SPECIAL REPAIR TO BLDG NOT 56 AT MW LINE OF 512 ABW AND ADDITION ALTERATION OF ORs MD BLDG NO P 98 AT RA LINE OF CAFVD UNDER GE CENTRAL KIRKEE

Amount

Taking down chowkats and frame areav n.exc 1.5 sqm each including shutters without taking off shutters from the frame and removing from site complete all as specified and as directed.

Taking down chowkats and frame area exc. 1.5 sqm but n.exc. 4.00 sqm each including shutters without taking off shutter from the frame and removing from site complete all as specified and as directed.

Taking down shutters of any description area exc. 1.00 sqm but n.exc 2.00 sqm each resecuring, easing , adjusting and re-fixing in same opening after minor repairs like changing of butt hinges and including all necessary fittings complete all as specified and as directed.

Taking down shutter of any description area n.exc 1 sqm each and removing to store complete all as specified and as directed.

Supply and fix pressed steel door frame for doors of size 105 x 60mm with single rebate including necessary fixing lugs, hinges, lock strike plate, etc complete including and of hollow section of frame with and including plain cement concrete(1:2:4), type B-0 complete all as specified and as directed.

Supply and fix pressed steel frames made of 1.25 mm thick MS sheet size 125x60mm for doors, ventilators with double rebates including necessary fixing lugs, hinges, lock strike plate etc, including plain cement concrete(1:2:4) type B1 using 20mm graded stone aggrgate to fill the frame and making good complete all as specified and as directed.

Supply and fix 35 mm thick factory made shutters of second class hard wood plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated supplied and fitted to chowkat complete all as specified and as directed.

Material and labour for 35 mm thick second class hard wood glazed/gauzed and skelton door shutters, factory made, open rebated and prepared to receive glass/guage etc., (without sash bar) edges of frames, plain, chamfered or rounded, fitted with cut & mitred beads for securing glass/guage etc size of member as specified in SSR Part I Section 8 clause 8.24(a) and fixed to chowkat, complete all as specified and as directed.

Supply and fix galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and as directed.

Supply and fix in repairs mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate fixing in wooden or steel door frame using nails or welding complete all as specified and as directed.

Supply and fix in repair Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and directed.

Supply and fix 25mm thick flush door shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides both face is covered with decorative face veneers with lipping/frame to match as in cupboard door shutters complete all as specified and as directed.

Supply and fix in repairs 18-19mm thick prelaminated particle board prelaminated both sides, grade 2 quality interior grade commercial type including 6 mm thick teak wood lipping, as in shelfs of cupboards, kitchen cabinet, pelment box and in similar works complete all as specified and as directed.

Supply and fix mild steel continuous (piano) hinges, bright finish or electro galvanised, width of flaps (when open) in 40mm complete all as specified and as directed.

Supply and fix 100mm hasp and staple, safety type, aluminium with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

Supply and fix 100mm long stainless steel medium weight butt hinges for door shutter and frames/welded to frames complete all as specified and as directed.

Material and labour 200mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and as directed.

Material and labour 150mm long mild steel pressed handles, oval type, stove enamelled black complete all as specified and as directed.

Supply and fix 300mm long mild steel sliding door bolts, bolt or clip type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.

Supply and fix in repairs 150 mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and as directed.

Supply and fix factory made internal PVC door frame of size 50x47mm single rebated made out of extruded 5 mm PVC foam sheet, mitre cut at two corners and jointed with 02 Nos of 150 mm brackets of 15x15 mm MS square tube, two vertical door profiles are to be reinforced with 40x20 mm MS tube of 19 gauge through out the frame complete all as specified and directed.

Providing and fixing 30mm thick FACTORY MADE MOULDED DOOR SHUTTER ‐ WOOD FREE consisting of frame made out of M.S. tubes of 19gauge thickness and size of 25mm x 25mm for stiles, top and bottom rails. M. S. frame shall have a coat of steel primers. The inner panel shall consist of 25mm thick EPS of Density 23 Kg /Cbm. bonded with 2mm thick termite proof, water proof and fire resistant moulded PVC Sheet Manufactured by an ISO‐9001‐2015 certified company, with 2, 4, 6 raised panel design in different plain and / or prelam colours after routing the Moulded design on one side & 2mm plain and /or prelam PVC sheet on other side of the EPS. The edge of panel to be sealed with lipping of 15mm wide PVC sheet baton ( made by sticking 2mm rigid foam PVC sheets of 5mm (±0.25) thickness using PVC solvent cement ) and stile sides 25mm (5mm x 5nos.) thick and 30mm width PVC Sheet fitted along M.S. tube for hardware provision & for lock 25mm thick ( 5mmx5nos. ) PVC sheet of size 150mm x 200mm fixed with inner side of EPS Panel etc. complete all as per specification & drawing and as directed by Engineer-in-charge.

