Misc civil maintenance and renovation of suite/room bathrroom and misc other work at 17 Clyde Road Feild Hostel Lko

Laying and Jointing PVC Pipe. Heading

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge:

Providing and laying in position cement concrete of 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)excluding the cost of centering and shuttering - All work up to plinth level, the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing.1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources), the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources), the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick, the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Steel reinforcement for R.C.C. work ready to use "cut and bend" rebars of approved make from factory/workshop to construction site including placing in position and binding all complete upto/above plinth level, the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections, the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand),the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Brick work with Cement mortar 1:4 (1 cement : 4 coarse sand) & common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Half brick masonry with Cement mortar 1:4 (1 cement :4 coarse sand) & common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up ton floor V level,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels,Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble, the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.raea of slab upto 0.5 sqm.

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters,35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Providing & fixing of Lamination both side on flush door complete with all fittings round mortis door clousure Door Lock & Door Closure), etc all complete all complete as per drawing, specification and direction of engineer incharge. NSI approved rate)

Providing and fixing ISI marked, IS : 1341, M.S. heavy weight bright finished butt hinges with necessary screws etc. complete ,75x60x3.10 mm, the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Providing and fixing ISI marked oxidised 200x10 mm M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378),the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Providing and fixing ISI marked 85x42 mm oxidised M.S. pull bolt lock conforming to IS : 7534 with necessary screws bolts, nut and washers etc. complete (Copper oxidised as per IS 1378), the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Providing and fixing ISI marked oxidised 250x20x6 mm M.S. door latches conforming to IS:5930 with screws etc. complete (Copper oxidised as per IS 1378), the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Providing and fixing ISI marked oxidised 100 mm M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378), the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Providing and fixing special quality bright finished brass 40mm cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete, the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Providing and fixing PTMT handles with necessary screws etc. complete.150x34x24 mm weighing not less than 26 gms the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Providing and fixing factory made panel 30 mm thick pre laminated PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete (Hot finished welded type tubes).,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides, the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

40 mm thick with 20 mm nominal size stone aggregate Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

18 mm thick Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Extra for making chequers of approved pattern on cement concrete floors, steps, landing, pavements etc, the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.., complete,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately), the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.size of tile 600x600mm.

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.(Size 600mm x 600mm)

Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles,included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Providing corrugated G.S. sheet roofing (0.80 mm thick with zinc coating not less than 275 gm/m²) including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required, ,included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Providing and fixing on wall face 110 mm diameter unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Providing and fixing on wall face 110mm unplasticised - PVC moulded Coupler for unplasticised Rigid PVC rain water pipes, included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Providing and fixing on wall face 110mm unplasticised - PVC moulded Single tee with door for unplasticised Rigid PVC rain water pipes, included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Providing and fixing on wall face 110mm unplasticised - PVC moulded Bend 87.5° for unplasticised Rigid PVC rain water pipes, included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge.

12 mm cement plaster of mix 1:4 (1 cement: 4 coarse sand) the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

12 mm cement plaster of mix 1:6 (1 cement: 6 coarse sand) the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

20 mm cement plaster of mix 1:4 (1 cement: 4 coarse sand) the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

12 mm Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement.the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete, the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives.New work (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. (CSI 13.48 A)

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives.New work (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Washed stone grit plaster on exterior walls height upto 10 metre above ground level, in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand ), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15 mm cement plaster 1:1/ 2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10 mm nominal size), in panels with groove all around as per approved pattern, including scrubbing and washing the top layer with brushes and water to expose the stone chippings ,complete as per specification and direction of Engineer-in-charge (payment for providing grooves shall be made separately), the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Applying BIRLA PUTTY or equivalent putty on previousaly bila putty smoothen surface over one cost of water base cement primer of ICI or equivalent brand for smoothining and leveling of the surface as per requirement and direction of E/I including cost of all material , labour and T&P required for proper completion of work.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour (One Coat),the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade (One or more coats on old work),the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Painting with aluminium paint of approved brand and manufacture to give an even shade (One or more coats on old work),the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Polishing on Old wood work with ready made wax polish of approved brand and manufacture the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Finishing walls with textured exterior paint on Old work (Two or more coats on existing cement paint surface applied @ 3.28 ltr/10 sqm.of required shade

Finishing walls with textured exterior paint on New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqmof required shade :

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.(With Cement Mortar 1:4 (1 cement , 4 coarse sand)

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Providing and fixing brass 20 mm diameter.curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete.

Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account)

Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in-charge.

Providing & fixing White vitreous china water closet squatting pan (Indian type) (Orissa pattern W.C Pan of size 580x440 mm) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge.

Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Demolishing cement concrete Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer-in-charge.

Demolishing brick work In cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead ,Of area 3 sq. metres and below, the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead For thickness of tiles 10 mm to 25 mm included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Dismantling 15 mm to 40 mm nominal bore G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge .

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Providing and laying 60mm faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make (a) 15 mm nominal dia included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Providing and fixing 32 mm flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete, the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.

Providing and fixing 15 mm Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge (Internal work - Exposed on wall) .

Providing and fixing 25 mm Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge (Internal work - Exposed on wall) .

Providing and fixing 15 mm Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge (Concealed work, including cutting chases and making good the walls etc)..

Providing and fixing 25 mm Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge (Concealed work, including cutting chases and making good the walls etc)..

Providing and fixing 65 mm G.I. pipes complete with G.I. fittings including trenching and refilling etc the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. (25 mm to 40 mm Nominal Bore)

Providing and fixing 65mm gun metal gate valve with C.I. wheel of approved quality (screwed end) , the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Providing and fixing 25mm ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :

Providing and fixing 15 mm nominal bore uplasticised PVC connection pipe (45 cm length) with brass unions, the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS:8931, the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms

Providing and fixing 15 mm C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 ,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Providing and fixing 15 mm C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931, the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge

Providing and fixing aluminium work for For fixed portion of doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron))

Providing and fixing aluminium work for For Shutter of doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron))

Providing and fixing glazing With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. . (Cost of aluminium snap beading shall be paid in basic item).

Providing and fixing double action hydraulic floor spring With stainless steel cover plate minimum 1.25 mm thickness of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.

Filling the gap in between aluminium frame (Upto 5mm depth and 5 mm width) & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete.

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with waterproofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours,(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compoundconsisting of applying:(a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm.(c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entiretreatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around,the work fourth and final layer of brick tiling with cement mortar which will be paid for separately. included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Providing, mixing and applying bonding coat of Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect.

Providing and fixing in place a full height storage cabinet 450 mm deep made with 19 mm thick ISI marked ply borad, all interior surfaces to finished with pasting of 0.8 mm thick mica and all exterior surfaces to be finshed with pasting of 1 mm thick mica of texture and colour as approved by Engineer in Charge including all labour, T&P, other items like (but not limited to) fevicol, nails screws, higes, sliders,door handles, multipurpose lock of godrej or equivalent rate etc. required for proper completion of works, to be measured interms of front area only.

2.5 cm thick 1:1.5:3 plain cement concrete floor with cement, approved coarse sand & 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and T&P etc, required for proper completion of the work. (without base CC).

Cleaning of septic tank including disposal of waste out side the UPPCL area as per direction of the Engineer-in-charge including cost of all labour,T&P etc.required for proper completion of the work.

Providing and fixing sun-film of Gareware or equivalent make on glass panes of door and window shutters including cost of all materials,labour and T&P etc. required for proper completion of the work.

Attending to petty maintenance service like plumbing service,welder service, mansion service and carpenter service required as below. (Job attending by one no. Plumber/welder/mason /carpenter with one no. helper per hour or part of an hour.)

S/F of Waste Coupling Jaquar or Equivalent Model No-ALD-705L130 or as approved By engineer incharge,the work included cost of labour, material T&P etc for proper completion of work.

Supply and fixing of Health Faucet Jaquar or Equivalent Model ALD-573 or as approved By engineer incharge,the work included cost of labour, material T&P etc for proper completion of work.

Supply and fixing wall hung WS with normal closed seat cover Jaquar or Equivalent Model CNS-WHT-959JSPP as approved By engineer incharge,the work included cost of labour, material T&P etc for proper completion of work.

S/F of Bib Cock jaquar or Equivalent Model No-CON-047KN or as approved By engineer incharge,the work included cost of labour, material T&P etc for proper completion of work.

S/F of jaguar make flushing plate jaquar or Equivalent Model No-CHR 152415 or as approved By engineer incharge,the work included cost of labour, material T&P etc for proper completion of work.

