SPECIAL REPAIRS TO STATION GYMNASIUM (BLDG NO P-150) AT INS KADAMBA AT NAVAL BASE KARWAR

Amount

Dismantling boarding, of any size and any description, fixed in any position with screws etc complete all as specified and directed.

Material and labour for Plain cement concrete type A-2 (1:1.5:3) with 20mm graded stone aggricate in sub floors, sub base, floors and pavings, etc complete all as specified and directed .

Supply, installation and fixing of Maple Air-Cush wooden sports flooring system of 84mm total thickness (approx) with 21 mm thick (50 to 100 mm width) kiln seasoned imported Canadian Maple wood (sycamore) surface board, in random length in tongue and groove shape (The edges of the boards will have a finger lock groove and the bottom side with air pass groove) over and including under frame made of commercial quality Fir/Spruce/Pine wood/ fresh sawn timbers as in runners of 70mm x 45mm treated with anti-termite solution and fixed on the bottom side with 18 mm thick air-cushioning rubber pads (EPDM) by nails through the two wings at 350 mm c/c. Finally the floor shall be machine sanded in uniform level and finished with DIN certified Polyurethane lacquer imported material of non-skid Bona (Sweden), as approved by wave 2K or Sport 2K EN-DIN . The vapour barrier shall be placed on levelled surface before laying of under frames all as specified and directed.

Notes: (i) The complete job shall be carried out through approved agency shall be of make/ manufacturer accredited with competent authority of construction of sports arenas and as approved by GE. (ii) The floor system shall be constructed after the concrete (fresh) has been cured for 21 days (iii) The surface board will be free from bee or borer holes splits, cracks and fungal attack and all timber shall be kiln seasoned with moisture content not more than 12%. Game Line Marking of Badminton Court with suitable standard colour as directed at site before applying the finish coat. Movable Net Pole for Badminton as recommended by Badminton World Federation. (iv) The runners having air cushioning pads will be placed on the vapour barrier in perfect level at 350 mm c/c in one direction. The surface boards will be screwed to the runners through the tongue only and will be locked with the screwed tongue by the groove of the adjoining board. The ends of the boards will be locked by inserting the wooden fingers through the edge grooves and fixed with suitable adhesive. An expansion gap of 10 to 15 mm will be left open between the wooden flooring and the surrounding tiled area/wall. (v) The quoted rates shall deem to be inclusive of vapour barrier and all other necessary items to complete the job in all respect to meet the standard of badminton court as per the norms of competent sports authority. (vi) The contractor shall render a guarantee certificate for the complete setup of new Air-Cush wooden sports flooring system for a period of 05 (five) years from the certified date of completion of work. Contractor shall at his own cost repair/replace/ make good the defects noticed and mentioned during this period by the Engineer in charge.

Material and labour for game line marking with required dimension and paint all as specified and directed.

Taking down chowkats or frames exceeding 1.5sqm but not exceeding 4 sqm each but with shutter (without taking off shutter from the frame) including making good disturbed portion to match the adjoing surfaces etc complete all as specified and as directed

All as per Item No:05 here in before but n.exc 1.5 sqm etc complete all as specified and as directed.

Material and labour for powder coated (Minimum thickness of powder coating 50 micron) Aluminium sections for frame and shutter for doors, sliding windows & ventilators (moveable louvers type) and for partitions with one or more rebates including joining cleat for fixing etc. Rubber gasketing all round the panels/ shutters to fix glass, PVC gasketing in all channels, locking arrangement, (minimum thickness of powder coating 50micron) complete all as specified.

Supply and fix powder coated (Minimum thickness of powder coating 50 micron) Aluminium sections for door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

Supply and fix powder coated (Minimum thickness of powder coating 50 micron) Aluminium sections for window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified.

Supply and fix 4.0 mm thick Sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sq.m in each pane fixed to Aluminium windows/ventilator etc complete all as specified and directed.

S&F Framed work such as grills, gratings, sun shed etc with ends of bars shouldered and/or riveted or welded, or forged into spikes, framed guard bars, barred iron doors, ladders, farmed balastures, walk ways, railings, window grills frame work of water tanks and similar work conforming to Fe-410-0 or Fe-310-0 complete all as specified and directed

Supply and fix Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Material and labour for preparing new or previously untreated surface of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Material and labour for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed etc complete all as specified and directed

Supply and fix Cast Brass pivot with plate size 25mmx 65 mm and suitable for 12mm thick toughened glass door etc complete all as specified and directed.