Supply and fix 75mm long stainless steel medium weight but hinges for door shutter and frames complete all as specified and as directed.

Supply and fix aluminium anodised barrel tower bolts of extruded section and fixed 150 mm long complete all as specified and as directed.

Supply and fix aluminium anodised handle, of size 150mm, fixed with screws or welded, complete all as specified and as directed.

Supply and fix aluminium powder coated window, sliding type (3 track) with frame of size 100x35x1.2mm thick and shutter frame size 39.40x17.70x1.2mm thick with two glass shutter and one mesh shutter including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws with and including 4mm thick plain float glass and 0.36mm dia apperture 1.4mm SS wire mesh and fittings etc and making good the jambs and painting with existing surface matching complete all as specified and directed by Engr-in-Charge.

Material and labour Machine cut cudapah stone slab 20-25mm thick as in steps, jambs, pillars, cooking platforms, and like over 15mm thick cement screed base in CM (1:4) and jointed in grey cement slurry mixed with pigment to match with shade of slab rubbing , polishing and rounding to edges including demolition of existing cill/cooking platform complete all as specified and as directed.

Material and labour 20mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills, cooking platforms and like over 15mm thick cement screed base in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling of existing PCC beds/Granite complete all as specified and directed.

Supply and fix aluminium louvered ventilators of section size 80mmx20mmx1.50mm including 5mm thick frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc. making good the jambs and painting with existing surface matching complete all as specified and directed by Engr-in-Charge

Supply and fix rolled mild steel framed work such as grill, grating etc with ends bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors and similar work conforming to Fe 290 Gde E-165 complete all as specified and as directed.

Material and labour preparation of new steel and iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

Material and labour preparation of old painted steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamal paint complete all as specified and as directed.

Material and labour preparing new or previously untreated wood surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

Material and labour preparing old wood or wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Demolition of existing lime concrete of any description and in any position not otherwise specifically provided for, including removing of debries complete all as specified and as directed.

Material and labour plain cement concrete, (1:5:10), type E-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete in sub base of floor complete all as specified and as directed.

Material and labour for providing water proofing treatment to the sunken portion areas as per the following :- (a) Preparation of sunken surfaces of wall or concrete and providing 10 mm thick rendering in cement mortar (1:3) mixed with WPC @ 3 % by weight of cement and applying evenly a coat of blown bitumen at the rate of 1.5 kg per square metre and binding with clean dry sand @0.005 cum per square metre complete all as specified and as directed. (b)GI pipe 40mm bore light grade shall be embedded as outlet at the lowest portion for slope on the wall extending upto at least 450 mm beyond the outer wall. NOTE :- Rate for WPC deemed to be included in the quoted rate.

Removing old tar felt, all loose dirt, old roof tiles, including taking down cement plaster cleaning the concrete surface including removal & cleaning of vegetation, fungus, moss, small trees etc from the roof top with wire brush, removing the strips of lightening conductor including refixing the same after repair work, rendering 15mm thick on existing concrete surfaces of roof in CM (1:4) mixed with water proofing compound @ 3% by weight of cement finishing the surfaces even and smooth without using extra cement over and including applying neat cement slurry @ 1.5Kg/Sqm complete all as specified and as directed by Engineer-in-Charge.

Taking down cement of cement lime plaster of any description at any position on brick or stone or PCC block walls, chajja etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by the Engineer-in-Charge.

Material and labour rendering 12mm thick on fair faces of brick /stone or concrete surfaces of wall in CM (1:6) complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for 20mm thick cemet plalster in CM (1:4) over stone wall / concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Material and labour 5mm thick rendering on concrete surface/chajja of ceiling in CM (1:3) and rendering is to be finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge.

Material and labour rendering 15 mm thick on fair faces on stone/ block masonry surfaces on walls in CM (1:4) finished even and smooth complete all as specified and directed by Engr-in-Charge. NOTE :- Waterproofing compound paid and measured separately.

Material and labour for rendering 15 mm thick on fair faces on stone/ block masonry surfaces on walls in CM (1:6) finished even and smooth complete all as specified and as directed by Engr-in-Charge.

Supply only liquid water proofing compound complete all as specified and as directed

Demolition of brick /stone/block walls built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed by the Engineer-in-Charge.

Material and labour walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for precast cement concrete block masonry of grade C-5 having density not less than 1800 kg/cum and 28 days average minimum compressive strength of block should be 5 N/sq.mm as in walling set in cement mortar (1:6) complete all as specified and as directed.

Material and labour preparation of new plastered wall surfaces and applying 3mm thick wall care putty to get smooth and even surfaces as directed and applying two coats of oil bound emulsion distemper over a coat of alkali resistant primer complete all as specified and as directed by Engineer-in-Charge.

