PROVN OF AIR CONDITIONER 1.5 TON WITH STABILIZER AND REQD ACCESSORIES TO MED STORE OF MH BAKLOH, FALSE CEILING, 02 LED CEILING LIGHTS AND MISC WKS IN BLDGS NO T-06 DINING HALL AND PROVN OF PORCH TO OFFRS MESS AT DALHOUSIE CANTT

Amount

Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 3 star rating and EER 3.2 of capacity 1.5 Ton complete all as directed and specified by Engr-in-charge.

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 01 KVA.

Taking down carefully copper/aluminium point wiring (light ,fan,socket or power) complete fixture and fittings such as switches ,ceiling rose, regulators,sockets etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separatly) and making good disturbed surfaces of wall, floors etc.

M & L for point wiring with copper conductor cable multistrand, PVC sheathed 1.5 Sqmm size(two run with colour code RYB) for one light point ,fan point, exhaust fan point,or bell point controlled by one switch including one run of 1.5 Sqmm (as continous earth wire Green)multistrand PVC concealed conduit of approved size and quality ISI marked,including all other required accessories as specified in preamable 1(a) to (q) of section 19 of SSR Part-II under heading 'point wiring' fixedon wall/ceiling including sunk cast iron terminal boxes grouting/flushing on wall for mounting fittings like switch,sockets etc covered with 3.00 mm thick plastic laminated sheet top cover of brick masonary/Stone masonary wall complete including cutting,chasing,pinning and making good the disturbed surface by using cement mortar 1:3 complete all as specified and directed by Engr-in-charge.Make of wire/cable-Havells/Anchor/Finolex,(Note:-the rate for concealed type point wiring shall deemed to include the cost of cutting,chasing in wall by using electric cutter and making good the disturbed surface of wall by providing cement plasterand matching the surface by white wash/colour wash all as per existing finishes complete).

All as per Srl item No 2 here in before but for one 5 amps socket out let on same board.

All as per Srl item No 2 here in before but for one 5 amps socket out let on independent board.

All as per item No 2 above but for power point 3 pin switch socket 16 Amp with PVC insulated copper conductor cable multistrand unsheathed 4 Sqmm (two run with colour code RYB) on independent board including one run of 4 Sqmm multistrand PVC sheathed copper conductor cable for earth continuity in cocealed PVC conduit of appropriate size and best quality ISI marked, including all other required accessories as specified in preamble 1(a) to (q) of Section-19 of SSR Part-II under heading "Point wiring" fixed on wall including sunk cast iron or PVC terminal boxes for mounting fittings like switch, sockets etc covered with 3.00 mm thick plastic laminated sheet top cover all as specified and as directed.

Supply & Fixing Switch piano, flush button, single pole one way 6 Amps

Supply & Fixing Socket outlet 3 pin, 6 amps flush type.

Supply & Fixing Switch piano, flush button, single pole one way 16 amps

Supply & Fixing Socket outlet 2 in 1,3 pin 5 and 16 amps flush type.

Supply and fix ceiling rose 65X50 mm two to three terminals complete all as specified.

S & F in replacement of tube light fitting box type suitable for LED 18W/20W Tube Rod with decorative colour and cap made out of CRCA sheet powder coated complete with housing with all accessories pre and making connection with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fitting including 18/20W LED tube rod 4 feet long complete all as specified and directed. Make:- Havells /Wipro /Crompton

S & F in replacement (including taking down old fitting) LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.Make : Havells/ Bajaj/ Crompton/ Phlilips all as specified and directed.

