SPL REPAIRS TO THE EXISTING BOUNDARY WALL OF MH DEVLALI AND CERTAIN LBW WORKS UNDER THE AOR OF GE DEOLALI

Amount

Demolition of brick work stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified.

M&L for brick work with fly ash old size bricks, straight or curved on plan n.exc 6m mean radius, built in cm 1:6 complete all as specified and directed.

Ditto above but except bricks complete all as specified and directed

Taking down cement mortar/plastering on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, incl removing of surbs vegetation for up to working space etc.

M&L for rendering on fair faces of brick or concrete work 15mm thick in CM 1:4 and to be finished smooth for external surface complete all as specified and as directed by Engr-in-Charge.

Dismantling of posts or struts (wood, steel or RCC) any section embadded in concrete, including taking out embedded portion and making good disturbed ground all as specified and as directed.

Material and labour for PCC (1:4:8), type D-2 using 40 mm graded stone aggregate as in posts (including caps & bases), foundation including formwork complete all as specified and directed.

Material and labour for PCC (1:2:4), type B-1 using 20 mm graded stone aggregate as in coping, bed block for fixing of angle iron fencing post on wall or similar works,plinth course,string courses,lacing courses,parapets and railing,apex stone,bed plates etc including formwork complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed.

Supply and fixing mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or rivetting etc. and similar works conforming to Fe-290 (Gde E-165) complete all as specified and directed complete all as specified and directed. Note:- 1. Flat iron for securing wire mesh to be provided is to measured in this item. 2. Machine made screw bolt 10mm dia exceeding 5cm and not exceeding 10cm long shall be measured and paid seperately.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide all as specified and directed.

Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundations, shafts, wells, cesspits, manholes, laying pipe line, laying of cables or fixing poles and stays and struts etc. not exceeding 10 Sqm on plan and not exceeding 1.5 metre in depth and getting out in soft/loose soil including trimming the sides and forming bottom surfaces to required levels complete all as specified and directed.

Returning and filling including spreading, leveling watering and well ramming in layers not exceeding 25cm thick in soft/loose soil complete all as specified and directed.

Removing excavated material (surplus soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed.

S & F 10mm dia TMT bars and over cut to length bent to shape required including craking bending, spirally for hooping for columns, hooking ends and binding with mild steel wire ( annealed) not less than 0.90mm dia of wire or secruing with complete all as specified and directed.

S & F 5mm dia TMT bars and over upto and including 10mm dia as in stirrups, spacers and binders, spaces etc complete all as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for .Note- Rate includes for reinforcement cutting as required to facilitate demolition.

M&L for providing RCC (1:2:4) using 20mm graded stone aggregate as in coping, slab supported on wall, beam, lintels etc incl necessary formwork for sides and bottom and scafolding as required complete all as directed by Engrin charge.

M&L for preparation of surface of wall and applying two coat of exterior weather proof (on putty surface)100% anti fungal acrylic smooth emulsion with silicon additives that offer anti alge high performance exterior wall finish with 5 years of performance warranty by manufacturer applied by using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper, should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed. Make: Asian (apex ultima), Berger (wather coat), nerolac (excel total)

S & F in repairs galvanized 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing & straining & fixing to any type of standards rails straining bolts including securing or tying at crossing with & provn of galvanized mild steel wire complete all as specified and directed. (Each line wire to be measured)

Excavation in trenches n'exc 1.5 m width and n'exc 1.5 m in depth for foundation etc or far shafts,wellset n'exc 10 sqm on plan and n'exc 1.5 m in depth and getting out in any type of soil.

Excavation over area n exc 1.5M deep and getting out in soft/loose soil complete and directed complete all as specified and directed.

Excavation over areas exc 1.5M deep and nt exc 3.0M deep and getting out in hard/dense soil complete and directed complete all as specified and directed.

Excavation over areas exc 1.5M deep and nt exc 3.0M deep and getting out in hard/dense soil complete and directed complete all as specified and directed.

M&L cement concrete 1 : 4 : 8 type D-2 using 40mm graded stone aggregate as in fdn, filling & mass concrete complete all as specified and as directed.

M&L for Forming embankments including raising (or lowering) earth,spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape,etc., n exc. 1.5 m high from base all as specified and directed by Eng-incharge.

M&L for stone masonary walling of random rubble uncoursed ,well bonded, beded and solidly hearted built in CM 1:6

M&L for boulder pitching, grouted with cement and sand mortar including boulders all as specified and directed by engr incharge

M&L for Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses all as specified and directed by Engr in charge.

M&L for Raised pointing to random or polygonal rubble, uncoursed orbrought upto courses with cement mortar (1:4) all as specified and directed by Engr in charge.

S&F for 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall complete all as specified and as directed.

Providing precast ce- ment concrete (1:2:4)in bond stone (in retaining walls) win- dow or door cills, lintels,bressumers, steps,quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts,boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in cement mortar(1:4) complete with joints to match all as specified and directed by Engr in charge.

M&L for cement concrete 1:2:4 type B-1, using 20mm graded stone aggregate as in coping, bed blocks, filling of hold fast PCC or similar works including formwork complete all as specified and directed.

Formwork to edges of concrete flats, treads, breaks in floors window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide all as specified and directed by Engr -incharge

M&L RCC 1:2:4 type B1 ( using 20mm graded crushed stone aggregates) as in Beams, cantilevers, bressummers, lintels over 1.5m span

M&L for Rendering in 15mmin CM1:6 on brick work or concrete surfaces etc finished surfaces even and smooth complete all as specifed and directed.

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 all as specified and as directed.

M&L for precast cement concrete 1:2:4 type B1, (using 20mm graded stone aggregates) as in manhole cover slab set in CM (1:6) complete all as specified and directed.

M&L for mild steel work in reinforcement TMT bars , 10 mm dia and over as in reinforcement cut to length, bent to shape required including cranking, bending & hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for mild steel work in reinforcement TMT bars , 5 mm dia and over upto and including 10 mm dia as in stirpups ,spacers and binders as in reinforcements cut to length, bent to shape required including cranking, bending hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L RCC M-25 design mix as in Slabs supported on walls beams and columns in floors roofs, landings (using 20mm graded stone aggregates) complete all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs landings and similar work not exceeding 200mm thick (Horizontal or slopping) with fair finished curved surfaces

M&L for drilling/boring vertical bores with reverse rotary rig are any other suitable method as per latest enginerring technology practice without casing pipe with 202mm dia bit to a depth exceeding 30 m and not exc 40m below ground level includiing all necessary work required for boring and filling of pea gravels all round the lowered pipe etc complete all as specified and directed. Note (i) depth of boring shall be measured from of rechargewell. (ii) Pea gravels for filling shall be measered and paid for seperately

S&F machine pressed precast concrete interlocking paver block rubber moulded, any shape and size confirming ti IS-15658-2006 of 60mm thickness grey cement and with pigment , M-35 grade incl 30mm thick Sand filling to under interlocking tiles complete all as specified and directed.

M&L broken half burnt bricks loose filling with aggregates of guage 80 to 150mm in soakage pits soakage well ,rainwater harvesting pits complete

M&L for broken stone boulder of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

M&L for loose filling with pea gravel of size 1/8" to 3/8" to as in filter bed complete all as specified

S & F UPVC(sch-40) slotted pipe 200 mm outer dia including bends and fittings etc placed in bore holes complete all as specified and directed.

M & L for uPVC slotted pipe 100 mm outer dia including bends and fittings laid in trenches complete all as specified and directed

Note: Amount of sch of credit of Rs.40540/-will be deducted from total amount of BOQ.

M/s. JBSR ENTERPRISES. (BID ID -3485340)

BHUSHAN BHIMRAO PATIL (BID ID -3485535)

M/S R.K.S. CONSTRUCTION (BID ID -3476892)

M/S SAMEER SUBHASH PATANI (BID ID -3485921)

J Sams Contructions (BID ID -3480584)

PARADISE MILESTONE (BID ID -3479977)

VS CONSTRUCTION (BID ID -3480260)

KESHAV NIVRUTTI KADBHANE (BID ID -3476871)