Material and labour preparation of old plastered wall surfaces and applying 3mm thick wall care putty to get smooth and even surfaces as directed and applying two coats of oil bound emulsion distemper complete all as specified and as directed by Engineer-in-charge.

Material and labour for three coats of white wash on newly plastered surfaces of walls including preparation of newly plastered surfaces complete all as specified and as directed by Engineer-in-charge.

Material and labour two coats of white wash on walls including preparation of old decorated surface complete all as specified and as directed by Engineer-in-charge.

Material and labour preparation of old decorated plastered or unplastered surfaces of wall, cornices etc by brooming down or steel wire brushing, scraping down, smoke soot, moulds, moos efflorescent and trading oil and greasy spots and applying two coats of cement base paint of approved tint complete all as specified and as directed by Engineer-in-charge.

Material and labour preparation of new decorated plastered or unplastered surfaces of wall, and applying two coats of cement base paint of approved tint over a coat of alkali resistant primer complete all as specified and as directed.

Material and labour applying three coats of white wash on ceiling including preparation of newly plastered surfaces complete all as specified and as directed by Engineer-in-charge.

Material and labour one coat of white wash on ceiling including preparation of old decorated surfaces complete all as specified and as directed by Engineer-in-charge.

Material and labour cement concrete type B1 1:2:4 (20mm graded aggregate) as in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, complete all as specified and as directed by Engineer-in-charge.

Supply and fix rotational moulded polyethylene water storage tank of approved colour, 500 litre capacity consisting of triple layered cylindrical vertical with top closed hoisted and fixed in position including dismantling and removing of old tank complete all as specified and as directed by Engineer-in-charge.

Supply and fix in repairs 20 mm dia gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed by Engineer-in-charge.

Supply and fix in repairs 20 mm dia ball valves, high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule all as specified and as directed by Engineer-in-charge.

Taking up or down 15mm bore existing steel tubing and connections including cleaning for refixing or removal to stores complete all as specified and as as directed.

Taking up or down 20mm bore existing steel tubing and connections including cleaning for refixing or removal to stores complete all as specified and directed.

Supply and fix 15mm bore GI water tubing medium grade galvanised with all fittings and fixed to walls and ceilling or laid in floor complete all as specified and as directed by Engineer-in-charge.

Supply and fix 20mm bore GI water tubing medium grade galvanised with all fittings and fixed complete to walls and ceilling or laid in floor complete all as specified and as directed by Engineer-in-charge.

Refixing 15mm or 20mm bore old steel water tubing and connection in new or old position (walls, ceilling, floor etc) complete all as specified and as directed by Engineer-in-charge.

Supply and fix in repairs bib tap long body, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle screw down, screwed for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as specified and as directed. MAKE:- Prayag Cat Part No 8308 or techno commercially equivalent makes specified in PS.

Supply and fix in repairs stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

Supply and fix brass chromium plated wall mixer bore dia 15mm for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed. MAKE:- Prayag Cat Part No 8375 or techno commercially equivalent makes specified in PS.

Supply and fix in repairs angle stop valve cast copper alloy chromium plated, fancy type with crutch or butterfly handle screwed down, screwed both end for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as specified and as directed. MAKE :- Prayag Cat Part No :8310 or techno commercially equivalent makes specified in PS.

Supply and fix in repairs stop cock (concealed) cast copper alloy chromium plated fancy type with crutch or butterfly handle screwed down, screwed both ends for iron pipe or brass ferrule with long shank and cup for 15 mm bore of pipe complete all as per Prayag Cat Part No 8318 or techno commercially equivalent makes specified in PS complete all as specified and as directed.

Supply and fix in repairs pillar taps chromium plated cast copper alloy with capstan heads screwed down high pressure with or without lettered Hot Or Cold with long screwed shanks and fly nuts screwed for iron pipes 15mm bore dia pipe complete all as per Prayag Cat Part No 8304 or techno commercially equivalent makes specified in PS complete all as specified and as directed.

Material and labour PVC valveless, syphonic action type, flushing cistern, 10ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets, connections to pipes and fixing of chain and pull, or lever, all as per ESSCO Cat No. WHE-WHT-183NL or techno commercially equivalent makes specified in PS fixed in repairs complete all as specified and as directed.

Supply and fix in repairs chromium plated shower rose 225mm round with arm and flange including fixing to steel pipe fixed in repairs as directed. MAKE :- Prayag Cat Part No BS -67 or techno commercially equivalent makes specified in PS.

Supply and fix in repairs chromium plated shower rose 100mm square with arm and flange including fixing to steel pipe complete all as per Prayag Cat Part No BS-30 or techno commercially equivalent makes specified in PS complete all as specified and as directed.

Supply and fix viterious china wash basin white flat back of size 550 x 400 mm excluding taps waste chain and plug and porcelain stopper but including necessary brackets CP wastes and other fittings complete all as specified and as directed.

Supply and fix in repairs vitreous china squatting pan "Orissa" pattern size 580mmx440mm white with integral foot rests including 10ltrs capacity PVC flushing cistern low levl with inlet, ball valve float chain and pull and brackets, flush pipe of polyethylene of low or high density or PVC 32mm dia for low level cistern complete all as specified and as directed.

Material and labour vitreous china wash basin white flat back size 580x450 mm excluding taps but including 32 mm dia CP waste fitting and PVC waste pipe 610 mm long and brackets all as per CERA Cat No S 2040109 or techno commercially equivalent makes specified in PS complete fixed in repairs complete all as specified and as directed.

Supply and fix in repairs 32 mm bore PVC waste pipe 1000mm long of approved make suitable for WHB, urinals etc complete all as specified and as directed.

Supply and fix grating doom 125 mm dia with/without waste hole of SS complete all as specified and as directed.

Supply and fix in repairs PVC floor trap square type with CP grating with or without hole including provision of jointing to waste pipes in run lead joint dia of outlet 75 mm, complete all as specified and as directed.

Supply and fix in repairs PVC connections 15mm dia with brass nut on both ends and washers 450mm long complete all as specified and as directed.

Supply and fix in repairs towel rail 450 mm long of PTMT fixed with and including chromium plated brass screw and wooden / plastics cleats ( min wt 170 gms) complete all as specified and as directed.

Supply and fix brass chromium plated tubular towel rail, 20mm dia, 50cm long all as per Prayag Cat No.BA-01 or techno commercially equivalent makes specified in PS fixed in repairs complete all as specified and as directed.

Supply and fix 110 mm dia PVC (SWR) pipe, type 'B', single socketed in any length with rubber ring joints laid in trenches, floor and wall including taking down old unserviceable pipe any description and any type complete all as specified and as directed.

Supply and fix PVC (SWR) pipes, type 'B', single socketed in any length with rubberring joints laid in trenches or in floors and wall 75mm bore including taking down old unserviceable pipe any description and any type complete all as specified and as directed.

Supply and fix in repairs PVC (SWR) bends, type 'B' 110mm dia bore any radius with access door complete all as specified and as directed.

Supply and fix in repairs PVC (SWR) bends type 'B' 75mm dia bore any radius with access door complete all as specified and as directed.

Supply and fix in repairs PVC (SWR) branch piece, type 'B' single (single Y) 110 mm dia equal or unequal complete all as specified and as directed.

Supply and fix in repairs PVC (SWR) branch piece, type 'B' single (single Y) 75mm dia equal or unequal complete all as specified and as directed.

Supply and fix in repairs 75mm bore PVC (SWR) junction type 'B' single (Single T) equal or unequal complete all as specified and as directed.

Supply and fix in repairs 110mm bore PVC (SWR) junction type 'B' single (Single T) equal or unequal complete all as specified and as directed.

Supply and fix in repairs 110mm bore PVC (SWR) vent cowl type 'B' complete all as specified and as directed.

Supply and fix in repairs 75mm bore PVC (SWR) vent cowl type 'B' complete all as specified and as directed.

Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Material and labour 25 mm thick plain cement concrete,(1:2:4), type B-1 using 20mm crushed stone aggregate as in leveling course including demolition of existing plain cement concrete complete all as specified and as directed.

Material and labour Non skid ceramic coloured tiles, joint free 7 to 8 mm thick (square or rectangular) area of each tile exc. 0.18 sqm but n.exc. 0.38 sqm, laid in floors set and jointed with neat cement slurry including pointing in white cement with pigment to match the shade of tiles, over and including screed bed or bedding layer of mortar 15 mm thick average thickness for laying floor finishes in cement mortar (1:4), complete all as specified and as directed.

Material and labour Non skid ceramic coloured tiles, joint free 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm (400X400X7mm) in skirting, over 10mm thick screed bed in CM (1:4) on walls set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade all as specified and as directed.

Supply and fix coloured non skid ceramic tiles 300 mm x 300 mm x 6 to 7mm thick, in floors set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in CM 1:6 all as specified and as directed.

Material and labour Glazed ceramic colour tiles in vertifical surfaces 450x350x7mm thick with necessary border etc set and jointed in neat cement slurry and pointed in coloured cement to match over including 10mm thick renderting / backing coat in cement mortar (1:4 ) all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any cement mortar complete all as specified and as directed.

Material and labour machine cut mirror polish Kota stone slab flooring 20-25mm thick over 15mm thick cement screed base in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including round nosing at corners, rubbing and mirror polishing complete as specified and as directed.