Supply & Fixing Sheet metal enclosure for DB,s, double door (when MCB,s to be used) single pole & neutral 8 way with 200 amps rated bus bar 240 volts with fixing arrangements including taking down ICDP/DB's any type including taking down of kitkat fuse/MCB SPN/SP as directed by Engineer-in-charge. Cat Part No CSDBSPNSD08 of C&S, or equivalent in Havells/Legrand

Supply and fixing MCB single pole and nuetral 6 to 40 Amps, 240 volts complete all as spd and directed. Make C&S, Havells, Legrand, L&T

Supply and fixing MCB single pole 6 to 32Amps, 240 volts all as spd and directed. Make C&S, Havells, Legrand, L&T

M & L for sub main wiring with 10.0 sqmm copper conductor cable multistrand, FRPVC sheathed two run (as phase and neutral) and run 10.0 Sqmm multistrand PVC sheathed copper conductor cable for earth continuity in drawn in one pvc concealed wiring complete all as specified and directed by Engr-in-charge.(Note:-the rate for concealed type point wiring shall deemed to include the cost of cutting,chasing in wall by using electric cutter and making good the disturbed surface of wall by providing cement plasterand matching the surface by white wash/colour wash all as per existing finishes complete).

S&F 0.5 mm thick pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete all as specified and directed.

M & L for Steel work in tubular trusses and frame work including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240,6mm angle used as in steel complete all as specified and directed.

Excavating in post holes in any type of soil n. exc. 0.50 cum getting out returning filling in and ramming earth or brocken rubble mixed with earth around, in layers not exceeding 25 cm watering, and removing surplus soil to a distance n. exc. 50 m and making good surface.

M&L cement concreteType B2 1:2:4 40mm grade stone aggregate as in foundation filing complete all as specified and directed.

M&L prepration of new surface of steel surface of any description, not otherwise described, over 10cm width or girth with two coats of synthetic enamel paint over a coat of red oxide, complete all as specified and directed.

M& L steel iron base plate plugs, bolts, and screws of Fe 410-W(Gde-E-250 Quality -A) complete all as specified and directed.

S&F angles as in posts and struts in fencing including cutting top to shape as direct, drilling holes, notiching for wire etc, flat iron fillet (for securing wire mash etc) incl all necessary drilling bolting or reveting,etc and similar work conforming to Fe410-0 or Fe-310-0.

M & L for PCC 1:4:8 (Nominal mix) using 40mm graded aggregate as in foundation mass concrete all as specified.

Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Chief

5mm thick plain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site.

Sheet glass, 5.5 mm ordinary quality and glazing with glazing pin in square exc 0.5 sq. m in each pane for aluminium door windows

False ceiling of 8 mm thick gypsum tiles (600x600mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film (shade either plain white or crack) fixed using T grid/Cross-T/Wall angle/level clip & suspenders of standard galvanised sections in a grid size of 600x600mm of manufacturer M/s Saint Gobain or equivalent of Armstong/Everest including taking down existing ceiling board & grid work etc of any type/pattern complete.

Taking down cement plaster or any description including raking out joints, hacking for key, scrubbing down with water etc and removal of debris to a distance not exc 50 mts and depositing where directed.

M&L for rendering 10 mm thick cement plaster concrete surfaces or fair faces of brick work in CM (1:6) surface finished even and smooth w/o using extra cement complete all as specified and as directed.

M&L for applying two coats of oil bound distemper on wall on new plasted surfaces including preparation over a coat of Birla wall putty and a coat of JK Primer complete all as specified {(Make : Goodlass Nerolac (Super Acrylic), Asian Paints(Tractor Acrylic Distemper), Berger Paints (Bison Super) or equivelent)

M & L Coloured glazed ceramic tiles of size 300 x 200 x 7/450/350/7 mm thick as in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match,and including 10mm thick screed bed or bedding layer of CM (1:3) complete all as specified and directed.

VISHNU DUTT AGANIHOTRI & SONS (BID ID -3296131)

M/S RAJESH SHARMA & CO. (BID ID -3296156)

M/S ANSHUL ENTERPRISES (BID ID -3297150)

M/S SHRI RAM BUILDERS (BID ID -3297086)

M/s Shakti Electric Works (BID ID -3302329)