Item rate contract for Construction and commissioning of all works with 2-years defect liability and 2-years maintenance period which will run concurrently from the last date of the completion of the project for the work of development of sites and services at Thylagere village, Kundana hobli, Devanahalli taluk, Bengaluru Rural district

Item rate contract for Construction and commissioning of all works with 2-years defect liability and 2-years maintenance period which will run concurrently from the last date of the completion of the project for the work of development of sites and services at Thylagere village, Kundana hobli, Devanahalli taluk, Bengaluru Rural district.

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...

Removal of stumps and roots including backfilling with suitable material to required compaction

Ref. to MoRT&H Spec.201. Girth from from 300 mm to 600 mm

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and t...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

KSRRB M300-16.1. Excavation for roadway in Hard rock by Mechanical means (blasting prohibited) including breaking roack, load in tippers and disposing with all lead and lifts trimming bottom and side ...

Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction

Boundry Pillar:- Reinforced cement concrete M15 grade

boundary pillars of standard design as per IRC:25, fixed in position including finishing and lettering but excluding

painting complete as per sp...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Painting on concrete surface

Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applyin...

Painting new letter and figures of any shade.

Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade “ MORTH Specification...

Providing and fixing RCC name board of size 1.35x0.60x0.04 m fixed in reinforced cement concrete poles of size 0.10x0.10x2.60m in cement concrete M 20 proportion using 20mm and down size graded metal ...

Planting of trees, by the road side (Avenue tree ) in 0.6m dia holes 1meter deep dug in the ground, mixing soil with decayed farmyard/ sludge manure, planting the saplings, backfilling the trench, wat...

Boundary Stone - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barric...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in position Reinforced cement

concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50...

Suppiying, fitting and placing TMT SE 550 / 550D Steel Reinforcement Including cost of all materials, machinery labour, cleaning, straghtening, cutting, bending, hooking, laping/welding joints, tying ...

Painting on concrete surface

Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applyin...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...

SIGNAGE BOARD - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barrica...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in position Reinforced cement

concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50...

Providing Brick work with common burnt clay modular bricks of classdesignation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, sca...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...

Suppiying. fixting and placing TMT SE 550 / 550D Steel Reinforcement Including cost of all materials, machinery labour, cleaning, straghtening, cutting, bending, hooking, laping/welding joints, tying ...

Painting on concrete surface - Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and apply...

Painting new letter and figures of any shade.

Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade “ MORTH Specification...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...

Road Works - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricadin...

Road Works - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricadin...

Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...

Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction - Construction of ...

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...

A.Plant mix method

Construction of Granular Sub-Base of required grading as

per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers w...

A.Plant mix method

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carri...

Prime Coat over WMM/WBM

Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0....

Bituminous Macadam Grading - II for traffic Less than20 MSA

Providing and laying Bituminous Macadam with 100 TPH

capacity hot mix plant batch type using crushed aggregates of specified grading premix...

Tack coat on Bituminous surface

Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned w...

Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 5% by weight ...

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface. Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectori...

Cable Duct Across the Road

Providing and laying of a reinforced cement concrete pipe

duct, 300 mm dia, across the road (new construction),

extending from drain to drain in cuts and toe of slope to t...

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal ...

Drain Works - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricadi...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

Suppiying, fixting and placing TMT SE 550 / 550D Steel Reinforcement Including cost of all materials, machinery labour, cleaning, straghtening, cutting, bending, hooking, laping/welding joints, tying ...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...

Culvert Works - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barrica...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

KSRRB M2200-9. Providing and laying of Filter media with granular materials /stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MORTH specifications to a thickness o...

Suppiying, fitting and placing TMT SE 550 / 550D Steel Reinforcement Including cost of all materials, machinery labour, cleaning, straghtening, cutting, bending, hooking, laping/welding joints, tying ...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...

Painting on concrete surface

Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applyin...

UGD Works - Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construc...

UGD Works - Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construc...

Earth work excavation for pipeline trenches in all kinds of by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shoring, s...

Earth work excavation for pipeline trenches in all kinds of by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shoring, s...

Earth work excavation for pipeline trenchesby mechanical means above 600 mm trench width as per drawing and technical specification, including setting out, construction of shoring, strutting, cost of ...

Earth work excavation for pipeline trenchesby mechanical means above 600 mm trench width as per drawing and technical specification, including setting out, construction of shoring, strutting, cost of ...

Providing bedding for the pipeline trenches in black cotton and rock reaches including watering and consolidation by punners etc. complete with all lead and lift with:

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ram ming after watering with a lead upto 50 m , and lift upto 1....

Supplying UPVC FOAM CORE pipes conforming to IS 16098 P-1 2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying tr...

Supplying UPVC FOAM CORE pipes conforming to IS 16098 P-1 2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying tr...

Supplying UPVC FOAM CORE pipes conforming to IS 16098 P-1 2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying tr...

Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying tru...

For supplying and fixing of specials like Elbows, Tees, Couplers, Saddle, reducers and Bend Etc.

Providing and constructing "WIRE CUT BRICK MACHINEHOLE

CHAMBERS" using Portland/Pozzolana cement, conical in shape at top,with CC 1:3:6 foundation using 40mm and down size graded metal of approved qua...

Providing and constructing "WIRE CUT BRICK MACHINEHOLE

CHAMBERS" using Portland/Pozzolana cement, conical in shape at top,with CC 1:3:6 foundation using 40mm and down size graded metal of approved qua...

Constructing Brick Masonry Circular Machinehole 1.2 m internal dia. , 1.2M depth & SFRC cover & frame

Constructing Brick Masonry Circular Machinehole 1.2 m internal dia. , 1.3M depth & SFRC cover & frame

Constructing Brick Masonry Circular Machinehole 1.2 m internal dia. , 1.4M depth & SFRC cover & frame

Constructing Brick Masonry Circular Machinehole 1.2 m internal dia. , 1.5M depth & SFRC cover & frame

Constructing Brick Masonry Circular Machinehole 1.2 m internal dia. , 1.6M depth & SFRC cover & frame

Constructing Brick Masonry Circular Machinehole 1.2 m internal dia. , 1.7M depth & SFRC cover & frame

Constructing Brick Masonry Circular Machinehole 1.2 m internal dia. , 1.8M depth & SFRC cover & frame

Constructing Brick Masonry Circular Machinehole 1.2 m internal dia. , 1.9M depth & SFRC cover & frame

Constructing Brick Masonry Circular Machinehole 1.2 m internal dia. , 2M depth & SFRC cover & frame

Constructing Brick Masonry Circular Machinehole 1.2 m internal dia. , 3M depth & SFRC cover & frame

INSPECTION CHAMBER - Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty...

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shor...

Water Supply : Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, const...

Earth work excavation for pipeline trenches in all kinds of by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shoring, s...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ram ming after watering with a lead upto 50 m , and lift upto 1....

Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of various dia.with body, bonnet of ductile iron (DI) conforming to IS-1865 and of grade GGG 40/50, shaft of stainless steel, wedge f...

Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of various dia.with body, bonnet of ductile iron (DI) conforming to IS-1865 and of grade GGG 40/50, shaft of stainless steel, wedge f...

Supply and fixing of single chamber triple function tamper proof (Both the orifces to be housed in the single chamber) Air valves with Body and cover in Ductile cast iron of grade GGG 40/50. All inter...

Supply and fixing of single chamber triple function tamper proof (Both the orifces to be housed in the single chamber) Air valves with Body and cover in Ductile cast iron of grade GGG 40/50. All inter...

Valve chamber - Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455...

Providing house connection with excavation in all types of soils cutting with machine cutter without damaging the other utilities and supplying and laying of MDPE pipe (PE80) -PN 12.5 manufactured in ...

For connection pipe length beyond 2.0 mtrs for every 1 mtr. or part thereof for Housing Connection

BOREWELL - Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical

sounding by adopt...

Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG & above 900 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, col...

Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG & above 900 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, col...

Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG & above 900 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, col...

Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG & above 900 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, col...

Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG & above 900 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, col...

Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG & above 900 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, col...

Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG & above 900 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, col...

Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...

Providing and laying at site of work MS casing caps as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum)...

Raising Main from Bore well to main Connection - Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specificat...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...

Providing,supplying to work site,fixing of Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as p...

Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

Supply and fixing of DI double flanged wafer type (Concentric) / double eccentrically disc, butterfly valves confoming to DIN 335 / IS 13095 with renewable soft seal on the disc and body seat face of ...

Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments - Size 50 mm

Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments - Size 63 mm

PART-B (ELC. ITEMS) Main Panel - Fabricating supplying and mounting MS box made out 16 SWG suitable for floor/wall mounting,fully weather proof with provision for better heat dissipation, provided wit...

Supplying and Fixing of Shunt trip suitable for MCCB. CBCT

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve,indicator ON/OFF,energy cross-3 with short circuit breaking capa...

Supplying and fixing angle iron frame work fabricated out of M.S angle iron… and M.S flat …. with bolts ,Washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 4...

Supplying and fixing angle iron frame work fabricated out of M.S angle iron… and M.S flat …. with bolts ,Washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 5...

Supplying fully automatic star -dealt starter unit push button type with suitable wires 3 contactors one adjustable thermal timer mounted on a common base plate held in steel enclosure for use on 400/...

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440v A.C.50 Hz 12/24v D.C.

Supplying,fixing and wiring 3 Phase Digital Ammeter/Voltmeter

Supplying,fixing and wiring rotary selector switch suitable for voltmeter/ammeter(ammeter only)

Supplying and fixing HRC fuse units base on existing switch / panel board - to 63 Amps

Supplying,fixing and wiring heavy duty low voltage capacitors conforming to IS 2834.3 phase,400/440 volts grade,for power factor improvement of rotating machinery.like induction motor.Cost per KVAR.

Fixing a shunt capacitor of …..KVAR capacity with necessary clamps , bolts , and nuts on existing wooden or metal board including banking of more than one capacitor. - UP to 5 KVAR

Supplying …..amps rated 3phase with netural bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve,mounted on phenolic/FRP/DMC insulator which...

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes - 10 sqmm

Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1KV class (metal only) - 25 mm dia

Supplying and drawing 3 coreflat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to IS:8130-1984 and virin...

Park Fenching - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barrica...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in position Reinforced cement

concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50...

Providing Size Stone masonry with hard stone in foundation &

plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 15 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, ker...

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...

Arch Way - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading,...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevan...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Suppiying. fiting and placing TMT FE 550 / 550D Steel Reinforcement Including cost of all materials, machinery labour, cleaning, straghtening, cutting, bending, hooking, laping/welding joints, tying w...

Suppiying. fiting and placing TMT FE 550 / 550D Steel Reinforcement Including cost of all materials, machinery labour, cleaning, straghtening, cutting, bending, hooking, laping/welding joints, tying w...

Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, incl...

Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an e...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Printing new letter and figures of any shade with synthetic

enamel paint black or any other approved colour to give an

OHT - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caut...

OHT - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caut...

OHT - Earth work excavation for pipeline trenches by mechanical means above 600 mm trench width as per drawing and technical specification, including setting out, construction of shoring, strutting, c...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and Filling in foundation with granite / trap broken metal 100mm and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour with...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Suppiying, fitting and placing TMT SE 550 / 550D Steel Reinforcement Including cost of all materials, machinery labour, cleaning, straghtening, cutting, bending, hooking, laping/welding joints, tying ...

Suppiying, fitting and placing TMT SE 550 / 550D Steel Reinforcement Including cost of all materials, machinery labour, cleaning, straghtening, cutting, bending, hooking, laping/welding joints, tying ...

Suppiying, fitting and placing TMT SE 550 / 550D Steel Reinforcement Including cost of all materials, machinery labour, cleaning, straghtening, cutting, bending, hooking, laping/welding joints, tying ...

Suppiying, fitting and placing TMT SE 550 / 550D Steel Reinforcement Including cost of all materials, machinery labour, cleaning, straghtening, cutting, bending, hooking, laping/welding joints, tying ...

Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...

Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...

Providing and fixing RCC final and ventilators as per approved design and specifications with form works and protected with wire mesh. The plinth to be of RCC circular pillars and canopy with an ornam...

Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. includi...

Providing and fixing gauge with iron sheet or enamelled guage plate of 3mm to 4mm thick, 0.23 M width with copper floats indicators and flexible nylone wires, painting figures with approved enamel pai...

Providing and fixing gauge with iron sheet or enamelled guage plate of 3mm to 4mm thick, 0.23 M width with copper floats indicators and flexible nylone wires, painting figures with approved enamel pai...

Providing and fixing gauge with iron sheet or enamelled guage plate of 3mm to 4mm thick, 0.23 M width with copper floats indicators and flexible nylone wires, painting figures with approved enamel pai...

Supplying and fixing DI/CI puddle flanges conforming to IS 7181-1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc....

Supplying, Laying and Jointing Cast Iron (CI) double flanged pipes true to line / hoisting of DIflanged pipe in position and aligning to correct plumb, including cost of jointing materials, conveying ...

Supplying, of DI flanged pipe conforming to IS 8329 : 2000 with latest amendments with Cement Mortar Lining (CML) with Portland Slag Cement as per IS 455:1989 and Metallic Zinc Coating as per annexure...

Supplying and fixing lightening arrestor with aluminium strip 25mm x 3mm size including finial and grounding, aluminium strip to be embeded in one of the columns in and independent GI conduit of 40mm ...

Providing two coats of water proof cement painting with approved colour and shade over one coat of primer including scrapping the surface with wire brushes etc. before removal of scaffolding for new R...

Supplying and fixing 40mm dia. GI pipe medium duty pipes hand railing 3 rows fixed to RCC 1:2:4 vibrated post of 150x150mm at bottom and 100x150mm at top, placed at 2 Mtrs. intervals for a height of 7...

Providing plastering in CM 1:3 proportion for RCC over head tanks, including smooth finishing, minimum 2% of approved quality water proofing compound, curing, scaffolding and giving satisfactory water...

Providing plastering in CM 1:3 proportion for RCC over head tanks, including smooth finishing, minimum 2% of approved quality water proofing compound, curing, scaffolding and giving satisfactory water...

GLSR - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, cau...

GLSR - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, cau...

GLSR - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, cau...

Earth work excavation for pipeline trenchesby mechanical means above 600 mm trench width as per drawing and technical specification, including setting out, construction of shoring, strutting, cost of ...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

SRB 2.8 : Providing and Filling in foundation with granite / trap broken metal 100mm and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and l...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing plastering in cement mortar 1:3 proportion with minimum 2% of approved quality water proof compound, including scaffolding, racking out joints 25mm deep, smooth finishing, curing etc. with a...

Suppiying, fitting and placing TMT SE 550 / 550D Steel Reinforcement Including cost of all materials, machinery labour, cleaning, straghtening, cutting, bending, hooking, laping/welding joints, tying ...

Suppiying, fitting and placing TMT SE 550 / 550D Steel Reinforcement Including cost of all materials, machinery labour, cleaning, straghtening, cutting, bending, hooking, laping/welding joints, tying ...

Suppiying, fitting and placing TMT SE 550 / 550D Steel Reinforcement Including cost of all materials, machinery labour, cleaning, straghtening, cutting, bending, hooking, laping/welding joints, tying ...

Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to RCC structures like floor and walls of reservoirs, sewe, effluent and water treatment plants,...

Distempering with dry distemper of approved brand and manufacture (two coats) of required shade on new work, over and including water thinnable priming coat to give an even shade after thoroughly broo...

Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...

Providing and fixing PVC water stopper of suitable type of 230 mm width and 5 mm thickness for construction joints as per detailed technical specifications and as directed by Engineer-in-charge

Providing, fixing, applying of contraction joint with suitable type PVC water stopper of 230 mm width and 5 mm thick sealed with 12 mm x 25 mm gun grade polysulphide elastomeric joint sealant of FOSRO...

Providing & fixing of Aluminium Ventilators of frame size 40 x 18 mm of 1.3 mm thick, 0.933 Kg/ M all aluminium sections including cutting to required length, joints mitred subdiving the frame tenonne...

RCC Nala Drain - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barric...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

Suppiying, fitting and placing TMT SE 550 / 550D Steel Reinforcement Including cost of all materials, machinery labour, cleaning, straghtening, cutting, bending, hooking, laping/welding joints, tying ...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...

STP - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caut...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

SRB 2.8 : Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and ...

Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in all types of Structures other than Road works, using coarse aggre...

Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in all types of Structures other than Road works, using coarse aggre...

Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in all types of Structures other than Road works, using coarse aggre...

Providing and laying in position Reinforced cement concrete M30 Design Mix for top cover flat slab. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Code...

Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to RCC structures like floor and walls of reservoirs, sewe, effluent and water treatment plants,...

Distempering with dry distemper of approved brand and manufacture (two coats) of required shade on new work, over and including water thinnable priming coat to give an even shade after thoroughly broo...

Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...

Providing and fixing PVC water stopper of suitable type of 230 mm width and 5 mm thickness for construction joints as per detailed technical specifications and as directed by Engineer-in-charge

Providing, fixing, applying of contraction joint with suitable type PVC water stopper of 230 mm width and 5 mm thick sealed with 12 mm x 25 mm gun grade polysulphide elastomeric joint sealant of FOSRO...

Providing & fixing of Aluminium Ventilators of frame size 40 x 18 mm of 1.3 mm thick, 0.933 Kg/ M all aluminium sections including cutting to required length, joints mitred subdiving the frame tenonne...

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Supplying, Fitting and Placing TMT Fe 500 & above Reinforcement in Foundation / Substructure / Superstructure complete as per Drawing and Technical Specifications.

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...

Providing and laying 100mm thick factory made precast M - 40 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 For Commercial TraFfic Axle load repetitions more than 10MSA upto 20MSA ...

Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 15 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, ker...

Providing 2 pole structure at tappping point near the Existing sub station - RCC DP structure using 9mtr RCC pole with 145 Kg WL

11KV, 3c x 400 Sqmm XLPE, UG Cable (Round Armoured ) 2 Run

Cable termnation Kit Outdoor HS type suitable for 3C x 400 Sqmm Cable

Cable termnation Kit indoor HS type suitable for 3C x 400 Sqmm Cable

Cable Covering tiles 250 X 125 X 40mm

Artificial/Manufacture sand

RCC hume pipes 2000 mm Long 150mm Dia

Collars for RCC hume pipe

GI pipe 150mm Dia for cable raisng

Route and joint indicating stones

Guy set complete with No 15 starin insulators and concreting materials

11 kv 400 Amps Double break GOS

H frame for mounting Gos

Lightning arrestors metal oxide 9 KVA 5KN polymeric type with ground connector (set 3 No's)