Material and labour machine cut mirror polish Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 10mm thick cement screed base in CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including round nosing at corners, rubbing and mirror polishing complete as specified and as directed.

Supply and fix in repairs stainless steel fancy type curain rod 25 mm dia including SS brackets, decorative knobs and including all necessary fittings such as rawl plug screws complete all as specified and as directed.

Supply and fix in repairs Shelf of Glass fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed. MAKE:- Prayag Cat No. BEA-49 or techno commercially equivalent makes specified in PS.

Supply and fix in repairs soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. MAKE :- Prayag Cat No. BA-25 or techno commercially equivalent makes specified in PS.

Demolition of cement concrete (unreinforced) in ground floor or pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engr-in-Charge.

Material and labour 75 mm thick plain cement concrete(1:3:6), type C2 using 40mm graded stone aggregate laid in panels surface finish even and smooth without using extra cement as in plinth protection complete all as specified and as directed.

Material and labour 100mm thick plain cement concrete(1:4:8), type D-2 using 40mm graded aggregate as in sub base over rammed earth complete all as specified and as directed by Engr-in-Charge.

Material and labour 25mm thick crushed stone dust / sand filling under floors or in foundations or in cable trenches including watering and consolidation complete all as specified and as directed by Engr-in-Charge.

Material and labour 80mm thick machine pressed glossy finish precast concrete interlocking paver blocks of any shape, size and approved colour, M-40 grade with grey cement and pigment conforming to IS 15658-2006 complete all as specified and as directed by Engr-in-Charge.

Dismantling at any height of single layer Mangalore pattern or similar tiles in roof coverings complete all as specified and as directed by Engr-in-Charge.

Dismantling at any height timber as in fillets, rail, posts rafter, purlins etc under 40 sq.cm in section in repairs complete all as specified and as directed by Engr-in-Charge.

Supply and fix pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

Supply and fix 1.00mm thick plain, glavanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade zinc coating 120 including dismantling old plain sheet complete all as specified and as directed by Engr-in-Charge.

Supply and fix rolled mild steel Fe-410- W(Gde E-250) quality 'B' as in roof trusses (framed), trussed, purlins, crane gantries, rails, fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and as directed by Engr-in-Charge.

Supply and fix rolled mild steel Fe-410- W(Gde E-250) quality 'B' for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed by Engr-in-Charge.

Supply and fix 1.25mm thick rolled mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed by Engr-in-Charge.

Supply and fix Gypsum reinforced boards 600x600x8-10mm thick for ceiling hot dipped galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white, the frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centres securely fixed to the structural soffits by approved hangers at 1200mm maximum centres, hangers of GI wire 4mm dia to be fixed by approved rawl plugs, level and justers and screws etc, The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall, flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runners at 600mm from adjacent center to form 1200x600mm moulds cross tee longer than 600mm to be supported independently, 600x600mm modules to be formed by fitting 600mm long cross tee centrally between the 1200mm cross tee, Tee perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacture instructions and finishing the surface by applying two coats of plastic emulsion paint of approved tint over coat of primer complete all as specified and directed by Engr-in-Charge.

Material and labour in Reinforced cement concrete design mix M-20 using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed by Engr-in-Charge.

Material and labour mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, slabs, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge.

Material and labour for TMT steel bars 8 mm dia, cut to length, bent to shape required, including cranking, bending and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed.

Material and labour extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and as directed.

Material and labour for precast cement concrete (1:2:4) type B1, using 20 mm graded coarse stone aggregate as in cover slabs set in CM (1:6) including necessary formwork complete all as specified and as directed.

Material and labour for plain cement concrete (1:4:8), type D2 using 40 mm graded coarse stone aggregate as in bed to drain pipes of 150 mm bore including forming cradles complete all as specified and as directed.

Material and labour for Reinforced cement concrete pipes 150mm bore, class NP2, laid in trenches and jointed complete with collars complete all as specified and as directed.

Material and Labour 10 users capacity readymade RCC hume pipe septic tank 90cm dia and 243cm long over and including PCC platform 75mm thick PCC (1:5:10) type E-2, using 40mm graded stone aggregates & 300mm thick approved moorum filling below PCC, 100mm dia PVC(SWR) vent pipe with cowl at top, connectors to inlet and out pipes, all as specified and shown on drawing No. CEPZ/91/TD/47M Sh 1/1/ dt 10/04/03 including excavation in any type of soil/rock, returning, filling in and removal of soil complete all as specified and as directed by Engr-in-Charge.

Material and labour for Soakage wells of size 1.20M diaX 1.5M effective depth excavation, in any type of soil, PCC 1:3:6 in foundation, walls of honey combed Brick masonry with top ring of RCC (1:1.5:3) including intercepting chamber and screen chamber made of Brick masonary in CM 1:6, RCC (1:1.5:3) cover slab / SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size all as speified and as shown in drawing No.CEPZ/90/TD/13 Sheet 1/1 dated 19.07.1990 and as directed by Engr-in charge.

Taking down copper/aluminium point wiring ( light, fan, socket, power ) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately ) and making good disturbed surface of walls, floors, etc., complete all as specified and directed by Engr-in-Charge.

Material and labour for surface point wiring with two single core PVC insulated unsheathed 1100 volts grade multi stranded FRLSH copper conductor cable of size 1.5 sq.mm drawn in and including PVC casing / caping of required size with all fittings and accessories along with one single core green colour PVC insulated 1100 volt grade multi stranded FRLSH copper conductor cable of size 1.5 sq.mm as earth lead and connected to earth dolly for one light point or one fan / exhaust fan or one bell point controlled by one, one way switch including PVC switch board of required size or 3mm thick hylam sheet screwed with 04 Nos cadmium coated screws & cup washer on existing MS concealed box for mounting of switch, regulators or bell push and casing caping terminal box for mounting ceiling rose/ holders etc completed all as specified and directed by Engr-in-Charge.

All as per Sl Item No. 131 above but for one three pin 5 Amps socket outlet point with cable of 1.5 sq.mm size on independent board.

All as per Sl Item No. 131 above but for one three pin 5 Amps socket outlet point with cables 1.5 sq.mm size on same board.

All as per item No 131 but FRLSH copper stranded cable of size 2.5 sq mm for 3/6 pin socket outlet 15 amp on one independent board. alongwith all fitting and accessories complete.

Material and labour for point wiring complete with 1.5 sq.mm single core PVC insulated but unsheathed multistranded copper conductor FRLSH cable 1100 Volts grade drawn through in and including PVC casing caping of required size with all fittings and accessories along with green colour FRLSH copper conductor cable of size 1.5 sq.mm as earth lead for one light point controlled by two, two way switch and connected to earth dolly with PVC switch board of required size or 3mm thick hylam sheet screwed with 04 nos cadmium coated screws & cup washer on existing MS concealed box for mounting of switch, regulators or bell push and casing caping terminal box for mounting ceiling rose/ holders etc completed all as specified and directed by Engr-in-Charge.

Material and labour point wiring complete with 1.5 sq.mm single core PVC insulated but unsheathed multistranded copper conductor FRLSH cable 1100 volts grade drawn through and including PVC heavy duty conduit (minimum 20 mm dia external) but shall be increased as per actual site requirement in accordance with clause 19.125 of SSR part-I, ISI marked including conduit accessories like bends, tees, junction boxes etc fixed concealed/ recessed in wall or ceiling etc including 1.5 sqmm PVC insulated but unsheathed multistranded copper conductor FRLSH cable as earth continuity wire including modular metal flush box with white/coloured top cover plate and frame of required modules for mounting of modular switches, sockets,bell push and fan regulators complete all as specified and as directed by Engineer-in-Charge. for the following:- (a) One light point /fan/exhaust fan /bell point controlled by one switch.

All as per Sl Item No.136 above but for one three pin 5 Amps socket outlet point with cable of 1.5 sq.mm size on independent board all as specified and as directed by Engineer-in-Charge.

All as per Sl Item No 136 above but for one three pin 5 Amps socket outlet point, with cable of size 1.5 sq.mm size on same board all as specified and as directed by Engineer-in-Charge

All as per Sl Item No. 136 above but FRLSH copper stranded cable of size 2.5 sq.mm for 3/6 pin socket outlet 15 Amps on one independent board all as specified and as directed by Engineer-in-Charge.

Material and labour for sub main wiring with two single core PVC insulated multi stranded FRLSH copper conductor cable of size 6.0 sq.mm drawn through in and including PVC conduit with all accesories and one single core green colour FRLSH copper conductor cable of size 6.0 sq.mm as earth wire and connected to earth dolly and making good to disturbed surfaces completed all as specified and directed by Engr-in-Charge. NOTE:- Two run of cable with one run of earth wire and one run of casing capping will be measured as one unit.

Supply and fix stepped type electronic fan regulator suitable for ceiling fans including necessary connections of capacity 100 watts. 240 Volt complete all as specified and as directed by Engr-in-Charge.

Supply and fix 5 Amps switch piano type single pole one way completed all as specified and as directed by Engr-in-Charge.

Supply and fix lamp holder of PVC/ polycarbonate type with back plate all as specified and as directed by Engineer-in-Charge.

Supply and fix socket flush type 6 Amps, 5 pin, 230v all as specified and as directed by Engineer-in-Charge.

