Construction, repairing / renovation of the 54 Bn. B.S.F Troops at THQ and Coy at Torbung Bangla, Churachandpur District

Amount

THQ, LOKTAK

(A) SH:- 40 SM Barracks with attached toilet Blocks

EARTH WORK

Earthwork in excavation foundation trenches or drains including dressing of sides and ramming of bottoms and including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m. (a) Lift upto 1.5 m

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm.in depth, consolidating each deposited layer by ramming and watering lead upto 50 metres lift upto 1.5 metre.

Filling in plinth with sandy soil under floors including watering ramming, consolidating and dressing complete with a lead of 50m

CONCRETE WORK

Providing and laying cement concrete works in foundation and plinth excluding the cost of centering & shuttering in (a) C.C. 1:5:10 (1 cement :5 coarse sand :10 graded stone aggrt. 40mm nominal size).

REINFORCED CEMENT CONCRETE WORK

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (a)1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement :(a)1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)

Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete.(a) Mild steel and Medium Tensile steel bars.

(b) Thermo-Mechanically Treated bars.

FORMWORK

Providing form work i/c centering & shuttering so as to give a rough finish strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4m and removal of the same for insitu reinforced concrete to and plain concrete work in.(using 12mm shuttering ply)(a) Foundation footings, bases of columns etc. and mass concrete.

(b)Columns, pillars, posts and struts (square, rectangular or polygon in plan

(c) Sides and soffits of beams, beam haunchings, cantilivers, girders, bressumers and lintels not exceeding 1m in depth.

(d)Flat surface such as suspended flloor,roofs, landing & the like (i) floor etc upto 200mm in thickness

(e)Edges of slab and breaks in floor not exceeding 1m in depth

BRICK WORK

2nd class (local first class) brick work in foundation and plinth in cement mortar 1:4 (1 cement : 4 coarse sand)

Half brick masonry 2nd class (local first class) in cement mortar 1:4 (1 cement : 4 coarse sand) in superstructure.(i) Above plinth level upto 1st floor level.

STONE WORK

Polygonal rubble masonary/R.R. masonary (uncoursed/ brought to course)/Sq. rubble masonary (uncoursed/ brought to courses) with hard stone of approved quality in foundation and plinth in cement mortar 1 : 6 (1 cement : 6 course sand) including levelling with cement concrete 1 : 6 : 12 (1 cement : 6 course sand : 12 gr. st. aggregate 20 mm nominal size).

WOOD WORK

Providing wood work in frames of doors, windows, c/windows & other frame and fixed in position.(a)Local best quality Teak wood.

Providing and fixing 38mm thick panelled and glazed or panelled and glazed shutters for doors, windows, c/windows ect. Including bright finished brass hinges with necessary screws-(a) Local best quality Teak wood.

Providing wood work in frames of false ceiling, partition etc. sawn and put in position (a) Uchan/Tairen wood.

Providing and Fixing local best quality plain lining tongued and grooved and includind wooden plug complete with necessary screws and priming coat on unexposed surface-(a) uchan/Tairen wood.

Providing & fixing M.S. round or square bars at required spacings in windows frame of window & clerestory window.

Providing 40x3mm flat iron hold fast 40cm long i/c fixing to frames with 10mm dia bolts, nuts and wooden plugs and embedding to cement concrete block 30x10 x15cm 1:3:6 (1 cement : 3 coarse sand : 6 stone aggrt. 20mm nominal guage).

Providing and fixing AL sliding bolts Bright finished or black enamelled with nut & screws etc.complete (a) 300 x 16 mm.

P/F Al. Tower bolts with screws & nuts complete,(a) 250x10 mm

P/F Al. Handles with screws & nuts complete,(a) 125mm

P/F20 mm thick plank as eave board with (a) Uchan/Tolhao wood

ROOFING WORKS

C.G.I. sheet 24 B.G. fixed with galvanised iron J or L hooks 8mm dia G.I. limpet and bitumen washer complete, excluding the cost of purlins, rafter and trusses.

Ridges and valleys 450 mm overall in plain G.I. sheets 22 BG fixed with galvanised iron J or L hooks 8 mm dia. Limpet and bitumen washers complete.

Providing and fixing 4mm thick Rhino Brand A.C.Duro Board (Plain sheet) of 610x610 mm ceiling Roofing and Ceiling Item) with wooden beading 62x12mm Leihao wood spaced 61 cm centre to centre maximum on both sides etc complete ( frame work to be paid separately).

Providing and fixing 40 X 6 mm FB wind ties to G.I. sheet roof with hook bolts.

TUBULAR TRUSSES/STEEL/ALUMINIUM WINDOWS.

Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a coat of approved steel primer red oxide chrome primer conforming to IS 2079, welded and bolted incluiding special shape washer etc. complete. (a) Electric resistant welded tube 9 Conforming to IS : 1611 - 1979).

Steel glazed windows and ventilators of rolled steel section joints mitred and welded with 15x3mm lugs 10cm long with steel plugs embebded in cement concrete block 15x10x10cm of 1:3:6(1 cement : 3 coarse sand : 6 stone aggregate 20mm nominal size) or wooden plugs and screws of rawl plugs and scerws or with fixing clips with bolts and nuts as required incuding provinding and fixing of 4mm thick glass panes with glazing clips complete inculding applying a priming coat of approved steel primer exculding cost of mental beading and other fitting except necessary hinges or pivots as required -(i) ready made steel windows (side hung / top hung).

Providing and Fixing M.S . Round holding down or anchor bolts with nuts & washer plates complete.

FLOORING

Vitrified tiles 10mm in flooring, treads or steps & landing laid on a bed of 12 mm thick cement mortar 1:3 (1 cement:3 coarse sand) finished with flush pointing in white cement.(i) 60x60 cm size

Vitrified tiles 10mm in skirting riser of steps & dado on 10 mm thick cement mortar 1:3 (1 cement:3 coarse sand) & jointed with white cement slurry.(i) 60x60 cm size

FINISHING

12mm cement plaster 1:4 (1 cement : 4 coarse sand).

15mm cement plaster 1:4 (1 cement : 4 coarse sand).

15 mm cement plaster 1:3(1 cement:3 coarse sand)finished with a floating coat of neat cement.

Coat tarring two coats on new work using 10 sqm. not less than 1.6 litres of coat tar of approved quality for 1st coat 1.2 litres for second coat.

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete.

Painting on wall with (two coats) of Dulux Acrylic emulsion(Supreme 3 in 1) paint or equivalent of approved quality in all shades on new work to give an even shade.

Finishing wall weather shield paint of approved quality on new work (three or more coats) to give an even shade.

Applying ready mixed priming coat pink primer of approved quality on wood work.

Applying ready mixed priming coat (genuine red lead of appd. Quality) on steel work.

Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of appd. quality in all shades on new work to give an even shade.

Painting (two or more coats excluding priming coat) with superior ready mixed paint for steel work of approved quality in all shades on new steel work to give an even shade.

MISCELLANEOUS

Providing under layer for plinth protection of 75 mm thick (unconsolidated) of stone aggrt. 40 mm nominal size wall rammed & consolidated & grouted with fine sand i/c finishing the top of concrete smooth.

Providing plinth protection 50 mm thick in cement concrete 1: 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggrt. of 20 mm nominal size) i/c finishing the top surface of concrete smooth.

2nd class brick masonary 15x15cm open surface drain in c.m. 1: 5(1cem : 5 c/sand) i/c earth excavation 10cm bed c.c.1: 5 : 10 1cem : 5 c/sand :10gr.st.aggrt.40mm n/size i/c 12mm thick cement plaster 1: 3 (1cem : 3 c/sand) with a floating coat of neat cement inside & outside as per standard design.

Providing and laying cement concrete in foundation and plinth excluding the cost of centering and shuttering in (a)1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

(b)1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size)

P/F C.I. Cover with frame (for manhole and chambers) (a) 600mm x450mm (heavy duty)(38 Kg)

Earth work in excavation in hill cutting including disposal of excavated earth lead upto 50 metres and lift upto 1.5 metres disposed earth to be leveled and neatly dressed.(a)Hard/Dense Soil.

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:(i)White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:(a) White Vitreous China Flat back wash basin size 450x 300 mm with single 15mm C.P. brass pillar tap

Providing and fixing 600 X 20 mm SONA C.P. brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C.P. brass screws (Hook type).

Providing and fixing soap container of glass with C.P. lid and brackets fixed to wooden cleats with C.P. brass screws.

Providing and fixing Telephonic shower rose with 12.5 mm or 19 mm inlet.(a) 15 mm diameter. Ordinary

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :.(i) Rectangular shape 453x357 mm

Providing and fixing 100 mm H.C.I. Soil,waste & vent pipes.

Providing and fixing 50 mm HCI soil waste and vent pipe.

Providing and fixing HCI traps with 100 mm inlet and 100 mm outlet of self cleaning design with HCI screwed down of hinged grating with or without vent arm complete i/c cost of cutting and making good the walls and floors.

Providing and fixing 100mm HCI plain bend of required degree.

Providing and fixing 100 x 100 x 100 mm HCI branch of the required degree with access doors, insertion rubber washer 3 mm thick bolts and nuts complete.

Providing and fixing MS holder bat clamps of approved design to 100 mm HCI pipe socket i/c cost of cutting holes and making good the walls etc.

Providing and fixing 100 mm HCI bend of the required degree with access door insertion rubber washers bolts and nuts etc. complete.

Providing and fixing MS holder bat clamps of approved design to 50 mm HCI pipe socket i/c cost of cutting holes and making good the walls etc.

Providing and fixing 50 mm HCI terminal guard.

Providing and fixing 50 mm HCI plain band of required degree.

Providing and fixing lead chaulked joints to 50 mm HCI pipes

Providing and fixing lead chaulked joints to 100 mm HCI pipes

Providing and fixing C.P. brass bib cock of superior quality.a) 15 mm diameter (Ordinary).

Providing and fixing brass stop cock of superior quality. (a) 25 mm diameter.

Providing and fixing brass full way G.M valve with CI wheel of approved quality.(a) 25 mm diameter

Providing and fixing GI pipes complete with GI fittings i/c trenching and refilling etc. (external work).(a) 25 mm diameter

Providing and fixing G.I. pipes complete with G.I. fittings and clamps i/c cutting and making good the walls etc. (Internal work).(a) 15 mm diameter

Providing and fixing WATER STORAGE TANKS (Sintex) with 400 mm diameter nominal base G.I. overflow tube 25 mm nominal G.I. inlet and 15 mm nominal G.I. outlet tube i/c hoisting a height of 10 m above ground level. (a)1000 litres net capacity storage tanks

IEI WORK

SH:- Providing IEI in the 40 S.M. Barrack attached toilet Blocks.

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit with piano type switch phenolic laminated sheet suitable size MS-box and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc.as reqd.

Group A

Group B

Group C

Wiring for light point/power plug with 2X4mm2 FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit with 1 No. 4mm2 FR PVC insulated copper conductor single core cable for loop earthing etc.as reqd.

Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in surface/recessed PVC conduit etc.as reqd.

2X1.5mm2+1X1.5mm2 earth wire

2X2.5mm2+1X2.5mm2 earth wire

2X4mm2+1X4mm2 earth wire

Supply and fixing (following modular type switch/socket) on the existing switch box/cover i/c connection etc as reqd.

5/6 amps switch

15/16 amps switch

3 pin 5/6 amps socket outlet

6 pin 15/16 amps socket outlet

P/L 4mm2 twin core pvc ins.(heavy duty) Cu. cond. armoured cable of 1.IKV grade in size not exceedng 25mm2 direct in ground i/c excavation, sand cushioning protective covering and refilling the trench etc.as reqd.

S/F brass batten/angle holder i/c connection etc.as reqd.

SITC surface mounted LED Down Lighter with white powder coated Al. housing with integrated electronic driver 15 W 840 LHEAAGP6IA2W012 complete with connection as rqd. (Havell's)

S/F 12W LED bulb

S/F 48"sweep (1200mm) AC ceiling fan complete with down rod,canopy, 3 (three) bladesetc.as reqd. (Make Bajaj/Usha/Crompton/Orient)

S/F stepped type electronic fan regulator on the existing modular plate sewitch box i/c connection but excluding modular plate etc.

S/F fan hook i/c bolt & nuts.

Installation of exhaust fan upto 450mm sweep in the existing opening i/c making the hole to suit the size of the above fan, making good the damaged, connection testing commissioning etc. as reqd.

S/F 305mm sweep exhaust fan complete with accessories i/c connection etc. as reqd.

SITC 50W LED 5000K energy saving IP 65 Flood Light luminaries with high power LED as light source Havell's JETACOMPECTOFL50W LED 757LTG complete with connection as rqd. (Havell's)

P/F 60 amp MCSPN switch unit 240/250v with rewireable fuses i/c drilling holes on the board connection, earthing the body etc.as reqd.

S/F (following way) single pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar, hinged front sacrylic cover for the MCCB knobs detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+4 way

S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. (a) Single pole

Supplying & fixing (following rating) double pole 240V isolator in existing MCB DB complete with connection testing & commissioning as reqd. (a) 40 amp

P/F 300x450x60mm(n/size) with permissible variation of plus minus 5mm in size wooden board complete with locking arrangement and painting etc.

Earthing with G.I.earth pipe 4.5mt.long and 40 mm dia. i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.as reqd.

Extra for using salt and charcoal for pipe electrode as reqd.

P/F 4.06mm dia.copper wire on surface or in recess for loop earthing etc.as reqd.

Supply & Fixing swaged type steel tubular pole 8 mtr. Long as per 410 SP 14.conforming to IS 2713 (Pt.II) 1980 with bracket in cement concrete 1:3:6 (1:cement:3c/sand:6 gr. st. 40 mm n/size) foundation i/c excavation and refilling etc. as requred.

Supply and drawing of AB Cable of size (3x50 + 1x35) mm2

(B) Construction of Kitchen cum dining hall

EARTH WORK

Earthwork in excavation foundation trenches or drains including dressing of sides and ramming of bottoms and including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m. (a) Lift upto 1.5 m

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm.in depth, consolidating each deposited layer by ramming and watering lead upto 50 metres lift upto 1.5 metre.

Filling in plinth with sandy soil under floors including watering ramming, consolidating and dressing complete with a lead of 50m

CONCRETE WORK

Providing and laying cement concrete works in foundation and plinth excluding the cost of centering & shuttering in (a) C.C. 1:5:10 (1 cement :5 coarse sand :10 graded stone aggrt. 40mm nominal size).

REINFORCED CEMENT CONCRETE WORK

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (a)1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement :(a)1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)

Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete.(a) Mild steel and Medium Tensile steel bars.

(b) Thermo-Mechanically Treated bars.

FORMWORK

Providing form work i/c centering & shuttering so as to give a rough finish strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4m and removal of the same for insitu reinforced concrete to and plain concrete work in.(using 12mm shuttering ply)(a) Foundation footings, bases of columns etc. and mass concrete.

(b)Columns, pillars, posts and struts (square, rectangular or polygon in plan

(c) Sides and soffits of beams, beam haunchings, cantilivers, girders, bressumers and lintels not exceeding 1m in depth.

(d)Flat surface such as suspended flloor,roofs, landing & the like (i) floor etc upto 200mm in thickness

(e)Edges of slab and breaks in floor not exceeding 1m in depth

BRICK WORK

2nd class (local first class) brick work in foundation and plinth in cement mortar 1:4 (1 cement : 4 coarse sand)

Half brick masonry 2nd class (local first class) in cement mortar 1:4 (1 cement : 4 coarse sand) in superstructure.(i) Above plinth level upto 1st floor level.

STONE WORK

Polygonal rubble masonary/R.R. masonary (uncoursed/ brought to course)/Sq. rubble masonary (uncoursed/ brought to courses) with hard stone of approved quality in foundation and plinth in cement mortar 1 : 6 (1 cement : 6 course sand) including levelling with cement concrete 1 : 6 : 12 (1 cement : 6 course sand : 12 gr. st. aggregate 20 mm nominal size).

WOOD WORK

Providing wood work in frames of doors, windows, c/windows & other frame and fixed in position.(a)Local best quality Teak wood.

Providing and fixing 38mm thick panelled and glazed or panelled and glazed shutters for doors, windows, c/windows ect. Including bright finished brass hinges with necessary screws-(a) Local best quality Teak wood.

Providing wood work in frames of false ceiling, partition etc. sawn and put in position (a) Uchan/Tairen wood.

Providing and Fixing local best quality plain lining tongued and grooved and includind wooden plug complete with necessary screws and priming coat on unexposed surface-(a) uchan/Tairen wood.

Providing 40x3mm flat iron hold fast 40cm long i/c fixing to frames with 10mm dia bolts, nuts and wooden plugs and embedding to cement concrete block 30x10 x15cm 1:3:6 (1 cement : 3 coarse sand : 6 stone aggrt. 20mm nominal guage).

Providing & fixing M.S. round or square bars at required spacings in windows frame of window & clerestory window.

Providing & fixing expanded metal 20X60 mm strands 3.25 m wide and 1.6mm thick for windows etc including 60X20mm beading of 1st class Uningthou wood.

Providing and fixing AL sliding bolts Bright finished or black enamelled with nut & screws etc.complete (a) 300 x 16 mm.

P/F Al. Tower bolts with screws & nuts complete,(a) 250x10 mm

P/F Al. Handles with screws & nuts complete,(a) 125mm

P/F20 mm thick plank as eave board with (a) Uchan/Tolhao wood

ROOFING WORKS

C.G.I. sheet 24 B.G. fixed with galvanised iron J or L hooks 8mm dia G.I. limpet and bitumen washer complete, excluding the cost of purlins, rafter and trusses.

Ridges and valleys 450 mm overall in plain G.I. sheets 22 BG fixed with galvanised iron J or L hooks 8 mm dia. Limpet and bitumen washers complete.

Providing and fixing 4mm thick Rhino Brand A.C.Duro Board (Plain sheet) of 610x610 mm ceiling Roofing and Ceiling Item) with wooden beading 62x12mm Leihao wood spaced 61 cm centre to centre maximum on both sides etc complete ( frame work to be paid separately).

Providing and fixing 40 X 6 mm FB wind ties to G.I. sheet roof with hook bolts.

TUBULAR TRUSSES/STEEL/ALUMINIUM WINDOWS.

Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a coat of approved steel primer red oxide chrome primer conforming to IS 2079, welded and bolted incluiding special shape washer etc. complete. (a) Electric resistant welded tube 9 Conforming to IS : 1611 - 1979).

Steel glazed windows and ventilators of rolled steel section joints mitred and welded with 15x3mm lugs 10cm long with steel plugs embebded in cement concrete block 15x10x10cm of 1:3:6(1 cement : 3 coarse sand : 6 stone aggregate 20mm nominal size) or wooden plugs and screws of rawl plugs and scerws or with fixing clips with bolts and nuts as required incuding provinding and fixing of 4mm thick glass panes with glazing clips complete inculding applying a priming coat of approved steel primer exculding cost of mental beading and other fitting except necessary hinges or pivots as required -(i) ready made steel windows (side hung / top hung).

Providing and Fixing M.S . Round holding down or anchor bolts with nuts & washer plates complete.

FLOORING

Vitrified tiles 10mm in flooring, treads or steps & landing laid on a bed of 12 mm thick cement mortar 1:3 (1 cement:3 coarse sand) finished with flush pointing in white cement.(i) 60x60 cm size

Vitrified tiles 10mm in skirting riser of steps & dado on 10 mm thick cement mortar 1:3 (1 cement:3 coarse sand) & jointed with white cement slurry.(i) 60x60 cm size

FINISHING

12mm cement plaster 1:4 (1 cement : 4 coarse sand).

15mm cement plaster 1:4 (1 cement : 4 coarse sand).

15 mm cement plaster 1:3(1 cement:3 coarse sand)finished with a floating coat of neat cement.

Coat tarring two coats on new work using 10 sqm. not less than 1.6 litres of coat tar of approved quality for 1st coat 1.2 litres for second coat.

Painting on wall with (two coats) of Dulux Acrylic emulsion(Supreme 3 in 1) paint or equivalent of approved quality in all shades on new work to give an even shade.

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete.

Finishing wall weather shield paint of approved quality on new work (three or more coats) to give an even shade.

Applying ready mixed priming coat pink primer of approved quality on wood work.

Applying ready mixed priming coat (genuine red lead of appd. Quality) on steel work.

Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of appd. quality in all shades on new work to give an even shade.

Painting (two or more coats excluding priming coat) with superior ready mixed paint for steel work of approved quality in all shades on new steel work to give an even shade.

MISCELLANEOUS

Providing under layer for plinth protection of 75 mm thick (unconsolidated) of stone aggrt. 40 mm nominal size wall rammed & consolidated & grouted with fine sand i/c finishing the top of concrete smooth.

Providing plinth protection 50 mm thick in cement concrete 1: 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggrt. of 20 mm nominal size) i/c finishing the top surface of concrete smooth.

2nd class brick masonary 15x15cm open surface drain in c.m. 1: 5(1cem : 5 c/sand) i/c earth excavation 10cm bed c.c.1: 5 : 10 1cem : 5 c/sand:10gr.st.aggrt.40mm n/size i/c 12mm thick cement plaster 1: 3 (1cem : 3 c/sand) with a floating coat of neat cement inside & outside as per standard design.

Earth work in excavation in hill cutting including disposal of excavated earth lead upto 50 metres and lift upto 1.5 metres disposed earth to be leveled and neatly dressed.(a)Hard/Dense Soil.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets, 15 mm CP brass pillar taps and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :(a) Kitchen sink with drain board(i)510x1040 mm bowl depth 250 mm

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:(a) White Vitreous China Flat back wash basin size 450x 300 mm with single 15mm C.P. brass pillar tap

Providing and fixing 600 X 20 mm SONA C.P. brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C.P. brass screws (Hook type).

Providing and fixing soap container of glass with C.P. lid and brackets fixed to wooden cleats with C.P. brass screws.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :.(i) Rectangular shape 453x357 mm

Providing and fixing 50 mm HCI soil waste and vent pipe.

Providing and fixing 50 mm HCI plain band of required degree.

Providing and fixing lead chaulked joints to 50 mm HCI pipes

Providing and fixing C.P. brass bib cock of superior quality.a) 15 mm diameter (Ordinary).

Providing and fixing brass stop cock of superior quality. (a) 25 mm diameter.

Providing and fixing GI pipes complete with GI fittings i/c trenching and refilling etc. (external work).(a) 25 mm diameter

Providing and fixing G.I. pipes complete with G.I. fittings and clamps i/c cutting and making good the walls etc. (Internal work).(a) 15 mm diameter

Providing and fixing WATER STORAGE TANKS (Sintex) with 400 mm diameter nominal base G.I. overflow tube 25 mm nominal G.I. inlet and 15 mm nominal G.I. outlet tube i/c hoisting a height of 10 m above ground level. (a)1000 litres net capacity storage tanks

IEI WORK

SH:- Providing IEI in the Kitchen cum dining hall.

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit with piano type switch phenolic laminated sheet suitable size MS-box and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc.as reqd.

Group A

Group B

Group C

Wiring for light point/power plug with 2X4mm2 FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit with 1 No. 4mm2 FR PVC insulated copper conductor single core cable for loop earthing etc.as reqd.

Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in surface/recessed PVC conduit etc.as reqd.

2X1.5mm2+1X1.5mm2 earth wire

2X2.5mm2+1X2.5mm2 earth wire

2X4mm2+1X4mm2 earth wire

Supply and fixing (following modular type switch/socket) on the existing switch box/cover i/c connection etc as reqd.

5/6 amps switch

15/16 amps switch

3 pin 5/6 amps socket outlet

6 pin 15/16 amps socket outlet

P/L 4mm2 twin core pvc ins.(heavy duty) Cu. cond. armoured cable of 1.IKV grade in size not exceedng 25mm2 direct in ground i/c excavation, sand cushioning protective covering and refilling the trench etc.as reqd.

S/F brass batten/angle holder i/c connection etc.as reqd.

SITC surface mounted LED Down Lighter with white powder coated Al. housing with integrated electronic driver 15 W 840 LHEAAGP6IA2W012 complete with connection as rqd. (Havell's)

S/F 12W LED bulb

S/F 48"sweep (1200mm) AC ceiling fan complete with down rod,canopy, 3 (three) bladesetc.as reqd. (Make Bajaj/Usha/Crompton/Orient)

S/F stepped type electronic fan regulator on the existing modular plate sewitch box i/c connection but excluding modular plate etc.

S/F fan hook i/c bolt & nuts.

Installation of exhaust fan upto 450mm sweep in the existing opening i/c making the hole to suit the size of the above fan, making good the damaged, connection testing commissioning etc. as reqd.

S/F 305mm sweep exhaust fan complete with accessories i/c connection etc. as reqd.

SITC 50W LED 5000K energy saving IP 65 Flood Light luminaries with high power LED as light source Havell's JETACOMPECTOFL50W LED 757LTG complete with connection as rqd. (Havell's)

P/F 60 amp MCSPN switch unit 240/250v with rewireable fuses i/c drilling holes on the board connection, earthing the body etc.as reqd.

S/F (following way) single pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar, hinged front sacrylic cover for the MCCB knobs detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+6 way single door

S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. (a) Single pole

Supplying & fixing (following rating) double pole 240V isolator in existing MCB DB complete with connection testing & commissioning as reqd. (a) 40 amp

P/F 300x450x60mm(n/size) with permissible variation of plus minus 5mm in size wooden board complete with locking arrangement and painting etc.

Earthing with G.I.earth pipe 4.5mt.long and 40 mm dia. i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.as reqd.

Extra for using salt and charcoal for pipe electrode as reqd.

P/F 4.06mm dia.copper wire on surface or in recess for loop earthing etc.as reqd.

Supply & Fixing swaged type steel tubular pole 8 mtr. Long as per 410 SP 14.conforming to IS 2713 (Pt.II) 1980 with bracket in cement concrete 1:3:6 (1:cement:3c/sand:6 gr. st. 40 mm n/size) foundation i/c excavation and refilling etc. as requred.

Supply and drawing of AB Cable of size (3x50 + 1x35) mm2

( C )Toilet Block-10 Baths for(J) Personal

EARTH WORK

Earth work in excavation in foundation trenches or drains i/c dressing of sides and ramming of bottoms,including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead to 50 m.in Hard dense soil. (a) Lift upto 1.5 m

Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming & watering lead upto 50m and lift upto 1.5m.

Filling in plinth with sandy soil under floors including watering ramming,consolidating and dressing complete with a lead of 50m

CONCRETE WORKS

P/L cement concrete in foundation and plinth excluding the cost of centering and shuttering : - (a) 1:5:10 (1 cem :5 Coarse sand: 10 graded stone aggrt. 40mm nominal size).

R.C.C. WORKS

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (a)1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement :(a)1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)

Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete.(a) Mild steel and Medium Tensile steel bars.

(b) Thermo-Mechanically Treated bars.

FORM WORKS

Providing form work i/c centering & shuttering so as to give a rough finish strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4m and removal of the same for insitu reinforced concrete to and plain concrete work in. (using 12mm shuttering ply) (a) Foundation footings, bases of columns etc. and mass concrete.

(b) Columns, pillars, posts and struts (square, rectangular or polygon in plan).

(c) Sides & soffits of beams, beam haunchings, cantilevers, girders, bressummers and lintels not exceeding 1m in depth.

STONE WORK

Polygonal rubble masonary/R.R. masonary (uncoursed/brought to course)/Sq. rubble masonary (uncoursed/brought to courses) with hard stone of approved quality in foundation and plinth in cement mortar 1 : 6 (1 cement : 6 course sand) including levelling with cement concrete 1 : 6 : 12 (1 cement : 6 course sand : 12 gr. st. aggregate 20 mm nominal size).

BRICKS WORKS

2nd class (local first class) brick work in foundation and plinth level in cement mortar 1:4(1 Cem:4C/Sand)

Half brick masonry 2nd class (local first class) in cement mortar 1:4 (1 cement : 4 coarse sand) in superstructure above plinth.

WOOD WORKS

Providing wood work in frames of doors, windows, c/windows & other frame and fixed in position. (a) local best qlty Leihao wood.

Providing and fixing 38 mm thick panelled and glazed or panelled and glazed shutters for doors, windows, c/windows etc. including bright finished brass hinges with necessary screws - (a) local best qlty Leihao wood.

Providing 40x3mm flat iron hold fast 40cm long i/c fixing to frames with 10mm dia bolts, nuts and wooden plugs and embedding to cement concrete block 30x10x15cm 1:3:6 (1 cement : 3 coarsesand : 6 stone aggrt. 20mm nominal guage).

Providing wood work in trusses, purlins, rafter, posts, post plate wall plate & the like wrought framed hoisted & fixed in position. (c) Uchan/Tairen/Tolhao/Khangra.

Supplying 40 X 3 X 275 mm FB twisted plate including cost of bolts and nuts.

P/F Al.. Sliding door bolts 300X16 mm with screws & nuts complete.

P/F Al. Tower bolts with screws & nuts complete. (a) 250x10 mm

Providing and Fixing MS round or square bars required spacing in window & clerestory window.

P/F Al. Handles with screws & nuts complete. (a) 125 mm

STEEL WORKS

Providing & fixing M.S. round holding down or anchor bolts with nuts & washer plates complete.

Providing and fixing 40 X 6 mm FB wind ties to G.I. sheet roof with hook bolts.

G.I. sheet gutters 24 B.G. semi-circular150 mm width 450 mm over all i/c fixed with clamps& making connection with rain water pipe complete.

FLOORING

40 mm cement concrete flooring 1:2:4 (1 Cement: 2 coarse sand: 4 stone aggregate 20 mm & down gauge) finished with a floating coat of neat cement.

ROOFING & CEILING

C.G.I. sheet 24 B.G. fixed with galvanised iron J or L hooks 8mm dia G.I. limpet and bitumen washer complete, excluding the cost of purlins, rafter and trusses.

Ridges and valleys 450 mm overall in plain G.I. sheets 22 BG fixed with galvanised iron J or L hooks 8 mm dia. Limpet and bitumen washers complete.

FINISHING

12mm cement plaster 1:4 (1 cement : 4 coarse sand).

15mm cement plaster 1:4 (1 cement : 4 coarse sand).

15 mm cement plaster 1:3(1 cement:3 coarse sand)finished with a floating coat of neat cement.

Coal tarring two coats on new work using 10 sqm. not less than 1.6 litres of coat tar of approved quality for 1st coat 1.2 litres for second coat.

Painting on wall with ( two coats ) of plastic emulsion paint of approved quality in all shades on new work to give an even shade

provoding and applying plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete

Finishing walls weather shield paint of approved quality on new work (three or more coats) to give even shade

Applying ready mixed priming coat pink primer of appd. quality on wood work.

Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of appd. quality in all shades on new work to give an even shade.

MISCELLANEOUS

Providing under layer for plinth protection of 75 mm thick (unconsolidated) of stone aggrt. 40 mm nominal size wall rammed & consolidated & grouted with fine sand i/c finishing the top of concrete smooth.

Providing plinth protection 50 mm thick in cement concrete 1: 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggrt. of 20 mm nominal size) i/c finishing the top surface of concrete smooth.

2nd class brick masonary 15x15cm open surface drain in c.m. 1: 5(1cem : 5 c/sand) i/c earth excavation 10cm bed c.c.1: 5 : 10 1cem : 5 c/sand :10gr.st.aggrt.40mm n/size i/c 12mm thick cement plaster 1: 3 (1cem : 3 c/sand) with a floating coat of neat cement inside & outside as per standard design.

P/F20 mm thick plank as eave board with (a) Uchan/Tolhao wood

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:(a) White Vitreous China Flat back wash basin size 450x 300 mm with single 15mm C.P. brass pillar tap

Providing and fixing 600 X 20 mm SONA C.P. brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C.P. brass screws (Hook type).

Providing and fixing soap container of glass with C.P. lid and brackets fixed to wooden cleats with C.P. brass screws.

Providing and fixing Telephonic shower rose with 12.5 mm or 19 mm inlet.(a) 15 mm diameter. Ordinary

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :.(i) Rectangular shape 453x357 mm

Providing and fixing HCI traps with 100 mm inlet and 100 mm outlet of self cleaning design with HCI screwed down of hinged grating with or without vent arm complete i/c cost of cutting and making good the walls and floors.

Providing and fixing 50 mm HCI soil waste and vent pipe.

Providing and fixing MS holder bat clamps of approved design to 50 mm HCI pipe socket i/c cost of cutting holes and making good the walls etc.

Providing and fixing 50 mm HCI plain band of required degree.

Providing and fixing lead chaulked joints to 50 mm HCI pipes

Providing and fixing C.P. brass bib cock of superior quality.a) 15 mm diameter (Ordinary).

Providing and fixing brass stop cock of superior quality. (a) 25 mm diameter.

Providing and fixing brass full way G.M valve with CI wheel of approved quality.(a) 25 mm diameter

Providing and fixing GI pipes complete with GI fittings i/c trenching and refilling etc. (external work).(a) 25 mm diameter

Providing and fixing G.I. pipes complete with G.I. fittings and clamps i/c cutting and making good the walls etc. (Internal work).(a) 15 mm diameter

Providing and fixing WATER STORAGE TANKS (Sintex) with 400 mm diameter nominal base G.I. overflow tube 25 mm nominal G.I. inlet and 15 mm nominal G.I. outlet tube i/c hoisting a height of 10 m above ground level. (a)1000 litres net capacity storage tanks

IEI WORK

SH:- Toilet Block-10 bath for (J) Personal.

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 FR PVC insulated copper conductor single core cable in presto plast cassing and capping with modular type switch and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc.as reqd.

Group B

Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in surface/recessed PVC conduit etc.as reqd.

(a) 2X2.5mm2+1X2.5mm2 earth wire

P/L 4mm2 twin core pvc ins.(heavy duty) Cu. cond. armoured cable of 1.IKV grade in size not exceedng 25mm2 direct in ground i/c excavation, sand cushioning protective covering and refilling the trench etc.as reqd.

S/F brass batten/angle holder i/c connection etc.as reqd.

S/F 12W LED bulb.

SITC 50W LED 5000K energy saving IP 65 Flood Light luminaries with high power LED as light source Havell's JETACOMPECTOFL50W LED 757LTG complete with connection as rqd. (Havell's)

S/F (following way) single pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar, hinged front sacrylic cover for the MCCB knobs detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+4 way

S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. (a) Single pole

Supplying & fixing (following rating) double pole 240V isolator in existing MCB DB complete with connection testing & commissioning as reqd. (a) 40 amp

P/F 300x450x60mm(n/size) with permissible variation of plus minus 5mm in size wooden board complete with locking arrangement and painting etc.

Supply & Fixing swaged type steel tubular pole 8 mtr. Long as per 410 SP 14.conforming to IS 2713 (Pt.II) 1980 with bracket in cement concrete 1:3:6 (1:cement:3c/sand:6 gr. st. 40 mm n/size) foundation i/c excavation and refilling etc. as requred.

Supply and drawing of AB Cable of size (3x50 + 1x35) mm2

( C )Toilet Block-10 W C for(J) Personal

EARTH WORK

Earth work in excavation in foundation trenches or drains i/c dressing of sides and ramming of bottoms,including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead to 50 m.in Hard dense soil. (a) Lift upto 1.5 m

Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming & watering lead upto 50m and lift upto 1.5m.

Filling in plinth with sandy soil under floors including watering ramming,consolidating and dressing complete with a lead of 50m

CONCRETE WORKS

P/L cement concrete in foundation and plinth excluding the cost of centering and shuttering : - (a) 1:5:10 (1 cem :5 Coarse sand: 10 graded stone aggrt. 40mm nominal size).

R.C.C. WORKS

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (a)1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement :(a)1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)

Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete.(a) Mild steel and Medium Tensile steel bars.

(b) Thermo-Mechanically Treated bars.

FORM WORKS

Providing form work i/c centering & shuttering so as to give a rough finish strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4m and removal of the same for insitu reinforced concrete to and plain concrete work in. (using 12mm shuttering ply) (a) Foundation footings, bases of columns etc. and mass concrete.

(b) Columns, pillars, posts and struts (square, rectangular or polygon in plan).

(c) Sides & soffits of beams, beam haunchings, cantilevers, girders, bressummers and lintels not exceeding 1m in depth.

(d)Flat surface such as suspended flloor,roofs, landing & the like (i) floor etc upto 200mm in thickness

(e)Edges of slab and breaks in floor not exceeding 1m in depth

STONE WORK

Polygonal rubble masonary/R.R. masonary (uncoursed/brought to course)/Sq. rubble masonary (uncoursed/brought to courses) with hard stone of approved quality in foundation and plinth in cement mortar 1 : 6 (1 cement : 6 course sand) including levelling with cement concrete 1 : 6 : 12 (1 cement : 6 course sand : 12 gr. st. aggregate 20 mm nominal size).

BRICKS WORKS

2nd class (local first class) brick work in foundation and plinth level in cement mortar 1:4(1 Cem:4C/Sand)

Half brick masonry 2nd class (local first class) in cement mortar 1:4 (1 cement : 4 coarse sand) in superstructure above plinth.

WOOD WORKS

Providing wood work in frames of doors, windows, c/windows & other frame and fixed in position. (a) local best qlty Leihao wood.

Providing and fixing 38 mm thick panelled and glazed or panelled and glazed shutters for doors, windows, c/windows etc. including bright finished brass hinges with necessary screws - (a) local best qlty Leihao wood.

Providing 40x3mm flat iron hold fast 40cm long i/c fixing to frames with 10mm dia bolts, nuts and wooden plugs and embedding to cement concrete block 30x10x15cm 1:3:6 (1 cement : 3 coarsesand : 6 stone aggrt. 20mm nominal guage).

Providing wood work in trusses, purlins, rafter, posts, post plate wall plate & the like wrought framed hoisted & fixed in position. (c) Uchan/Tairen/Tolhao/Khangra.

Supplying 40 X 3 X 275 mm FB twisted plate including cost of bolts and nuts.

P/F Al.. Sliding door bolts 300X16 mm with screws & nuts complete.

P/F Al. Tower bolts with screws & nuts complete. (a) 250x10 mm

P/F Al. Handles with screws & nuts complete. (a) 125 mm

Providing and Fixing MS round or square bars required spacing in window & clerestory window.

STEEL WORKS

Providing & fixing M.S. round holding down or anchor bolts with nuts & washer plates complete.

Providing and fixing 40 X 6 mm FB wind ties to G.I. sheet roof with hook bolts.

G.I. sheet gutters 24 B.G. semi-circular150 mm width 450 mm over all i/c fixed with clamps& making connection with rain water pipe complete.

FLOORING

40 mm cement concrete flooring 1:2:4 (1 Cement: 2 coarse sand: 4 stone aggregate 20 mm & down gauge) finished with a floating coat of neat cement.

ROOFING & CEILING

C.G.I. sheet 24 B.G. fixed with galvanised iron J or L hooks 8mm dia G.I. limpet and bitumen washer complete, excluding the cost of purlins, rafter and trusses.

Ridges and valleys 450 mm overall in plain G.I. sheets 22 BG fixed with galvanised iron J or L hooks 8 mm dia. Limpet and bitumen washers complete.

FINISHING

12mm cement plaster 1:4 (1 cement : 4 coarse sand).

15mm cement plaster 1:4 (1 cement : 4 coarse sand).

15 mm cement plaster 1:3(1 cement:3 coarse sand)finished with a floating coat of neat cement.

Coal tarring two coats on new work using 10 sqm. not less than 1.6 litres of coat tar of approved quality for 1st coat 1.2 litres for second coat.

Painting on wall with ( two coats ) of plastic emulsion paint of approved quality in all shades on new work to give an even shade

provoding and applying plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete

Finishing walls weather shield paint of approved quality on new work (three or more coats) to give even shade

Applying ready mixed priming coat pink primer of appd. quality on wood work.

Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of appd. quality in all shades on new work to give an even shade.

MISCELLANEOUS

Providing under layer for plinth protection of 75 mm thick (unconsolidated) of stone aggrt. 40 mm nominal size wall rammed & consolidated & grouted with fine sand i/c finishing the top of concrete smooth.

Providing plinth protection 50 mm thick in cement concrete 1: 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggrt. of 20 mm nominal size) i/c finishing the top surface of concrete smooth.

2nd class brick masonary 15x15cm open surface drain in c.m. 1: 5(1cem : 5 c/sand) i/c earth excavation 10cm bed c.c.1: 5 : 10 1cem : 5 c/sand :10gr.st.aggrt.40mm n/size i/c 12mm thick cement plaster 1: 3 (1cem : 3 c/sand) with a floating coat of neat cement inside & outside as per standard design.

P/F20 mm thick plank as eave board with (a) Uchan/Tolhao wood

Providing and laying cement concrete in foundation and plinth excluding the cost of centering and shuttering in (a)1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

(b)1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size)

P/F C.I. Cover with frame (for manhole and chambers) (a) 600mm x450mm (heavy duty)(38 Kg)

Earth work in excavation in hill cutting including disposal of excavated earth lead upto 50 metres and lift upto 1.5 metres disposed earth to be leveled and neatly dressed.(a)Hard/Dense Soil.

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:(i)White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:(a) White Vitreous China Flat back wash basin size 450x 300 mm with single 15mm C.P. brass pillar tap

Providing and fixing 600 X 20 mm SONA C.P. brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C.P. brass screws (Hook type).

Providing and fixing soap container of glass with C.P. lid and brackets fixed to wooden cleats with C.P. brass screws.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :.(i) Rectangular shape 453x357 mm

Providing and fixing 100 mm H.C.I. Soil,waste & vent pipes.

Providing and fixing 50 mm HCI soil waste and vent pipe.

Providing and fixing 100mm HCI plain bend of required degree.

Providing and fixing 100 x 100 x 100 mm HCI branch of the required degree with access doors, insertion rubber washer 3 mm thick bolts and nuts complete.

Providing and fixing MS holder bat clamps of approved design to 100 mm HCI pipe socket i/c cost of cutting holes and making good the walls etc.

Providing and fixing 100 mm HCI bend of the required degree with access door insertion rubber washers bolts and nuts etc. complete.

Providing and fixing 50 mm HCI terminal guard.

Providing and fixing lead chaulked joints to 100 mm HCI pipes

Providing and fixing C.P. brass bib cock of superior quality.a) 15 mm diameter (Ordinary).

Providing and fixing brass stop cock of superior quality. (a) 25 mm diameter.

Providing and fixing brass full way G.M valve with CI wheel of approved quality.(a) 25 mm diameter

Providing and fixing GI pipes complete with GI fittings i/c trenching and refilling etc. (external work).(a) 25 mm diameter

Providing and fixing G.I. pipes complete with G.I. fittings and clamps i/c cutting and making good the walls etc. (Internal work).(a) 15 mm diameter

Providing and fixing WATER STORAGE TANKS (Sintex) with 400 mm diameter nominal base G.I. overflow tube 25 mm nominal G.I. inlet and 15 mm nominal G.I. outlet tube i/c hoisting a height of 10 m above ground level. (a)1000 litres net capacity storage tanks

IEI WORK

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 FR PVC insulated copper conductor single core cable in presto plast cassing and capping with modular type switch and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc.as reqd.

Group B

Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in surface/recessed PVC conduit etc.as reqd.

(a) 2X2.5mm2+1X2.5mm2 earth wire

P/L 4mm2 twin core pvc ins.(heavy duty) Cu. cond. armoured cable of 1.IKV grade in size not exceedng 25mm2 direct in ground i/c excavation, sand cushioning protective covering and refilling the trench etc.as reqd.

S/F brass batten/angle holder i/c connection etc.as reqd.

S/F 12W LED bulb.

SITC 50W LED 5000K energy saving IP 65 Flood Light luminaries with high power LED as light source Havell's JETACOMPECTOFL50W LED 757LTG complete with connection as rqd. (Havell's)

Installation of exhaust fan upto 450mm sweep in the existing opening i/c making the hole to suit the size of the above fan, making good the damaged, connection testing commissioning etc. as reqd.

S/F 305mm sweep exhaust fan complete with accessories i/c connection etc. as reqd.

S/F (following way) single pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar, hinged front sacrylic cover for the MCCB knobs detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+4 way

S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. (a) Single pole

Supplying & fixing (following rating) double pole 240V isolator in existing MCB DB complete with connection testing & commissioning as reqd. (a) 40 amp

P/F 300x450x60mm(n/size) with permissible variation of plus minus 5mm in size wooden board complete with locking arrangement and painting etc.

Supply & Fixing swaged type steel tubular pole 8 mtr. Long as per 410 SP 14.conforming to IS 2713 (Pt.II) 1980 with bracket in cement concrete 1:3:6 (1:cement:3c/sand:6 gr. st. 40 mm n/size) foundation i/c excavation and refilling etc. as requred.

Supply and drawing of AB Cable of size (3x50 + 1x35) mm2

TORBUNG BANGLA

(E)SH ;- 20 SM Barrack with attached toilet Blocks.

Earth work in excavation in foundation trenches or drains i/c dressing of sides and ramming of bottoms,including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead to 50 m.in Hard dense soil. (a) Lift upto 1.5 m

Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming & watering lead upto 50m and lift upto 1.5m.

Filling in plinth with sandy soil under floors including watering ramming,consolidating and dressing complete with a lead of 50m

CONCRETE WORKS

P/L cement concrete in foundation and plinth excluding the cost of centering and shuttering : - (a) 1:5:10 (1 cem :5 Coarse sand: 10 graded stone aggrt. 40mm nominal size).

STONE WORKS

Polygonal rubble masonary/R.R. masonary (uncoursed/brought to course)/Sq. rubble masonary (uncoursed/brought to courses) with hard stone of approved quality in foundation and plinth in cement mortar 1 : 6 (1 cement : 6 course sand) including levelling with cement concrete 1 : 6 : 12 (1 cement : 6 course sand : 12 gr. st. aggregate 20 mm nominal size).

BRICKS WORKS

2nd class (local first class) brick work in foundation and plinth level in cement mortar 1:4(1 Cem:4C/Sand)

Half brick masonry 2nd class (local first class) in cement mortar 1:4 (1 cement : 4 coarse sand) in superstructure above plinth.

R.C.C. WORKS

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (a)1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement :(a)1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)

Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete.(a) Mild steel and Medium Tensile steel bars.

(b) Thermo-Mechanically Treated bars.

FORM WORKS

Providing form work i/c centering & shuttering so as to give a rough finish strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4m and removal of the same for insitu reinforced concrete to and plain concrete work in. (using 12mm shuttering ply) (a) Foundation footings, bases of columns etc. and mass concrete.

(b) Columns, pillars, posts and struts (square, rectangular or polygon in plan).

(c) Sides & soffits of beams, beam haunchings, cantilevers, girders, bressummers and lintels not exceeding 1m in depth.

(b)Flat surface such as suspended floor,roofs,landing & the like( i) floor etc upto 200mm in thickness

(e)Edges of slab and breaks in floor not exceeding 1m in depth

WOOD WORKS

Providing wood work in frames of doors, windows, c/windows & other frame and fixed in position. (a) local best qlty Leihao wood.

Providing and fixing 38 mm thick panelled and glazed or panelled and glazed shutters for doors, windows, c/windows etc. including bright finished brass hinges with necessary screws - (a) local best qlty Leihao wood.

Providing wood work in frames of false ceiling, partition etc. sawn and put in position (a) Uchan/Tairen wood.

Providing and fixing local best qlty plain lining tongued and grooved and including wooden plug complete with necessary screws & priming coat on unexposed surface (a) 19 mm thick (i) local best qlty Leihao wood.

P/F C.P. Sliding door bolts 300X16 mm with screws & nuts complete.

P/F Al. Tower bolts with screws & nuts complete. (a) 250x10 mm

P/F Al. Handles with screws & nuts complete. (a) 150 mm

Providing & fixing M.S. round or square bars at required spacings in windows frame of window & clerestory window.

ROOFING

C.G.I. sheet 24 B.G. fixed with galvanised iron J or L hooks 8mm dia G.I. limpet and bitumen washer complete, excluding the cost of purlins, rafter and trusses.

Ridges and valleys 610 mm overall in plain G.I. sheets 22 BG fixed with galvanised iron J or L hooks 8 mm dia. Limpet and bitumen washers complete.

Providing and fixing 4mm thick Rhino Brand A.C.Duro Board (Plain sheet) of 610x610 mm ceiling Roofing and Ceiling Item) with wooden beading 62x12mm Leihao wood spaced 61 cm centre to centre maximum on both sides etc complete ( frame work to be paid separately).

Providing and fixing 40 X 6 mm FB wind ties to G.I. sheet roof with hook bolts.

FLOORING

Vitrified tiles 10mm in flooring, treads or steps & landing laid on a bed of 12 mm thick cement mortar 1:3 (1 cement:3 coarse sand) finished with flush pointing in white cement.(i) 60x60 cm size

Vitrified tiles 10mm in skirting riser of steps & dado on 10 mm thick cement mortar 1:3 (1 cement:3 coarse sand) & jointed with white cement slurry.(i) 60x60 cm size

P/F20 mm thick plank as eave board with (a) Uchan/Tolhao wood

TUBULAR TRUSSES/STEEL/ALUMINIUM WINDOWS

Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a coat of approved steel primer red oxide chrome primer conforming to IS 2079, welded and bolted incluiding special shape washer etc. complete. (a) Electric resistant welded tube ( Conforming to IS : 1611 - 1979).

Steel glazed windows and ventilators of standard rolled steel section joints mitred and welded with 15 x 3 mm lugs 10 cm long with steel plugs embedded in cement concrete block 15 x 10 x 10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 stone aggregate 20 mm nominal size) or wooden plugs and screws of rawl plugs and screws or with fixing clips with bolts and nuts as required including providing and fixing of 4 mm thick glass panes with glazing clips complete including applying a priming coat of approved steel primer excluding cost of metal beadings and other fittings except necessary hinges or pivots as required.(i) Ready made steel windows (side hung /top hung)

FINISHING

12mm cement plaster 1:4 (1 cement : 4 coarse sand).

15mm cement plaster 1:4 (1 cement : 4 coarse sand).

15 mm cement plaster 1:3(1 cement:3 coarse sand)finished with a floating coat of neat cement.

provoding and applying plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete

Coal tarring two coats on new work using 10 sqm. not less than 1.6 litres of coat tar of approved quality for 1st coat 1.2 litres for second coat.

Painting on wall with ( two coats ) of plastic emulsion paint of approved quality in all shades on new work to give an even shade

Finishing walls weather shield paint of approved quality on new work (three or more coats) to give even shade

Applying ready mixed priming coat pink primer of appd. quality on wood work.

Applying ready mixed priming coat (genuine red lead of appd. Quality) on steel work.

Painting (two or more coats excluding priming coat) with superior ready mixed paint for steel work of approved quality in all shades on new steel work to give an even shade.

Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of appd. quality in all shades on new work to give an even shade.

Providing 40x3mm flat iron hold fast 40cm long i/c fixing to frames with 10mm dia bolts, nuts and wooden plugs and embedding to cement concrete block 30x10x15cm 1:3:6 (1 cement : 3 coarsesand : 6 stone aggrt. 20mm nominal guage).

STEEL WORKS

Providing & fixing M.S. round holding down or anchor bolts with nuts & washer plates complete.

MISCELLANEOUS

Providing under layer for plinth protection of 75 mm thick (unconsolidated) of stone aggrt. 40 mm nominal size wall rammed & consolidated & grouted with fine sand i/c finishing the top of concrete smooth.

Providing plinth protection 50 mm thick in cement concrete 1: 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggrt. of 20 mm nominal size) i/c finishing the top surface of concrete smooth.

2nd class brick masonary 15x15cm open surface drain in c.m. 1: 5(1cem : 5 c/sand) i/c earth excavation 10cm bed c.c.1: 5 : 10 1cem : 5 c/sand :10gr.st.aggrt.40mm n/size i/c 12mm thick cement plaster 1: 3 (1cem : 3 c/sand) with a floating coat of neat ceme

Providing and laying cement concrete in foundation and plinth excluding the cost of centering and shuttering in (a)1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

(b)1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size)

P/F C.I. Cover with frame (for manhole and chambers) (a) 600mm x450mm (heavy duty)(38 Kg)

Earth work in excavation in hill cutting including disposal of excavated earth lead upto 50 metres and lift upto 1.5 metres disposed earth to be leveled and neatly dressed.(a)Hard/Dense Soil.

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:(i)White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:(a) White Vitreous China Flat back wash basin size 450x 300 mm with single 15mm C.P. brass pillar tap

Providing and fixing 600 X 20 mm SONA C.P. brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C.P. brass screws (Hook type).

Providing and fixing soap container of glass with C.P. lid and brackets fixed to wooden cleats with C.P. brass screws.

Providing and fixing Telephonic shower rose with 12.5 mm or 19 mm inlet.(a) 15 mm diameter. Ordinary

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :.(i) Rectangular shape 453x357 mm

Providing and fixing 100 mm H.C.I. Soil,waste & vent pipes.

Providing and fixing 50 mm HCI soil waste and vent pipe.

Providing and fixing HCI traps with 100 mm inlet and 100 mm outlet of self cleaning design with HCI screwed down of hinged grating with or without vent arm complete i/c cost of cutting and making good the walls and floors.

Providing and fixing 100mm HCI plain bend of required degree.

Providing and fixing 100 x 100 x 100 mm HCI branch of the required degree with access doors, insertion rubber washer 3 mm thick bolts and nuts complete.

Providing and fixing MS holder bat clamps of approved design to 100 mm HCI pipe socket i/c cost of cutting holes and making good the walls etc.

Providing and fixing 100 mm HCI bend of the required degree with access door insertion rubber washers bolts and nuts etc. complete.

Providing and fixing MS holder bat clamps of approved design to 50 mm HCI pipe socket i/c cost of cutting holes and making good the walls etc.

Providing and fixing 50 mm HCI terminal guard.

Providing and fixing 50 mm HCI plain band of required degree.

Providing and fixing lead chaulked joints to 50 mm HCI pipes

Providing and fixing lead chaulked joints to 100 mm HCI pipes

Providing and fixing C.P. brass bib cock of superior quality.a) 15 mm diameter (Ordinary).

Providing and fixing brass stop cock of superior quality. (a) 25 mm diameter.

Providing and fixing brass full way G.M valve with CI wheel of approved quality.(a) 25 mm diameter

Providing and fixing GI pipes complete with GI fittings i/c trenching and refilling etc. (external work).(a) 25 mm diameter

Providing and fixing G.I. pipes complete with G.I. fittings and clamps i/c cutting and making good the walls etc. (Internal work).(a) 15 mm diameter

Providing and fixing WATER STORAGE TANKS (Sintex) with 400 mm diameter nominal base G.I. overflow tube 25 mm nominal G.I. inlet and 15 mm nominal G.I. outlet tube i/c hoisting a height of 10 m above ground level. (a)1000 litres net capacity storage tanks

IEI WORK (20 SM Barrack with attached toilet Blocks.)

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit with piano type switch phenolic laminated sheet suitable size MS-box and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc.as reqd.

Group A

Group B

Group C

Wiring for light point/power plug with 2X4mm2 FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit with 1 No. 4mm2 FR PVC insulated copper conductor single core cable for loop earthing etc.as reqd.

Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in surface/recessed PVC conduit etc.as reqd.

2X1.5mm2+1X1.5mm2 earth wire

2X2.5mm2+1X2.5mm2 earth wire

2X4mm2+1X4mm2 earth wire

Supply and fixing (following modular type switch/socket) on the existing switch box/cover i/c connection etc as reqd.

5/6 amps switch

15/16 amps switch

3 pin 5/6 amps socket outlet

6 pin 15/16 amps socket outlet

P/L 4mm2 twin core pvc ins.(heavy duty) Cu. cond. armoured cable of 1.IKV grade in size not exceedng 25mm2 direct in ground i/c excavation, sand cushioning protective covering and refilling the trench etc.as reqd.

S/F brass batten/angle holder i/c connection etc.as reqd.

SITC surface mounted LED Down Lighter with white powder coated Al. housing with integrated electronic driver 15 W 840 LHEAAGP6IA2W012 complete with connection as rqd. (Havell's)

S/F 12W LED bulb

S/F 48"sweep (1200mm) AC ceiling fan complete with down rod,canopy, 3 (three) blades etc.as reqd. (Make Bajaj/Usha/Crompton/Orient)

S/F stepped type electronic fan regulator on the existing modular plate sewitch box i/c connection but excluding modular plate etc.

S/F fan hook i/c bolt & nuts.

Installation of exhaust fan upto 450mm sweep in the existing opening i/c making the hole to suit the size of the above fan, making good the damaged, connection testing commissioning etc. as reqd.

S/F 305mm sweep exhaust fan complete with accessories i/c connection etc. as reqd.

SITC 50W LED 5000K energy saving IP 65 Flood Light luminaries with high power LED as light source Havell's JETACOMPECTOFL50W LED 757LTG complete with connection as rqd. (Havell's)

P/F 60 amp MCSPN switch unit 240/250v with rewireable fuses i/c drilling holes on the board connection, earthing the body etc.as reqd.

S/F (following way) single pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar, hinged front sacrylic cover for the MCCB knobs detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+6 way single door

S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. (a) Single pole

Supplying & fixing (following rating) double pole 240V isolator in existing MCB DB complete with connection testing & commissioning as reqd. (a) 40 amp

P/F 300x450x60mm(n/size) with permissible variation of plus minus 5mm in size wooden board complete with locking arrangement and painting etc.

Earthing with G.I.earth pipe 4.5mt.long and 40 mm dia. i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.as reqd.

Extra for using salt and charcoal for pipe electrode as reqd.

P/F 4.06mm dia.copper wire on surface or in recess for loop earthing etc.as reqd.

Supply & Fixing swaged type steel tubular pole 8 mtr. Long as per 410 SP 14.conforming to IS 2713 (Pt.II) 1980 with bracket in cement concrete 1:3:6 (1:cement:3c/sand:6 gr. st. 40 mm n/size) foundation i/c excavation and refilling etc. as requred.

Supply and drawing of AB Cable of size (3x50 + 1x35) mm2

(F) SH:- 20000 ltrs Ground Sump with elevated plate form

Earth work in excavation in foundation trenches or drains i/c dressing of sides and ramming of bottoms,including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead to 50 m.in Hard dense soil. (a) Lift upto 1.5 m

Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming & watering lead upto 50m and lift upto 1.5m.

CONCRETE WORK

P/L cement concrete in foundation and plinth excluding the cost of centering and shuttering : - (a) 1: 3 : 6 (1 cem : 3 Coarse sand : 6 graded stone aggrt. 40mm nominal size).

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (a)1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement :(a)1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)

Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete.(a)Thermo-Mechanically Treated bars.

FORM WORK.

Providing form work i/c centering & shuttering so as to give a rough finish strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4m and removal of the same for insitu reinforced concrete to and plain concrete work in. (using 12mm shuttering ply) (a) Foundation footings, bases of columns etc. and mass concrete.

(b) Vertical surface such as walls (any thickness), partition and the like including attached pilasters, buttreese, plinth and the string courses and the like

(c) Columns, pillars, posts and struts (square, rectangular or polygon in plan).

(d) Sides & soffits of beams, beam haunchings, cantilevers, girders, bressummers and lintels not exceeding 1m in depth.

(b) Flat surface such as suspended floor,roofs,landing & the like ( i) floor etc upto 200mm in thickness

(e)Edges of slab and breaks in floor not exceeding 1m in depth

BRICK WORKS

2nd class (local first class) brick work in foundation and plinth level in cement mortar 1:4(1 Cem:4C/Sand)

Half brick masonry 2nd class (local first class) in cement mortar 1:4 (1 cement : 4 coarse sand) in superstructure above plinth.

Steel glazed windows and ventilators of standard rolled steel section joints mitred and welded with 15 x 3 mm lugs 10 cm long with steel plugs embedded in cement concrete block 15 x 10 x 10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 stone aggregate 20 mm nominal size) or wooden plugs and screws of rawl plugs and screws or with fixing clips with bolts and nuts as required including providing and fixing of 4 mm thick glass panes with glazing clips complete including applying a priming coat of approved steel primer excluding cost of metal beadings and other fittings except necessary hinges or pivots as required. (i) Ready made steel windows (side hung /top hung)

Steel welded in built up sections, framed work in cutting, hoisting, fitting in position & priming coat of red lead paint (h) In gratings, framed guard bars, ladder, railling, brackets and similar works

P/F C.I. Cover with frame (for manhole and chambers) (a) 600mm x450mm (heavy duty)(38 Kg)

FINISHING

12mm cement plaster 1:4 (1 cement : 4 coarse sand).

15mm cement plaster 1:4 (1 cement : 4 coarse sand).

15 mm cement plaster 1:3(1 cement:3 coarse sand)finished with a floating coat of neat cement.

Finishing walls with water-proofing cement paint of approvd quality on new work ( three or more coats) to given shade.

Providing and fixing Water Storage Tanks (Sintex) with 400 mm diameter nominal base G.I. overflow tube 25 mm nominal G.I. inlet and 15 mm nominal G.I. outlet tube including hoisting a height of 10 m above ground level. (a) 1000 litres net capacity storage tanks.

Providing and fixing G.I. pipe complete with G.I. fittings and clamps i/c cutting and making good the wall etc.(External wall) ( a) 50mm dia.

Proving & Fixing of Self priming water pump of 1H.P. including necessary fittings of suction and delivery pipe and electricalk complete as directed by the Engineer in charge

(G) SH :- Toilet Block-10 WC for (J)Personal

EARTH WORK

Earth work in excavation in foundation trenches or drains i/c dressing of sides and ramming of bottoms,including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead to 50 m.in Hard dense soil. (a) Lift upto 1.5 m

Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming & watering lead upto 50m and lift upto 1.5m.

Filling in plinth with sandy soil under floors including watering ramming,consolidating and dressing complete with a lead of 50m

CONCRETE WORKS

P/L cement concrete in foundation and plinth excluding the cost of centering and shuttering : - (a) 1:5:10 (1 cem :5 Coarse sand: 10 graded stone aggrt. 40mm nominal size).

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (a)1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement :(a)1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)

Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete.(a) Mild steel and Medium Tensile steel bars.

(b) Thermo-Mechanically Treated bars.

FORM WORKS

Providing form work i/c centering & shuttering so as to give a rough finish strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4m and removal of the same for insitu reinforced concrete to and plain concrete work in. (using 12mm shuttering ply) (a) Foundation footings, bases of columns etc. and mass concrete.

(b) Columns, pillars, posts and struts (square, rectangular or polygon in plan).

(c) Sides & soffits of beams, beam haunchings, cantilevers, girders, bressummers and lintels not exceeding 1m in depth.

(d)Flat surface such as suspended flloor,roofs, landing & the like (i) floor etc upto 200mm in thickness

(e)Edges of slab and breaks in floor not exceeding 1m in depth

STONE WORK

Polygonal rubble masonary/R.R. masonary (uncoursed/brought to course)/Sq. rubble masonary (uncoursed/brought to courses) with hard stone of approved quality in foundation and plinth in cement mortar 1 : 6 (1 cement : 6 course sand) including levelling with cement concrete 1 : 6 : 12 (1 cement : 6 course sand : 12 gr. st. aggregate 20 mm nominal size).

BRICKS WORKS

2nd class (local first class) brick work in foundation and plinth level in cement mortar 1:4(1 Cem:4C/Sand)

Half brick masonry 2nd class (local first class) in cement mortar 1:4 (1 cement : 4 coarse sand) in superstructure above plinth.

WOOD WORKS

Providing wood work in frames of doors, windows, c/windows & other frame and fixed in position. (a) local best qlty Leihao wood.

Providing and fixing 38 mm thick panelled and glazed or panelled and glazed shutters for doors, windows, c/windows etc. including bright finished brass hinges with necessary screws - (a) local best qlty Leihao wood.

Providing 40x3mm flat iron hold fast 40cm long i/c fixing to frames with 10mm dia bolts, nuts and wooden plugs and embedding to cement concrete block 30x10x15cm 1:3:6 (1 cement : 3 coarsesand : 6 stone aggrt. 20mm nominal guage).

Providing wood work in trusses, purlins, rafter, posts, post plate wall plate & the like wrought framed hoisted & fixed in position. (c) Uchan/Tairen/Tolhao/Khangra.

Supplying 40 X 3 X 275 mm FB twisted plate including cost of bolts and nuts.

P/F Al.. Sliding door bolts 300X16 mm with screws & nuts complete.

P/F Al. Tower bolts with screws & nuts complete. (a) 250x10 mm

P/F Al. Handles with screws & nuts complete. (a) 125 mm

Providing and Fixing MS round or square bars required spacing in window & clerestory window.

STEEL WORKS

Providing & fixing M.S. round holding down or anchor bolts with nuts & washer plates complete.

Providing and fixing 40 X 6 mm FB wind ties to G.I. sheet roof with hook bolts.

G.I. sheet gutters 24 B.G. semi-circular150 mm width 450 mm over all i/c fixed with clamps& making connection with rain water pipe complete.

FLOORING

40 mm cement concrete flooring 1:2:4 (1 Cement: 2 coarse sand: 4 stone aggregate 20 mm & down gauge) finished with a floating coat of neat cement.

ROOFING & CEILING

C.G.I. sheet 24 B.G. fixed with galvanised iron J or L hooks 8mm dia G.I. limpet and bitumen washer complete, excluding the cost of purlins, rafter and trusses.

Ridges and valleys 450 mm overall in plain G.I. sheets 22 BG fixed with galvanised iron J or L hooks 8 mm dia. Limpet and bitumen washers complete.

FINISHING

12mm cement plaster 1:4 (1 cement : 4 coarse sand).

15mm cement plaster 1:4 (1 cement : 4 coarse sand).

15 mm cement plaster 1:3(1 cement:3 coarse sand)finished with a floating coat of neat cement.

Coal tarring two coats on new work using 10 sqm. not less than 1.6 litres of coat tar of approved quality for 1st coat 1.2 litres for second coat.

Painting on wall with ( two coats ) of plastic emulsion paint of approved quality in all shades on new work to give an even shade

provoding and applying plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete

Finishing walls weather shield paint of approved quality on new work (three or more coats) to give even shade

Applying ready mixed priming coat pink primer of appd. quality on wood work.

Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of appd. quality in all shades on new work to give an even shade.

MISCELLANEOUS

Providing under layer for plinth protection of 75 mm thick (unconsolidated) of stone aggrt. 40 mm nominal size wall rammed & consolidated & grouted with fine sand i/c finishing the top of concrete smooth.

Providing plinth protection 50 mm thick in cement concrete 1: 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggrt. of 20 mm nominal size) i/c finishing the top surface of concrete smooth.

2nd class brick masonary 15x15cm open surface drain in c.m. 1: 5(1cem : 5 c/sand) i/c earth excavation 10cm bed c.c.1: 5 : 10 1cem : 5 c/sand :10gr.st.aggrt.40mm n/size i/c 12mm thick cement plaster 1: 3 (1cem : 3 c/sand) with a floating coat of neat cement inside & outside as per standard design.

P/F20 mm thick plank as eave board with (a) Uchan/Tolhao wood

Providing and laying cement concrete in foundation and plinth excluding the cost of centering and shuttering in (a)1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

(b)1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size)

P/F C.I. Cover with frame (for manhole and chambers) (a) 600mm x450mm (heavy duty)(38 Kg)

Earth work in excavation in hill cutting including disposal of excavated earth lead upto 50 metres and lift upto 1.5 metres disposed earth to be leveled and neatly dressed.(a)Hard/Dense Soil.

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:(i)White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:(a) White Vitreous China Flat back wash basin size 450x 300 mm with single 15mm C.P. brass pillar tap

Providing and fixing 600 X 20 mm SONA C.P. brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C.P. brass screws (Hook type).

Providing and fixing soap container of glass with C.P. lid and brackets fixed to wooden cleats with C.P. brass screws.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :.(i) Rectangular shape 453x357 mm

Providing and fixing 100 mm H.C.I. Soil,waste & vent pipes.

Providing and fixing 50 mm HCI soil waste and vent pipe.

Providing and fixing 100mm HCI plain bend of required degree.

Providing and fixing 100 x 100 x 100 mm HCI branch of the required degree with access doors, insertion rubber washer 3 mm thick bolts and nuts complete.

Providing and fixing MS holder bat clamps of approved design to 100 mm HCI pipe socket i/c cost of cutting holes and making good the walls etc.

Providing and fixing 100 mm HCI bend of the required degree with access door insertion rubber washers bolts and nuts etc. complete.

Providing and fixing 50 mm HCI terminal guard.

Providing and fixing lead chaulked joints to 100 mm HCI pipes

Providing and fixing C.P. brass bib cock of superior quality.a) 15 mm diameter (Ordinary).

Providing and fixing brass stop cock of superior quality. (a) 25 mm diameter.

Providing and fixing brass full way G.M valve with CI wheel of approved quality.(a) 25 mm diameter

Providing and fixing GI pipes complete with GI fittings i/c trenching and refilling etc. (external work).(a) 25 mm diameter

Providing and fixing G.I. pipes complete with G.I. fittings and clamps i/c cutting and making good the walls etc. (Internal work).(a) 15 mm diameter

Providing and fixing WATER STORAGE TANKS (Sintex) with 400 mm diameter nominal base G.I. overflow tube 25 mm nominal G.I. inlet and 15 mm nominal G.I. outlet tube i/c hoisting a height of 10 m above ground level. (a)1000 litres net capacity storage tanks

IEI WORK

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 FR PVC insulated copper conductor single core cable in presto plast cassing and capping with modular type switch and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc.as reqd.

Group B

Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in surface/recessed PVC conduit etc.as reqd.

(a) 2X2.5mm2+1X2.5mm2 earth wire

P/L 4mm2 twin core pvc ins.(heavy duty) Cu. cond. armoured cable of 1.IKV grade in size not exceedng 25mm2 direct in ground i/c excavation, sand cushioning protective covering and refilling the trench etc.as reqd.

S/F brass batten/angle holder i/c connection etc.as reqd.

S/F 12W LED bulb.

SITC 50W LED 5000K energy saving IP 65 Flood Light luminaries with high power LED as light source Havell's JETACOMPECTOFL50W LED 757LTG complete with connection as rqd. (Havell's)

Installation of exhaust fan upto 450mm sweep in the existing opening i/c making the hole to suit the size of the above fan, making good the damaged, connection testing commissioning etc. as reqd.

S/F 305mm sweep exhaust fan complete with accessories i/c connection etc. as reqd.

S/F (following way) single pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar, hinged front sacrylic cover for the MCCB knobs detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+4 way

S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. (a) Single pole

Supplying & fixing (following rating) double pole 240V isolator in existing MCB DB complete with connection testing & commissioning as reqd. (a) 40 amp

P/F 300x450x60mm(n/size) with permissible variation of plus minus 5mm in size wooden board complete with locking arrangement and painting etc.

Supply & Fixing swaged type steel tubular pole 8 mtr. Long as per 410 SP 14.conforming to IS 2713 (Pt.II) 1980 with bracket in cement concrete 1:3:6 (1:cement:3c/sand:6 gr. st. 40 mm n/size) foundation i/c excavation and refilling etc. as requred.

Supply and drawing of AB Cable of size (3x50 + 1x35) mm2

(H) SH :- Toilet Block-10 Baths for(J) Personal

EARTH WORK

Earth work in excavation in foundation trenches or drains i/c dressing of sides and ramming of bottoms,including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead to 50 m.in Hard dense soil. (a) Lift upto 1.5 m

Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming & watering lead upto 50m and lift upto 1.5m.

Filling in plinth with sandy soil under floors including watering ramming,consolidating and dressing complete with a lead of 50m

CONCRETE WORKS

P/L cement concrete in foundation and plinth excluding the cost of centering and shuttering : - (a) 1:5:10 (1 cem :5 Coarse sand: 10 graded stone aggrt. 40mm nominal size).

R.C.C. WORKS

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (a)1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement :(a)1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)

Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete.(a) Mild steel and Medium Tensile steel bars.

(b) Thermo-Mechanically Treated bars.

FORM WORKS

Providing form work i/c centering & shuttering so as to give a rough finish strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4m and removal of the same for insitu reinforced concrete to and plain concrete work in. (using 12mm shuttering ply) (a) Foundation footings, bases of columns etc. and mass concrete.

(b) Columns, pillars, posts and struts (square, rectangular or polygon in plan).

(c) Sides & soffits of beams, beam haunchings, cantilevers, girders, bressummers and lintels not exceeding 1m in depth.

STONE WORK

Polygonal rubble masonary/R.R. masonary (uncoursed/brought to course)/Sq. rubble masonary (uncoursed/brought to courses) with hard stone of approved quality in foundation and plinth in cement mortar 1 : 6 (1 cement : 6 course sand) including levelling with cement concrete 1 : 6 : 12 (1 cement : 6 course sand : 12 gr. st. aggregate 20 mm nominal size).

BRICKS WORKS

2nd class (local first class) brick work in foundation and plinth level in cement mortar 1:4(1 Cem:4C/Sand)

Half brick masonry 2nd class (local first class) in cement mortar 1:4 (1 cement : 4 coarse sand) in superstructure above plinth.

WOOD WORKS

Providing wood work in frames of doors, windows, c/windows & other frame and fixed in position. (a) local best qlty Leihao wood.

Providing and fixing 38 mm thick panelled and glazed or panelled and glazed shutters for doors, windows, c/windows etc. including bright finished brass hinges with necessary screws - (a) local best qlty Leihao wood.

Providing 40x3mm flat iron hold fast 40cm long i/c fixing to frames with 10mm dia bolts, nuts and wooden plugs and embedding to cement concrete block 30x10x15cm 1:3:6 (1 cement : 3 coarsesand : 6 stone aggrt. 20mm nominal guage).

Providing wood work in trusses, purlins, rafter, posts, post plate wall plate & the like wrought framed hoisted & fixed in position. (c) Uchan/Tairen/Tolhao/Khangra.

Supplying 40 X 3 X 275 mm FB twisted plate including cost of bolts and nuts.

P/F Al.. Sliding door bolts 300X16 mm with screws & nuts complete.

P/F Al. Tower bolts with screws & nuts complete. (a) 250x10 mm

Providing and Fixing MS round or square bars required spacing in window & clerestory window.

P/F Al. Handles with screws & nuts complete. (a) 125 mm

STEEL WORKS

Providing & fixing M.S. round holding down or anchor bolts with nuts & washer plates complete.

Providing and fixing 40 X 6 mm FB wind ties to G.I. sheet roof with hook bolts.

G.I. sheet gutters 24 B.G. semi-circular150 mm width 450 mm over all i/c fixed with clamps& making connection with rain water pipe complete.

FLOORING

40 mm cement concrete flooring 1:2:4 (1 Cement: 2 coarse sand: 4 stone aggregate 20 mm & down gauge) finished with a floating coat of neat cement.

ROOFING & CEILING

C.G.I. sheet 24 B.G. fixed with galvanised iron J or L hooks 8mm dia G.I. limpet and bitumen washer complete, excluding the cost of purlins, rafter and trusses.

Ridges and valleys 450 mm overall in plain G.I. sheets 22 BG fixed with galvanised iron J or L hooks 8 mm dia. Limpet and bitumen washers complete.

FINISHING

12mm cement plaster 1:4 (1 cement : 4 coarse sand).

15mm cement plaster 1:4 (1 cement : 4 coarse sand).

15 mm cement plaster 1:3(1 cement:3 coarse sand)finished with a floating coat of neat cement.

Coal tarring two coats on new work using 10 sqm. not less than 1.6 litres of coat tar of approved quality for 1st coat 1.2 litres for second coat.

Painting on wall with ( two coats ) of plastic emulsion paint of approved quality in all shades on new work to give an even shade

provoding and applying plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete

Finishing walls weather shield paint of approved quality on new work (three or more coats) to give even shade

Applying ready mixed priming coat pink primer of appd. quality on wood work.

Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of appd. quality in all shades on new work to give an even shade.

MISCELLANEOUS

Providing under layer for plinth protection of 75 mm thick (unconsolidated) of stone aggrt. 40 mm nominal size wall rammed & consolidated & grouted with fine sand i/c finishing the top of concrete smooth.

Providing plinth protection 50 mm thick in cement concrete 1: 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggrt. of 20 mm nominal size) i/c finishing the top surface of concrete smooth.

2nd class brick masonary 15x15cm open surface drain in c.m. 1: 5(1cem : 5 c/sand) i/c earth excavation 10cm bed c.c.1: 5 : 10 1cem : 5 c/sand :10gr.st.aggrt.40mm n/size i/c 12mm thick cement plaster 1: 3 (1cem : 3 c/sand) with a floating coat of neat cement inside & outside as per standard design.

P/F20 mm thick plank as eave board with (a) Uchan/Tolhao wood

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:(a) White Vitreous China Flat back wash basin size 450x 300 mm with single 15mm C.P. brass pillar tap

Providing and fixing 600 X 20 mm SONA C.P. brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C.P. brass screws (Hook type).

Providing and fixing soap container of glass with C.P. lid and brackets fixed to wooden cleats with C.P. brass screws.

Providing and fixing Telephonic shower rose with 12.5 mm or 19 mm inlet.(a) 15 mm diameter. Ordinary

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :.(i) Rectangular shape 453x357 mm

Providing and fixing HCI traps with 100 mm inlet and 100 mm outlet of self cleaning design with HCI screwed down of hinged grating with or without vent arm complete i/c cost of cutting and making good the walls and floors.

Providing and fixing 50 mm HCI soil waste and vent pipe.

Providing and fixing MS holder bat clamps of approved design to 50 mm HCI pipe socket i/c cost of cutting holes and making good the walls etc.

Providing and fixing 50 mm HCI plain band of required degree.

Providing and fixing lead chaulked joints to 50 mm HCI pipes

Providing and fixing C.P. brass bib cock of superior quality.a) 15 mm diameter (Ordinary).

Providing and fixing brass stop cock of superior quality. (a) 25 mm diameter.

Providing and fixing brass full way G.M valve with CI wheel of approved quality.(a) 25 mm diameter

Providing and fixing GI pipes complete with GI fittings i/c trenching and refilling etc. (external work).(a) 25 mm diameter

Providing and fixing G.I. pipes complete with G.I. fittings and clamps i/c cutting and making good the walls etc. (Internal work).(a) 15 mm diameter

Providing and fixing WATER STORAGE TANKS (Sintex) with 400 mm diameter nominal base G.I. overflow tube 25 mm nominal G.I. inlet and 15 mm nominal G.I. outlet tube i/c hoisting a height of 10 m above ground level. (a)1000 litres net capacity storage tanks

IEI WORK

SH:- Toilet Block-10 bath for (J) Personal.

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 FR PVC insulated copper conductor single core cable in presto plast cassing and capping with modular type switch and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc.as reqd.

Group B

Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in surface/recessed PVC conduit etc.as reqd.

(a) 2X2.5mm2+1X2.5mm2 earth wire

P/L 4mm2 twin core pvc ins.(heavy duty) Cu. cond. armoured cable of 1.IKV grade in size not exceedng 25mm2 direct in ground i/c excavation, sand cushioning protective covering and refilling the trench etc.as reqd.

S/F brass batten/angle holder i/c connection etc.as reqd.

S/F 12W LED bulb.

SITC 50W LED 5000K energy saving IP 65 Flood Light luminaries with high power LED as light source Havell's JETACOMPECTOFL50W LED 757LTG complete with connection as rqd. (Havell's)

S/F (following way) single pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar, hinged front sacrylic cover for the MCCB knobs detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+4 way

S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. (a) Single pole

Supplying & fixing (following rating) double pole 240V isolator in existing MCB DB complete with connection testing & commissioning as reqd. (a) 40 amp

P/F 300x450x60mm(n/size) with permissible variation of plus minus 5mm in size wooden board complete with locking arrangement and painting etc.

Supply & Fixing swaged type steel tubular pole 8 mtr. Long as per 410 SP 14.conforming to IS 2713 (Pt.II) 1980 with bracket in cement concrete 1:3:6 (1:cement:3c/sand:6 gr. st. 40 mm n/size) foundation i/c excavation and refilling etc. as requred.

Supply and drawing of AB Cable of size (3x50 + 1x35) mm2

(I) SH :- Sentry Tower)-5 Nos'

EARTH WORK

Earth work in excavation in foundation trenches or drains i/c dressing of sides and ramming of bottoms,including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead to 50 m.in Hard dense soil. (a) Lift upto 1.5 m

(b) Lift above 1.5m upto 3.00 m

Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming & watering lead upto 50m and lift upto 1.5m.

Filling in plinth with sandy soil under floors including watering ramming,consolidating and dressing complete with a lead of 50m

CONCRETE WORKS

P/L cement concrete in foundation and plinth excluding the cost of centering and shuttering : - (a) 1:5:10 (1 cem :5 Coarse sand: 10 graded stone aggrt. 40mm nominal size).

STONE WORKS

Polygonal rubble masonary/R.R. masonary (uncoursed/brought to course)/Sq. rubble masonary (uncoursed/brought to courses) with hard stone of approved quality in foundation and plinth in cement mortar 1 : 6 (1 cement : 6 course sand) including levelling with cement concrete 1 : 6 : 12 (1 cement : 6 course sand : 12 gr. st. aggregate 20 mm nominal size).

BRICKS WORKS

2nd class (local first class) brick work in foundation and plinth level in cement mortar 1:4(1 Cem:4C/Sand)

Half brick masonry 2nd class (local first class) in cement mortar 1:4 (1 cement : 4 coarse sand) in superstructure above plinth.

R.C.C. WORKS

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (a)1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement :(a)1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)

Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete.(a) Mild steel and Medium Tensile steel bars.

(b) Thermo-Mechanically Treated bars.

FORM WORKS

Providing form work i/c centering & shuttering so as to give a rough finish strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4m and removal of the same for insitu reinforced concrete to and plain concrete work in. (using 12mm shuttering ply) (a) Foundation footings, bases of columns etc. and mass concrete.

(b) Columns, pillars, posts and struts (square, rectangular or polygon in plan).

(c) Sides & soffits of beams, beam haunchings, cantilevers, girders, bressummers and lintels not exceeding 1m in depth.

(b)Flat surface such as suspended floor,roofs,landing & the like( i) floor etc upto 200mm in thickness

(e)Edges of slab and breaks in floor not exceeding 1m in depth

WOOD WORKS

Providing wood work in trusses, purlins, rafter, posts, post plate wall plate & the like wrought framed hoisted & fixed in position. (c) Uchan/Tairen/Tolhao/Khangra.

Providing and fixing expanded metal 20X60 mm strands 3.25 m wide and 1.6 mm thick for windows etc. Including 60 x20 mm beading of 1st class Uningthou wood.

ROOFING

C.G.I. sheet 24 B.G. fixed with galvanised iron J or L hooks 8mm dia G.I. limpet and bitumen washer complete, excluding the cost of purlins, rafter and trusses.

Ridges and valleys 610 mm overall in plain G.I. sheets 22 BG fixed with galvanised iron J or L hooks 8 mm dia. Limpet and bitumen washers complete.

Providing & fixing M.S. round holding down or anchor bolts with nuts & washer plates complete.

Providing and fixing 40 X 6 mm FB wind ties to G.I. sheet roof with hook bolts.

FLOORING

40 mm cement concrete flooring 1:2:4 (1 Cement: 2 coarse sand:4 stone aggregate 20 mm & down gauge) finished with a floating coat of neat cement.

FINISHING

12mm cement plaster 1:4 (1 cement : 4 coarse sand).

15mm cement plaster 1:4 (1 cement : 4 coarse sand).

15 mm cement plaster 1:3(1 cement:3 coarse sand)finished with a floating coat of neat cement.

Coal tarring two coats on new work using 10 sqm. not less than 1.6 litres of coat tar of approved quality for 1st coat 1.2 litres for second coat.

Finishing walls weather shield paint of approved quality on new work (three or more coats) to give even shade

Applying ready mixed priming coat pink primer of appd. quality on wood work.

Applying ready mixed priming coat (genuine red lead of appd. Quality) on steel work.

Painting (two or more coats excluding priming coat) with superior ready mixed paint for steel work of approved quality in all shades on new steel work to give an even shade.

Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of appd. quality in all shades on new work to give an even shade.

STEEL WORKS

Supplying 40 mm X 3 mm X 275 mm F.B. twisted plate i/c cost of bolts & nuts.

Steel welded in built up sections, framed work in cutting, hoisting, fitting in position & priming coat of red lead paint (h) In gratings, framed guard bars, ladder, railling, brackets and similar works

P/F 1 mm thick M.S. sheet garrage doors with frame of 40 X 40 X 6 mm, angle iron 3.15 mm M.S. gusset plate at the junction of corners with handles, stoppers of locking arrangement etc. i/c applying a priming coat of red lead paint. (a) Using M.S. angles 40 x 40 x 6mm for diagonal braces.

Providing & fixing 20mm lank as eave board with:- Tolhao/Uchan wood.

SH:- Sentry Tower - 5 nos.

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 FR PVC insulated copper conductor single core cable in presto plast cassing and capping with modular type switch and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc.as reqd.

Group B

Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in surface/recessed PVC conduit etc.as reqd.

(a) 2X2.5mm2+1X2.5mm2 earth wire

P/L 4mm2 twin core pvc ins.(heavy duty) Cu. cond. armoured cable of 1.IKV grade in size not exceedng 25mm2 direct in ground i/c excavation, sand cushioning protective covering and refilling the trench etc.as reqd.

S/F brass batten/angle holder i/c connection etc.as reqd.

S/F 12W LED bulb.

SITC 50W LED 5000K energy saving IP 65 Flood Light luminaries with high power LED as light source Havell's JETACOMPECTOFL50W LED 757LTG complete with connection as rqd. (Havell's)

S/F (following way) single pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar, hinged front sacrylic cover for the MCCB knobs detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+4 way

S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. (a) Single pole

Supplying & fixing (following rating) double pole 240V isolator in existing MCB DB complete with connection testing & commissioning as reqd. (a) 40 amp

P/F 300x450x60mm(n/size) with permissible variation of plus minus 5mm in size wooden board complete with locking arrangement and painting etc.

Supply & Fixing swaged type steel tubular pole 8 mtr. Long as per 410 SP 14.conforming to IS 2713 (Pt.II) 1980 with bracket in cement concrete 1:3:6 (1:cement:3c/sand:6 gr. st. 40 mm n/size) foundation i/c excavation and refilling etc. as requred.

Supply and drawing of AB Cable of size (3x50 + 1x35) mm2

(J) SH :- compound wall Fencing for a length of 272.00 Rm with Steel Gate 2(two) no.

(A)SH:- FENCING

DEMOLITION

Demolition of brick work above G.L. Upto floor two level including stacking of serviceable materials and disposal of unserviceable materials within 50 m lead.

Demolition above G.L. Upto floor two level including disposal of unserviceable materials with 50 m lead (a) Unreinforced cement concrete upto 15 cm thickness.

EARTH WORK

Earth work in excavation in foundation trenches or drains i/c dressing of sides and ramming of bottoms,including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead to 50 m.in Hard dense soil. (a) Lift upto 1.5 m

Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming & watering lead upto 50m and lift upto 1.5m.

CONCRETE WORK

P/L cement concrete in foundation and plinth excluding the cost of centering and shuttering : - (a) 1:5:10 (1 cem :5 Coarse sand: 10 graded stone aggrt. 40mm nominal size).

RCC WORK

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (a)1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement :(a)1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)

Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete.(a) Mild steel and Medium Tensile steel bars.

(b) Thermo-Mechanically Treated bars.

FORM WORK

Providing form work i/c centering & shuttering so as to give a rough finish strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4m and removal of the same for insitu reinforced concrete to and plain concrete work in.(a) Foundation footings, bases of columns etc. and mass concrete.

(b) Columns, pillars, posts and struts (square, rectangular or polygon in plan).

BRICK WORK

Half brick masonry 2nd class (local first class) in cement mortar 1:4 (1 cement : 4 coarse sand) in superstructure above plinth.

STONE WORK

Polygonal rubble masonary/R.R. masonary (uncoursed/brought to course)/Sq. rubble masonary (uncoursed/brought to courses) with hard stone of approved quality in foundation and plinth in cement mortar 1 : 6 (1 cement : 6 course sand) including levelling with cement concrete 1 : 6 : 12 (1 cement : 6 course sand : 12 gr. st. aggregate 20 mm nominal size).

FINISHING WORK

12mm cement plaster 1:4 (1 cement : 4 coarse sand).

15mm cement plaster 1:4 (1 cement : 4 coarse sand).

Finishing walls with water-proofing cement paint of approvd quality on new work ( three or more coats) to given shade.

FENCING WORK

75 cm, high fencing with angle iron post 50 X 50 X 6 mm of 1.24 m long placed at every 2.44 m apart embeded in R.C.C. columns and every 1st, 5th and corner posts to be struted providing with 6 (six) horizontal lines and two diagonals of G.I. barbed wire ( 0.164 kg/m.) between two posts filled and fixed with G.I. staples etc. complete.

(B) SH:- STEEL GATE - 2 nos

EARTH WORK

Earth work in excavation in foundation trenches or drains i/c dressing of sides and ramming of bottoms,including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead to 50 m.in Hard dense soil. (a) Lift upto 1.5 m

Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming & watering lead upto 50m and lift upto 1.5m.

CONCRETE WORK

P/L cement concrete in foundation and plinth excluding the cost of centering and shuttering : - (a) 1:5:10 (1 cem :5 Coarse sand: 10 graded stone aggrt. 40mm nominal size).

R.C.C WORKS

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (a)1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement :(a)1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)

Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete.(a) Mild steel and Medium Tensile steel bars.

(b) Thermo-Mechanically Treated bars.

FORMWORK

Providing form work i/c centering & shuttering so as to give a rough finish strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4m and removal of the same for insitu reinforced concrete to and plain concrete work in.(a) Foundation footings, bases of columns etc. and mass concrete.

(b) Columns, pillars, posts and struts (square, rectangular or polygon in plan).

BRICK MASONARY WORK

2nd class (Local 1st class) brick work in square or rectangular pillar in cement mortar 1 : 4 (1 cement : 4 course sand).

STEEL WORKS

Providing and fixing steel gate partly grills and partly M.S. sheet 3.16 mm thick with M.S. angle frame of 65 X 65 X 6 mm including handles, hold fasts, locking arrangment and applying a priming coat of red lead paint ( as per standard design),

FINISHING

Flushed or ruled pointing on brick work with cement mortar 1 : 3 ( 1 cement : 3 fine sand).

Painting (two or more coats excluding priming coat) with superior ready mixed paint for steel work of approved quality in all shades on new steel work to give an even shade.

Irom Khogen Singh

Andy Pamei