Up-gradation of Bairagarh to meas road KM 0/0 to 6/0 under PMGSY Package No. HP-02-01

Amount

Scarifying the existing bituminous road by mechanical means up to 150 mm (one hundred fifty millimetre) depthand disposal of scarified material with in all leads and lifts as per MORD Technical Specification Section 300 and as per the directions of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality ,Malkana, toll tax or any other taxes imposed by the Government but excluding GST.

Excavation in hilly areas in all heights and depths and in all kinds of soil by manual/mechanical means including saturated soil comprising of ordinary soil, ordinary rock ,soft rock ,hard rock chiseling, wedging out rock (where blasting is prohibited) and their intermediate classification of soil complete including setting out true to the lines, grades, width, cutting and trimming of side slopes and levels as shown in the drawings and as directed by Engineer-in-Charge at site, according to the MORD technical specification section 300 and 1600 and sorting out useful materials and stacking the same within all leads and lifts in acquired road width and transportation of un-useful materials for filling in roadways camber ,embankments for grade improvements and disposal of all surplus materials to approved dumping sites through all modes of transportation including head load or animal transport or mechanical means alongwith its leveling fine dressing and carriage of machineries ,materials, tools, equipments and safety measures and other incidentals necessary to complete the work by mechanical means and labour if required.All useful materials such as stones, shingle aggregate and slates etcetera shall be sorted out and stacked in proper stack. Recovery of stones to the tune of 8908.38 cubic metre quantity @ Rs. 300/- only ( at the rate of rupees three hundred ) only per cubic metre shall be effected from the contractor’s running bills on pro-rata basis as per actual quantity executed. Any loss to the public/ private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be compensated by him in all cases.The rate is inclusive of octroi, royality ,Malkana, toll tax or any other taxes imposed by the Government but excluding GST.

Earth work in excavation for all type of road structure such as retaining walls, breast walls, culverts, drains and parapets etcetera in all type of classification of soil, comprising of ordinary soil, ordinary rock , hard rock chiseling / wedging out rocks (where blasting is prohibited) as per drawings and MORD technical specification section 300 and 1600 as per the directions of the Engineer-in-Charge including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal un-useful materials upto any lead and lift including dressing of sides bottom and back filling in trenches with excavated suitable / approved materials to the original surface in layers not exceeding 150mm (one hundred fifty millimetre) compacted thickness including shoring, strutting and pumping and bailing out water (surface and sub soil water) upto any depth and any quantum of water including cleaning of slush which may arise out during dewatering as per directions of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality ,Malkana, toll tax or any other taxes imposed by the Government but excluding GST.

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structure graded by motor grader and commpacted to meet requirement of Tables 300.1 and 300.2 as per MORD technical specification section 300 and 1600 or as directed by the Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is inclusive of octroi, royality ,Malkana, toll tax or any other taxes imposed by the Government but excluding GST.

Construction of granular sub base by providing well graded materials as per table 400.1 and spreading in uniform layers with tractor mount appropriate grading arrangements on prepared surface, mixing by mix in place method at OMC with tractor mount appropriate rotavator attachment and compacting with three wheel 80-100 (eighty -one hundred) kN static roller to achieve the desired density, as per MORD Technical Specifications Section 400 for grading-I material and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental.The rate is inclusive of octroi, royality ,Malkana, toll tax or any other taxes imposed by the Government but excluding GST.

Providing, laying, spreading by mechanically means and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100 (eighty to one hundred) KN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and MORD Technical Specification section 400 and as per direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality ,Malkana, toll tax or any other taxes imposed by the Government but excluding GST.

Providing and applying primer coat on te prepared surface of granular base including cleaning of road surface with Hydraulic brooms and spraying primer @ 0.85 Kg (Zero point eighty five kilogram) per aquare metre using one part of bitumen emulsion SS-I and two parts of water mixed with Nano techcology Tera prime emulsion @1% (one percent) of weight of emulsion by mechanical means as per MORD technical specifications Section 500 as per the entire stisfaction and direction of Engineer-inCharge inclluding carriage of materials with in all leads, lifts and other incidentals. The rate is including octroi, royality, malkana, toll tax or other taxes imposed by the Govt but excluding GST.

Providing and applying tack coat on the prepared granular surface treated with primer and cleaned with hydraulic broom and spraying tack coat @ 0.275 Kg ( Zero decimal two seven five kilogram) per Square metre using one part of bitumen tack emulsion RS-I and two parts of water mixed with Nano technology emulsion @ 1.4% (One decimal four percent) of weight of emulsion as per technical specification section 500, and as per direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, malkana toll tax , and other taxes imposed by the Government.but execuding GST.

Providing and laying 500mm (fifty ilimetre) thick Bituminous macadam with 40-60 (forty to sixty TPH hot mix plant producing an average out put of 50(fifty) tonnes per hour using crushed bindeer VG-10 (vilscosity Grade-ten) at the rate 3.5% (Three point five percent) as per design mix with nano technology (Zycitherm) at the rate of 0.1% (Zero decimal one percent) by wieght of nitumen transported to site within all leads laid over a previously prepated surface with paver finisher to the required grade, level and alignment and rolld to achieve the desired compactin as per MORD technical specification section 500 as per direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, malkana toll tax , and other taxes imposed by the Government.but execuding GST.

Providing and laying 30mm (thirty millimetres) compacted thickness bituminous concrete with minimum 100-20 (one hundred and one hundred twenty) TPH hot mix batch type plant with electronic control grading-II using crushed aggregate 13.2mm (thirteen decimal two millimetre) nominal size of specified grading premixed with bituminous binder VG-10 (Viscosity grade-ten) at the rate of 5.5% (five point five percent of mix weight as per design mix with nano technology (Zycotherm) at the ate 0.1% (sero decimal one percent) weight of bitumen, usng cement as filler with quantity not less than 2% (two percent) by weight of total aggregate or as per design mix transported to site, laid with sensor pater finisher hydraulic with sensor control to the required grade, level and alignment, over a previsiously prepared surface and rolling complete with smooth three wheel roller 8-10 (eight to ten) tonne capacity for initial break down rolling and vibratory roller 8-10 (eight to ten) tonne capacity or pneumatic tyre roller of 12-15 (twelve to fifteen) tonne with tyre pressure of atleast 0.56 MPa (zero decimal five six) for intermediate rolling and finish tolling with 6-8 (six to eight) tonne smooth wheeled tandom roller to achive the desire compacton as per MoRTH technical specification section 500 complete in all respect or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, malkana toll tax , and other taxes imposed by the Government.but execuding GST.

Providing, spreading by mechanical means and compacting stone aggregate size 53 mm to 22.4 mm (fifty three millimetre to twenty two point four millimetre) Grading-III, 75 mm (seventy five millimetre) compacted thickness to water bound Macadam specification including spreading in uniform thickness using template, hand packing, rolling with three wheel 80-100 (eighty - hundred) KN static roller in stages to proper grade and camber, including applying and brooming stone screening typr "B" of size 11.2 mm (eleven point two milimetre) nominal size at the rate of 0.18 (zero point one eight cubic metre) per ten square metre to fill up the interstices of course aggregate, watering and compating to the required density as per MORD technical specifications Section 400 including hauling of material within all leads, lifts and other incidentals. The rate including octori, royality, Malkana, toll tax or other taxes imposed by the Government excluding GST..

Construction of un - reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 (forty three) grade cement or any other type as per Clause 1501.2.2 M 30 (thirty) grade coarse and fine aggregates conforming to IS: 383 maximum size of coarse aggregate not exceeding 25 mm, (twenty five millimetre) mixed in a concrete mixer of not less than 0.2 cum (zero point two cubic metre) capacity and appropriate weigh batcher using approved design mix, laid in approved fixed side form work (steel channel, laying and fixing of 125 (one hundred twenty five) micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14 (fourteen) days using curing compound (where specified) and water finishing to lines and grade as per drawing and MORD Technical specification section 1500 and as per directions of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including the octroi, royalty, Malkana, toll tax or any other taxes imposed by the Government. but excluding GST.

Cutting of joints in slab (panelled slab) by joint cutting machine 1/4 to 1/3 depth of concrere slab as per MORD technical specification section 1900 as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental.The rate is inclusive of octroi, royality ,Malkana, toll tax or any other taxes imposed by the Government but excluding GST.

