SPECIAL REPAIRS TO BLDG NO. 7/1 AT CIVIL LINES NAGPUR UNDER GE KAMPTEE

Amount

Demolition of cement concrete of any description and in any position not otherwise specifically provided, complete all as specified and directed.

Dismantling floor, heart or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone wall, etc including raking out joints hacking for key, scrubbing down with water etc, complete all as specified and directed.

Dismantling of asbestos cement sheet (corrugated , semi-corrugated etc) sheets in roof coverings, complete all as specified and directed.

Dismantling mild steel work of any description not otherwise provided, complete all as specified and directed.

Dismantling wall and ceiling boards ( Fiber, pulp, insulation etc) or insulation boards, slabs, blankets or of any description in any thickness including cover fillets, complete all as specified and directed.

Dismantling timber scantlings in frame work 40 sq. cm and over in section, in any position , complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in mortar, complete all as specified and directed.

Dismantling of brick work or stone/boulder masonary built in cement mortar including ashlar facing dressed stone and pre-cast concrete articles, complete all as specified and directed.

Taking down door / window frame with shutter of any description (without taking of shutter from the frame ) area not exc 1.5 sqm, complete all as specified and directed.

Taking down door / window frame with shutter of any description (without taking of shutter from the frame ) but area exc 1.50 sqm but not exc 4 sqm, complete all as specified and directed.

Taking down shutters of any description exc 1.00 Sqm but n. exc. 2.00 Sqm, complete all as specified and directed.

Taking down shutters of any description exc 1.00 Sqm but n. exc. 2.00 Sqm and refixing in same opening, complete all as specified and directed.

Dismantling of cast iron, PVC or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required etc, complete all as specified and directed.

Demolition of 150mm dia cement concrete bed in haunching and breaking up drain pipes SGSW set in cement mortar of the following dia, complete all as specified and directed.

Material and labour for 2nd class hard wood in scantling clean sawn and unframed timber, complete all as specified and directed.

Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with cresoat oil, complete all as specified and directed.

Material and labour for TMT bars of 10 mm dia and over cut to length, bent to shape required and binding with mild steel wire (annealed) not less than 0.90 mm etc , complete all as specified and directed.

Material and labour for TMT bars of 8 to 10 mm dia and over cut to length, bent to shape required and binding with mild steel wire (annealed) not less than 0.90 mm in stirrups, spacers and binders, complete all as specified and directed.

Material and labour for cement concrete 1:2:4 type B-I (using 20 mm graded stone aggregate) as in lintels up to 1.5m clear span, cills, steps, seismic bands and other similar bands, parapets, copings, benching, bed plates, kerbs and the like including weathering, slightly rounded or chamfered angles and throating incl waste formwork, complete all as specified and directed.

Material and labour for old size brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6, complete all as specified and directed.

Rendering 15mm thick in cement plaster in cement mortar 1:6 , finished even and smooth without using extra cement , complete all as specified and directed.

Material and labour for dubbing out average 10mm thick on irregular face of walls cement mortar 1:6, complete all as specified and directed.

Material and labour for rendering 10mm thick in cement plaster in cement mortar 1:6 , finished even and smooth without using extra cement, complete all as specified and directed.

Material and labour for 5mm thick rendering CM 1:4 on fair faces of brick work using water proofing compound as per manufacture instruction, complete all as specified and directed. Note: WPC shall be measured separately

Supply only liquid water proofing admixture, complete all as specified and directed.

Material and labour for chequered cement concrete tiles coloured rubber pressed glossy finish of 300 mm x 300mm x 25 mm thick set, laid over and including 20mm thick screed bed or bedding layer in CM 1:6 jointed and pointed in neat cement slurry as in floor with grey cement and no pigment, complete all as specified and directed.

Material and labour for 75mm thick cement concrete type D-2, 1:4:8 (using 40 mm graded stone aggregate) as in sub base, base etc, complete all as specified and directed.

Material and labour for shingle filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled, and blinded with earth and rammed including watering, complete all as specified and directed.

Material and labour for 60 mm thick, M-35 grade, machine pressed precast concrete coloured interlocking paver block (rubberised finish) of any shape and size confirming to IS 15658-2006 laid over, with sand dust cushion or bedding layer, complete all as specified and directed.

Material and labour for colored glazed ceramic tiles in vertical surface 300x 450x 6-7mm thick set and jointed in neat cement slurry and pointed in site or color cement to match including rendering 10mm thick in cement mortar 1:3, complete all as specified and directed.

Material and labour for Cement concrete type B-0 (1:2:4 )25mm thick (using 12.5 mm graded stone aggregate), complete all as specified and directed.

