EXTERIOR EMULSION ROAD FURNITURE TOUGHENED GLASS DOOR AND POP CEILING FOLLOWING ETC AT TECHNICAL AND RESIDENTIAL AREA AT R AND DE E DIGHI PUNE

Dismantling of floors health or walls tiling and Stone floor including cement mortar bedded & removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n exc 15 cm (below or above ground level) complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-0 (12.5 mm graded stone aggre) as in sub base of floor complete all as specified and directed.

M&L for Rendering 10mm thick (as backing coat) on fair faces of brick work or concrete sufaces in CM 1:3 complete all as specified and directed.

M&L for Vitrified ceramic tiles as in flooring and skirting of Light shade 9 to 10mm thick (square/ rectangular) polished area of each tiles size exc 0.11 sqm but N exc 0.36 sqm, 9 to 10 mm thick in floors etc., set and jointed in neat cement slurry and pointed in white or colour cement to match including 15 mm thick scred bed in CM (1:4)complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 sqm but not exceeding 4 sqm each and removing from site complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 sqm each and removing from site complete all as specified and directed.

Taking down Shutters of any description exc 1 sq. m but n exc 2 sqm each complete all as specified and directed.

Taking down shutter exc 1 Sqm and n exc 2sqm and refixing in same opening after resecuring or easing & adjusting complete all as specified and directed.

S & F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F factory made 100% soild wood plastic composite (WPC) door frame, single rebated 90mm x 45mm/125x45 made from wood plastic composite (single extruded process) material with density 780 Kg/Cum, including necessary fittings and fixtures to fix the chowkat as per manufacture instructions complete all as specified and directed. Note: During fixing the chowkat the surrfaces of jambs shall be made in true plumb in cement plaster 1:4 as in making good or similar in wall tiles etc as per site requirement.

S&F Aluminium, anodised barrel tower bolt 150 mm complete all as specified and directed.

S&F Aluminium handles fabricated type 150 mm complete all as specified and directed.

S&F Aluminium alloy, anodised sliding door bolt with hasp, staple (Bolt type) and fixing clips of sheet, cast or extruded section or cast aluminium alloy and fixed 300 mm complete all as specified and directed.

S&F Mild steel cold rolled Butt hings 100 mm medium weight complete all as specified and directed.

Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over back rod of required size and of approved quality, complete all as specified and directed. Note : (Glass or wiremesh shall be paid separately) For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

M&L for sheet glass ordinary quality 5.0 mm thick fix in Aluminium/ steel, window/vent shutter in each pane complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staples (304 Grade) complete all as specified and directed.

Taking down cement plaster from brick / concrete/ stone surfaces including racking out joint, hacking for key and scrubing down with water etc complete all as specified and directed.

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 and making the surface even and fair without using extra cement complete all as specified and directed.

M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces of any description in CM 1:6 and finishing the surface complete, all as specifiied and directed.

M&L for preparation of newly plastered wall surface and applying two coats of water bound distemper over a coat of primer complete all as specified and directed.

M&L for preparation of newly plastered surface of wall, applying two coats of cement based paint over a coat of exterior primer after preparation of surfaces at any height including necessary scaffolding etc complete all as specified and directed.

M&L for preparation of newly plastered surface and applying two coats of weather proof exterior paint white or tinted over a coat of acrylic exterior primer incl nescessary scafolding complete all as specified and directed.

M&L for complete removal of existing treatment on wall surfaces, fins, fascias etc by scrubing, sand papering and applying two coats of weather proof exterior paint white or tinted over a coat of acrylic exterior primer incl necessary scaffolding complete all as specified and directed.

M&L for preparing of existing treatment on wall surfaces, fins, fascias etc by scrubing, sand papering and applying one coat of weather proof exterior paint incl nescessary scaffolding acomplete all as specified and directed.

M&L for preparation of old distempered surfaces of wall and celing applying one coat of oil bound distemper etc complete all as specified and directed.

M&L for Preparation of old distempered surfaces of wall and applying two coat of oil bound distemper complete all as specified and directed.

M&L for complete removal of existing treatment including Washing, rubbing down and stopping etc distembered wall surfaces and M&L for two coats of distemper oil emulsion over a coat of primer including wall care putty to make surface even and smooth, preparatory to distempering, priming plastered and other surfaces on existing plastered surface complete all as specified and directed.

M&L for preparation of old painted surfaces of wood and wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted surfaces of steel & iron of any description over 10cm width or girth and applying one coat of synthetic enamel paint (1st quality) etc complete all as specified and directed.

Dismanting of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

S&F Hollow PVC wall lining consisting of 6 to 8mm thick plain or raised wood grains printed colour PVC sheet in GI frame to level the wall and prelaminated on one face inclusive cornices & side beading of solvent cement complete all as specified and directed.

S&F in repair false ceiling with GRG (glass fibre reinforced gypsum) false ceiling tiles of size 595x595mm of approved texture, design and pattern having moisture content less than 2% humidity resistance of 99%, NRC 0.50 to 0.75 as per IS 8225:1987, Non combusible as per BS 476(part 4) -1970 and light refectance of horizontal level suspended on interlocking meter T- Grid of hot dipped galvanized @120grams per sqm including both sides) comprising of maint T runner of size 15x 32mm of lenth 1200mm and secondary intermediate cross T of size 15x32mm of lenth 600mm to form grid module of ceiling using galvanized mild steel items (galvanizing) @80 grams per sqm) ie 50mm long,8mm outer diameter M-6 dash fastner, 6mm dia fully threaded hanger rod up to 1000mm length and L Shaped level adjusing of size 85x25x2mm galvanised iron perimeter wall angle of size 24x24x0.40mm of lenth 3000mm to be fixed on periphery wall/partition with the help of plastic rawl plugs of 450mm centre to centre and 40 mm long dry wall wood screws. the work shall be carried out as per specifications ,drawings and as per direction of Engr in charge with fully perforated 12mm thick tegular edged or 10mm thick square edged GRG false ceiling complete all as specified and directed

Supply and fixing 12mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface /curved surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh Fillets, metal frame work and G.I. wire mesh complete all as specified and directed.

S&F aluminium (extruded section body) door closer hydraulically regulated, designation No 3 universal type suitable for door shutter of 851 to 1000mm width and fixed and weight between 61 to 80 kg complete all as specified and directed.

Taking down existing aluminium door shutter and S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

Material and labour in repair for Granite(of any type) 18 to 20 mm thick work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade including noising and rounding edges of stone slab complete all as specified and directed.

M&L for in repair industrial designer tiles as in floor and parking area 10mm thick (square/ rectangular) area of each tiles size exc 0.0.9 sqm but N exc 0.16 sqm, as in floors etc., set and jointed in neat cement slurry and pointed colour cement match the existing over and including 20mm thick screed bed as in 1:4 including taking out existing tiles complete all as specified and directed.

S&F poly carbonate/louvers sheet 4-5mm thick over & including 12mm thick plywood fixed with adhesive complete all as specifed complete all as specified and directed.

S&F wall panelling consist of 5x35mm PVC fillet over 12mm thick Marine proof ply over 1mm thick decorative 0.90mm thick lamination including T strip(SS decorative fixed in grooves) complete all as specified and directed.

S&F Speed Bump of length 730x245 Model No DA1006 height 70mm design patient No 206431 of ABS material complete all as specified and directed.

S&F Solar stud Dhruv cat part No DA 110 (Aluminium alloy shell of size 125mmx125mmx125mm material complete all as specified and directed.

M&L for complete removal of existing treatment including Washing, rubbing down and stopping etc distembered wall surfaces of wall/ceiling and applying two coat of Luster paint complete all as specified and directed.

Supply and fixing Glass mossaic tiles on finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge.

Please Enable Macros to View BoQ information