Providing and laying Mechanically mixed and vibrated concrete for plain /Cement concrete Grade M-10 (M-ten) nominal mix 1:3:6 ( one cement is to three sand is to six graded crushed stone aggregate 20 millimetre (twenty millimetre nominal size on ground or under water and curing complete for 14 (fourteen) days, in open foundations for all type of structures etcetera including pumping or bailing out water (surface and sub soil water) dewatering for all depths and any quantum of water including removal of slush which may arise at the time of laying concrete complete for all heights / depths including the cost of form work as per drawings and M.O.R.D. technical specification section 800, 900 and 1200 or as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals.The rate is inclusive of octroi, royality ,Malkana, toll tax or any other taxes imposed by the Government but excluding GST.

Providing and laying mechanically mixed and vibrated plain cement concrete 1:4:8 [ One cement is to four sand is to eight graded crushed stone aggregate 40mm (forty millimetre) nominal size] including pumping or bailing out water (surface and sub soil water) and removal of slush which may arise at the time of laying concrete including the cost of form work and curing complete in Retaining walls and Breast walls etcetera,as per drawings and MORD technical specification sections 800, 900, 1200 and 1600 and as per direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality ,Malkana, toll tax or any other taxes imposed by the Government but excluding GST.

Back filling of granular material behind abutments, return walls, wing walls and retaining walls etc. Complete as per drawings and MORD technical specification section 1200 and 1600 as per section 300 or as directed by the Engineer-in-Charge ,including carriage of materials within all leads, lifts and other incidental.The rate is inclusive of octroi, royality ,Malkana, toll tax or any other taxes imposed by the Government but excluding GST.

Providing 100mm cone (Hundred millimeter) diameter PVC(poly Vinyl chloride) pipe Weep holes in brick masonry/stone masonry, plain/reinforced concrete abutments, wing walls return walls and retaining /breast walls etc., extending through the full width of the structure with slope of 1 (V) : 20 (H) (one vertical is to twenty horizontal ) towards draining face complete as per drawings and MORD technical specifications section 700 and 1200 or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of octroi, royality ,Malkana, toll tax or any other taxes imposed by the Government but excluding GST.

Providing and laying of boulder apron laid in wire crates with 4mm(four millimetre) dia G.I. wire( Galvanized iron wire) confirming to IS: 280 and IS: 4826 in 100mmx100mm(one hundred millimetre into one hundred millimetre) mesh (woven diagonally) including 10% (ten percent) extra for laps and joints laid with stone boulders weighing not less than 40kg (forty kilogram) each as per drawing and MORD technical specification Section 1300 and as per directions of Engineer-in-charge including carriage of material within all leads ,lifts and other incidental. The rate is inclusive of octroi, royality ,Malkana, toll tax or any other taxes imposed by the Government but excluding GST.

Providing and laying mechanically mixed and vibrated concrete for plain cement concrete in sub-structure GradeM-15 (M-fifteen) nominal mix 1:2 1/2:5 (one cement: two and half sand: five graded crushed stone aggregate (40mm) forty millimetre nominal size) on gour or under water, incluing pumping of bailing out water/dewatering (sruface and sub-soil water) and removal of the slush which amy arise at the time of laying cocrete for all the height/depths and any quantum of water, in toe walls, parapets etctera including cost of form work and curing complete as per drawing and MORD technical specification section 800, 900 and 1200 and as pe the direction and the entire satisfaction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, malkana toll tax , and other taxes imposed by the Government.but execuding GST.

Randam rubble stone masonry with hard stone of approved quality in cement mortar 1:5 (one cement isto five sand) for substructure complete as per drawing and technical specification section 700 and 1200including hauling of material in all leads,lifts and other incidentals and as per the entire satisfaction and directions of Engineer-in-charge. The rate is inclusive of octroi, royality ,Malkana, toll tax or any other taxes imposed by the Government but excluding GST.

Providing and laying PCC M-20 architectural coping on the top of wing wall, return wall etc. complete as per drawing and MORD technical specification Section 600 and 700 including hauling of material with in all leads,lifts and other incidentals and as per the entire satisfaction and directions of Engineer-in-charge.The rate is inclusive of octroi, royality ,Malkana, toll tax or any other taxes imposed by the Government but excluding GST.

Providing and laying of hot applied thermoplastic road marking paint compound 2.5 mm (two point five millimetre) thick including reflectorising glass beeds @ 250 gram (two hundred fifty gram) per square metre area thickness of 2.50 mm (two point five millimetre) is exclusive of surface applied glass beeds by road marking machine as per IRC-35 in accordance with Ministry of Road Transport Specification section 800. The finish surface to be level uniform and free from streaks and holes including carriage of materials with in all leads, lifts and other incidentals or as per the direction and entire setisfaction of the Engineer -in-Charge. The rate is inclusive of octroi, royality ,Malkana, toll tax or any other taxes imposed by the Government but excluding GST.

Providing and erecting "W" metal beam crash barrier comprising of 3mm ( three millimetre) thick corrugated sheet metal beam rail 70 ( Seventy) centimetre above road/ground level fixed on ISMC series channel vertical post 150x75x5mm (One hundred fifty into seventy five into five millimetre) spaced 2 M (Two metre) center to center 1.80 m (one point eight zero metre) high and to 1.10 metre ( One point one zero metre) below ground/ road level. All steel parts and fitment to be galvanised by hot dip process. All fittings to conform to IS: 1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150x75x5mm (One hundred fifty into seventy five into five millimetre) and 330mm ( Three hundred thirty millimetre) long complete as per csection 800 of MORT &H ( Ministry of Road Transport & Highway) specification including all fitting required for errection at road site Including hauling of materials with in all leads, lifts and other incidental. The rate is inclusive of octroi, royality ,Malkana, toll tax or any other taxes imposed by the Government but excluding GST.

Providing and fixing of semi reflective cautionary, mandatory and informatory sign board 900 mm (nine hundred millmetre) equilateral triangular board as per IRC:67 made of 1.5 mm (one point five millimeter) thick MS Sheet duly stove enameled paint in white colour in front and gray colour on back with red reflective border of 65mm (sixty five millimeter) width and required letters and figures with reflective tape engineering grade of required shade and colour supported and welded on 47mmx47mm (Forty seven millimeter into forty seven millimeter) of 12 SWG sheet square tube firmly fixed to the ground by mean of properly designed foundations with M-15 (M-fifteen) grade cement concrete 450x450x600 mm, (four hundred fifty into four hundred fifty into six hundred millimeter) 600mm (six hundred millimeter) below ground level as per drawing and MORD technical specification section 1700 including painting angle iron post with primer and two coats of epoxy paint and as per direction of Engineer-In-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkana, Octroi, toll tax or any other taxes imposed by the Government but excluding GST.

Providing and fixing of semi reflective cautionary, mandatory and informatory sign board 600 mm (six hundred millmetre) circular board as per IRC:67 made of 1.5 mm (one point five millimeter) thick MS Sheet duly stove enameled paint in white colour in front and gray colour on back with red reflective border of 65mm (sixty five millimeter) width and required letters and figures with reflective tape engineering grade of required shade and colour supported and welded on 47mmx47mm (Forty seven millimeter into forty seven millimeter) of 12 SWG sheet square tube firmly fixed to the ground by mean of properly designed foundations with M-15 (M-fifteen) grade cement concrete 450x450x600 mm, (four hundred fifty into four hundred fifty into six hundred millimeter) 600mm (six hundred millimeter) below ground level as per drawing and MORD technical specification section 1700 including painting angle iron post with primer and two coats of epoxy paint and as per direction of Engineer-In-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkana, Octroi, toll tax or any other taxes imposed by the Government but excluding GST.

Providing and fixing of semi reflective cautionary, mandatory and informatory sign board 800 x 600 mm (eight hundred into six hundred millmetre) rectangular board as per IRC:67 made of 1.5 mm (one point five millimeter) thick MS Sheet duly stove enameled paint in white colour in front and gray colour on back with red reflective border of 65mm (sixty five millimeter) width and required letters and figures with reflective tape engineering grade of required shade and colour supported and welded on 47mmx47mm (Forty seven millimeter into forty seven millimeter) of 12 SWG sheet square tube firmly fixed to the ground by mean of properly designed foundations with M-15 (M-fifteen) grade cement concrete 450x450x600 mm, (four hundred fifty into four hundred fifty into six hundred millimeter) 600mm (six hundred millimeter) below ground level as per drawing and MORD technical specification section 1700 including painting angle iron post with primer and two coats of epoxy paint and as per direction of Engineer-In-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkana, Octroi, toll tax or any other taxes imposed by the Government but excluding GST.