Supply and fix 5 Amps switch piano type single pole two way complete all as specified and directed by Engr-in-Charge

Supply and fix 5 Amps bell push flush type complete all as specified and directed by Engr-in-Charge

Supply and fix socket outlet of 2 in 1 , 3 pin 5 Amps complete all as specified and directed by Engr-in-Charge

Supply and fix switch socket combination multipurpose outlet comprising of 3 pin 15 Amps socket out let & switch one pin, 5 Amps controlled by one switch suitable for 3 pin plug top all as specified and directed by Engr-in-Charge.

Supply and fix ceiling rose surface Bakelite three terminal all as specified and as directed by Engineer-in-Charge.

Supply and fix ceiling rose surface PVC 65 x 50 mm two/three terminals complete all as specified and directed by Engr-in-Charge

Supply and fix 5 Amp bell push flush type complete all as specified and as directed by Engineer-in-Charge.

Supply and fix lamp holder insulated body with back plate for batten/angle complete all as specified and directed by Engr-in-Charge

Supply and fix bell electric AC 240 volt, 50 Hz all as specified and as directed by Engr-in-Charge.

Supply and fix sheet metal enclosure for DBs SPN 8 way, double door type 230 volts complete all as specified and as directed by Engr-in-Charge.

Supply and fix in repairs MCB, single pole, 6 to 32 Amps, 240 Volts, 10 KA breaking capacity, ‘’B” curve complete all as specified and as directed by Engr-in-Charge.

Supply and fix in repairs MCB, SPN 40 Amps, 240 Volts, 10 KA breaking capacity, ‘’C” curve complete all as specified and as directed by Engr-in-Charge.

Supply and fix MCB DB double door 4 way TPN vertical with 200 Amps rated bus bar 240 volts complete all as specified and as directed by Engr-in-Charge

Supply and fix MCB TPN 40 Amps, 415 volt 10 KA complete all as specified and directed by Engr-in-Charge.

Supply and fix LED light batten 20 watt ,4 feet, AC, PF-0.95 (min), sleek and seamless profiled extruded aluminium batten with an efficient diffuser to illuminate work and retail spaces with three core flexible copper conductor cable from ceiling rose complete all as specified and directed by Engr-in-Charge. MAKE:- Wipro cat part No-LL20-221-XXX-65AL1 and techno commercially equivalent in CG/Philips/Havells

Supply and fix LED Light batten 10 watt, 2 feet AC, PF-0.95 (min), sleek and seamless profiled extruded polycarbonate batten with an efficient diffuser to illuminate work and retail spaces with three core flexible copper conductor cable from ceiling rose complete all as specified and directed by Engr-in-Charge. MAKE :- Wipro Cat part No-LL20-111-XXX-65NE3 and techno commercially equivalent in CG / Philips / Havells

Supply and fix LED Lamp 12 watt (B-22) pin type all as specified and directed by Engr in charge. MAKE :- CG/Bajaj/ Philips/Wipro

Supply and fix LED lamp 9 watt, CDL, E-27 230V, PF-0.95 (min) all as specified and directed by Engr in charge. MAKE :- CG/Bajaj/ Philips/Wipro

Supply and fix LED building security light 20 watt, 230V, with lens. PF-0.95 (min) complete with all accessories and including connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable, One GI medium grade 20/40mm dia bracket of total length 50 cm and fixed to wall with 2 Nos MS Clamp and fastener all as specified and directed by Engr-in-Charge. MAKE:- CG Cat Part No LSTS-20-CDL-M or techno commercially equivalent in Philips/Bajaj/Wipro

Supply and fix LED building security light 25 watt, 230 Volts complete with all accessories and including connecting up to ceiling rose with 0.5 sq.mm three core copper flexible conductor cable, One GI medium grade 20mm dia bracket of total length 50 cm and fixed to wall with 2 Nos MS clamps and fastener all as specified and as directed. MAKE:- Wipro/Philips/Havells

Material and labour for rewinding of ceiling fan 1400 mm/1200 mm sweep after dismantling complete motor assy, bearings, bushings, removal of burnt copper wire, cleaning of core, inserting proper insulating paper in slots, winding with and as per existing size / turn of super enamelled copper wire, heating, varnishing, replacement of un serviceable bearings / bushings, assemble of rotor and stator unit with capacitor, connecting wire, down rod, blades,one coat of painting complete with white enamel paint and testing complete including removal and refixing all as specified and as directed. NOTE :- (i) Contractor will collect fans from site and bring back to site after repairs, cost of transportation will be inclusive of quoted rate. (ii) Spares required for replacement such as bearing, bushing, capacitor shall be measured and paid separately as supply & fixing only. (iii) Cost of connector bock and capacitor holder shall be inclusive of the quoted rate.

Supply and fix ball bearing No 6201/6202/6203/6204 of SKF/Tata/NBC all as specified and as directed.

Supply and fix gun metal bush for bearing for ceiling fan as per existing pattern all as specified and as directed.

Supply and fix capacitor AC for 230 volts 50 Hz of capacity 1.8 Mfd all as specified and as directed.

Supply and fix energy saving ceiling fans, 230 Volts, 26 Watts, single pole, 1200 mm sweep, high speed of approved colour with remote control and two years warranty certificate from the manufacturers, with latest BEE five star rating and BLDC technology all as per Havells Model No :- Efficiencia Neo (BLDC 26W) or techno commercially equivalent models specified in PS complete with down rod and GI hook with welding work, wire connections from ceiling rose to ceiling fans, with complete accessories including writing of MES No with unit name on ceiling fans using approved stencil with synthetic enamal paint complete all as specified and as directed.

Supply and fix exhaust fan, metal body, light duty 300 mm sweep 230 volts, AC complete with frame and louvers including making of suitable hole in brick / stone wall for fixing of exhaust fan complete all as directed by Engineer-in-charge. MAKE:- Havells/Almonard/ Bajaj

Supply and fix exhaust fan, metal body, light duty 250 mm sweep 230 volts, AC complete with frame and louvers including making of suitable hole in brick / stone wall for fixing of exhaust fan complete all as directed by Engineer-in-charge. MAKE:- Havells/Almonard/ Bajaj

Material and labour for earthing complete with galvanised steel pipe electrode, 40 mm bore, medium grade, 3 mtr long buried directly and vertically in ground with top edge at ground level after making bore hole of size not less than 300 mm dia and 3.0 Mtr long using suitable mechanical drilling rig (for drilling near the specified bldg), connected with galvanised steel earthing lead of 4mm dia all as shown in Plate No-2, connected to the earthing test point, concrete pit in PCC 1:3:6 type C-2with RCC precast pit cover slab 400mmx400mmx80mm with handle for lifting made out of 8mm dia MS rod, funnel, wiremesh, 15 mm dia light grade GI tubing for protection of GI wire 4mm dia, charcoal and salt in alternate 150mm thick layers around GI earth pipe, including necessary returning filling in & removal all as specified or indicated in SSR Part-I, including testing to achieve earth resistance value as per IS specification on completion.

Supply and fix hot water heater storage type 5 star BEE rating having capacity 25 Ltrs with and including fusible plug, non return device, vacum release valve accessories with glass storage tank and 02 Nos of copper connection pipe hot & cold including testing and commissioning all as specified and directed by Engr-in-Charge.

Supply, laying and testing of UG cable, XLPE insulated, screened, PVC bedded galvanised steel strip or wire, armoured, electric power cable (heavy duty) with stranded aluminium conductor, 1100 volts grade of size 16 sq.mm 4 core including taking down the existing unserviceable cable complete all as specified and directed.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for laying of pipe and getting out in soft loose soil complete all as specified and directed.

Excavation in trenches n.exc 1.5m wide and n.exc. 1.5m in depth for laying of pipe and getting out in hard / dense soil complete all as specified and as directed.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for laying of pipe and getting out in soft disintegrated rock complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc. 25cm thick complete all as specified and as directed.

Removing of excavated material to a distance n.exc. 50m and depositing where directed at a level n.exc. 1.5m above the starting point complete all as specified and as directed.

Material and labour for brick protection with sub class 'B' bricks for UG cable complete all as specified and as directed.

Material and labour for road cutting upto 300mm deep and 200mm wide for crossing GI water pipe line through road including making good the disturbed surface by filling mass concrete complete all as specified and as directed.

Material and labour for plain cement concrete in foundations, filling and mass concrete of type D2 (1:4:8) using 40mm graded stone aggregate complete all as specified and as directed.

Material and labour galvanised iron tubing light grade 40mm bore, ISI marked, for cable protection complete all as specified and as directed.

Supply, lay and testing 25mm bore medium grade galvanised pipe with all fitting such as tee bends union elbow reducer etc., laid in trenches or fixed to walls or floors or ceilings all as specified and as directed.

Supply, lay and testing 20mm bore medium grade galvanized pipe with all fitting such as tee bends union elbow reducer etc., laid in trenches all as specified and as directed.

Supply and fix 25mm bore gun metal gate or globe valve, cast screwed down, high pressure with iron wheel handle, screwed both ends for iron pipe or unions complete all as specified and as directed.

Cutting existing 25 to 32mm bore steel tubing for alteration or additions (each cut measured) including earth work and accessories like dummy plug union socket etc in any condition all as directed by Engr-in-charge.

M/S JAYCONSTRUCTION CO

V.R.PRAJAPATI AND CO.

Vastushilpa Contrustion