COMPRESSIVE MAINT TO INTERNAL ELECTRICAL SYSTEMS AND REWIRING WITH CONNECTED ACCESSORIES AT SECTOR II UNDER THE AOR OF GE DEOLALI

Amount

M&L for Carrying out comprehensive maintenance of day to day for domestic area (For Sector-II Area) internal eletrification complaints by Collection from complaints cell daily between 9.00 am to 10.00 am and repairs in situ or attending of complaints of domestic area after rectifying complaines job card will be return on same date. Defects of the items such as switches, fuse wires, DB, MCB (light/ power), lamp holder (bracket, pandent, batten) bell/buzzer, push button, ceiling rose, capacitors and other similar electrical items/fittings, repairsing of geysers/ solar heater system etc including providing of small pieces of electrical wire of size 1.5 sqmm to 10 sqmm single core/ two core and length not exceding 1.5 mtrs complete all as specified and directed by Engineer-in-Charge (Note :- (i) any accessories as mentioned above found unserviceable shall be replaced under respective items of this Sch. seperately. However any minor requirement essential for making overall system serviceable is deemed to be included in the quoted rate of this item.

Note:- i) Contractor shall provide his authorised Cell/mobile No. and local address to contact and communicate the message for any break down/ Complaint received on Cell phone and contractor's rep will visit the office twice a day (0930 Hrs and 1430 Hrs) to collect the day to day complaints of any nature/type. (ii) Penalty for not rectifying the defect in time(within 72 hrs) will be charged to contractor and the amount of penalty @ Rs 1000/- per complaint will deducted from the due payment of contract. (iii) Manpower requirement for attending and completing day to day complaints will be depending upon the number of complaints which may vary day to day and cost of same is deemed to be included in quoted rate. Contractor is advised to quote accordingly. (iv) Complaints will be treated as rectified only after user's "Satisfactory slip "will be produced by contractor to concerned JE E/M/Rep of MES.

(v) Old material obtained from replaced items under this item shall be contractor's property and will be measured as per Schedule of credit. (vi) Cost of minor spares i.e, insulation tape, lugs, thimbles etc are deemed to be included in the quoted rate. Labour required to carryout the maint / repairss for all repairss including testing and commissioning shall be deemed to be included in item rate as quoted by the contractor.Items replaced shall be measured and paid seperately . (vii) Cost of T&P i.e, ladders, tools, brazing, welding, soldering required and transportation is deemed to be included in quoted rates. (viii) Making good the area / cleaning the area will be mandatory for the contractor & failing which penalty of Rs. 5000/- will be charged at each up stance

M & L for the following items in replacement if required against Sr item No.01 :-

PVC Wire single core multi strnderd FRLS of size 1.5 sq mm

PVC Wire single core multi strnderd FRLS of size 2.5 sq mm

PVC Wire single core multi strnderd FRLS of size 4.0 sq mm

PVC Wire single core multi strnderd FRLS of size 6 sq mm

S&F Switch piano flush button single pole one way 5 amps 230 volts

S&F Switch piano flush button single pole one way 15 amps 230 Volts

S&F Socket outlet 3 pin 15Amps Flush type 230Volts

S & F Bell push button SP 5 Amp, flush type.complete all as specified and directed

S & F Bell electric AC 230 Volts single pole ding dong type complete all as specified and directed

S & F ceilling rose of 65*25mm size bakelite coated three terminals complete all as specified and directed.

S&F in replacement of lamp angle /batten holder Bakelite complete all as specified and as directed.

S & F fan regulator 100 Watt electronic type for ceiling fan of size 900 mm to 1400 mm sweep working on 230 Volts AC supply with all necessary connections etc complete

S&F 16/18/20W LED tube with single side connection

S&F 16/18/20W LED tube with double side connection

S&F in replacement of electronic ballast of capacity 36/40watt,230-250Volt for FTL complete all as specified and directed.

S&F in replacement of electronic ballast of capacity 18/20/28 watt,230-250Volt for FTL complete all as specified and directed.

S&F 28/36/40w FTL Tuberod

S & F switch socket combination 5 pin 5 Amps flush type (multi purpose )

S & F switch socket combination 2 in 1, 5/6 pin, 5 and 15 amp flush type universal.