Material and labour for vitrified ceramic tiles 10 mm thick (square or rectangular) polished, light shed area of each tile not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in site or colored cement to match over 15mm cement screed bed in cement mortar 1:4, complete all as specified and directed.

Ditto all as per item No. 33 above, but as in skirting with and including 10mm thick backing coat in CM 1:3, complete all as specified and directed.

Material and labour for joint free colored non skid ceramic tiles 6 to 7 mm thick (square or rectangular) area of each tile exceeding 0.18 sqm but not exc 0.38 Sqm in floors etc set and jointed in neat cement slurry and pointed in site or colored cement to match over 15mm cement screed bed in cement mortar 1:4, complete all as specified and directed.

Ditto all as per item No. 35 above, but as in skirting with and including 10mm thick backing coat in CM 1:3, complete all as specified and directed.

Material and labour for joint free colored non skid ceramic tiles 6 to 7 mm thick (square or rectangular) area of each tile exceeding 0.06 sqm but not exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in site or colored cement to match over 15mm cement screed bed in cement mortar 1:4, complete all as specified and directed.

Material and labour for RCC 1:2:4 Type B1 (using 20mm graded stone aggregate) as in landings, cover slabs, (for man holes etc) and similar articles with plain faces set in cement mortar 1:4, complete all as specified and directed.

Material and labour for 75mm thick cement concrete type B-2, 1:2:4 (using 20 mm graded stone aggregate) for plinth protection and similar work, complete all as specified and directed.

Material and labour for cutting chases, pinning in, making good to facings where required and Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends and cutting chases for water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, complete all as specified and directed.

Material and labour for Roof trusses (framed), trussed, purlins, crane ganb<ies, rails and fastenings and heavy bracket framing (lleam, tee, angle, charnel or flat sections) including distance pieces, cleats etc conforming to IS 1161-1979 grade Fe 290 (Gde E-165), complete all as specified and directed.

Supply and fix framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plate, riveting, etc n.exc 10 kg each brackets, conforming to Fe-290. Gde E-165, complete all as specified and directed.

S & F and 1st class hard wood plain solid straight chowkats & frame wrought framed on the solid rounded or chamfered put together with glue pinned at joints, complete all as specified and directed.

Supply and fix Solid PVC Door Frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening, complete all as specified and directed.

S/F Factory made solid PVC panelled door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails ,MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having PVC sheet strip of 20 mm width struck inside with solvent cement for styles and plain colour PVC sheet for Top rail : panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the style and rail with suitable PVC sheet beading and jointed together with solvent cement etc, complete all as specified and directed.

Supply and fix 35 mm thick flush shutter solid core construction with block board core and plywood face panel commercial type on both faces, complete all as specified and directed.

Supply and fix 35 mm thick plain framed panelled factory made shutter made out of IInd class hard wood rail and styles and panel of 12 mm thick veneered particle board or 9 mm thick plywood with commercial veneering on both faces the size of rail and style as per IS 1083 (part-I) kiln seasoned an chemically pressure treated of any number of panel, complete all as specified and directed.

Supply and fix 30 mm thick first class hard wood for windows glazed and ,skeleton shutter open and prepared to receive glass , gauge etc. (without sash bars), edge of framing plain, chamfered or rounded. Fitted with cut and mitred beads for securing glass etc size of member of shutters as specified in SSR part -I , complete all as specified and directed.

Material and labour for Prelaminated particle board 12mm thick interior grade laminated one side with decorate choice lamination and other side balancing white lamination, fixed with screw to timber frame work in wall , complete all as specified and directed.

Material and labour for 10mm thick Bison Panel made of cement bonded particle boards, fixed with screw to frame work , complete all as specified and directed.

Supply and fix for 150 mm aluminium handles cast type anodised, complete all as specified and directed.

Supply and fix for 150 mm Extruded brass handles, fabricated type polished, complete all as specified and directed.

Supply and fix for 300 mm aluminium anodised sliding door bolts, with hasp, clips of sheet, cast or extruded section and fixing bolts and sections or cast -aluminium alloy and fixed, complete all as specified and directed.

Supply and fix for 300 mm brass sliding door bolts, with hasp, clips of sheet, cast or extruded section and fixing bolts and sections and fixed, complete all as specified and directed.

Supply and fix for 150mm floor door stopper of anodised aluminium alloy fixed, complete all as specified and directed.

Supply and fix for 100mm brass fancy type handle cast type , complete all as specified and directed.

S & F 150 mm long aluminium anodised, barrel tower bolt of extruded section , complete all as specified and directed.

S & F 150 mm long brass , with cast or sheet barrel and rolled or cast bolts, complete all as specified and directed.

Supply and fix mild steel medium weight could roll 100mm size butt hinges, complete all as specified and directed.

Supply and fix Curtain rod single/double with a telescoping brackets to fit both rod and mounting hardware modular type, complete all as specified and directed.

Supply and fix Powder coated annodized aluminium frame for doors,window,ventilator with one or more rebates including joining cleat for fixing etc, complete all as specified and directed.

Supply and fix Anodised aluminium(powder coated) window and ventilator shutters, side hung type/Sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.), complete all as specified and directed.

Supply and fix aluminium (powder coated ) three track sliding window comprising of one fly proof shutter and two glazed shutters with frames of size 92.0mm x 31.75mm x 1.30mm thick and shutter frames of size 40mm x 18mm x 1.55mm thick with necessary joining cleats, glazing clips, rubber gasket, anodised aluminium snap beading and connected locking arrangement complete all as per manufacturer's catalogue and specifications , complete all as specified and directed. Notes : (i) Glass filling in panels of windows and aluminium wire mesh/wire cloth shall be deemed to be included in the quoted rate for the item; (ii) Aluminium alloy wire cloth in panels of wire gauzed shutter shall be 0.45 mm nominal dia of wire and avg width of aperture 1.40 mm, fixed with aluminium wire staples; (iii) Glass filling in panels of glazed shutter shall be 4 mm thick tinted sheet glass of approved make and shade/tint Make of Aluminium Sections powder coated : Jindal or equivalent of JINDAL

Supply and fix 3 mm thick sheet glass ordinary quality n.exc 0.50 sqm each pane and fixed with oil putty in square etc, complete all as specified and directed.

Supply and fix 4 mm thick tinted glass and glazing with rubber beading and aluminium glazing bar in each panel, complete all as specified and directed.

Supply and fix framed work such as grills ,guard bars with mild steel Square bars with ends of bars shouldered and/ or riveted and similar work confirming to FE 290 Gde-E-165, complete all as specified and directed.

S& F Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm as in gauze door /window/ventilators shutters, complete all as specified and directed.

Supply and fix GI framework for seamless ceiling of size 600mm x 600 mm comprising of hot deep galvanized powder coated perimeter angle 0.43 mm thick of size 24x24 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre, main runner Tee section 0.4 mm thick with height 38 mm and cross Tee 0.3 mm thick with height 28 mm suspended with plack lining in mid section from soffit at approx 1200 mm centre to centre with GI cleat and steel expansion fasteners, including drilling holes for 4mm dia GI wire suspender and clips etc complete as per manufacturer's recommendations , complete all as specified and directed. Note: (i) Ceiling boards shall be measured separately. ii) The grid system shall be as per specifications of make as specified and directed.

Material and labour for Non asbestos fibre cement building boards of size 595x595x4mm fixed or laid/inserted to GI frame work as in ceiling laid flat or sloping, complete all as specified and directed. Note: - GI frame work will be measured and paid for separately.

Supply and fix Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

Supply and fix Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

Supply and fix GI tubing 15 mm bore medium grade with all fittings and fixed to wall including taking up or down existing GI tubing , complete all as specified and directed.

Supply & fix GI tubing 20 mm bore medium grade with all fittings and fixed to wall including taking up or down existing GI tubing , complete all as specified and directed.

Supply and fix Rotational moulded polyethylene water storage tanks ( triple layer cylindrical vertical with closed top)of 1000 litres capacity hoisted and fixed in position and including dismantling water tank and removing from site, complete all as specified and directed.

Supply and fix Rotational moulded polyethylene water storage tanks (triple layer cylindrical vertical with closed top)of 500 litres capacity hoisted and fixed in position and including dismantling water tank and removing from site, complete all as specified and directed.

Supply and fix in repairs 20 mm bore PTMT ball valve, high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule, complete all as specified and directed.

Supply and fix in repairs vitreous china wash down water closet ( pedestal pattern) 'P' or 'S' trap including jointing including plastic water closet seat, closed pattern with flat bottom and cover and mild steel CP or aluminium hanging device, complete all as specified and directed.

Supply and fix in repairs Plastic water closet seat, black/ white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hanging device, complete all as specified and directed.

Supply and fix in repairs Bowl for Coupled WC with PP normal close slim seat cover, Hinges, Fixing accessories and accessories Set, size 395X680X770mm, P/s Trap-180mm/ 220mm (Essco by Jaquar Cat No AIS-WHT-101751NSN/AIS-WHT-101751NPS) and cistern with cistern fittings (Essco by Jaquar Cat No - AIS-WHT-101201) Essco by Jaquar or equivalent as specified in makes.

Supply and fix in repairs Vitreous china wash basin, size 475x360x130mm, Table top Basin on granite platform or table complete all as specified and directed. Make Essco by Jaquar (Cat No-AIS-WHT-101901) or equivalent, as specified in makes.

Supply and fix in repairs Single lever basin Mixer without Popup waste with 450mm long Braided Hoses all as specified and directed. Make : Essco by Jaquar (Cat No:APR-101011B) or equivalent, as specified in makes.

Supply and fix in repairs 2 way bib cock with wall fange complete all as specified and directed. Make : Essco by Jaquar (Cat No:APR-101041) or equivalent as specified in makes.

Supply and fix in Repairs Angular Stop Cock with wall Flange complete all as specified and directed. Make : Essco by Jaquar (APR-101053) or equivalent as specified in makes.

Supply and fix in repair Overhead shower 125 mm dia round shape Single flow (ABS body chrome Plated with Gray Face Plate) with Rubit cleaning System incl Arm 240mm long complete all as specified and directed Make : Essco by Jaquar (Cat No- EOS-542A & ALE-536A) or equivalent as specified in makes.

Supply and fix Hand shower (health Faucet) (ABS body) with 8mm dia, 1.2 Meter long Flexible tube & wall Hook complete all as specified and directed. Make : Essco by Jaquar (Cat No ALE-ESS-593) or equivalent as specified in makes.

Supply and fix in repairs Wall mixer with provision for Overhead Shower with 115mm Long bend pipe on Upper Side, connecting Legs & wall Flanges, complete all as specified and directed. Make : Essco by Jaquar (Cat No:APR-101273) or equivalent as specified in makes.

Supply and fix Towel ring square fixed to walls with chromium plated (CP) brass screws, complete all as specified and directed. Make Essco by Jaquar (AEC-1121) or equivalent as specified in makes.

Supply and fix Single Towel Rail 600mm Long, Stainless steel fixed to walls with chromium plated (CP) brass screws, complete all as specified and directed. Make Essco by Jaquar (AEC-1111) or equivalent as specified in makes.

Supply and fix Towel Rack 600mm long with lower Hangers, Stainless Steel fixed to walls with chromium plated (CP) brass screws, complete all as specified and directed. Make Essco by Jaquar (AEC-1181) or equivalent as specified in makes.

Supply and fix Glass Shelf 600mm long fixed to walls with chromium plated (CP) brass screws, complete all as specified and directed. Make Jaquar (ACN-CHR-1171N) or equivalent as specified in makes.

Supply and fix Corner glass Shelf (with Bracket) fixed to walls with chromium plated (CP) brass screws, complete all as specified and directed. Make Jaquar (.ACN-CHR-1173) or equivalent as specified in makes.

Supply and fix Soap dish (polycarbide) fixed to walls with chromium plated (CP) brass screws , complete all as specified and directed. Make Essco by Jaquar (AEC-1133) or equivalent as specified in makes.

Supply and fix Toilet Paper holder fixed to walls with chromium plated (CP) brass screws, complete all as specified and directed. Make Jaquar (AEC-1151) or equivalent as specified in makes.

Supply and fix waste coupling 32mm size half Thread with 130mm height brass CP with long screwed shank and fly nut, flanged end, complete all as specified and directed. Make Jaquar (ALD-CH-709L130) or equivalent as specified in makes.

S & F in repairs sink cock with swinging Spout (wall mounted Model) with wall flange, complete all as specified and directed. Make : Essco by Jaquar (Cat No:APR-103347N) or equivalent as specified in makes.

Supply and fix in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with pIngs including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mmx330mmx160mm, complete all as specified and directed.

S & F in repairs 15 mm bore chromium plated bib taps, cast copper alloy, Fancy type, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

Supply and fix in repair brass CP fancy type 15mm bore pillar tap, complete all as specified and directed.

Supply and fix in repairs 15mm dia brass C.P fancy Type stop valves, complete all as specified and directed.

S & F PVC connections 15 mm size with PTMT nuts of length 450 mm, complete all as specified and directed.

Supply and fix in Repairs 32mm Waste fittings, brass, chromium plated for glazed are sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and directed.

Supply and fix in repair brass chromium plated shower rose 125mm size , complete all as specified and directed.

Supply and fix grating dome 100mm dia of PTMT (Min weight 25 gms), complete all as specified and directed.

Supply and fixing repairs floor trap 75 mm dia with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1, complete all as specified and directed.

S & F in repairs 10 ltr cap PVC valve less symphonic action type flushing cistern low level, white with inlet ball valve float and handle including bracket etc, complete all as specified and directed.

Supply & fixed in repairs Wash Hand basin with vitreous china pedestal ( flat back or angle back )of size 550 X 400 MM white including , waste pipe, chain and plug, porcelain stopper including for & pinning in ends of brackets including supply & fixing of waste pipe , complete all as specified and directed.

Material and labour for pre- polished granite slab machine cut of any shade as approved by GE of 15 to 20 mm thick including necessary notching, chamfering the edges over cement screed bed including Cutting, Grinding and Mirror polishing(Granite finish) with suitable grinding stones , complete all as specified and directed.

M & L for machine cut cudappa stone slab 20 - 25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing , complete all as specified and directed.

Rounding to edges of stone slabs one edge , such as in steps ,cooking platforms, and other similar situations, complete all as specified and directed.

Supply and fix PVC (SWR) bends any radius of 75mm bore , complete all as specified and directed.

Supply and fix PVC (SWR) bends any radius of 110 mm bore, complete all as specified and directed.

Supply and fix PVC (SWR) vent cowl of 110mm bore, complete all as specified and directed.

Supply and fix PVC (SWR) pipes single socketed in any length with rubber ring joints fixed in floor/wall 75mm bore, complete all as specified and directed.

Supply and fix PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor 110mm bore, complete all as specified and directed.

Supply and fix in repairs 32mm bore of pipe of low density polyethylene pipe (LDPE) of pressure rating 6kgf/Sqcm fixed , complete all as specified and directed.

Supply and fix in repairs 40mm bore of pipe of low density polyethylene pipe (LDPE) of pressure rating 6kgf/Sqcm fixed , complete all as specified and directed.

Material and labour for concrete bed to drain pipes for 150mm dia pipe including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C2, complete all as specified and directed.

Material and labour for Salt glazed stoneware drain pipe 150mm dia laid in trenches and jointed , complete all as specified and directed.

Supply and fix in repairs 18mm thick block board grade-I quality exterior grade commercial type fixed with screw to timber frame work with beading as required , complete all as specified and directed.

Material and labour for 0.90mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions, complete all as specified and directed.

Preparation of newly steel surfaces of any description over 10 cm width or girth & applying two coats synthetic enamel paint over a coat of red oxide primer , complete all as specified and directed.

M & L for preparation of old steel surfaces of any description over 10 cm width or girth & applying two coats of synthetic enamel paint , complete all as specified and directed.

Material and labour for preparation of old wooden surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint , complete all as specified and directed.

Preparation of newly wooden surfaces of any description over 10 cm width or girth & applying two coats synthetic enamel paint over a coat of primer, complete all as specified and directed.

M & L for preparation of new surface of wall and applying two coats of oil bound distemper over a coat of Birla white care putty, complete all as specified and directed.

M & L for complete removal of existing treatment of walls and applying two coats of oil bound distemper over a coat of Birla white care putty , complete all as specified and directed.

Material and labour for complete removal of existing treatment and preparation of surfaces and applying two coats of cement base paint over a coat of primer, complete all as specified and directed.

Material and labour for Preparing new plastered surface and applying two coat cement base paint over a coat of primer, complete all as specified and directed.

Material and labour for preparation of old /new wooden surface by rubbing surface/burning old paint and polishing on surfaces of any description, width or girth including cleaning and preparing the surface, complete all as specified and directed.

Supply and installation of modular kitchen setup for below the granite top kitchen otta (up to 0.80M height). Framing of partition in aluminium pipe of 25x50mmx1mm thickness for fixing shutters and drawers units. Teak wood pattern pipe frame fixed with L-shaped ss angles. All drawers units must be of' Hitech/Bluestar/Hefele' make raft closing system. All the facia for drawers units and shutters should be made of 18mm thick calibrated BWR grade seasoned plywood with matt finish /high gloss laminate 1mm thick on outside and 0.8mm thick laminate at inner side. Edge Should be fitted with 1.00mm thick edge band on all shutters and drawers facia incl all fittings and water proofing sheet below granite, rate include, complete all as specified and directed. Note: Rate include followings (i) Plate basket with inlet (21' x 20' x 4'' x 1 Nos) , (ii) Thali Basket with Inlets (21' x 20' x 8'' x 1 Nos) (iii) Cargo cutlery basket as per requirement, (iv) Plain Basket (21' x 20' x 4'' x 1 Nos), (v) Cup and saucer Basket with inlet ( 21' x20' x4' x 2 nos), (vi) Plain Basket (21' x 20' x 6''/8'' x 4 Nos), (vii) Bottle Pull out2 tier x 1 Nos, (viii) V channel handle must be provided to all openable shutter and drawer, (ix) 01 nos dustbin unit and 01 nos cylinder unit. Size and Nos of Basket may be changes as per Engineer In Charge.

