Loading…
Loading…
Tender Value
₹6 L
EMD Value
₹15,000
Closing Date
18 Aug 2026, 9:30 pmClosed
Directorate of Municipal Administration
V. M Naganakeri
Repair of commercial Shop No. 51 (Katha No. 4/A) owned by Ainapur Town Panchayat.
DMA/2026-27/BD/WORK_INDENT61425
DMA/2026-27/BD/WORK_INDENT61425
Open
Buildings
Electronic Documents, First(One Cover)
DMA Town Panchayat Ainapur
5 documents required · 5 mandatory
₹500
₹15,000
6 Aug 2026
6 Aug 2026
18 Aug 2026
Repair of commercial Shop No. 51 (Katha No. 4/A) owned by Ainapur Town Panchayat.
Demolishing R.C.C. work manually/ by mechanical means including stack-ing of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. ...
Filling available excavated earth excluding rock) in trenches, plinth,sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ram...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement: 6 coarse sand) including cost of all materials, labour, sca...
Providing 12 mm cement plaster with cement mortar 1:4 (1 cement:4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffol...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...
Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, lai...
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
Providing & fixing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete as per design d...
Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to13:8130-1984 and virgi...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing 32A security and energy saving DP switch with key tag suitable to operate on 230 V, 50Hz AC supply & completely wired on existing box.(Comman SR-21-22,Vol-6)I.NO-3.70 Page No-6
Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.(Comman SR-21-22,Vol-6)I.NO-5.7.1 Page No-10)
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Point wiring using copper wire with switch.: Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) ...
Wiring for lighting power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. a) 6 Amps SP Switch (Comman SR-21-22,Vol-6) I.NO-3.14.1 Page No-6 ) a) 6 Amps SP Switch
Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. a) 6 Amps SP Switch (Comman SR-21-22,Vol-6) I.NO-3.14.1 Page No-6 ) 6 Amps 3 Way 5 Pin Socket
Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. a) 6 Amps SP Switch (Comman SR-21-22,Vol-6) I.NO-3.14.1 Page No-6 ) c) 6 Amps Bakelite Ceiling Rose
Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. a) 6 Amps SP Switch (Comman SR-21-22,Vol-6) I.NO-3.14.1 Page No-6 ) d) 6 Amps Lamps Holder
Supplying and fixing of Surface mounting type retrofit type LED tube W comprising of LED linear source with CCT 6500 degree K CRI70. efficacy 80 lumen per W life 25000 burning hours and Compliance t...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
KW1 2.doc
Tender Document • 0.42 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .