water troughs, mangers, shelves and similar articles with plain faces and set in cement mortar 1:4 including necessary forms, moulds etc. & demoliton complete all as specified and as directed.

M&L mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

All as per Sl item No. 7 above but 6 to 8 mm dia.

Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out all excavated material in soft / loose soil complete all as specified and directed.

Excavating over areas, not exc 1.5 m deep and getting out in soft / loose soil complete all as specified and directed.

Returning, filling in and including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed.

Removing of excavated surplus soil to a distance n. exc 50 m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.

M&L PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete including demolition complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in surface channel and drain and including demolition complete all as specified and directed.

M&L brick work with sub class 'B' bricks straight or curved on plan to any radius, built in CM 1:4 as in half brick thick wall / drain including demoliton complete all as specified and directed.

M&L bricks, sub class B, laid flat in floors / drain; old size bricks bedded and jointed in cement mortar 1:6 and pointed in cement mortar 1:6 including demoliton complete all as specified and directed.

All as per Sl item No. 16 above but except bricks. Note:- Serviceable quantity of bricks obtained from dismantling shall be reused under this item.

M&L bricks, sub class B, laid on edge in floors / drain; old size bricks bedded and jointed in cement mortar 1:6 and pointed in cement mortar 1:6 including demoliton complete all as specified and directed.

All as per Sl item No. 18 above but except bricks. Note:- Serviceable quantity of bricks obtained from dismantling shall be reused under this item.

M&L brick work with fly ash brick, straight or curved on plan exc. 6 m mean radius built in CM 1:6 and including demolition complete all as specified and as directed. Make :- ICL Concrete Industries / Koshi Brick Industries Pvt Ltd / Vaishnodevi Buildcon Private Ltd / Shankar Oil & Saw Mills

M&L brick work with fly ash bricks, straight or curved on plan to any radius, built in CM 1:4 as in half brick thick wall and including provision of 02 Nos 8mm dia TMT bars at every fourth course & demolition complete all as specified and as directed. Make :- ICL Concrete Industries / Koshi Brick Industries Pvt Ltd / Vaishnodevi Buildcon Private Ltd / Shankar Oil & Saw Mills

M&L flush pointing to brick walls in cement mortar 1:3 complete all as specified and directed.

M&L cement concrete chequered tiles 300 x 300 x 25 mm thick with grey cement with pigment, set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces as in floors laid over and including 15 mm thick screed bed in CM 1:4 & dismantling complete all as specified and directed. Make : Lovely / Anjali / Bharat Flooring / Hindustan tiles / Mehtab tiles

M&L 60 mm thick machine pressed precast concrete interlocking coloured paver block of any shape and size confirming to IS 15658-2006, M-35 grade, set with grey cement and pigment, laid over and including 25 mm thick sand cushioning complete all as specified and directed. Make :- Anjali tiles / Ultra tiles Pvt Ltd / Terra Firma / Ecco Scope / Mehtab tiles

M&L vitrified paver tiles of size 300 x 300 mm and 8 to 10 mm thick (square / rectangular) as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in CM 1:4 and dismantling complete all as specified and directed. Make:- Kajaria Ceramics Ltd / Asian Granito India Ltd / Somany Ceramics Limited / Varmora Granito Pvt Ltd / H & R Johnson India Ltd / NITCO / Orient Bell Ltd

S&F in repairs PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints laid in trenches or in floorscomplete all as specified and as directed. Make:- Supreme / Prince / Kisan Mouldings Limited

M&L hardcore of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed.

M&L 75 mm thick, PCC 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub base etc, including demolition complete all as specified and directed.

M&L 75 mm thick, PCC 1:3:6, type C-1 (using 20 mm graded crushed stone aggregate) as in floors, paths, plinth protection, hardstanding etc. finished even and smooth without using extra cement and including demolition complete all as specified and directed.

S&F in repairs 150 mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed.

All as per Sl item No. 30 above but 450 mm bore .

M&L PCC 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe including demolition complete all as specified and directed.

All as per Sl item No. 32 above but for 450 mm bore .

M&L 15 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth using extra cement complete all as specified and directed.

M&L 15 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement and including taking down complete all as specified and directed.

M&L preparation of new plastered wall surfaces and inlcuding applying three coats of white wash complete all as specified and directed. Make :- Rajasthan / Apple / Surya

M&L preparation of old plastered wall surfaces and including applying one coat of weather coat acrylic exterior emulsion paint complete all as specified and directed. Make:- Royal acrylic (crimson paints pvt ltd) / Dulax / shalimar paints ltd (Extra maximum ultra) / Berger paints ltd (weather coat) / Asian paints ltd (Appex ultima) / Jotun India pvt ltd

Dismantling posts or struts (wood, steel or R.C.C.) any section, embedded in concrete, brick work, masonry, etc, and including taking out embedded portion and making good disturbed ground complete all as specified and directed.

M&L PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L for mild steel work in hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc,) and including all necessary drilling, bolting or riveting, etc, and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F mild steel screw bolts diameter of neck 11 to 15 mm (machine made) with hexoganal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut, exc. 10 cm but not exc. 15 cm long complete all as specified and directed.

Supply only chain link MS galvanized fencing, any size or type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type of standards, rails, straining bolts, etc, and including provision of binding wire including dismantling complete all as specified and directed.

S&F in repairs galvanised. 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc, complete all as as specified and directed (each line wire to be measured).

M&L mild steel round bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Excavation in post holes (or similar holes) each not exceeding 0.5 cum, getting out, returning filling in and ramming earth in layers not exceeding 25 cm thick, watering and removing surplus soil to a distance not exceeding 50m and making good in soft/loose soil complete all as specified and directed.

M&L preparation of new steel surfaces of any description, not otherwise described over 10 cm width or girth and including applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. Make :- Jotun India Pvt Ltd / Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd (Borolac) / Shalimar Paints Ltd (Superlac)

M&L preparation of new steel surfaces of any description not exceeding 10 cm width or girth when unconnected with other painting or when painted in a different tint and including applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. Make :- Jotun India Pvt Ltd / Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd (Borolac) / Shalimar Paints Ltd (Superlac)

SANJAY KAUSHIK

Janata Enterprises

M/S B K ROY

M/S JAGRITI ENTERPRISES