Supply and fix Overhead cabinate should be of 450mmm wide and 600mm height made from 18mm thick BWR grade calibrated plywood. Outside it should be fitted with 1.0mm thick matt finish /high gloss laminate and inside surface should be fixed with 0.8mm thick Matt finish /high gloss laminate. All edges should be fixed with 0.8mm thick edge band length of the cabinate should be divided with partition of plywood as per requirement. and 10/12mm glass shelf with bracket as per requirement. Overhead cabinate shutters should be open on side with auto closing hinges. Length of overhead cabinate can be extended to any length as per requirement. Note: V -channel handle must be provided to all over head cabinate shutter, openable shutter and drawer units below otta level , complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground, complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.

Material and labour for mild steel of Hand rail, half round or other stock section or core of wooden hand rail straight portion drilled and countersunk for baluster, nosing to steps including embedding in concrete and screwing etc .wind tie for roof including securing bolt post and strut in fencing including cutting tops to shape as drilled holes notching for wire etc flat iron fillets(for securing wire mesh etc) including all necessary drilling bolting or reviting etc and similar work, complete all as specified and directed.

Supply and fix 5mm to 10mm dia Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, but length of bolt exc 5cm and n exc 10 cm long, complete all as specified and directed.

Material and labour for plain cement concrete in foundations, and mass filling type D2 1:4:8 (using 40mm graded stone aggregates), complete all as specified and directed.

Material and labour for formwork to sides of concrete of foundation, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work , for flat and fair finished surfaces, complete all as specified and directed.

Fixing only chain link, MS galvanised fencing, any size of type including line wires, any mesh, size and type to any type of standard, rails, straining bolts etc including provision of binding wire , complete all as specified and directed.

Supply only mild steel galvanised chain link fencing nexc 4.00 kg/sqm of any size or type, complete all as specified and directed.

Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed, complete all as specified and directed.

Taking down unserviceable point wiring with copper/aluminium conductor cable of (light, fan, plug and power plug point) complete including light fittings any type switches, sockets, ceiling rose, switch boards, bell/buzzer, bell push, tube light fittings, regulator etc, and making good disturbed surfaces of walls/floor etc to match with existing surfaces including white/ colour washing/distempering, complete all as specified and directed.

Taking down carefully unserviceable sub main wiring of any size/capacity and making good disturbed surfaces to match with the existing surfaces, complete all as specified and directed.

Taking down sheet metal enclosure with MCB's ,main switch, etc., and making good the disturbed surfaces of wall, complete all as specified and directed.

Material and labour for concealed point wiring 1100 volt grade single core PVC FRLSH insulated and unsheathed cable with multi-stranded copper conductor 1.50 Sqmm drawn in with and including electrical grade PVC conduit not less than 20 mm dia with IS 9537 (Part-III) 1983 marking, medium grade concealed on wall/ceiling as per site requirement including PVC FRLSH insulated and unsheathed cable with copper conductor of size 1.50 Sqmm as earth conductor and pressed steel terminal boxes sunk on wall for mounting modular switches, switch sockets. fan regulator, etc including modular cover with frame of any size, including making good the disturbed surfaces , complete all as specified and directed for:- (a) One light point controlled by one No. one way switch. Note: Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly.

Ditto all as per item No. 145 above but, One Ceiling/Exhaust fan point controlled by one No. one way switch and regulator.

Ditto all as per item No. 145 above but, One 3 pin 5 amps socket out let point on the same board with other switches .

Ditto all as per item No. 145 above but, One 3 pin 5 amps socket out let point on independent board.

Ditto all as per item No. 145 above but, One bell/buzzer point controlled by one push button.

All as per item No. 145 here in before, but wiring with 4.0 Sqmm multi stranded copper conductor cable and earth wire with copper conductor cable of size 4.0 Sqmm for 15 Amps power plug point on independent board.

Material and labour for sub main wiring with two single core PVC FRLSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit heavy duty of suitable size with all accessories such as Junction box, bend, tee, elbow etc., concealed in walls / ceilings of the following sizes :- (a) 2 x 4.0 Sqmm + 1 x 4.0 Sqmm earth wire. Note: Accessories for point / sub main wiring like PVC junction box, bend, Tee, Elbow shall be of same make.

Ditto all as per item No. 151 above, but 2 x 6.0 Sqmm + 1 x 6.0 Sqmm earth wire, complete all as specified and directed.

