Balance work of two numbers of toilet bloxk in mulbery nursery at Udhampur of sericulture department

Amount

Engagement of Labour for leveling of ground including removing of boulders , brick bats and surplus material dumped inside and disposal of material.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - all work up to plinth level in 1:4:8( 1 cement:4 Coarse sand :8 graded stone aggregate 40 mm nomnial size) . Crushed.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work upto plinth level. 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) Crushed.

6 mm thick cement plaster to ceiling of mix 1:3 (1 cement :3 fine sand )

15 mm cement plaster on the rough side of single or half brick wall of mix . 1:6 ( 1 cement: 6 fine sand)

Making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 ceement : 3 coarse sand : 6 graded stone aggretate 20 mm nominal size) over 75 mm bed of dry brick ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. Crushed.

Providing and fixing cermic glazed floor tiles 300x300 mm thickness to be specified by the manfactures) of Ist quality conforming of IS 13555 OF NITCO,ORIENT , SOMANY, KAJARIA or equivalent make in colour such , as white, lvory, Grey, Fume Red Brown laid on 20 mm thick bed of cement Mortar 1:4(1 cement:4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete .

Providing and fixing Ist quality ceramic glazed tiles conforming to IS; 13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour , shades except begundy , bottle green, black of any size as approved by Enginers- in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 ( 1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing fly proof galvanised M.S. wire gauze to windows and clerestory windows using galvanised M.S. wire gauge with average width of aperture 1.4 mm in both directions with wire of ida. 0.63 mm all complete. With 2nd class teak wood beading 62x19mm.

Providing and fixing aluminum Handles ISI marked anodised (anodic coating not less grade AC 10 as per IS: 1868) transparent or dyed with nuts and screws etc. complete (125 mm)

Providing and fixing aluminum Silding door bolts ISI marked anodised ( anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour and shade with necessary screws etc. complete (300x16)

Providing and fixing aluminum Tower bolts ISI marked anodised (anodic coating not less grade AC 10 as per IS: 1868) transparent or dyed with nuts and screws etc. complete (200x10mm)

Providing and fixing aluminum Door Stoppers ISI marked anodised ( anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour and shade with necessary screws etc. complete(Twin Rubber Stopper)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on new work over an under coat of suitable shade of ordinary paint of approved brand and manufacture.

Colour washing such as green blue or buff to give an even shade. New work ( two or more coats ) with a base coat of white washing with lime.

Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast iron P or S trap 10 litre low level P.V.C. flusing cistern including flush pipe ( of approved make) Manually controlled device ( handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. Long pan pattern white viteous china W.C. pan of size 580mm.

Providing and fixing white vitreous wash basin including making all connections but excluding the cost of fittings. Flat back wash bain of size 550x400mm.

Providing and fixing white vitreous china pedestal for wash bain completely recessed at the back for the reception of pipes and fitings.

Providing and fixiing PTMT waste coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm of 79 mm length and 62 mm breadth weighing not less than 45 gms.

Providing and fixing uplasticised PVC connection pipe with brass unions. 30 cm length.

Providing and fixing PVC waste pipe for sink or wash basin including P.V.C waste fitting complete. 40 mm dia.

Providing and fixing C.P brass angle valve for basin mixer and gyser points of approved make conforming to I.S : 8931. 15 mm nominal bore.

Providing and fixing PTMT grating of approved quality and colour. Circular type 100 mm nominal dia.

Providing and fixing C.P brass long nose bib cock of approved quality conforming to IS standards and weighting not less than 810 gms. 15 mm nominal bore.

Providing and fixing PTMT soap dish holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fitting arrangements, weighting not less than 106 gms.

Providing and fixing mirror of superior glass of approved quality and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing. Rectangular shape 453x357mm.

Providing and placing on terrace ( at all floor levels) polyethylene water storage tank ISI : 12701 marked including the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank ( Sintex, Electroplast, Star, Lotus or equivalent having valid ISI License).

Providing and fixing G.I. pipes complete with G.I. fittings and clamps including cutting and making good the walls. Etc. (Internal work exposed on walls) 15 mm dia nominal bore. Medium.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps including cutting and making good the walls. Etc.(Internal work exposed on walls) 20 mm dia nominal bore. Medium.

Construction of brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) R.C.C top slab with 1: 2:4 Mix( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1 : 3 ( 1 cement : 3 coarse sand ) finished with floating coat of neat cement and making channels in cement concrete 1: 2: 4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standad design.Inside size 90x80 cm and 45 deep including C.I. over with frame ( light duty) 455x610mm . internal dimension. Totoal weight of cover and frame to be not less than 38 kg ( wight of cover 23 kg and weight of frame 15 kg) With F.P.S. bricks with class designation 75 & with Crushed stone aggregate.

Providing /fixing of PVC floor traps

providing /fixing of PVC door bend

Wiring for light points /fan points exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with modular switch, modula plate, sutiable GI box and earthing the point with 1.5 sq.mm FR:S PVC insulated copper conductor single core cable etc. as required. Group A.

Carriage of Material by Machenical Transport including Loading , unloading & stacking at site complete.

Sand (av.distance of 20 km)

Crushed aggregate upto 40mm (av.distance of 20 Km)

SUBASH CHANDER MAGOTRA