Supply and fix 4 levers Mild steel Mortice lock, vertical type, of size 100 mm etc complete all as specified and directed.

Supply and fix 150mm long Aluminium anodized handle of extruded sections etc complete all as specified and directed.

Supply and fix 100 mm medium weight Mild Steel Butt hinges to the frame etc complete all as specified and directed.

Supply and fix 150mm long aluminium anodized barrel tower bolts of extruded sections complete all as specified and directed.

Supply and fix 300mm long aluminium alloy, anodized sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet cost of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

Material and labour for 18mm thick PVC Ply Board/Sheets both sides plain as in Cupboard Door, Partition, Draws & shelves including solvent cement & beadings etc as per manufacturers instructions complete all as specified and directed.

Supply and fix 40mm width of flaps (when open) Continuous (piano) hinges, stainless steel, bright finish or electrogalvanised fixed to cupboard door etc complete all as specified and directed.

Supply and fix Magnetic catches brass body and striking plate including letting complete all as specified and as directed.

Supply and fix 20mm dia anodised aluminium alloy curtain rod or similar articles complete all as specified and as directed.

Supply and fix anodised aluminium alloy type brackets suitable for 20mm dia curtain rod or similar articles complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) etc complete all as specified and directed.

Material and labour for coloured glazed ceramic tiles of size 300 x 450 x 6 to 7 mm thick on vertical surfaces such as skirting, dado and rises to steps etc. including 10mm thick cement plaster in CM 1:3 set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles complete all as specified and directed.

Material and labour for Non skid ceramic coloured tiles 7 to 8 mm thick (Square/ rectangular), area of each tile exc 0.06 Sqm but n.exc 0.11 sqm as in floors etc laid over and including 15mm thick screed bed in CM 1:4 and set and jointed in neat grey cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Material and labour for Non Skid coloured ceramic tiles 7 to 8 mm thk (square/ rectangular) area of each tile exc 0.18 Sq.m but n exc 0.38 sqm laid in floors with neat cement slurry @ 3.00 kg/Square Metre over and including 15 mm thick screed bed of cement mortar (1:4) including pointing in white cement with pigment to match the shade of tiles etc complete all as specified and directed.

Taking up or down GI tubing and connections 15mm bore including cleaning or removal to store all as specified and directed.

Taking up or down GI tubing and connections 20mm bore including cleaning or removal to store all as specified and directed.

Taking up or down GI tubing and connections 25mm bore including cleaning or removal to store all as specified and directed.

Supply and fix 15 mm dia UPVC pipes of pressure rating 10 Kgf/cm2 fixed to walls, ceiling or in floors including jointing cleats, elbows and etc complete all as specified and directed.

Supply and fix 20 mm dia UPVC pipes of pressure rating 10 Kgf/cm2 fixed to walls, ceiling or in floors including jointing cleats, elbows and etc complete all as specified and directed.

Supply and fix 25 mm dia UPVC pipes of pressure rating 10 Kgf/cm2 fixed to walls, ceiling or in floors including jointing cleats, elbows and etc complete all as specified and directed.

Supply and fix in repairs stop valves/angle valve, cast copper alloy fancy type chromium plated with long shank and cup (concealed type), screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe of 15mm bore all as specified and directed

Supply and fix in reapir 25 mm dia gun- metal globe or gate valves, with iron wheel head screwed both ends for iron pipe & fixed etc complete all as specified and as directed.

Supply and fix in repairs vitreous china wash down water closet (pedestal pattern) white, including fixing bolts and necessary connection with existing pipes etc complete all as specified and directed. Note : Quoted rate shall excludes the cost of flush pipe, cistern & seat cover and the same shall be paid seperately under respective item.

Supply and fix in repair for seat cover for pedestal pan with plastic water closet seat , white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed.

Supply and fix in repairs for 10 litre capacity PVC valveless syphonic action type flushing cistern high or low level (exclusive of brackets) white with inlet ball valve, float and handle inlcuidng brackets complete all as specified and directed.

Supply and fix in repairs for providing 15 mm dia PVC connection of length 450mm long complete all as specified and directed.

Supply and fix in repairs flush pipes PVC 32mm dia for low level flushing cisten to pedestal pan, including all joints, cones, India rubber (nozzles of W.C pans) all as specified and directed.