Supply and fix modular switch 1 way 6 Amps 250 Volts AC, 1 Module, complete all as specified and directed. Make: Anchor/ Roma/Legrand/Hagger/Crabtree

Supply and fix modular switch 1 way 32 Amps 250 Volts AC, 2 Module, complete all as specified and directed. Make: Anchor/ Roma/Legrand/Hagger/Crabtree

Supply and fix modular socket 2/3 pin combined 2 module 6 Amps 250 Volts AC, complete all as specified and directed. Make: Anchor/ Roma/Legrand/Hagger/Crabtree

Supply and fix modular socket 2/3 pin combined 2 module 6/16 Amps 250 Volts AC, complete all as specified and directed. Make: : Anchor/ Roma/Legrand/Hagger/Crabtree

Supply and fix modular bell push 1 way 6 Amps 240 Volts AC, 1 Module, complete all as specified and directed. Make: : Anchor/ Roma/Legrand/Hagger/Crabtree

Supply and fix modular ceiling fan regulator step type 120W, 2 module, complete all as specified and directed. Make: : Anchor/ Roma/Legrand/Hagger/Crabtree

Supply & fix electric bell, ding dong AC 230 volts, single pole, complete all as specified and directed.

Supply & fix ceiling rose, 3 phase / PVC/ polycarbonate, isolated body surface, complete all as specified and directed.

Supply and fix LED batten fittings 18/20 Watts, including drivers having energy consumption, 230 Volts, 50Hz, 6500K, not less than 800 Lumen prewired complete with all accessories, , with and including LED tube rod, connecting up with twin core twisted flexible copper conductor cable of suitable size from fitting to ceiling rose, complete all as specified and directed. Make:Philips:Slim line 18W or CG: LCTL-18-CDL or BLTRU 20W NW VIVA of Bajaj/ Phillips.

Supply and fix LED batten fittings 9/10 Watts, including drivers having energy consumption, 230 Volts, 50Hz, 6500K, not less than 800 Lumen prewired complete with all accessories, , with and including LED tube rod, connecting up with twin core twisted flexible copper conductor cable of suitable size from fitting to ceiling rose, complete all as specified and directed. Make:Philips:Slim line 9W or CG: LCTL-9-CDL or Surya: SLE BT 10W.

Supply and fix Highly efficient direct-indirect recessed LED ceiling tile high transmittance, micro linear frosted (MLF) PMMA curved diffuser provides glare free light suitable for 600mm x 600mm modular ceiling LED fittings 36 Watts, complete with all accessories, rated voltage 240 Volts, with and including LED lights, connecting up with twin core twisted flexible copper conductor cable of suitable size from fitting to ceiling rose, complete all as specified and directed. Make: CG: LCPL-36-CDL(2X2) or Surya Celesta SLE DS 36/40R Philips: RC 381B LED36S-6500 G3 PSU OD/Bajaj: Cat No.BCTBLR 36 ZT NW/ Wipro.

Supply and fix building security light LED 25/ 30 Watt with pressure die cast aluminium housing heat resistance toughened glass, IP66 protection, complete with driver with rated voltage 240 V, 50Hz, with and including mounting GI pipe (made out of 25mm dia light grade pipe) 1.2m bent to the required shape fixing with FI clamps nut bolts etc., and connecting up with twin core twisted flexible copper conductor cable of suitable size of 230V, 50Hz from fitting to ceiling rose, complete all as specified and as directed. Make:Philips:BRP 020 or CG: Freedom LSTS-30-CDL or Bajaj or Wipro

Supply and fix sheet metal enclosure Triple pole & neutral for 415 volts 4 way with 200 Amp rated bus bar flush /surface mounting double door, complete all as specified and directed. Make- Legrand/ L&T/ Schenider/ Siemens

Supply and fix sheet metal enclosure single pole & neutral for 240 volts 8 way with 200 Amp rated bus bar flush /surface mounting double door, complete all as specified and directed. Make- Legrand/ L&T/ Schenider/ Siemens

Supply & fix MCCB 4 Pole, 40 Amps, 16KA, 415Volts with sheet metal enclosure flush / surface mounting, with and including necessary connection between incoming / out going with suitable size lugs , glands, 10 Sqmm x 4 Core multistranded FRLSH copper conductor cable, complete all as specified and directed.

Supply and fix MCB triple pole and neutral 415 volt 40 to 63 amps 10 KA, complete all as specified and directed. Make- Legrand/ L&T/ Schenider/ Siemens

Supply and fix MCB single pole and neutral 240 volt 6 to32 amps 10 KA, complete all as specified and directed. Make- Legrand/ L&T/ Schenider/ Siemens

Supply and fix MCB single pole 240 volt 6 to 32 amps 10 KA, complete all as specified and directed. Make- Legrand/ L&T/ Schenider/ Siemens

Supply and fix Ceiling fan 1200mm sweep 230 Volts, 50Hz and connecting up with twin core twisted flexible copper conductor cable of suitable size from fitting to ceiling rose, complete all as specified and directed. Make: Bajaj/CG/Orient/Havells.

Supply and fix Exhaust fan 250 mm sweep, single phase, 230 Volts, 50Hz, with nut and bolts, washers etc., and connecting up with twin core twisted flexible copper conductor cable of suitable size from fitting to ceiling rose, , complete all as specified and directed. Make: Bajaj/ CG/ Havells/Orient

Supply and fix Air circulator fan 450mm sweep, single phase, 230 Volts, 50Hz, suitable for wall mounting and connecting up with twin core twisted flexible copper conductor cable of suitable size from fitting to ceiling rose, , complete all as specified and directed. Make: Bajaj/ CG/ Havells/Orient

Material and Labour for Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground vertically to a depth not less than 2.25m below ground level with top edge of earth plate not less than 1.5m below ground level connected to galvanized iron earth lead wire 4.00mm dia by means of bolts, nuts, check nuts, washers of galvanized iron and connected to main switch/control board upto 7.5m away from the earth electrode including excavation earth work, PCC chamber, RCC cover slab char coal, watering pipe, wire mesh lugs, earth lead protection pipe 40mm bore, medium grade 7.5m long as applicable and as per plate No.5 of SSR Part-I 2009 and all as specified. (a) Excavation and earth work in any type of soil. (b) Drilling of holes in electrode (c) PCC pit in cement concrete (1:2:4) type B-1 (d) 40 mm thick Pre-cast RCC cover or reinforcement with 8mm TMT bars at 100mm c/c both ways with suitable handle. (e) Funnel with watering pipe of GI 20 mm nominal bore ,medium grade & copper lug etc. (f) 15mm nominal bore medium grade GI protection pipe upto 7.50 m long for protection of earthing lead. (g) Requisite quantity of charcoal and common salt. (h) Connection to earthing test point and testing on completion.

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50 metre depth for foundation or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sqm on plan, laying of cables/pipes/poles etc., and getting out in Soft/Loose soils, complete all as specified and directed.

Returning filling in, including spreading, levelling watering and well ramming in layers not exc 25 cms thick with soil , complete all as specified and directed.

Removing excavated materials to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point , complete all as specified and directed.

Supply and fix Double wall Corrugated High Density Polymer Ethyl (HDPE) pipe of size 50mm outer diameter and 38mm inner diameter with IS 14930 (Part-2):2001, laid in trenches/floors and fixed on walls/poles, with and including necessary fittings such as bends, sockets and other connected accessories etc., for laying of electric cables, , complete all as specified and directed. Make: Dura line/Tijaria/REX/Ketron.

Supply, laying & testing of LT XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured earthed electric power cable (heavy duty) with aluminium conductor of cross sectional area 50 Sqmm, 3.5 Core.1100 Volts grade suitable for earthed system, laid in trenches / passing though HDPE/ GI pipe / fixed along wall / on pole , complete all as specified and directed. Note: Excavation and Earthwork, HDPE/GI pipe for protection of cable shall be measured and paid separately under relevant items.

Ditto all as per item No.179 above, but cable size 10 sqmm 4 core, complete all as specified and directed.

Supply & fix LED Bollard fittings inverted pyramid tripod with soft 360 degree light and IP 65 protection including drivers, complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable of suitable size of 230V, 50Hz from fitting to junction box fitted with PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate), as in coping of poles, including necessary form work weathering slightly or chamfered angles, throuting exposed surfaces finished even and fair,structure, complete all as specified and as directed. Make: Bajaj : Cat No. BOS 600W 9W LED or Philips: BCP 400 LED 05 PCW PSU GRS1.or CG Cat No. LBLSR-10-CDL.

Supply & Fix thermoplastic cable junction box IP 55/IP65 with metric knockout for cable entry of size 200 x 160 x 98mm fixing on poles with 30 x 5mm MS flat iron clamps, nut & bolts, washers, terminal block and glands, suitable for 16 Sqmm core cable, with and including MCB SP 6-32Amps , complete all as specified and directed. Make: Sintex/Hensel/Nepture.

Supply & fix LED post top made out of aluminium spigot housing with decorative opel acrylic diffuser and IP 65 protection including drivers, complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable of suitable size of 230V, 50Hz from fitting to DB, complete all as specified and directed. Make: Bajaj : Cat No. BRIL 40W LED MW or CG: LPTO-40-CDL/M.

NOTE :- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.80,781.00/- ]

M/s Jagdish Staioners and General Stores

M/s Rahul Traders

M/S L M Chourasia

Bidder Name

M/S L M Chourasia

M/s B S Jain

M/s Rahul Traders

M/s Jagdish Staioners and General Stores