Providing and fixing soap dish chromium plated with brackets fixed to wooden cleats with brass screws including supply of all materials,labour and T&P etc.required for proper completion of the work.

Providing and laying 110 MM SWR, PVC ( Finolex or equivalent ) pipe including cost of excavation, C.C etc including its jointing and connection, all materials, labour and T&P etc. required for proper completion of the work.

Providing and laying 110 MM SWR, PVC ( Finolex or equivalent ) pipe BENDincluding cost of excavation, C.C etc including its jointing and connection, all materials, labour and T&P etc. required for proper completion of the work.

Providing and laying 110 MM SWR, PVC ( Finolex or equivalent ) pipe SOCKET including cost of excavation, C.C etc including its jointing and connection, all materials, labour and T&P etc. required for proper completion of the work.

Providing and laying 110 MM SWR, PVC ( Finolex or equivalent ) pipe Plain TEE including cost of excavation, C.C etc including its jointing and connection, all materials, labour and T&P etc. required for proper completion of the work.

Supply of labor (Mazdoor) for sifting furniture, T&P & Other required for proper completion of the work.

Supply and fixing 100 mm PVC Nahani Trap India make of heavy approved quality complete with CI grating, including supply of all materials,labour and T&P etc. required for proper completion of the work.

Providing and fixing 100 mm dia PVC "P" or "S" trap including cement concrete and all materials, labour cartage T&P etc.required for proper completion of the work.(For W.C.).

Repairng of old cushioned Single seater Sofa removing of old damage upholstery as required then wooden frame repairing and re-polishing, upholstery of new 75 mm thick sleepwell foam 32 denstry on seat and back side of Sofa using 50 mm thick sleepwell foam 32 denstry, . The work include cost of all labour,material T&P required for proper completion of work as approved by the Engineer -in-Charge.

Repairng of old cushioned Three seater Sofa removing of old damage upholstery as required then wooden frame repairing and re-polishing, upholstery of new 75 mm thick sleepwell foam 32 denstry on seat and back side of Sofa using 50 mm thick sleepwell foam 32 denstry, The work include cost of all labour,material T&P required for proper completion of work as approved by the Engineer -in-Charge.

Providing and fixing superior,approved quality cotton curtain height approximately 2.65mtr upper side margin 0.05mtr, lower side margin 0.02 mtr, upper side margin fitted proper tape for hanging curtain with the help of hooks and rings Lucknow as per direction of Engineer in charge. The work includes cost of all labour, material and T&P etc.

Repairing of old cushioned officer chair at, removing of old damage upholstery as Requied then wooden frame repairing and re-polishing, upholstery of new 75 mm thick sleepwell foam 32 denstry on seat and back side of chair using 50 mm thick sleepwell foam 32 denstry, The work includes cost of all labour, material and T&P etc.

Providing and fixing 4.0 mm thicknes ACP in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item).

Providing ,making & Fixing of 6 mm PVC Wall Panneling as per drawing,on wall surface including cost of all materials,labour and T&P etc. required for proper completion of the work.

Providing& making & fixing of Wall Panneling on demaged surface the surface claded with 6 mm water proof & fire retardant ply with the help of nail solution on wall surface as per the approved desin all complete as per drawing, specification and direction as approved by E/I.

Providing& making & fixing of Wall Panneling as per drawing frem work to be coverd claded with 12mm water proof & Fire Retardent ply with the help of fevicol nail screwand make groove & final surface to be finised with 6 mm thick MDF & 1mm Laminate complete with painted or polished as per the approved desin all complete as per drawing, specification and direction as approved by E/I.

Supply and Fixing of Basin Trap with regular swinging spout(wall mounted Modle) jaquar or Equivalent Model FLR-CHR -5347 or as approved By engineer incharge,the work included cost of labour, material T&P etc for proper completion of work.

Existing old damage Tile and Fixing New false ceiling with 12mm thick Arm strong Fire resistant gyp board false ceiling system of approved type fixed to a Withrequired hanger Including supply of all materials, labour and T & P etc required for proper completion of work.

Supply and fixing of Concelled cistern with wall mounting frame & instalation kit Model No CIB-31801011XW-2400WS with control plate lemon design Model No-CIS-CHR-31204190 of Jaquar make or equivalent as approved by E/I. The work includes cost of all labour, material T&P for proper completion of work.

Supply and fixing of Jet Spray jaquar or Equivalen Model No- ALE-CHR-547 or as approved By engineer incharge,the work included cost of labour, material T&P etc required for proper completion of work.

Supply and fixing of Two way Bib cock with wall flange Jaquar or Equivant make Model No-OPP-15041PM as approved by E/I,the work included cost of all labour, material T&P required for proper completion of work.

Supply and fixing of Rack bolt For WC Model No-ZPS-SNS-RB01 of Jaquar make or equivalent as approved by E/I. The work includedcost of all labour, material T&P Required for proper completion of work.

Supply and fixing of Wax Seal Model No-ZPS-WHT-1401 of Jaquar make or equivalent as approved by E/I. The work included cost of all labour, material T&P Required for proper completion of work.

Supply and fixing of Cistren Base Plate Model No- ZMP - CHR-003 or approved a of Jaquar make or equivalent as approved by E/I. The work included cost of all labour, material T&P Required for proper completion of work.

Supply and fixing of Cistren ball Cock Model No- ZMP - CHR-002 of Jaquar make or equivalent as approved by E/I. The work included cost of all labour, material T&P Required for proper completion of work.

Supply and fixing of Cistren Syphon Model No- ZMP - CHR-001 of Jaquar make or equivalent as approved by E/I. The work includes cost of all labour, material T&P Required for proper completion of work.

Supply and fixing of Conector Pipe Model No- ZPS-WHT-CP01 of Jaquar make or equivalent as approved by E/I. The work included cost of all labour, material T&P Required for proper completion of work.

Supply and fixing of Brass Inlet Fixing Model No- ZPS-BRC-5007of Jaquar make or equivalent as approved by E/I. The work includes cost of all labour, material T&P Required for proper completion of work.

Supply and fixing of Rubber Gasket Inlet Model No- ZPS-BLK-1403 of Jaquar make or equivalent as approved by E/I. The work includes cost of all labour, material T&P Required for proper completion of work.

Supply and fixing of Metropole Flush Valve Regular 32mm Size (Concealed Body) with Exposed Shut Off Provision & 100mm Square Plate Model No- FLV-1095NSQZPS-BLK-1403 of Jaquar make or equivalent as approved by E/I. The work included cost of all labour, material T&P etc for proper completion of work .

Dismanteling, Alignment & Refiixing of existing Aluminium Door including replacement of handle, lock,hinges , tower bolts, EPDM rubber beading, Glass/ACP as requied including cost of silicon sealent,screw,fastner etc (Excluding door closure )and T&P for proper completion of work as approved by E/I.

Dismanteling, Alignment & Refiixing of existing aluminium sliding window including replacement of handle, lock,Hinges ,tower bolts, EPDM Rubber beading,Sliding Roller, Glass as requied including cost of silicon sealent,screw,fastner etc and T&P for proper completion of work as approved by E/I.

Repairing of wooden cabinet door fitted at diffrent cabin .door made with 19 mm swastik board then proper fiinsh with the help of 1mm thick laminate after then one no lock and one no handle fitted in cupboard ,The work include cost of all labour,material T&P required for proper completion of work.NSI (Rate approved)

Supply and Fixing of 5 blade Exhaust fan ventile air dx 225 mm of Havells or equivalent make including all material, T&P etc required for proper completion of work as approved by engineer in charge.

Wiring point for light with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable but in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit with modular type switch in place of piano type switch. .

Wiring point for fan / fresh air fan (light duty exhaust fan) with 1.5 sq.mm. FRLSH PVC insulated multistrand single core copper conductor cable in in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduitwith modular type switch in place of piano type switch

Wiring Point for plug with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit plug point with modular switch & socket in place of piano type switch & socket..

Supply and Fixing of power plug with 20 Amp /250 volt Flush Type modular socket and 5 pin 20A/250 volt flush type universal modular socket switch on concealed M.S. box including supply of all material labour T&P etc.required For proper completion of work

Supply and wiring of submain with two number 2.5 sqmm PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy duty 2 mm thick concealed PVC conduit with 1.5 sqmm FRLSH PVC insulated 1100 Volt grade multistrande single core copper conductor as earth continuity wire

Supply and wiring of submain with two number 4 sqmm FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy duty 2 mm thick PVC conduit with 2.5 sqmm multistrand copper conducor cable as earth continuity wire drawn in conduit

Supply and fixing of LED Tube Light batten fitting suitable for up to 1 X 22 watt LED tube light on Surface complete in all respect

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.