S&F Square Box for fixing Tubelight fittings

S&F in repairs 2.50 MFD 440V PL25X40PFT WW 100MM suitable for 1200/1400mm sweep ceiling fan

S&F in replacement bipin holder rotary type suitable for T8 FTL Lamp all as specified and directed by Engr-In-Charge

S & Fin replacement wooden board open recessed made out of 2nd class HW frame & 6mm thick plywood with 1mm thick laminated sheet top of size (25 X 20 X4) cm

All as per item No:-2.23 above but of size 30cm x 25cm x 4 cm all as specified and directed by Engr-in-charge

Supply & fix Modular bell push button 5A 1 Module complete all as specified and directed

Supply & Fix Modular switch one way 6A,1 Module complete all as specified and directed.

Supply & fix Modular switch one way 16A 1 Module complete all as specified and directed

Supply and fixing Socket 6A-2/3 pin combined 2 module complete all aspecified and directed.

Supply and Fixing Socket 6A/16A-2/3 pin combined 2 module complete all as specified and directed.

Suppy and fix modular fan regulator 120w with 360 degree rotational- 2 module all as specified and directed.

S&F in replacement Copper blallast 240V, 36/40W, VPIT open construction copper wound ferr magnatic ballast

S&F in replacement plastic laminated top sheet cover 3mm thick of size 5"X5" all as required at site including cutting for fixing the existing switches,sockets,fan regulators & drilling holes for fixing screws and providing 04Nos screws with washers for fixing the sheet to sunken box,wooden box

S&F in replacement plastic laminated top sheet cover 3mm thick of size 6"X5" all as required at site including cutting for fixing the existing switches,sockets,fan regulators & drilling holes for fixing screws and providing 04Nos screws with washers for fixing the sheet to sunken box,wooden box

S&F in replacement plastic laminated top sheet cover 3mm thick of size 8"X6" all as required at site including cutting for fixing the existing switches,sockets,fan regulators & drilling holes for fixing screws and providing 04Nos screws with washers for fixing the sheet to sunken box,wooden box

S&F in replacement plastic laminated top sheet cover 3mm thick of size 12"X8" all as required at site including cutting for fixing the existing switches,sockets,fan regulators & drilling holes for fixing screws and providing 04Nos screws with washers for fixing the sheet to sunken box,wooden box

S&F Socket outlet 3 pin 5Amps Flush type 230Volts

Taking down unserviceable carefully copper/aluminium point wiring (light, fan, socket or power) complete with teak wood battens including fittings such as switches, socket outlets, ceiling roses, pendent brackets, holders etc. but excluding fan regulators, tube light fittings and sketch fittings and making good disturbed surfaces of walls, floor etc.complete all as directed.

Material and labour for point wiring with stranded copper conductor PVC insulated unsheathed 1.5 Sqmm FRLS cable in and including PVC casing caping of suitable size with PVC boards of appropriate sizes and all requisite accessories such as PVC elbow,Tee,collers bend, PVC conduit for crossing etc. complete with PVC terminals box for mounting switches, sockets, fan regulators etc with one single core continuous 1.5 Sqmm,FRLS copper cable for earth wire complete all as specified and as directed for the following :-

One Light point controlled by one switch

One light point controlled by two two way switches.

One fan point controlled by one switch

One 5 pin socket outlet. 5 Amps on the same board.

One 5 pin socket outlet. 5 Amps on the independent. Board

One bell point controlled by one switch.

All as item No- 4 above but One 15 A socket outlet independent with 2.5 sq mm PVC cable and 1.5 sqmm cable as earth continuity wire.

Supply and fixing 20w LED Compact commercial batten for single T-8 LED tube Suitable for 4 feet long LED Tube rod wih 20w LED Polycarbonate T8 Tube rod,4 feet long with inbuilt driver metal heat shrink,double sided connection all as specified and directed by Engr-in-charge.

S&F Wall mounted LED Light, 4 feet long with 18w LED Tube rod and batten single side connection type complete all as specified and directed by Engr-in-charge

S & F in replacement double door sheet metal enclosures factory made TPN DBs, protection class IP-43, Conforms to 8623-1 & IEC 61439-1 & 3 ,IK Double door DBs ,Available in CRCA Sheet metal, ready to use DBs-Provided with 100A insulated phase bus-bars/neutral bar/s with shroud/earth bar/sticking saddles/cement spill protector/colour coded interconnecting wire set/Cable ties/blankingbplates and circuit identification lables,with provision for FP MCCB/Isolator / as incomer and incomer and SP MCBs as outgoing

S&F in repairs Double door Vertical Triple pole +Neutral DBs, protection class of IP-43, Conforms to IS 8623-1 &3,AS Per IEC 61439- 1&3, Available in CRCA Sheet Metal,provided with insulated vertical phase bus-bars/neutral bars with shrouds/earth bars/sticking saddles/cement spill protector/color -coded interconnecting wire sets/cable ties/ blanking plates and circuit identification labels,with provision for MCCB as incomer and SP/TP Mcbs as outgoings all as specified and directed.

S & F in replacement double door sheet metal enclosures factory made DBs 4 way,240 volts,protection class IP-43, SUITABLE FOR FIXING OF MCBs,Isolators etc,confirming as per IEC 61439-3,Suitable for flush Mounting and surface mounting, With Neutral bar,Earthbar and cable ties for cable management,fully shrouded Neutral bars,prefitted masking sheet complete all as specified and as directed.

S & F in replacement double door sheet metal enclosures factory made DBs 8 way,240 volts,protection class IP-43, SUITABLE FOR FIXING OF MCBs,Isolators etc,confirming as per IEC 61439-3,Suitable for flush Mounting and surface mounting, With Neutral bar,Earthbar and cable ties for cable management,fully shrouded Neutral bars,prefitted masking sheet complete all as specified and as directed.

S & F in replacement double door sheet metal enclosures factory made DBs 12 way,240 volts,protection class IP-43, SUITABLE FOR FIXING OF MCBs,Isolators etc,confirming as per IEC 61439-3,Suitable for flush Mounting and surface mounting, With Neutral bar,Earthbar and cable ties for cable management,fully shrouded Neutral bars,prefitted masking sheet complete all as specified and as directed.

S&F MCBs Single Pole of 240 volts 5-32 Amps,10KA Capacity, 'C' Series of

S&F MCBs Single pole + Neutral 240 Volts,32-63 Amps,10KA Capacity 'C' SERIES OF

S&F Triple pole + Neutral 415 Volts,40-63 Amps,10KA Capacity 'C' SERIES

M & L in repairs sub main wiring with 2 single core, 6 Sq. mm, PVC insulated unsheathed,multi stranded copper conductor FR cable 1100 Volts grade including 4 Sqmm PVC insulated unsheathed multi stranded copper conductor FR as continuous earth wire drawn through conduit /casing caping and connecting to common earth terminals complete all as specified and as directed. Note :- (i) Two runs of copper cable and one run of earth wire including conduit /PVC casing/caping shall be measured as one length.

All as per item No -16 above but with 2 runs of 4 Sqmm cable with one run of 2.5 Sqmm cable for earthing.

M & L in replacement of sub main wiring with 2 single core, 10 Sq. mm, PVC insulated unsheathed,multi stranded copper conductor FRLS cable 1100 Volts grade incl 6.0 Sqmm PVC insulated unsheathed multi stranded copper conductor FRLS as continuous earth wire and connecting to common earth terminals complete all as specified and directed in Existing conduits/ PVC capping- casing. Note :-(i) Two run of copper cable and one run of earth wire shall be measured as one length. (ii) If Casing- capping required at site, they will be measured and paid under respective items

M & L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground all as specified and directed (earth pit not less than 2.25m below normal ground level) with top edge of the plate not less than 1.5m below normal ground level connected to GI wire 4mm dia by means of bolts, nuts, check nuts & washers of galvanized iron all as shown in Electrical Plate No. 3 connected to earth test point all as specified or indicated and testing on completion including necessary excavation and earth work in any type of strata, PCC pit and RCC cover, GI protection pipe 15mm bore light grade , watering pipe, wire mesh etc. all as specified and directed by Engineer-in-Charge.

M&L in replacement of u/s MCCB of 4 pole 100 Amps 415 Volts with breking capacity 16 KA of make Havells/ Legrand / L&Tcomplete all as specified and directed by Engr-in-charge. Make: Legrand / L&T/ Seimens or equivalent

S&F Building security light fittings, with deep down aluminium housing, suitable for 30 W LED, complete pre-wired, incl suitable bracket all as specified and as directed.

S&F Post top Latern of 25W 5700k New generation ,energy saving,environment friendly,long life aesthetically designed with symmetrical light distribution,spun aluminium landscape luminarie with high power LEDs as light source .

M & L for bracket made out of GI tubing 40mm dia,light grade 1.5 mtr long including fixing with MS clamps -2 Nos made out of 50mm wide 5mm thick flat iron with M.S. nuts, bolts 75 mm long 12 mm dia -4 Nos & flat washer (3mm thick) 01 No. for each including preparation of steel surfaces and painting with two coats of aluminium paint over one coat of red oxide to the M.S clamps & bracket etc complete all as specified and as directed.

M & L in repairs sub main wiring with 4 single core, 6 Sq. mm, PVC insulated unsheathed,multi stranded copper conductor FR cable 1100 Volts grade including 4 Sqmm PVC insulated unsheathed multi stranded copper conductor FR as continuous earth wire drawn through conduit /casing caping and connecting to common earth terminals complete all as specified and as directed. Note :- (i) four runs of copper cable and two run of earth wire including conduit /PVC casing/caping shall be measured as one length.

S&F Linear & compact 9W LED 6000k mirror Light with decorative grey end caps,Pokycarbonate body and ripped opal diffuser. Make :- Havells / Bajaj/ Wipro or equivalent

S&F Decorative Wall Light made up of high grade engineering plastic material having with 5W LED Make :- Havells / Bajaj/ Wipro or equivalent

S&F Energy Saving IP65 JETA NEO 50W LED 5000K Flood Light luminaries with power COB LED as Light source as as specified and directed by Engr-in-charge.

S&F PVC Conduit pipe of 20mm size for Conduit rewiring specified and directed by Engr-IN-Charge

S & F Recess mounting 34W LED 6000K luminaire fixture diffused suitable for ceiling size 2'X2'(Feet) (580X580 mm), fixture size (595X595 MM) armstrong / grid/ POP Ceiling with separate eletronic driver & High brightness LEDs including required accessories and eletric connections complete all as specified and as directed. Make :- Havells / Bajaj/ Wipro or equivalent

Supply and fix in replacement of PVC casing/caping of size 32 mm with all requisite accessories i.e. junction box, inner& outer corners,bends, tees,collers ,reducers etc complete all as directed.

S&F 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheateing of PVC tape and overall PVC sheated in service connection suspended by insulating s not more than 1 mtr apart including 4 mm suspension wire, one twin core cable flat or circular of size 6 sqmm 2 core incl taking down old us cable all as specified and all as directed by Engr-in-Charge.

All as per item ser No 31 as above but 10 Sqmm 2 core

Supply & fix 12W LED 6000K slim surface mounted round LED Panel al die cast body with premier to ensure glare free & even distribution of light Make :- Havells / Bajaj/ Wipro or equivalent

Supply & Fix LED Trimclip of 22w insquare shape Aesthethically designed for both recessed and surface mounting in same fixtures all as specifiedand directed by Engr-in-charge Make :- Havells / Bajaj/ Wipro or equivalent

S&F outdoor luminarie landscape Bamboo IP-65 of 8W 5700K(1000mm) new generation energy saving environment friendly long life aesthetically designed aluminium landspace luminaries for diffused lighting with power LED as light source

S&Foutdoor luminarie landscape Bamboo IP-65 of 8W 5700K(0.5m) new generation energy saving environment friendly long life aesthetically designed aluminium landspace luminaries for diffused lighting with power LED as light source

S&F 120W Energy saving,environment friendly and robust Highbay/Medium Bay LED IP65 Luminaries with high efficacy all as specified and directed by Engr-in-charge. Make :- Havells / Bajaj/ Wipro or equivalent

S&F LED PL-L, 4 pin, 18 Watt, suitable for installation in existing PL-L holder Make :- Havells / Bajaj/ Wipro or equivalent

S & F sheet metal enclosure single pole and neutral with two pin earth plug and socket complete with one single pole MCB 20 amps, 240 volts complete all as specified.

S&F 10W LED 3000K Crysta chip on board (COB) Wallwasher with crisp light throw and high CRI the wallwasher Makes it easy to hightlight features on the wall while being mounted in the ceiling all as specified and directed by Engr-in-Charge Make :- Havells / Bajaj/ Wipro or equivalent

S&F LED driver of 8/15/28 W LED Fittings all as specified and directed by Engr-in-charge Make :- Havells / Bajaj/ Wipro or equivalent

S&F LED driver for 34 W LED Ceiling light fittings Make :- Havells / Bajaj/ Wipro or equivalent

Note: Amount of sch of credit of Rs.71,170/-will be deducted from total amount of BOQ.

MAHIMA CONSTRUCTION

sapana enterprises

Shree Sai Samarth Enterprises