Providing and fixing of semi reflective cautionary, mandatory and informatory sign board 900 mm (nine hundred millmetre) sides octagon board as per IRC:67 made of 1.5 mm (one point five millimeter) thick MS Sheet duly stove enameled paint in white colour in front and gray colour on back with red reflective border of 65mm (sixty five millimeter) width and required letters and figures with reflective tape engineering grade of required shade and colour supported and welded on 47mmx47mm (Forty seven millimeter into forty seven millimeter) of 12 SWG sheet square tube firmly fixed to the ground by mean of properly designed foundations with M-15 (M-fifteen) grade cement concrete 450x450x600 mm, (four hundred fifty into four hundred fifty into six hundred millimeter) 600mm (six hundred millimeter) below ground level as per drawing and MORD technical specification section 1700 including painting angle iron post with primer and two coats of epoxy paint and as per direction of Engineer-In-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkana, Octroi, toll tax or any other taxes imposed by the Government but excluding GST.

Providing and fixing of typical PMGSY logo and informatory sign board as per MORD instructions, specifications section 1700 and. Three MS Plates of 1.6 mm (one point six millimetre) thick, top and middle plate duly welded with MS flat iron 25 mm x 5 mm (twenty five millimetre into five millimetre) size on back on edges. The lower plate will be welded with MS angle iron frame of 25 mm x 25 mm x 5 mm (twenty five millimetre into twenty five millimetre into five miliimetre). The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 Nos. (Two Nos.) 75 mm x 75 mm (seventy five millimetre into seventy five millimetre) of 12 SWG (Twelve standard wire gauge) sheet tubes posts duly embedded in cement concrete M-15 (M-fifteen) grade nominal mix 1 : 2½ : 5 (one cement : two & half sand : five graded crushed/broken stone aggregate) 40 mm (forty millimetre) nominal size and curing complete of concrete blocks of 450 mm x 450 mm x 600 mm (four hundred fifty millimetres into four hundred fifty millimetres into six hundred millimetres), 600 mm (six hundred millimetres) below ground level. The Top must diamond plate will be wlded to middle plate by 47mmx47mm (forty seven into forty seven millimetre) of 12SWG steel tube . All MS wiil be stone enameled on both sides, lettering and printing arrows, borders etcetra will be painted with readymixed synthetic enamel paint of superior quality in required shade and colour. all section of framed post of epoxy paint and as per the directions of the Engineer-in-charge including carriage of materials within all leads, lifts and other incidental.The rate is inclusive of octroi, royality ,Malkana, toll tax or any other taxes imposed by the Government but excluding GST.

Providing and erecting Reinforced cement concrete mechanically mixed and vibrated M-15 grade kilometre stone of standard design as per IRC:8 (eight) fixing in position including painting and printing etcetera as per drawing and MORD technical specifications section 1700 5th( fifth) kilometre stone precast and as per the directions of the Engineer-in-charge carriage of materials within all leads, lifts and other incidental. The rate is inclusive of octroi, royality ,Malkana, toll tax or any other taxes imposed by the Government but excluding GST.

Providing and erecting Reinforced cement concrete mechanically mixed and vibrated M-15 ( M-fifteen) grade in ordinary kilometre stone of standard design as per IRC:8 (eight) fixing in position including painting and printing etcetera as per drawing and MORD technical specifications rural roads section 1700 or and as per the directions of the Engineer-in-charge including carriage of materials within all leads, lifts and other incidental.The rate is inclusive of octroi, royality ,Malkana, toll tax or any other taxes imposed by the Government but excluding GST.

Providing and erecting 200 metre(two hundred metre) stones made of reinforcement cement concrete M-15 ( M-fifteen) grade including painting and printing etcetra complete as per drawing and MORD technical specification section 1700 or and as per the directions of the Engineer-in-charge including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of octroi, royality ,Malkana, toll tax or any other taxes imposed by the Government but excluding GST.

Providing and installation of deleneator (road way indicator hazerd marker, object marker) 80-100 (eighty-one hundred) centimetre high above ground level, painted black and white in 15 cm (fifteen centemetre) wide strips filled with 80X100mm (eighty into hundred millimetre) rectangular or 75 mm (seventy five millimetre) dia circular reflectorised panels at the top burid or pressed in to the ground and conforming to IRC 79 and as per the drawing and MORD Technical Specification section 800 and as per direction of Engineer – in- Charge including carriage of materials within all leads, lifts and other incidential . The rate is inclusive of octroi, royality ,Malkana, toll tax or any other taxes imposed by the Government but excluding GST.

Brick masonry in cement mortar 1:4 (one cement isto Four sand) in Foundation complete excluding pointing and plastering as per drawing and MORD technical specificatio Section 600 and 1200 including hauling of material with in all leads,lifts and other incidentals and as per the entire satisfaction and directions of Engineer-in-charge. The rate is inclusive of octroi, royality ,Malkana, toll tax or any other taxes imposed by the Government but excluding GST.

Providing and laying ( to level or slope) 900 mm dia ( Nine hundred millimetre) diameter reinforced cement concrete heavy duty non pressure pipes IS class NP-3 for culverts one first class bedding of grannular material in single row including fixing collar with cement mortar 1:2 (one cement: two sand) but excluding the cost of excavation,protection works,back filling, bedding concrete or 1st class bedding and masonry work in head walls and parapets etcetra as per drawing and MORD technical specifications section 1101 or and as per the directions of the Engineer-in-charge including carriage of materials within all leads, lifts and other incidental.The rate is inclusive of octroi, royality ,Malkana, toll tax or any other taxes imposed by the Government but excluding GST.

Providing and laying mechanically mixed and vibrated reinforced cement concrete in super structure design mix having cement contents not less than 350 kg (tree hundred fifty kilograme) per cubic metre to obtain the minimum compressive strength of grade M-20 (Twenty) as per drawing and MORD technical specification section 800,900 and 1400 excluding the cost of reinforcement for reinforced concrete including the cost of form work and curing complete, including hauling of material with in all kinds of leads,lifts and other incidental or as per the entire satisfaction and directions of Engineer-in-charge. The rate is inclusive of octroi, royality , Malkana, toll tax or any other taxes imposed by the Government but excluding GST.

Providing and laying mechanically mixed and vibrated for plain cement concrete in sub-struture for all type of structure complete grade M-20(M-twenty) design mix having cement concrete not less than 330 kg (three hundred thirty kilograme) on ground or concrete and curing complete including pumping or bailing out water,dewatering removal of slush as required at site which may arise at the time of laying under water complete for all heights/depths including the cost of form work as per drawing and MORD technical specification section-800,900,& 1200 and as per the direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidential. The rate is inclusive of octroi, royality ,Malkana, toll tax or any other taxes imposed by the Government but excluding GST.

Supplying fitting and placing HYSD bar reinforcement (Fe-415) in superstructure complete as per drawing and MORD technical specifications section 1000 and 1400 including cutting ,bending ,binding and placing in position complete in all respect including cost of binding wire and as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidental. The rate is inclusive of octroi, royality ,Malkana, toll tax or any other taxes imposed by the Government but excluding GST.

Providing and laying mechanically mixed and vibrated reinforced cement concrete of design mix having cement contents not less than 430 kg (Four hundred thirty kilograme) per cubic metre to obtain the minimum compressive strength of grade M-30 ( M-thrity) and curing complete in wearing course including reinforcement complete as per drawing and MORD technical specification section 800, 900, 1000 and 1400 and as per direction of Engineer-in-charge,including carriage of materials within all leads, lifts and other incidental The rate is inclusive of octroi, royality ,Malkana, toll tax or any other taxes imposed by the Government but excluding GST.

Construction of RCC railing of M-25 (M-Twenty five) grade in cast-in-situ with 20mm (Twenty millimeters) nominal size aggregate true to line and grade, tolerance of vertical railing post not to exceed 1 in 500, (one in five hundred) centre to centre spacing between vertical post not to exceed 2000mm (Two thousand millimeters) leaving adequate space between vertical post for expansion including the cost of form work and reinforcement complete as per drawing and MORD technical specification section 800,900,1000 and 1200 or as per the entire satisfaction and direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including of Octroi, Royality, Malkana, Toll Tax or other Taxes imposed by the Government but excluding GST.

Providing and fixing drainage spouts complete with 100mm (one hundred millimetre) diametre galvanised mild steel/down pipe iron corrision resistant structural steel grating complete as per drawing and MORD technical specification section 1400 and as per direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals.The rate is inclusive of octroi, royality ,Malkana, toll tax or any other taxes imposed by the Government but excluding GST.

Dildar Ali

Kamal Kumar

V S Saini Contractor