Supply and fix in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook including making connection and fixed in positions complete all as speified and directed.

Supply and fix in repairs two way bib cock with two lever and wall flage chromium plated brass of approved make, screwed for iron pipe 15mm boe complete all as specified and directed

Supply and fix Oval shaped under counter Wash hand basin vitreous china size 590 x 420 mm including brackets waste brass chromium plated with long screwed shanks and fly nuts 32 mm size complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floor, approns etc laid bedded and pointed in any mortar all as specified and directed.

Material and labour for 18-20 mm thick Granite (of any type) work black colour (table rubbed and polished) in wash asin counter, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified and directed.(Rates are inclusive of cutting portion as per the required size of counter sunk wash hand basin, sink and fixing etc complete)

Material and labour for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Supply and fix in repairs fancy type pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and 15 mm bore of pipe complete all as specified and directed.

Supply and fix in repairs for vitreous china urinals, half stall (back or corner wall type,) complete including providing and fixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugs with and including 60 mm long brass screws, pointing around urinal back in cement etc complete all as specified and directed

Supply and fix Self-closing taps, cast copper alloy, chro-mium plated, screwed for iron pipe of 15mm dia and fixed for urinals in repairs complete all as specified.

Supply and fix in repairs 32mm size waste fitting (coupling) brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed all as specified and directed.

Supply and fix in repairs 32mm dia PVC waste pipe for WHB and urinals fixed in repairs complete all as specified and directed.

Supply and fix in repairs toilet paper holder with flat recessed type stainless steel etc complete all as specified and directed

Supply and fix in repairs bib taps, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe 15mm bore complete all as specifed and directed.

Supply and fix solid PVC door frame of size 50mmx 47mm made out of 5mm wood grains printed PVC sheet reinforced with MS square tube and edges painted to match with printed sheet complete all as specified and directed.

Supply and fix factory made solid panel PVC door shutter 30 mm thick (styled) consisting of frame made out of MS tube for top & bottom rails, MS frame shall be covered with heat moulded wood grain printed PVC "C" channel having a 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and wood grain printed colour PVC sheet for top rail, lock rail and bottom rail on either side & as gap inserted for top rail and bottom rail, panelling of wood grain printed colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with decorative PVC beading of 10mm x 10mm (90 degree) and jointed together with salvent cemet supplying and fixing in the frame at site all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads,shoes,bends,swan-necks etcall as specified and directed.

Material and labour for PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors of 110mm bore etc complete all as specified and directed.

Material and labour for PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors of 75mm bore etc complete all as specified and directed.

Supply and fix 75mm dia PVC (SWR) bend all as specified and directed

Supply and fix 110mm dia PVC (SWR) bend all as specified and directed

Supply and fix 110mm dia PVC (SWR) reducers all as specified and directed

Supply and fix 75mm dia PVC (SWR) junction single T equal or unequal all as specified and directed

Supply and fix PVC (SWR) floor trap of 110mm dia, plain with grating including jointing with solvent cement etc complete all as specified and directed.

Supply and fix PVC (SWR) floor trap of 75mm dia, plain with grating including jointing with solvent cement etc complete all as specified and directed.

Material and labour for 160 mm dia. PVC rain water pipes with Socket and including Stack clamps out of 50mm by 5mm including bolts and nuts and securing ends of stay to wall or roof for 110mm pipe.all as specified and directed.

Supply and fix 160mm dia PVC bend all as specified and directed

Taking down cement plaster on brick or concrete surfaces of wall/ceiling and likes including racking out joints, hacking for keys scrubbing down with water etc any description including removal of rubbish outside MoD land, complete all as specified and directed. Note : The rate quoted by the Contractor is deemed to be included necessary scafolding and form works.

Material and labour for Rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:4) etc complete all as specified and directed

Material and labour for Rendering 10 mm thick on brick or concrete surfaces in cement mortar (1:6) etc complete all as specified and directed

Material and labour for preparation of new plastered / decorated wall surfaces applying two coats of Acrylic Emulsion exterior grade, weather proof antifungal Paint over a coat of primer including necessary scafolding and safety measures as required etc complete all as specified and as directed.

Material and labour for preparation of new plastered / decorated wall surfaces, applying Two coat of oil bound distemper over a coat of alkaline resistant primer over a coat of 3mm thk wall care putty including necessary scafolding and safety measures as required etc complete all as specified and as directed.

Material and labour for preparation of old plastered / decorated wall surfaces including complete removal of existing treatment by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc complete and applying two coat of oil bound distemper over a coat of alkaline resistant primer including necessary scafolding and safety measures as required etc complete all as specified and as directed.

Material and labour for preparation of old plastered / decorated ceiling surfaces including complete removal of existing treatment by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc complete and applying Two coat of Oil Bound distemper over a coat of alkaline resistant primer including necessary scafolding and safety measures as required etc complete all as specified and as directed.

Material and labour for preparation of old plastered / decorated wall surfaces including complete removal of existing treatment by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc complete and applying one coat of Acrylic Emulsion exterior grade, weather proof antifungal Paint over a coat of primer including necessary scafolding and safety measures as required etc complete all as specified and as directed.

Material and labour for preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint including necessary scafolding and safety measures as required all as specified and directed.

Dismantling of galvalume aluminium zinc coating GI based plain or corrugated steel sheets of any thickness in roofing all as specified and directed.

Supply and fix pre- painted Galvalume Aluminium Zinc coating GI based corrugated steel sheets 0.5 mm thick of any colour having tensile strength 550 Mpa as in roof covering/cladding to wall, fixed with J hooks of required size and including scafolding upto any height complete all as specified and directed.

Supply and fix Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws and including scafolding upto any height as specified

Material and labour for screed bed 15mm thick using WPC on concrete surfaces on roof top in CM 1:3 finished fair and smooth(without using extra cement) complete all as speified and directed. (WPC shall be measured and paid seperately)

Material and labour for water proofing treatment by applying oil bound bitumen primer, having a density of 0.87 - 0.89 Kg/lit, at the rate of 0.40 ltr/Sqm, providing and laying 4 mm thick APP modified water proofing membrane weighting not less than 3 Kg/Sqm of approved make including minimum 10 cm side lap and 15cm end lap, laid and pasted with blue flame torching applications and finally finishing with solar reflective bituminous aluminium paint at the rate of 0.1Kg/Sqm complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items is measured under schedule of credit) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed

Material and labour for point wiring complete with 1.5 Sqmm two single core PVC insulated, sheathed 1100volts agrade cable with stranded copper conductor FRLS grade conforming to IS-694 part II with ISI mark FR grade drawn through and including suitable size rigid non metalic PVC conduit concealed with all accessories, including suitable size sunkpresses steel or cast iron terminal box with 3mm thick plastic laminated sheet top cover fixed flush with wall surface by means of brass screw and sunk cup washers for mounting of switches, sockets, fan regulators etc including providing 1.5 Sqmm PVC insulated sheathed multi stranded copper conductor cable as earth wire connected to metallic bodies of luminaires/fan etc at one end and to common earth dolly at other end all as specified for fan/light point

All as per item No.85 here in before but for using 2.5 sqmm copper conductor multi stranded for power points on independent board. Note for item 85&86 (i) PVC casing caping wiring shall be provided where concealed wiring is not feasible (i.e. concrete surface/beam column/ceiling etc). The same shall be deemed to include in the quoted rate. No extra cost shall be paid for the PVC casing caping item.

Supply and fix in repairs LED tube rod 20 Watt, 6500 K, 1200 mm long complete all as specified and directed.

Supply and fix in repairs Integral sleek CRCA housing box type luminaire suitable for ONE T8 LED tube light with white acrylic cover suitable for upto 1x20 watts LED tube light.

Supply and fix in repairs switch piano 5 Amps one way flush type, matching with existing make, ISI marked, all as specified and directed.

Supply and fix in repairs Socket outlet 3 pin, 5A, flush type combination , 3 pin, 5 Amps flush type, ISI marked, all as specified and directed.

Supply and fix in repairs switch socket combination 16 Amp, flush type, ISI marked, all as specified and directed.

Supply & fix in repair single pole and neutral enclosure with a two pin and earth plug and socket complete with one double pole MCB 240 volts 20 Amps all as specified and directed.

Supply and fix wiring for circuit/submain wiring alongwith earth wire with 4x 6.00 sqmm + 2x6.00 sqmm earthwire of FR PVC insulated copper conductor, single core cable in surface/recessed as required in PVC casing caping complete all as directed.

Supply and fix in repair for energy saving environment friendly 100 Watt LED industrial highbay luminaire, AL PDC housing LED canopy luminair with toughened glass. 120 lm/w efficiency equiped with 4 screws for ease of maintenance, 4kV in-built and 10 kV external surge protection provided for additional safety, at any height, IP 66 protection rating, cradle is provided for ease of installation, complete all as specified and directed.

Supply & Fix in repairs PVC holder complete all as specified and directed.

Supply & Fix in repairs 3 phase motor DOL starter for industrial exhaust fans complete all as specified and directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP of 5 to 32 Amps current rating complete with connection testing and commissioning all as specified and directed.

Supply and fixing amp rating 415V, 10KA 'C' curve miniature circuit breaker (MCB) TPN 40 to 100 Amps current rating complete with connection testing and commissioning all as specified and directed.

Supply and fix in repairs five stepped type electronic fan regulator fluch type on the existing phenolic laminated sheet etc, 230 Volts single phase complete all as specified and directed.

Supply and fixing in repair LED luminaire 2 ft x 2 ft, 35/36 watt, 220 V AC surface mounting type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

S & F in repairs MCB Distribution board, TPN 415 Volt, 6 way, horizontal double door powder coated steel sheet enclosure for surface mounting fitted with 200 Amps bus bar and din channel complete all as directed.

Supply ,fix and complete installation of wall mounted, powder coated, Indoor LT timer panel of 100 Amps capacity, double door,IP 44 standard including aluminium bus bar ,01 No 100 Amps incomer MCCB complete all as specified and directed.

Outer shell shall be made of 2.00 mm CRCA sheet. Incoming 1-100A 4P 25kA MCCB, Release: TMF (Fixed thermal and fixed magnetic for power distribution),Type: A1C 125 - 1 Nos. 2 Extended Spreader Terminals-4P Front ES-8 pieces, MCCB Frame: A1- 1 Nos. 3 Red Indicating Lamp with integrated LED Voltage: 230V AC-1 Nos. 4 Yellow Indicating Lamp with integrated LED Voltage: 230V AC-1 Nos. 5 Blue Indicating Lamp with integrated LED Voltage: 230V AC-1 Nos. 6-Multifunction Meter (LCD display), 3Ph, Parameters: V, A, F, PF, kW, kVA,kVAR, kWh, kVAh, kVARh, Runhours, On hours, Phase angle, Interrupts, THD, Events (High-Low), Neutral Current, CL: 1, Aux Sup: 90-300V AC/DC, Size: 96X96, With: RS485- 1 Nos.7-100/5A Acc.Cl: 1 5VA Polycarbonate Encapsulated Rectangular Busbar Type Current Transformer, Model: Rish Xmer 62/20 (40) - 3 Nos. 8 6A 1P 10kA C-Curve MCB, Type: SB201 M C- 3 Nos. 9 32A Neutral Link, Channel Mounting, Color: Black/Grey

OUTGOING 63A 4P 10kA C-Curve MCB, Type: SB204 M C - 06 Nos Busbar 1-A Set of 200A 25kA Electrolyte Grade Aluminum Busbar 2-Aluminum Earth Busbar - 25x6mm TIMER FEEDER 1-AC3: 50A AC1: 100A 3P Power Contactor, Coil: 220-230V AC, Aux. Contact: 1NO+1NC, Type: AX50-30-11- 3 Nos. 2-Digital Time Switch (Crono),Voltage: 110 - 240VAC, Contact: 1 C/O, Base/DIN, 25 ON/OFF - 3 Nos. 3 Red Indicating Lamp with integrated LED Voltage: 230V AC - 3 Nos. 4-6A 2P 2Way Local - Remote/ Auto-Manual Switch with Center OFF, 60 Deg. Operation- 3 Nos. 5 10A 1P 10kA C-Curve MCB, Type: SB201 M C- 21 Nos Fabrication details Indoor Type, Wall Mounted, Single Front, Double Door, IP 44, Fixed Type, Compartmentalized Panel, Provision for 3 phase energy meter and cable alley, Front Access Structure, Door, Mounting Plate: 2mm, Gland Plate: 2mm undrilled Cable Termination At: I/C - Bottom & O/G - Bottom

AKSAISHA ENGINEERING (BID ID -3373282)

K.G.SHANKER (BID ID -3371715)

Ms V. S. NAYAK (BID ID -3366994)