ADDN/ ALTN TO BLDG NO N-160 OTM ACCN AND PROVN OF ONE BATHROOM ALONGWITH ELECTRIC FACILITY AT 196 MED REGT AND ADDN/ ALTN TO TOILET BLOCK IN BLDG NO P-194 P-198 P-179 AND P-168 AT 5/11 GR UNDER UNDER AGE B/R-II (S) OF GE (SOUTH) DELHI CANTT-10

Amount

B/R Items Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

M&L for light shade ceramic tiles 10mm thick (square/rectangular) polished area of each tile not exc 0.36 sqm, as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed by Engineer-in-Charge.

M&L for light shade ceramic tiles 10mm thick (square/rectangular) polished area of each tile not exc 0.36 sqm, as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed by Engineer-in-Charge.

M&L for screed bed or bedding layer 15 mm thick in CM 1:6 for laying floor finishes i.e. tiles etc complete all as specified and directed by Engineer-in-Charge.

M&L for backing coat/plaster 10 mm thick on fair faces of brick work or concrete surface in CM 1:4 surfaces to receive tiles complete all as specified and directed by Engineer-in-Charge.

Taking down (Door) chowkats or frames with shutters (without taking of shutters from the frames) not exceeding 1.5 Sqm each complete all as specified and directed by Engineer-in-Charge.

S&F for Pressed steel frames of size 165mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed by Engineer-in-Charge.

S&F for Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed by Engineer-in-Charge.

S&F 35 mm thick Factory made 2nd class hardwood plain,framed paneled shutters(any numbe of panels) with lock rail and panel of 9mm BWP commercial ply with commercial veneering on both faces size of rail and stile as per IS-1003(part) Kiln seasoned and chemically pressure treated complete all as specified and directed by Engineer-in-Charge.

S&F 35 mm thick factory made 2nd class Hard wood glazed and Skelton shutters (three panels) open rebated and prepared to receive glass/gauge etc divided into squares edges of framing Plain, chamfered or rounded mitered and rebated sash bar any number with cut or mitered beads for securing glass/gauge etc Size of members of shutters as specified in SSR Part-1, (2009) clause 8.24 (a) complete all as specified and directed by Engineer-in-Charge.

S&F for Stainless steel butt hinge 100mm size ISI marked complete all as specified and directed by Engineer-in-Charge.

S&F aluminium anodized 200mm long barrel tower bolt of extruded section ,ISI marked complete all as specified and directed by Engineer-in-Charge.

S&F 100mm long extruded aluminium alloy handle, fabricated type ISI marked complete all as specified and directed by Engineer-in-Charge.

S&F 150mm size extruded aluminium handle ISI marked fabricated type anodised complete all as specified and directed by Engineer-in-Charge.

S&F 250mm long aluminium alloy anodised sliding door bolts, with hasp and staple (bolt type) fixing clips of sheet cast or extruded section , fixing bolt and sliding bolt of extruded section and fixed complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cms width or girth and apply two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-Charge.

M&L for preparing new steel surfaces of any descreption not otherwise described over 10cm width or girth and applying two coat of synthetic enamal paint over a coat of red oxide primer, complete all as specified and directed by Engineer-in-Charge.

M&L for preparing old steel surfaces of any descreption not otherwise described over 10cm width or girth and applying one coat of synthetic enamal paint complete all as specified and directed by Engineer-in-Charge.

Dismantling boarding any description, fixed in any position with nails complete all as specified and directed by Engineer-in-Charge.

Anodized aluminum snap grid frame work for false ceiling, size of grid 605mmx605mm, runners of size 15x32mm with hangers of 6mm dia GI (up to 1200mm length) adjusting level, fixed to roof by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long including mineral fiber ceiling boards, moisture resistant of size 610x610x12mm inserted to GI/Aluminum frame work with screws, complete all as specified and directed by Engr-in-Charge. Make: Everest, Armstrong or equivalent as approved.

Hacking out old brocken glass of (any thickness, size, quality or description) from aluminium/ wooden frame beadings etc, complete all as specified and directed by Engineer-in-Charge.

S&F 3mm thick glass sheet ordinary quality frosted on one side, n exc 0.5Sqm in each pane,fixed to aluminium/MS windows, complete all as specified and directed by Engineer-in-Charge.

Taking down cement or cement lime plaster, any description, on brick or concrete or stone walls surface, etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed by Engineer-in-Charge.

M&L for 15mm thick rendering in CM 1:6 of brick/concrete surface finished fair even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for 15mm thick rendering in CM 1:4 of brick/concrete surface finished fair even and smooth without using extra cement with using 2% WPC, complete all as specified and directed by Engineer-in-Charge. Note:- WPC shall be measured and paid sepreately.

M&L for preparation of newly plastered or unplastered surfaces of wall and applying 3 mm thick wall care putty on whole surface including grinding with sand paper and levelling of surface and applying two coats of oil bound distemper , white or tinted over existing prepared putty based surface, complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of newly plastered surface of wall and applying two coats of cement base paint, complete all as specified and directed by Engineer-in-Charge.

M&L for complete removal of existing treatment from internal surfaces of wall electrically opreted grinder, washing and filling of holes with filler material and applying 3 mm mm thick wall care putty on whole surface including grinding with sand paper and levelling of surface and than applying two coats of oil bound distemper on white or tinted over existing prepared putty based surface, complete all as specified and directed by Engineer-in-Charge.

M&L for complete removal of existing treatment from external surfaces of wall electrically opreted grinder, thereafter filling of holes and cracks with filler material and than applying two coats of cement based paint complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete (unreinforced) in ground floors and paving n.exc 15cm thickness (above or below ground level) complete all as specified and directed by Engineer-in-Charge.

M&L for 75 mm thick cement concrete type C-2, 1:3:6 (40 mm graded aggregate) as in plinth protection finished even & smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for 25 mm thick plain cement concrete type B1, 1:2:4 (20 mm graded stone aggregate) as in sub base/ floor etc, complete all as specified and directed by Engineer-in-Charge.

M&L for 100 mm thick cement concrete type D-2, 1:4:8 (40mm graded stone aggregate) as in sub base complete all as specified and directed by Engineer-in-charge.

M&L for cement concrete chequered tiles with cement and no pigment 20cm x 20cm x 25mm thick, machine pressed, set, jointed and pointed in neat cement slurry laid over 20mm thick screed bed in cement mortar 1:6 in floor and cut & polished complete all as specified and directed by Engineer-in-Charge.

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in any type of soil, complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth for foundation etc for manholes,septic tanks, wells or laying of pipes etc not exceeding 10 sqm on plan and not exceeding 1.5m in depth and getting out in any type of soil, complete all as specified and directed by Engineer-in-Charge.

Returning, filling in approved soft/loose soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick, complete all as specified and directed by Engineer-in-Charge.

Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and directed by Engineer-in-Charge.

M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundations filling and mass concrete, complete all as specified and directed by Engineer-in-Charge.

M&L for brick work with sub class 'B' bricks strainght or curved on plan not exceeding 6m mean radius built in cement mortor 1:6 complete all as specified and directed by Engineer-in-Charge.

M&L for brick work with sub class 'B' bricks strainght or curved on plan to any radius in half thick wall built in cement mortor 1:4 complete all as specified and directed by Engineer-in-Charge.

M&L for damp proof course 40mm thick to horizontal or vertical surfaces in Cement Concrete 1:2:4 type B-0 including neccessary formwork and with WPC as per manufacturer instruction, complete all as specified and directed by Engineer-in-Charge. Note-: WPC shall be measured and paid for seperately

Supply only Integral water proofing compound complete all as specified and directed by Engineer-in-Charge.

M&L for Reinforced Cement Concrete (nominal mix) type B1 1:2:4 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engineer-in-Charge.

M&L for applying a coat of blown type bitumen at the rate of 1.50 kg per square meter and binding with clean dray sand @0.05 cum per Sqm complete all specified and directed by Engineer-in-Charge.

M&L for polythene film, 50 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 Kg per Sqm complete all as specified and directed by Engineer-in-Charge.

M&L for Reinforced Cement Concrete (Nominal mix) type B1 1:2:4 (using 20mm graded aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed by Engineer-in-Charge.

M&L for cement concrete 1:2:4 type B1 (20mm graded aggregate) in lintels upto 1.5m clear span, cills, steps;seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates and the like including weathering , slightly rounded or chamfered angle and throughting complete all as specified and directed by Engineer-in-Charge.

S&F TMT bar 10 mm dia and over, cut to length, bent to shape required including cranking, hooking ends and binding with and including mild steel (annealed) wire not less than 0.9 mm dia or securing with clips etc, complete all as specified and directed by Engineer-in-Charge.

S&F TMT bar 8 mm dia, cut to length, bent to shape required including cranking, hooking ends and binding with and including mild steel (annealed) wire not less than 0.9 mm dia or securing with clips etc, complete all as specified and directed by Engineer-in-Charge.

M&L for mild steel TMT bars 5 mm dia and over upto including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge.

M&L for from work to soffits of suspended slabs such as roof slabs, floor slabs, landing & similar work not exceeding 200mm thick (Horizontal or sloping) for rough finished surfaces, complete all as specified and directed by Engineer-in-Charge.

Use & Waste for formwork to edges of concrete flats,treads breaks in floor ,window cill, concrete railings ,openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in wall ,horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide, complete all as specified and directed by Engineer-in-Charge.

M&L for 10 mm thick Cement Plaster in cement mortar 1: 3 on concrete surfaces of ceiling,chajja,etc finished fair and even, complete all as specified and directed by Engineer-in-Charge.

M&L for preparaing newly plastered surfaces on Ceiling and applying three coats of white wash, complete all as specified and directed by Engineer-in-Charge.

M&L for applying two coats of cement based paint, on white or tinted over newly prepared surface complete all as specified and directed by Engineer-in-Charge.

M&L for cement concrete 40 mm thick Type B-1, 1:2:4 (20mm graded aggregate) as in floor surface finished even and fair, complete all as specified and directed by Engineer-in-Charge.

M&L for Coloured Non Skid ceramic tiles, joint free 7 to 8 mm thick (square/ rectagular) area of each tile exceeding 0.06 sq m but not exceeding 0.11 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cement mortor 1:6, complete all as specified and directed by Engineer-in-Charge.

M&L for Coloured Glazed ceramic tiles size 450 x 350 x7 mm on vertical surfaces such as skirtings, dados and riser to steps etc over 10mm thick rendring in cement mortor 1:4, complete all as specified and directed by Engineer-in-Charge.

M&L for Hardcore of broken stone or boulders gauge n exc. 63 mm, deposited, spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface, complete all as specified and directed by Engineer-in-Charge.

S&F 15mm dia GI tubing medium grade galvanised with all fittings such as bend, elbows, tee and fixed complete to walls and ceiling or laid in floors etc, complete all as specified and directed by Engineer-in-Charge.

All same as per item No. 61 above but 20mm dia comlete all as specified and directed by Engineer-in-Charge.

S&F 500 ltrs capacity rotational molded polyethylene water storage tanks three layer (cylindrical vertical with closed top) hoisted and fixed in position etc complete all as specified and directed by Engineer-in-Charge.

S&F 15mm ball brass valve high pressure with polythene float and fly nut ,screwed for iron pipe complete all as specified and directed by Engineer-in-Charge.

S&F 15mm dia gun metal glove or gate valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed by Engineer-in-Charge.

S&F 75mm dia Nahni trap with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) etc complete all as specified and directed by Engineer-in-Charge.

S&F cast iron 100 mm dia bore soil waste and vent pipe in any length with or without ears with cement joint laid in trenches or in floors/ wall complete all as specified and directed by Engineer-in-Charge.

All same as per item No. 67 above but 75mm dia comlete all as specified and directed by Engineer-in-Charge.

S&F 100 mm dia cast iron S traps complete all as specified and directed by Engineer-in-Charge.

S&F 100 mm dia CI bends ( any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed by Engineer-in-Charge.

All same as per Ser item No. 70 above but 75mm dia complete all as specified and directed by Engineer-in-Charge.

S&F in repairs pillar taps, cast copper alloy, with capstan heads, chromium plated, fency type, screwed down high pressure, with or without lettered (Hot or Cold) with long screwed for 15mm dia iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.

S&F CP grating 100mm dia with or without hole complete all as specified and directed by Engineer-in-Charge.

S&F soap dish ISI marked fixed to plugs with chrominium plated brass screws complete all as specified and directed by Engineer-in-Charge.

S&F tubular towel rail, 20mm dia, ‘D’ type 60cm long between flanges of brass CP complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 15mm bore Bib tap cast copper alloy fancy type chromium plated with crutch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 15 mm bore Angle valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe etc, complete all as specified and directed by Engineer-in-Charge.

S&F viterous china wash down water closet pan (Pedestal pattern) white incl 'P' or 'S' trap and making good the disturbed surface to match with the existing complete all as specified and directed by Engineer-in-Charge.

S&F vitrous china wash hand basin white, flat back size 550x400mm, including necessary waste pipe and couping, bracket and cutting for and pinning in ends of brackets complete all as specified and directed by Engineer-in-Charge.

S&F 32mm dia PVC waste coupling for wash hand basin, complete all as specified and directed by Engineer-in-charge.

S&F in repairs of plastic WC seat cover white/ off white closed pattern with flat bottom end cover and mild steel CP hinging device, complete all as specified and directed by Engineer-in-Charge.

S&F vitreous china urinal bowl type,flat back, size of 465x355x265 mm white with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 10 ltr capacity PVC valave less, syphonic action type, flushing cisten, low level,white, with inlet, ball valve, float and handle including brackets and flush pipe for indian WC etc complete all as specified and directed by Engineer-in-Charge.

S&F PVC connection 15mm dia 450 mm long including nuts & washes complete all as specified and directed by Engineer-in-Charge.

S&F Solid PVC door frame (Factory made) of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed by Engineer-in-Charge.

S&F Solid panel PVC door shutter (Factory made) 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded prelam PVC sheet having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam PVC sheets for top rail, lock rail, bottom rail on either side & as gap insert for top rail & bottom rail, panelling of Prelam PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement and provision of partially louvred frames, complete all as specified and directed by Engineer-in-Charge.

S&F steel ventilator with top hung shutter, including steel hinges, steel peg stay complete all as specified and directed by Engineer-in-Charge.

S&F in repairs CP brass shower rose size 125mm fixed to 15mm bore pipe complete all as specified and directed by Engineer-in-Charge.

M&L for joint free glazed ceramic coloured tiles in vertical surface 450x300x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, complete all as specified and directed by Engineer-in-Charge.

Taking up or down 15mm bore GI steel tubing and connections including removal to store, complete all as specified and directed by Engineer-in-Charge.

Taking up or down 20mm bore GI steel tubing and connections including removal to store, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs viterous china squatting pan 'ORISSA Pattern long pan size 580x440mm white with integral foot rests 'P' or 'S' Trap front or back inlet (excluding flushing cistern & flush pipe but including nahani/floor trap), complete all as specified and directed by Engineer-in-Charge.

S&F in repairs, PVC waste pipe 32 mm bore, 65cm long plain/ corrugated including suitable adopter, complete all as specified and directed by Engineer-in-Charge.

S&F in repair 15 mm bore angle stop valves, cast copper alloy , chromium palted, screwed down high pressure with crutch and butterfly handles , screwed with iron pipes or for union, complete all as specified and directed by Engineer-in-Charge.

S&F in repair Concealed stop cock,15 mm bore, chromium plated ,with long shank and cup, fancy type, complete all as specified and directed by Engineer-in-Charge.

M&L for preparing of new plastered or unplastered surfaces of wall and applying two coats of colour wash, complete all as specified and directed by Engineer-in-Charge.

M&L for preparing of old plastered or unplastered surfaces of ceiling and applying one coats of White wash, complete all as specified and directed by Engineer-in-Charge.

M&L for preparing of old plastered or unplastered surfaces of wall and applying two coats of colour wash, complete all as specified and directed by Engineer-in-Charge.

Dismantling water tanks of capacity exceeding 500 litres but not exceeding 1000 litres, complete all as specified and directed by engineer-in-charge.

S&F 1000 ltr capacity rotational moulded polyethylene water storage tanks three layer (cylindrical vertical with closed top) hoisted and fixed in position, complete all as specified and directed by Engineer-in-Charge.

S&F Ball brass valves, high pressure, with of PTMT with epoxy coated aluminium rod & high desity plastic ball ascrewed for iron pipe of 20mm bore minimum weight 210 gram and fixed, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs brass chromium plated health faucet alongwith 1.00 to 1.50 meter good quality SS flexible connection pipe suitable for 15mm bore pipe, complete all as specified and directed by Engineer-in-Charge.

S&F in repair stainless steel wire cloth, 0.63mm nominal dia or wire and sqm average width or aperature 1.40mm, fixed with tinned tacks or galvanised wire staples to doors/steel windows, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs grating doom 125mm dia with waste hole of PTMT (minimum weight 40 gms) etc complete all as specified and directed by Engineer-in-Charge.

M&L for cement concrete 1:2:4, type B1, (using 20 mm graded stone aggregates) as in cover slab (for manholes) etc including provision of necessary formwork, complete all as specified and directed by Engineer-in-Charge. Note : Reinforcement shall be measured and paid seperately.

S&F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed by Engineer-in-Charge.

M&L for cement concrete bed (1:4:8) type D-2 using 40 mm graded stone aggregate as in bedding to drain pipe laid to falls in trenches in any depth including packing under and haunching against the side of the pipe for 150 mm bore pipes with concrete after the pipes are laid and tested, complete all as specified and directed by Engineer-in-Charge.

S&F SGSW drain pipes 150mm dia laid in trenches and jointed in CM (1:3) complete all as specified and directed by Engr-in-Charge.

Taking up or down 25mm bore GI steel tubing and connections including removal to store, complete all as specified and directed by Engineer-in-Charge.

Cutting chases, pinning in, in brick walls, making good to facings where required and pointing in cement mortar1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed by Engr-in-Charge.

S&F 20mm dia gun metal glove or gate valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed by Engineer-in-Charge.

Demolition of brick work / stone masonary built in cement mortar including all quoins, arches, pillar etc (for portions ordered to be dismantled) including ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engineer-in-Charge.

S&F Vitreous china urinal partition white of size 310x770 mm complete all as specified and directed by Engineer-in-Charge.

S&F counter sunk vitreous china wash hand basin of size 550x400x140mm , ivory, including waste fitting complete all as specified and directed by Engineer-in-Charge.

M&L for 20mm thick Granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engineer-in-Charge.

S&F in repair 15 mm stop valves (concealed type), cast copper alloy , chromium palted, fancy type screwed down high pressure with crutch and butter fly handles , screwed with iron pipes or for union complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Cast iron floor/Nahani trap with grating including jointing to waste pipe in run lead, dia of outlet 100mm in cement concrete type B1 (1:2:4) complete all as specified and directed by Engineer-in-Charge.

Taking down rain water pipe (any size) or pattern incl all fittings, head shoes, bends swan necks etc incl cleaning or re-fixing or removal to store(measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed by Engineer-in-Charge.

S&F PVC (SWR) pipes, 110mm bore single socket in any length with rubber ring joints fixed to walls, complete all as specified and directed by Engineer-in-Charge.

PVC(SWR) bends/Tee any radius, 110mm bore complete all as specified and directed by Engineer-in-Charge.

Taking down chowkats frame with shutters (without taking off shutter from the frame) exceeding 1.50 Sqm but not exc 4 Sqm each complete all as specified and directed by Engineer-in-Charge.

S&F aluminium anodized 150mm long barrel tower bolt of extruded section ,ISI marked complete all as specified and directed by Engineer-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engineer-in-Charge.

S&F powder coated anodised aluminium as in frame & shutter of door, window, ventilators and shutter etc. with one or more rebates including jioning cleat for fixing etc. fixed type/louvered/sliding window or ventilators without sash bar, aluminium including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. with complete arrangement for securing glass or wire cloth complete all as specified and directed by Engineer-in-Charge.

S&F 4 mm thick ordinary quality glass, frosted on one side, in square n. exc. 0.5 Sqm each pane, fixed with aluminium beading in aluminium door/window/ventilator etc complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 5mm thick in cement mortar 1: 3 on concrete surfaces of ceiling,chajja,etc finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for preparaing newly plastered surfaces on wall and applying three coats of white wash, complete all as specified and directed by Engineer-in-Charge.

S&F 40 mm thick insulated PVC Wall Lining consisting of PVC Insulated Panels having expanded polystyrene (EPS) stuck to 2mm thick single side prelam PVC sheet duly fitted into the wall as per specifications and drawing complete all as specified and directed by Engineer-in-Charge.

S&F 5mm thick prelam PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site complete all as specified and directed by Engineer-in-Charge.

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade laid over 50mm laid sand cusion and joints grouted in Cement Mortar 1:4 finished smooth complete all as specified and directed by Engineer-in-Charge.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter for rough finished surface of concrete, complete all as specified and directed by Engineer-in-charge.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions of square, rectangular or polygonal shape for fair finished surface of concrete, complete all as specified and directed by Engineer-in-charge.

M&L for rotational moulded polythylene water storage tanks 3000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR-I including brass valve high pressure with polythne float and fly nut complete, screwd for iron pipe or brass ferrule size 25 mm bore, complete all as specified and directed by Engineer-in-charge.

S&F GI nipple suitable for 15mm dia HDPE water tank minimum weight 15mm, 38grm/20mm, 45grm, complete all as specified and directed by Engineer-in-charge.

S&F steel works in tubular trusses including special shaped washer etc complete using ERW or induction but welded tubes confirming to IS 1161-1979grade st-240 complete all as specified and directed by Engineer-in-charge.

S&F flat iron as in wind ties for roof including securing bolts including all necessary drilling, bolting or riveting, etc. conforming to Fe 410-0 or Fe 310-0, complete all as specified and directed by Engineer-in-charge.

S&F machine pressed Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of and colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with steel J-bolt/ hook and nut including washer and drilling to fix the J bolt, including dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings, complete all as specified and directed by Engineer-in-charge.

S&F of pre painted galvatume Zinc Aluminium Colour Coated (PZAC) based plain sheet, high tensile strength 550mpa, 0.5 mm thick as in ridge of roof including fixed with self tapping screws as specified etc, complete all as specified and directed by Engineer-in-charge.

M&L 100mm thick cement concrete M-20 (noimnal mix) type B1 1:2:4 (using 20mm graded stone aggregate) in Floors standing finishing surface even & smooth without using extra cement, complete all as specified and directed by Engineer-in-charge.

Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound, Grade ‘B’, complete all as specified and directed by Engineer-in-charge.

S&F 2mm thick free foam rigid PVC SHEETS made out of PVC Resin (suspension grade) blended with suitable chemicals and additives of minimum density 700 kg/cum complete all as specified and directed by Engineer-in-charge.

S&F framed work such as grills, gratings, etc, with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balustes, walk ways, railings, framework of watertanks and similar work confirming to Fe 290, Gde-E-165 complete all as specified and directed by Engineer-in-charge.

E/M Items Internal Taking down carefully the old U/S Aluminium / Copper point wiring (light, fan, socket or power) including fitting and fixtures (switch, socket, bell push, lamp holder, electric bell, ceiling rose, fan regulator) and making good disturbed surfaces of walls including necessary touch up with the adjoining surface of disturbed area ie with OBD/colour wash/white wash as the existing finish complete all as specified and directed by Engineer-in-charge.

M&L point wiring complete, with stranded copper conductor 1.5 Sqmm nominal area PVC insulated 1100 volts grade FRLS electrical cable in and including concealed PVC medium grade conduit and sunk in pressed steel terminal boxes of required size factory made and factory painted with stove enameled black paint with top cover 3 mm thick plastic/laminated sheet of required colour with screwed and cup washer with all accessories including 1.5sqmm stranded copper conductor PVC sheathed cable earth wire to common earth and connected to earth dolly complete all as specified and directed by Engineer-in-Charge for following :-

One light/ fan/ bell point controlled by one one-way switch

All as per above Ser item No. 145 but here-in-before one three pin socket outlet 5/6 Amp independent board complete all as specified and directed by Engineer-in-Charge.

All as per item No 145 but here-in-before 5 Amp socket outlet on same board.

One 3 pin socket outlet, 15 Amps on independent board with cable 4.0 Sqmm for main current and 4.0 sqmm as earth wire as power point.

All as Item No 145 but here-in-before for one socket outlet 5/15 Amps on Independent board with cables 2.5 sqmm size for phase and neutral and 2.5 Sqmm for earthing with through concealed PVC conduit Note:- The rates are inclusive of cutting/ chasing and making good to disturbed surface with CM 1:3 and same surface finished with the adjoining surface of disturbed area i.e with OBD/colour wash/white wash and wall putty where ever required.

S&F socket outlet 2-in-1, 5/6 Amps flush mounted 5 pin multi purpose complete all as specified and directed by Engineer-in-Charge.

S&F switch piano flush type 15/16 Amps SP one way complete all as specified and directed by Engineer-in-Charge.

S&F universal socket outlet two in one (multipurpose) 5pin 6/16 Amps flush mounted type complete all as specified and directed by Engineer-in-Charge.

S&F ceiling rose surface Bakelite 65x25 mm two to three terminals complete all as specified and directed by Engineer-in-Charge.

S&F surface mounting Round/ Square shaped LED downlighter 12 Watt LED 6000K/6500K any type complete with including new fliexble wire as required on site including taking down of old unsv existing ceiling light fitting any type complete all as specified and directed by Engineer-in-Charge. Make:- Halonex HLDLS-R12-CW or equivalent in Bajaj/CG/Havells/C&S

S&F wall mounted LED Integrated Batten T5, 20 Watt, 4 Ft White, indoor decorative PVC extruded T5 LED battern-integrated type in replacement of old unsv existing 36/40 watt FTL fittings any type complete all as specified and directed by Engineer-in-Charge. Make : Halonix Cat Part No. HLB-07-20-CW-IP or its equivalent as Bajaj/CG/Havells.

S&F wall mounted LED Integrated Batten T5, 10 Watt, 2 Ft White, indoor decorative PVC extruded T5 LED battern-integrated type in replacement of old unsv existing 18/14 watt FTL fittings any type complete all as specified and directed by Engineer-in-Charge. Make : Halonix Cat Part No. HLB-07-20-CW-IP or its equivalent as Bajaj/CG/Havells.

S&F exhaust fan, metal body, copper wound 300mm sweep with louvers and connected 0.50 Sqmm cable to ceiling rose including taking down of old exhaust fan and depositing to MES store yard complete all as specified and directed by Engineer-in-Charge.

S&F Hot Water Storage (Geyser) 25 Ltrs Capacity, BEE 5 Star Rated, including taking down of old geyser and depositing to MES store yard and connecting up the geyser with replacement of cable three core cable of size 2.5 Sqmm by means of plug top 20 Amps complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of sheet metal enclosures double door for DBs when MCBs to be used SPN-12 Way, 240V with 200 Amp rated busbar complete as per site requirement all as specified and directed by Engineer-in-Charge. (Make: Legrand/ Siemens/L&T/Havells/)

S&F in replacement MCB SPN 32 Amps 'C' series, breaking capacity 10 Ka, 'C' curve 240 volts, 50 Hz including necessary incoming and out going electric connection with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge.

S&F in replacement for sub main wiring with two single core PVC insulated FRLS cables with stranded copper conductors 6 Sqmm, 1100 Volts grade on & including PVC Conduit 25mm medium grade complete with conduit accessories and copper cable 6 sqmm continuous earth wire (Two runs of cable with 01 earth wire shall be measured as one length) complete all as specified and directed by Engineer-in-Charge. Note:- The rate is inclusive of making good the disturbed surface and same surface finishes with the adjoining surface of disturbed area ie with OBD/colour wash/white wash and wall putty where ever required. Make of cable : Polycab/Finolex/Havells

S&F switch piano, flush type 5 Amps single pole one way, complete all as specified and directed by Engineer-in-Charge.

S&F Batten holder with PVC body and back plate suitable for LED Bulb B-22 cap complete all as specified and directed by Engineer-in-Charge.

S&F LED RETROFIT Lamp of 9 watt for fixing in batten holder/bulkhead point complete all as specified and directed by Engineer-in-Charge.

S&F Sheet metal enclosures for DB's when MCBs to be used single pole and neutral 4 way complete all as specified and directed by Engineer-in-Charge.

S&F LED Integrated Batten T5 LED tube light fitting of 10 Watt - 2' white, indoor decorative aluminium extruded T5 LED battern integrated type complete with including fliexble wire complete all as specified and directed by Engineer-in-Charge. Make : C&S Cat Part No LTTB4F20WLED/W or equivalent in Havells/Halonix/Philips/CG.

S&F MCB SPN of 10 Amp 240 volts B-series with no surge current complete all as specified and directed by Engineer-in-Charge. Make:- C&S cat part No. CSMB Cat : CSMBS1B10N of C&S or equivlet make in Havells/Legrad/ABB.

S&F MCB SP 6 to 32 Amps 240 volts, 10 KA, 'C' curve complete all as specified and directed by Engineer-in-Charge.

M&L for sub main wiring with two single core PVC insulated FRLS cables with stranded copper conductors 6 Sqmm, 1100 Volts grade on & including concealed PVC Conduit 25mm medium grade complete with conduit accessories and copper cable 6 sqmm continuous earth wire (Two runs of cable with 01 earth wire shall be measured as one length) complete all as specified and directed by Engineer-in-Charge. Note:- The rate is inclusive of PCC works and making good the disturbed surface with CM 1:3 and same surface finishes with the adjoining surface of disturbed area i.e with OBD/colour wash/white wash and wall putty where ever required. Make of cable : Polycab/Finolex/Havells

S&F LED Integrated Batten T5, 20 Watt, 4 Ft White, indoor decorative aluminium extruded T5 LED battern -integrated type with including fliexble complete all as specified and directed by Engineer-in-Charge. Make : Cat Part No LTTB4F20WLED/W of C&S or its equivalent as Havells/Halonix/Philips/CG.

S&F LED RETROFIT Lamp of 9 watt for fixing in batten holder complete all as specified and directed by Engineer-in-Charge.

Taking down wall fan of any type any size and refixing after completion of special repair work complete all as specified and directed by Engineer-in-Charge.

S&F GI tubing medium grade with all fittings (such as bend, elbow, tees, short pieces, connectors, diminishing pieces, caps plug & union etc) such as laid in trench or on walls/ ceiling/ floor of 25 mm bore complete all as specified and directed by Engineer-in-Charge.

M&L for Cutting existing GI pipe of size 80 mm for taking new connection incl all fittings,joints etc complete all as specified and directed by Engineer-in-Charge.

Supply Installation and commissioning of Raw Water Pump (0.75 KW motor with 10 mtr head) of capacity 4000 LPH To feed the Dual Media Filter at pressure more than 3.0 bar, which is minimum operating pressure for filter complete all as specified and directed by Engineer-in-charge. Make-CRI/Xylem/Grundfos

Supply Installation and commissioning of Dula media filter (FRP 13"x54" filter with fine sand 100KG pebels 20KG stand) (4000 LPH) To remove the total suspended solids, dirt, iron, and reduce silt density index, which can foul the membranes and remove color and odor complete all as specified and directed by Engineer-in-charge. Make-Vessel pentair/ Grace/Kemflw.

Supply Installation and commissioning of Activated carbon filter (4000LPH) To remove the total suspended solids, bacteria etc complete all as specified and directed by Engineer-in-charge. Make-Vessel pentair/ Grace/ Kemflw.

Supply Installation and commissioning of Anti Scalant Dosing system (100 Ltrs solution tank with 6 LPH pump fitted in skid) To Dose anti sealant chemical to protect the scaling formation on R.O. membranes complete all as specified and directed by Engineer-in-charge. Make- E dose/UKL/Minimax.

Supply Installation and commissioning of Micron Filter (3000 LPH, 20 Inch) To remove the particles up to 20 microns and reduce silt density index levels at acceptable level complete all as specified and directed by Engineer-in-charge. Make- Azud/3M/Bigblue.

Supply Installation and commissioning of High Pressure Pump (2.1 KW motor with 10 Mtrs head fitted in skid) (5000 LPH) to feed the Reverse Osmosis Membranes at pressure more than the osmotic pressure taking into consideration flux Rate, flow and recovery complete all as specified and directed by Engineer-in-charge. Make- CRI/Xylem/Grundfos

Supply Installation and commissioning of RO Membrane of capacity 250 LPH (Model No. 40-40) to remove major parts of the TDS up to 90-95% by Reverse Osmosis Membranes arranged and designed to give adequate flow and Recovery complete all as specified and directed by Engineer-in-charge. Make- Dow / Hydronautics/GE.

S&F RO Pressure tube (FRP 1 element) to pack Reverse Osmosis Membranes and operate at high pressure complete all as specified and directed by Engineer-in-charge. Make- UKL/Grace/Kemflw.

Supply installation and commissioning of electro control panel (Auto/ Manual) Having all interconnected starters pump safety measures and internal wiring complete all as specified and directed by Engineer-in-Charge. Make-L&T/Kemflw/Ojas. The panel consisting of the following items 1. Feeder for feed pump 0.75 KW 2. Feeder for high pressure 2.1 KW 3. Feeder for dosing system 0.5KW 4. Spare feeder 5. MCB SPN 32 Amps 6. MCB SP 16 Amps 7. XLPE insulated armoured 16 Sqmm x 2 Core cable (heavy duty) electric cable with aluminium stranded conductor 1100 Volts grade for charge the panel 40 RM.

S&F following instrumentation complete all as specified and directed by Engineer-in-charge. a) Flow Meter: To measure the flow of Water (2000LPH Capacity) b) Low Pressure Switch: To protect the RO pump from dry running (0 to 5 BAR Pressure range) c) High Pressure Switch: To protect the RO pump from backpressure (0 to 5 BAR Pressure range) d) Pressure Gauges: For calculate ^P for each unit of RO system, back washes system. Make- IMPELL/KING/SERVO/ ALTAWEL/PK AQUA

M&L for plumbing and fitting complete all as specified and directed by Engineer-in-charge. (a) GI pipe 40mm for water supply tank-10 RM (b) UPVC pipe 40mm for internal RO connection - 20 RM (c ) Elbows 40mm- 08 Nos (d) Tee 40mm -04 Nos (e) Necessary valves, elbows and connection piece as required. (f) ON-OFF valves at feed pump and inlet and outlet of system. (g) NRV 1/8 at dosing system Make:-Astral/Jindal/TATA/Kansal

Supplying, installing, testing & commissioning Solar Water heating system (Evaculated Tube collector ) to raise water temperature upto 60-70 degree celcius on clear sunny day with 1000LPD hot water tank as per IS-12933 and IS 12976 including electrical backup of 3 KW including all fittings and angle iron support (60x60x6mm) with necessary fabrication, welding work complete with nuts bolts and washers and painting with two coats of synthetic enamel paint over a one coat of red oxide primer for mounting of hot water tank complete all as specified and directed by Engineer-in-charge. Make:- INTERSOLAR/ SSSPL/ TATA BP SOLAR/ RACOLD

S&F 3- layer PP- R polypropylene random copolymer concealed pipes having inner dia 16 mm SDR 7.4 (PN 16) UV stabilized and anti microbial fusion welded having thermal stability for hot and cold water supply including all PP-R plain and brass threded polyproyline random fittings fixed complete to walls,ceilings or in floors etc with all fitting such as required at site complete all as specified and directed by Engineer-in-charge.

S&F 3- layer PP- R polypropylene random copolymer concealed pipes having inner dia 20 mm SDR 7.4 (PN 16) UV stabilized and anti microbial fusion welded having thermal stability for hot and cold water supply including all PP-R plain and brass threded polyproyline random fittings fixed complete to walls,ceilings or in floors etc all fitting such as required at site complete all as specified and directed by Engineer-in-charge.

M&L for Making connection of PP-R distribution branch with PP-R main of size 20mm bore with all fittings including cutting and making fusion joints complete all as specified and directed by Engineer-in-charge.

M&L for cutting the existing tubing and inserting new reducer Tee of suitable size including necessary screwing threading, tail pieces, short pieces, jointing material etc complete all as specified and directed by Engineer-in-charge.

S&F PP-R Gate valves (brass insert) as per requirement of the site complete suitable for 20mm bore pipe, screwed both side ends for 3-Layer PP-R pipe complete all as specified and directed by Engineer-in-charge.

S&F Gun metal glove or gate valve with iron wheel head, complete suitable for 25mm bore pipe, screwed both side ends for GI pipe or unions and fixed in size 25mm dia complete all as specified and directed by Engineer-in-charge.

S&F Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed of 25mm size complete all as specified and directed by Engineer-in-charge.

M&L for Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 incl painting with two coats of synthetic enamel paint over a one coat of red oxide primer for mounting of water tank and similar work complete all as specified and directed by Engineer-in-charge.

S&F for Cement concrete in foundation ,filling and mass concrete ,type B2,1:2:4 complete all as specified and directed by Engineer-in-charge.

S&F for Sheet metal plug & socket enclosure with MCB SP 20Amps, 240 V complete all as specified and directed by Engineer-in-charge.

M&L for sub main wiring with two single core PVC insulated FRLS cables with stranded copper conductors 4 Sqmm, 1100 Volts grade on & including PVC concealed wiring with accessories and copper cable 4 sqmm continuous earth wire (Two runs of cable with 01 earth wire shall be measured as one length) complete all as specified and directed by Engineer-in-Charge. Note:- The rate is inclusive of cutting/chasing and making good the disturbed surface with CM 1:3 and same surface finishes with the adjoining surface of disturbed area ie with OBD/colour wash/white wash and wall putty where ever required. Make of cable : Polycab/Finolex/Havells

Note:- The contract sum shall be after deducting the amount of Credit shown in Credit Schedule of this Tender.

M/S.M.S.Devi.Const.Co