Earthing mateials-pipe type for Jumps

Coyote ACSR conductor for jumps

GI strips 25x6 mm with fixing materials

Caution - Danger board

Anticlimbing Devices (12mtr GI Barbed wire)

Sprial earth electrode

Aluminium end terminals (lugs) 400 Sqmm

Labour Charges: Erection of 9mtr long RCC pole DP structure

Laying of 3C X 400 Sqmm UG cable in existing trench

Making cable termination Kit Outdoor/Indoor

Covering the cable with tiles

Refilling and consolidation

cable trench excavation : 1000X0.6X1M=600 Cmtr in ordinary soil

Spreading sand and forming with sand round the cable

Laying of RCC hum pipes

Laying of GI pipe

Laying of Route and joint indicating stones

Fixing of guyset with No-15 strain insulators

Eretion of 11KV 400A D B Gos

Eretion of 'H' frame

Fixing of lightning arrestors

Fixing of Earthings

Fixing of caution-Danger boards

Fixing of Anticlimbing devices

Fixing of Sprial earth electrodes

Guy cocreting with boulders, mud and sand

Painting of 9mtr long RCC Poles of DP structure

Concreting of 9mtr RCC poles:

a) Base concreting with CC 1:4:8, 500X650X150mm

b) Pole concreting with CC 1:2:4 and as per actuals

c) Pole coping with CC 1:2:4 and as per actuals

Providing Compat RMU 11KV class SF6/VcB type (1 in comer +1 Breaker + 1 Out going) - RMU 3 way (20D + I VL) one in comer +one breaker + one Out going) 350 MVA, 630 Amps of BESCOM approved make.

Bed Concreting with CC 1:2:4

Foundation with reinforcement CC 1:2:4

Providing reinforcement

Providing plinth with CC 1:2:4

Construction of stone mesonary

Supplying frame of M S channel 100X50mm and M S angle 40 x 40 X 5mm welding etc., complete

Rod type earthing with 40mm dia 3mtr long MS rod

Lettering the RMU with enamel paint and also writing single line diagram of each panel, caution board, dnger board etc., including cost of paint, brush etc

Labour Charge :Earth excavation for RMU foundation depositing of earth on bankup ti lead of 50mtr and with a lift upto 1.5mtr

labour charges forfixing oundation frame of MS channel 100X50mm and MS angle 40x40x5mm welding, fixing in concrete, aligning the RMU on foundation bed, assembling of units, connecting busbars from pan...

Laying of 11KV, 3X400 Sqmm XLPE HT UG cable from DP structure to compact RMU at Layout - 11 KV 3x400 Sqmm XLPE UG cable of KEI/Havells make

Straight through Jointing Kit H S type suitable from 3x400 Sqmm cable

Cable termination Kit outdoor HS type suitable from 3x400 Sqmm cable

Cable termination Kit indoor HS type suitable from 3x400 Sqmm cable

Cable covering tiles 250x125x40mm

Arificial/manufacture sand

RCC hume pipe, 2000 mm long, 150mm dia

Collors for RCC hume pipe

GI pipe, 150mm dia for cable raising

Route and Jointindicating stones

Alluminium end terminals (lugs) 3x400 Sqmm

Labour Charges: Cable trench excavation, 1000x0.6x1mt=600

Laying of cable in trench

Refilling and consolidation

Making of straight through Jointing Kit

Making Cable termination Kit

Covering the cable with tiles

Spreading sand and forming with sand round the cable

Laying of RCC hume pipe

Laying of GI pipe

Laying of route and joint indicating stones

Erection of 3 phase, 11KV/433 Volts 100KVA Transformer mounting structure using 11 mtr spun pole with 3 Gos system

(Excluding tranformer) - Spun pole 11 Mtr long

Single pole transformer structure kit with 3 H frames without transformer seating and seating angle support cross arms for 100 KVA (UG Cable) MS

HT angle top supports with bolts, nuts and washers

11 KV 5 KN polymeric pin insulators (24mm dia FRP rod)

Rabbit ACSR conductors for jump

Alkaline tube 19mm Dia and in coils of 30 mtr

Guywire 7/10 SWG

GI pipe 100 mm dia

PVC pipe, 150mm dia

PVC bend 150 mm dia

PVC pipe 25mm dia

11 KV solid core type HG fuse unit (set/3 Nos)

11 KV 200 amps single break GOS

Earthing materials pipe type for grounding (single electrode with accessaries)

11 KV lightning arrestors, metaloxide 9 Kv, 5KN polymeric type with ground connectors (set/3 No)

Horizantal cross arms

Caution / Danger board

Anticlimbing devices (12m GI barned wire)

PVC insulation tape rolls of 10 mtr

Labour Charges: Erection of spun pole 11 mtr long

Erection of single pole tranformer structure

Fixing of HT single top supports

Concreting Materials for 11 Mtr spun pole

a) Base concreting 1:4:8 1000x1000x2500 mm

b) Pole concreting 1:2:4 1000x1000x2500 mm

c) Pole Coping 1:2:4 and as per actuals

Fixing of 11 KV solid core type HG fus unit

Fixing of 11 KV 200 Amps single break GOS

Fixing of earthings

Fixing of 11 KV lightning arrestors

Fixing of caution / danger board

Fixing of anti climbing devices

Construction of platform (1.5x1.5x1.2mt) in size stone mesonary including cost of material and labour

Providing chain link fencing 50mm size of 8 gauge properly stretched between rectangular pole and fixes with suitable bolt and nuts including cost of materials and labour

Laying of 11KV, 3X240 Sqmm XLPE HT UG cable from RMU to tramsformer structure - 11 KV 3x240 Sqmm XLPE UG cable of Havells / KEI

Straight through Jointing Kit H S type suitable from 3x240 Sqmm cable

Cable termination Kit outdoor HS type suitable from 3x240 Sqmm cable

Cable termination Kit indoor HS type suitable from 3x240 Sqmm cable

Cable covering tiles 250x125x40mm

Arificial/manufacture sand

RCC hume pipe, 2000 mm long, 150mm dia

Collors for RCC hume pipe

GI pipe, 150mm dia for cable raising

Route and Jointindicating stones

Alluminium end terminals (lugs) 3x240 Sqmm

Labour Charges: Cable trench excavation, 1000x0.6x1mt=600 in an ordinary soil

Laying of cable in existing trench

Refilling and consolidation

Making of straight through Jointing Kit

Making Cable termination

Covering the cable with tiles

Spreading sand and forming with sand round the cable

Laying of RCC hume pipe

Laying of GI pipe

Laying of route and joint indicating stones

Laying of LT UG Cable 3.5 x 120 Sqmm from transformer distribution Box to feeder pillar Box - LT UG cable1.1 KV class 3.5 C x 120 sqmm

Straight through Jointing Kit suitable for 1.1 KV class 3x120 Sqmm UG cable

Cable termination Kit o(Pole head) suitable from 3x120 Sqmm cable

Cable covering tiles 250x125x40mm

Arificial/manufacture sand

RCC hume pipe, 2000 mm long, 150mm dia

Collors for RCC hume pipe

GI pipe, 150mm dia for cable raising

Route and Jointindicating stones

Alluminium end terminals (lugs) 3x120 Sqmm cable

LT feeder pillar box with porceline rewirable cutouts and 1 No of 630 Amps load break switch with copper busbars asper IS 13947 part 1 and 2: 12 ways

Labour Charges:Cable trench excavation, 1000x0.6x1mt=600 in an ordinary soil

Laying of cable in existing trench 3.5 x 120 Sqmm

Refilling the cable trench with available earth from trench excavation including watering and consolidation

Making of straight through Jointing Kit

Making Cable termination

Covering the cable with tiles

Spreading sand and forming with sand round the cable

Laying of RCC hume pipe

Laying of GI pipe

Laying of route and joint indicating stones

Erection of LT feeder pillar Box including civil works like soil excavtion and concreting etc., complete : 12 way

Fabrication, supplying and erecting swaged tubular pole height 9mts having three sections and providing two coats of red oxide paint and thinshed with two coats of enameled paint of approved qualities...

Supplying and fixing telescopic MS bracket fabricated by using 0.5m length 4'' dia telescopic MS pipe with 2'' dia 1.5 mtrs long MS bracket and are welded with suitable angle using 6mm thick MS sheet ...

Supplying of LED street light lumenairs with prssure die cast alluminium honsing body for optimal thermal dissipation lamp compartment of antiglare clear diffuser with injection moulded polycorbonate ...

1.1 KV xLPE or heat resistant PVC insultated PVC exutrusted inner sheath armoured LT UG cable 4 core x 16 Sqmm

Providing and laying in position 100 mm dia stone ware pipe in existing trench

Supplying and fixing of class 'A'(Mediam duty) Gl pipe of wall thick not less than 3.25mm on pole / wall /Drain crossing with necessary clamping arrangements for UG cable of 1.1kv class 40mm

Supply and fixing heavy duty cable glands suitable for UG cable of 1.1kv class(Metal only) 32mm dia

Supplying and fixing LT cast iron pot head suitable for UG cable 1.1 KV class UG cable filled with necessary bitumen/insulating compound complete with terminal clamps, bolt, nuts and washers etc., 16 ...

Supplying and making straight through cable joint with epoxy/resign including ferrules and other jointing meterials for pvc insulated and pvc sheated steel tape wire are used aluminium condetor 4core ...

Supply and wrapping the conductor with camabrick tape roll

Supplying tinned alluminium lugs and crimping and wiring to terminal point for wires of 16 Sqmm

Wiring for street lights circuit using one of FRLS PVC insulated 1100 V grade multistrand copper wire single core 4 Sqmm

Sheet metral/ Deep drawn street light metering box with automatic control switch, contractors with single phase 5-30 Amps meter 15 A CT including wiring

PVC pipe 40mm dia

PVC insulated wire 25 Sqmm single core Multistranded

Labour Charges: Digging of trench of 0.6 m Deep x 0.5 mtr wide refilling the trenh to the required ground level and consolidating etc., complete in an ordinary soil

Labour charges for laying of 1.1 KV Class UG cable in existing trench

Fixing of sreet light metering Box with all accessaries like automatic contril/switch and single phase energy meter and with earth electrode fo grounding metering box

Providing Compact RMU 11kv Class SF6/VCB Type (10D) - RMU 10D 350 MVA, 630 Amps

Bed Concreting with CC 1:2:4

Foundation with reinforcement CC 1:2:4

Providing reinforcement

Providing plinth with CC 1:2:4

Construction of stone mesonary

Supplying frame of M S channel 100X50mm and M S angle 40 x 40 X 5mm welding etc., complete

Rod type earthing with 40mm dia 3mtr long MS rod

Lettering the RMU with enamel paint and also writing single line diagram of each panel, caution board, dnger board etc., including cost of paint, brush etc

Labour Charge :Earth excavation for RMU foundation depositing of earth on bankup ti lead of 50mtr and with a lift upto 1.5mtr

labour charges forfixing oundation frame of MS channel 100X50mm and MS angle 40x40x5mm welding, fixing in concrete, aligning the RMU on foundation bed, assembling of units, connecting busbars from pan...

Providing of Polygon high mast Lumenairs with all accessaris at road circles or junction point in side layout - Fabrication, supplying, erection, testing and commissioning of 20 mts long polygon high ...

Design and casting of suitable foundation for high mast, condensing the safe soil bearing capacity at the site at least 10 tonnes per sqmt at the dept of 2mts. The work shall be carried out as per spe...

Providing cement concrete to high mast with material and labour including neccesary curing etc., cmplete

Supply and fixing of foundation bolts manufactured out of special steel along with bolts ,nuts ,washers, and another plates,templates etc., (approved rate)

Supplying, installation, testing and commissioning of 1000x12000x400 mm out door type panel board fabricated out of 18SWG MS steel with 50x50x6mm angle TPN MCB pilot lampset, selector switch 23 No's, ...

Supplying of LED street light lumenairs with prssure die cast alluminium honsing body for optimal thermal dissipation lamp compartment comprising of antiglare clear diffuser with injection moulded po...

Fixing of LED flood light fitting over the existing pole including clamps, bolt nuts washers and wiring using suitable capacity wires

Supplying of 1.1 KV XLPE of heat resistant PVC insulated, PVC exntruted inner seath anmoured LY UG cable as per TS-1554 3.5 core x 25 Sqmm

Laying of LT UG cable in existing trench

Digging of trench of 0.6 m Deep x 0.5 mtr wide refilling the trenh to the required ground level and consolidating etc., complete in an ordinary soil

Supplying and fixing of class 'A'(Mediam duty) Gl pipe of wall thickness not less than 3.25mm on pole / wall /Drain crossing with necessary clamping arrangements for UG cable of 1.1kv class 50mm

Supplying and fixing LT cast iron pot head suitable for UG cable 1.1 KV class UG cable filled with necessary bitumen/insulating compound complete with terminal clamps, bolt, nuts and washers etc., 25 ...

Supplying tinned Alluminium lugs and crimping and wiring to terminal points for wire of 3.5C x 25 sqmm UG cable

supplying and fixing heavy duty cable glands suitable for UG cables of 1.1 KV class (metal only ) 45 mm dia

Earthing supply fixing and wiring earth electrodes for grounding High mast out door panel using 40mm dia, 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reduser fixed on t...

Suppling and running of GI strips for grounding connections, using necessary fixing materials as required 25x6mm GI strips

Providing Solar lights in park with 5.5 mtr MS Pole - Supplying, testing and commissioning at site outdoor type SOLAR street light with the following specifications:

A stand alone solar photovoltaic ...

11KV, 25 KA, 500MVA 1250 Amps MCVCB Feeder panel with SCADA Compitable 110 DC

Remote control Announciator panel I/C +4F

1.9 core 205 Sqmm copper cotrol cables

HT UG Cable, 11 Kv class XLDE 3 Cr 400 Sqmm including coiling etc

Indoor termination Kit 11 KV class suitable for 3 x 400 Sqmm X LPE HT UG cable -heat shrinkable type

outdoor termination Kit 11 KV class suitable for 3 x 400 Sqmm X LPE HT UG cable -heat shrinkable type

RCC 11 KW DP Structure using 9 mtr RCC pole W/L 145 Kg

400 amps Double break GOS

COYOTE conductor

Copper terminals 185 sqmm heavy long barrel

Guyset with No 15 strain insulator

H Frame mounting

Loading of 11KV Panel, power and control cable etc

Unloadng of 11 Kv panel, power and control Cable Etc

Erection alignment and fixing to the foundation, indoor/outdoor 11kv switch gear panel/ Unit including movement from the unload point of erection

Wiring and assisting in testing and commissioning panel

Testing and commissioning, identification of wires ferroing crimping and termination of wires for annumaciation etc testing of elays, CTS, DTC an breaker for operation for 11 kv panel

Erection of annuciation panel

Grounding of equipment by providing cast iron pipe of 100 mm dia ID 13 mm thickness, 2075 mtrs long with 2 pints clamp out of GI plates 50 x 6 mm counting welded alround the pipe using cast welding El...

Grounding of equipment with 50 x 6mm GI heat and connecting equipments to the earth mat/ground pit. Each point of eathing with all formation work like bending by welding (including of all T & P and co...

Lathing of control panel

Formation of pot head for 3 x 400 sqmm 11 kv class x LPE UG Cable

Erection of DP structure

Fixing of GOS includingwiring

Earth excavation in ordinary soil and removing the excavated earth with lead and lift dispoed earth, Leveled, excavated surface loaded and neatly Dressed etc, copmplete as per specification

Laying of power cable in the trench

Spreading and forming with sand alround the cable

Conveying the cable with tiles

Fixing of Guyset with 2 break insulator making use of 7/3.15 mm (7/10 SWG galvonising steel wire from break and anchoring arrangments as per approved drawing (including excavation of pit)

Providing concrete to Grey sets with material and labour including necessary curving the complete (cost does not includes excavation)

Erection of "H" at amc for mounting GOS

Miscellaneous Labour like letter writing of panel vermic proof drilling, cutting, grinding, welding rubber mate

Switch gear foundation, Shelter to accordinate 11 Kv MCVCB Panel and illumination etc.

L Providing tubular pole street lights on Median road in side layout - Fabricating supplying and erecting swaged tubular pole of height 9mts having three sections and providing two coats of red oxide ...

Supplying and fixing telescopic M.S bracket fabricated by using 0.5mts 4" dia telescopic MS pipe with 2"dia 1.5m long bracket and are welded with suitable angle using 6mm thick MS sheet grip bolts and...

Supplying of LED street light lumenairs with prssure die cast alluminium honsing body for optimal thermal dissipation lamp compartment comprising of antiglare clear diffuser with injection moulded pol...

supplying of 1.1kv LT UG cable XLPE or heat resistance PVC insulated PVC extruded inner sheeth armoured UG LT cable as per IS - 1564 4Cx16sqmm

Providing and laying inposion 100 mm dia stone ware pipe in existing trench.

Supply and fixing heavy duty cable glands suitable for UG cable of 1.1kv class(Metal only) 32mm dia

Supplying and fixing of class 'A'(Mediam duty) Gl pipe of wall thick not less than 3.25mm on pole / wall /Drain crossing with necessary clamping arrangements for UG cable of 1.1kv class 40mm

Supplying and fixing LT cast iron pot head suitable for UG cable 1.1 KV class UG cable filled with necessary bitumen/insulating compound complete with terminal clamps, bolt, nuts and washers etc., 16 ...

Supplying and making straight through cable joint with epoxy/resign including ferrules and other jointing meterials for pvc insulated and pvc sheated steel tape wire are used aluminium condetor 4core ...

Supply and wrapping the conductor with camabrick tape roll

Supplying tinned alluminium lugs and crimping and wiring to terminal point for wires of 16 Sqmm

Wiring for street lights circuit using one of FRLS PVC insulated 1100 V grade multistrand copper wire single core

Sheet metral/ Deep drawn street light metering box with automatic control switch, contractors with single phase 5-30 Amps meter 15 A CT including wiring

PVC pipe 40mm dia

PVC insulated wire 25 Sqmm single core Multistranded

Labour charges : digging of trench of 0.6m deep x 0.5mtr wide refilling the trench to the required ground level and consolidating etc, complete in an ordinary soil

Labour charges for laying of 1.1kv class UG cable in existing trench

Fixing of street light metering box with all accessaries like automatic contril/switch and single phase energy meter and with earth electrodee to grounding metering box