Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.5 LAccepted-AOC HIMACHAL PRADESH HP | L1 | Accepted-AOC AOC | |
| 2 | L2₹3.5 L+₹18,505.30 (5.65%)Rejected-AOC | L2 | Rejected-AOC Reject | |
| 3 | L3₹3.4 L+₹13,244 (4.04%)Rejected-AOC BANSAL NIWAS RAM NAGAR SHIMLA 171004 HIMACHAL PRADESH | SHIMLA | HIMACHAL PRADESH | 171004 | L3 | Rejected-AOC Reject |
| Sl No | Description | Qty | Unit | SANDEEP KUMAR L2 | Tilak Singh L3 | Yogesh thakur L1 |
|---|---|---|---|---|---|---|
| 1.00 | Excavation in foundation, trenches etc. in all kinds of soil such as pick work, jumper work, blasting work in soft / hard rock, chiselling in soft / hard including wedging out of a rock where blasting is prohibited and stacking the excavated earth up to all lifts, stacking the excavated soil not more than 3.0 mtrs. clear from the edge of excavation and then returniing the stacked soil in 15 centimeters layers when required in to plinths, sides of foundation etc. consolidating each deposited layer by ramming and waterng and then disposing of all surplus excavated earth as per direction and to the entire satisfation of Engineer- in- charge up to leads and lifts. | 8.1 | Cum | 360 ₹2,916 | 350 ₹2,835 | 330 ₹2,673 Lowest |
| 2.00 | Providing and laying cement concrete 1:3:6 ( 1 cement:3sand :6 graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth. | 5.4 | Cum | 6,700 ₹36,180 | 6,600 ₹35,640 | 6,500 ₹35,100 Lowest |
| 3.00Providing form work with steel plated 3.15mm thick welded with angle iron in frame 30x30x5mm, so as to give a fair finish including centring,shuttering,strutting and propping etc. with wooden battens and ballies height of propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for insitu-reinforced concrete and plain. | ||||||
| 3.01 | Vertical surfaces such as walls(any thickness) partitions and the like including attached pilasters, buttresses, plinth and string courses and the like complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge. | 36 | Sqmt | 410 ₹14,760 | 400 ₹14,400 | 380 ₹13,680 Lowest |
| 4.00 | Brick work using common burnt clay building brick in foundation and plinth in cement mortar 1:6(1cement:6sand) 2nd class brick complete all leads and lifts to the entire satisfaction of Engineer-in-charge. | 3.98 | Cum | 11,400 ₹45,372 | 11,500 ₹45,770 | 11,000 ₹43,780 Lowest |
| 5.00 | Fixing of fencing pannel of size 1.20 m x1.80 m Mtrs of Jali 25x25mm welded to M.S. black tube of 32mm dia of 14 gauge mm with M.S. Flats 20x3mm, welded all around the pipe panel two on both sides and providing hold fats 7 Nos of M.S. flat of 32x3mm thickness including cutting, welding, painting with red oxide paint to the enitire satisfaction of Engineer-in-charge. (Labour rate) | 33 | Cum | 5,550 ₹1,83,150 | 5,500 ₹1,81,500 | 5,200 ₹1,71,600 Lowest |
| 6.00 | 20mm Cement plaster in single coat on rough side of interior plastering upto floor two level ncluding arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:4 including carriage of material in all leads & lifts. | 119.1 | Sqm | 300 ₹35,730 Lowest | 350 ₹41,685 | 320 ₹38,112 |
| 7.00 | White washing with lime on undecorated wall surface two coats to give an even shade including throughly brooming the surface to remove all dirt, dust, mortar dust and other foreign matter as per direction and to the entire satisfaction of Engineer-in-charge upto all lead and lifts. | 119.1 | Sqmt | 120 ₹14,292 Lowest | 130 ₹15,483 | 120 ₹14,292 Lowest |
| 8.00 | Painting two coats excluding priming coat on new steel and other metal surface with enamal paint to give an even shade I/c cleaining the surface of all dirt dust and other foreign matter with enamel paint other than white as per direction and to the entire satisfaction of Engineer-in-charge upto all lead and lifts. | 53.46 | Sqm | 110 ₹5,880.6 Lowest | 115 ₹6,147.9 | 110 ₹5,880.6 Lowest |
| 9.00 | Providing and Fixing 1mm thick M.S Sheet garrage door with frame of 40mmx40mmx6mm angle iron 3.15mm M.S gusset plates at the junctiond and corners all necessary fittings complete including applying a priming coat of red lead paint using M.S angles 40mmx40mmx6mm for cliageral braces complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge. | 1.62 | Sqmt | 1,650 ₹2,673 | 1,700 ₹2,754 | 1,600 ₹2,592 Lowest |
Tender Value
₹3.3 L
EMD Value
₹6,677
Closing Date
30 Aug 2025, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer
Division Bhoraj
LWSS Aman in GP Aman in Tehsil Bhoraj
2025_HPIPH_112617_1
5196-5255 dated 20-08-2025
Open Tender
Civil Works
Item Rate
120 days
Executive Engineer
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
EE Bhoraj
₹6,677
8 Dec 2025
21 Aug 2025
1 Sept 2025
21 Aug 2025
30 Aug 2025
21 Aug 2025
Amount
Excavation in foundation, trenches etc. in all kinds of soil such as pick work, jumper work, blasting work in soft / hard rock, chiselling in soft / hard including wedging out of a rock where blasting is prohibited and stacking the excavated earth up to all lifts, stacking the excavated soil not more than 3.0 mtrs. clear from the edge of excavation and then returniing the stacked soil in 15 centimeters layers when required in to plinths, sides of foundation etc. consolidating each deposited layer by ramming and waterng and then disposing of all surplus excavated earth as per direction and to the entire satisfation of Engineer- in- charge up to leads and lifts.
Providing and laying cement concrete 1:3:6 ( 1 cement:3sand :6 graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth.
Providing form work with steel plated 3.15mm thick welded with angle iron in frame 30x30x5mm, so as to give a fair finish including centring,shuttering,strutting and propping etc. with wooden battens and ballies height of propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for insitu-reinforced concrete and plain.
Vertical surfaces such as walls(any thickness) partitions and the like including attached pilasters, buttresses, plinth and string courses and the like complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge.
Brick work using common burnt clay building brick in foundation and plinth in cement mortar 1:6(1cement:6sand) 2nd class brick complete all leads and lifts to the entire satisfaction of Engineer-in-charge.
Fixing of fencing pannel of size 1.20 m x1.80 m Mtrs of Jali 25x25mm welded to M.S. black tube of 32mm dia of 14 gauge mm with M.S. Flats 20x3mm, welded all around the pipe panel two on both sides and providing hold fats 7 Nos of M.S. flat of 32x3mm thickness including cutting, welding, painting with red oxide paint to the enitire satisfaction of Engineer-in-charge. (Labour rate)
20mm Cement plaster in single coat on rough side of interior plastering upto floor two level ncluding arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:4 including carriage of material in all leads & lifts.
White washing with lime on undecorated wall surface two coats to give an even shade including throughly brooming the surface to remove all dirt, dust, mortar dust and other foreign matter as per direction and to the entire satisfaction of Engineer-in-charge upto all lead and lifts.
Painting two coats excluding priming coat on new steel and other metal surface with enamal paint to give an even shade I/c cleaining the surface of all dirt dust and other foreign matter with enamel paint other than white as per direction and to the entire satisfaction of Engineer-in-charge upto all lead and lifts.
Providing and Fixing 1mm thick M.S Sheet garrage door with frame of 40mmx40mmx6mm angle iron 3.15mm M.S gusset plates at the junctiond and corners all necessary fittings complete including applying a priming coat of red lead paint using M.S angles 40mmx40mmx6mm for cliageral braces complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge.
SANDEEP KUMAR (BID ID -546821)
Tilak Singh (BID ID -546818)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .