PROVN OF TOILETS AT RANGE AND WORK SERVICES REQUIRED FOR AWS AND CERTAIN MINOR WORKS AT AF STATION TAMBARAM

Amount

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed

Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth for foundation, manholes etc and getting out in hard/dense soil

M&L Plain cement concrete, 1:4:8, type D2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. fair finished surfaces all as specified and directed

Formwork to soffits of suspended slabs (flat/curved) such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and as directed

S&F TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed

All as per Sl.item No. 07 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders.

M&L RCC 1:1.5:3, using 20mm graded stone aggregate as in slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like compplete all as specified and as directed

M&L Reinforced cement concrete 1:1.5:3 ,using 20mm graded stone aggregate, as in beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and as directed

M&L brick work with using fly ash bricks, straight or curved on plan exc 6M mean radius built in CM 1:4 all as specified and directed.

M&L Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls,built in CM 1:4, complete all as specified and as directed

M&L Rendering 10mm thick on fair faces of brick work or concrete as in internal plaster with in CM 1:6 , finished even and smooth without using extra cement complete all as specified and as directed

M&L Rendering 5mm thick in CM 1:3 on fair faces of brick work or concrete surfaces of ceiling finished fair and even complete all as specified

M&L Hardcore of broken stone or boulders of gauge not exc. 63mm, deposited, spread and levelled in layers not exc. 15cm thick, watered and rammed to a true surface complete all as specified and as directed

M&L Plain cement concrete, 75mm thickness, type D2, 1:4:8 ,using 40mm graded stone aggregate as in sub base complete all as specified and as directed

M&L Plain cement concrete type B-1, 1:2:4 using 20mm graded stone aggregates as in floor finishes, 25mm thickness complete all as specified and as directed

M&L Screed bed or bedding layer of cement mortar 15 mm thick in CM 1:6 for laying floor finishes etc complete all as specified and as directed

M&L Joint free Non - skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.16 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed

M&L Rendering 10mm thick in cement mortar 1:4 as in backing coat of skirting/dado etc complete all as specified and as direccted

M&L Joint free Glazed coloured ceramic tiles in vertical surface area of each tiles exc 0.11 but not exc 0.18 sqm set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed

M&L Plain cement concrete, 75mm thickness, type C2, 1:3:6 using 40mm graded stone aggregate as in plinth protection including necessary formwork finishing even and smooth with using extra cement complete all as specified and as directed

M&L Preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed

M&L Preparation of new plastered surfaces and applying three coats of white wash on ceiling complete all as specified and as directed

M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces as in external plaster with in CM 1:6 , finished fair and even complete all as specified and as directed

Supply only Liquid water proofing compound

M&L Preparation of new plastered wall surfaces and applying two coats of cement based paint over a coat of primer complete all as specified and as directed

S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) complete all as specified and directed

S&F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face fiixing in frame at site as per specification & drawing complete all as specified and directed

S&F Aluminium anodised,200mm long barrel tower bolts of extruded section and fixed complete all as specified and as directed

S&F Aluminium alloy, anodised,sliding door bolt of 250mm long with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed

S&F Extruded aluminium alloy handles,150mm long fabricated type, anodised complete all as specified and as directed

S&F Butt hinges 100mm, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed

S&F in PVC (SWR) bends with access door any radius 110mm bore complete all as specified and as directed

M&L Returning, filling in hard dense soil, including spreading, levelling, watering and well ramming in layers not exc 25 cm.complete all as specified and directed

M&L Removing excavated material of hard dense soil not exc. 50m and depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and directed

M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed

S&F three layered rotational moulded polyethylene water storage tanks 1000 lit capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed

S&F in 25mm bore Ball brass valves,high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed

S&F in 20mm gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed compete all as specified ans as directed

S&F UPVC tubes medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors 25mm bore.

S&F UPVC tubes medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors 20mm bore.

S&F UPVC tubes medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors 16/15mm bore.

S&F in PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed

S&F in PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed

S& F in PVC (SWR) junction single' T' 75mm bore with access door equal or unequal.

S&F in PVC (SWR) bends with access door any radius 75mm bore

S&F in PVC (SWR) bends with access door any radius 110mm bore

S&F in CP floor trap 100mm with grating including jointing with solvent cement complete all as speccified and as directed

S&F PVC (SWR) vent cowl 75 mm bore

S&F PVC (SWR) vent cowl 110 mm bore

S&F in PVC (SWR) bends (Plain) any radius 110mm bore

M&L Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed

M&L Screed bed or bedding layer of mortar 20 mm in CM 1:6, thick for laying floor finishes complete all as specified and as directed

M&L for PVC waste pipe for WHB 32mm dia

S &F vitreous china counter type wash basins (Oval/Circular shape) size 600x480mm including cutting for and pinning in ends of brackets or errecting stand white 32mm dia polyethylene fush pipe, PVC connections 15mm size with PTMT nuts of length 600 mm, waste pipe screwd for pipe or connections including necessary packing, union and cap and fixed etc including brackets compete all as specified and as directed

S&F Wash down water closet (Pedestal pattern) (wall mounted type) white with P or S trap including plastic water closet seat & cover mild steel chromium plated or aluminised hinging device, flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for high/low level cistern etc compete all as specified and as directed

S &F vitreous china water closet Squatting Orissa patern white size 580 x 440mm with integral foot rest with P or S trap including, fushing cistern low or high level, 32mm dia polyethylene fush pipe etc compete all as specified (excluding cost of flush tank) including provn of lime concrete bedding fixed compete all as specified and as directed.

S&F CP health faucet with 1 mtr CP tubing covered by CP coated rings

S&F PVC valveless, syphonic action type of 10 liter capacity, flushing cistern,low level, white, with inlet, ball valve, float and handle including brackets and PVC connections of 15mm size with PTMT nuts of length 600 mm etc., complete all as specified and as directed

S&F in Bib taps 15mm bore, cast copper alloy with crutch handle,fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed

S&F in Angle valves (Two way) 15mm bore (surface/concealed), cast copper alloy, fancy type, chromium plated screwed down, high pressure,with crutch or butterfly handle, screwed bothends for iron pipe or for unions and fixed complete all as specified and as directed

S&F Toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws.

S&F Tubular towel rail, aluminium anodised, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed

S&F Soap dish, vitreous China white, approximate size 160x 160x90mm fixed to plugs with chromium plated brass screws complete all as specified and as directed

S&F in Pillar taps 15mm bore, cast copper alloy, with capstan heads,chromium plated,fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed

S&F in Vitreous China urinals, half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement,flush pipe 600mm long, grating and Union for discharge pipe etc complete all as specified and as directed

S&F Urinal spreader of CP for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and as directed

S&F in Vitreous china urinal partition white of size 310x700 mm complete all as specified and as directed

S&F fixing aluminium powder coated (Minimum thickness of powder coating 50 micron) frame for windows/ Doors/Ventilators/Partition with one or more tracks including joining cleats/ channel for fixing glass/ mesh compete all as specified and as directed

S&F Powder coated aluminium window and ventilator shutters, side hung type wthout sash bars, aluminium sections weighing 0.55 kg/m includingnecessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays150mm long (1 no.) hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed

S&F Frosted glass 3mm thick, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specifeid and directed

M&L for Providing precast cement concrete louvres and jallies, 25mm thick in CM 1:6 type B0 1:2:4 (measured solid) compete all as specified and as directed

Material and Labour for Chequered cement concrete tiles 20cm x 20cm/ 30x30cm x 25mm thick, set, jointed and pointed in with grey cement and pigments in floors complete all as specified and directed.

M&L Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested;in cement concrete 1:3:6, Type C2 (using 40mm graded stone aggregate) for 150mm dia pipes complete all as specified and as directed

M&L Rendering 15mm thick with WPC on fair faces of brick work or concrete internal surfaces in CM 1:3 complete all as specified and as directed (WPC will be masured and Paid seperately)

M&L providing cement concrete 1:2:4, type B1 ,using 20 mm graded stone aggregate as in cills, steps, bands, copings, bed plates , etc including necessary form work, all as specified and as directed

M&L for Precast cover slab 1:2:4, type B1 using 20mm graded stone aggregate in landings, cover slabs (for manholes etc.,) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:4 for manholes etc including demolition of existing cover slab all as specified and as directed.

S&F TMT steel bars 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed.

M&L for Reinforced concrete pipes, class NP3, laid and jointed complete with collars all as specified and as directed.

M&L for Loose brocken bricks filling with aggregates of gauge 40 to 80 mm in soakage pits, soakage wells all as specified and as directed.

Excavating in post holes (or similar holes) each not exc 0.5cu m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard/dense soil complete all as specified and directed.

M&L for PCC Type B2 (1:2:4) using 40mm graded stone aggregates as in foundation, filling and mass concrete complete all as specified and as directed.

S&F for Joist, channel, angle,MS Flat or tee sections, fixed independently, without connecting plates, etc. cut to ordinary lengths as in fencing posts complete etc as in chain link fencing posts and struts including cutting tops to shape as directed, drilling holes, notching for wire, etc for securing wire mesh etc, and similar work conforming to Fe-290 Gde E-165 all as specified and as directed

S&F for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified complete all as specified and as directed

Demolition cement concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level) all as specified and as directed

M&L for vitrified ceramic coloured tiles light shade 10 mm thick (square / rectengular) polished area of each tile not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1 :6 in floors etc complete all as specified and as directed.

All as per item No 90 above but in vertical surfaces set set and jointed in neat cement slurry over and including 10mm thick backing coat plaster in cement mortar 1:4, pointed with white/ coloured cement to match complete all as specified and directed

Taking down old cement plaster including racking out joint hacking for keys and scrubbing down with water etc., on wall/ ceiling surfaces and removing the debris from the defence premises complete all as specified and directed.

Material and labour for complete removal of existing treatment (any layers of existing treatment ) from walls/pillars/cornices by scraping down with using steel patti wire/ brush / sand papering , upto entire satisfaction of Engineer-in-charge, remove / scraping down all loose particle, smoke soot, moulds, moss & efflorescent salts etc brooming all dust and preparing the surfaces smooth by applying chalk whitening, preparatory to distempering and after applying two coats of oil bound distemper (washable) over a coat of birla care putty as per approved tint/colour by using electric paint roller or roller brush complete all as specified and as directed

Taking down steel rolling shutters pull and push type not exceeding 14 Sqm of clear opening each including hood cover and cleaning the sides of shutters, suspension shaft and guide channels and greasing al the moving parts of rolling shutters and straining of rolling shaft, tightening and re-fixing the same including hood cover complete all as specified and as directed

Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars, arches etc. but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified.

S&F Anodised aluminium snap grid frame work for false ceiling all as specified Size of grid 605 x 605mm with using 25x25x2mm aluminium T section and 25x2mm aluminium wall angle complete all as specified.

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified.

S&F12 mm Perforated particle board/tiles for insulation and accoustic purposes, 60x60 cm in size, fixedwith nails to timberframework or with staple on snap grid timber/GI/Aluminium framework with screws complete all as specified and as directed

S&F for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooksand hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed

M&L preparation of new steel surfaces of any description, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and as directed

M&L Machine cut kota stone slab flooring 20 -25 mm thick over cement screed based laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polish complete including 20 mm screed bed layed with CM 1 :6 etc complete all as specified and as directed.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, rough finished surfaces all as specified and as directed.

M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions and similar work; vertical or to batter, fair finished surfaces all as specified and as directed.

M&L for Providing RCC in B1, 1:2:4 20mm graded stone aggregate in foundation, including rafts, footing , foundation beams , plinth beams, bases of columns etc,basement slab and mass concret complete all as specified and directed.

M&L for Providing RCC in B1, 1:2:4 20mm graded stone aggregate in Columns, pillars, posts and struts complete all as specified and directed.

M&L for MS Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment all as specified and directed.

S&F mild steel screw bolts (machine made), diameter of shank 11 to 15 mm, with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 10 cm and not exc 15 cm long all as specified and directed.

S & F steel work in tubular trusses, posts including special shaped washer ect. complete using ERW or indluding butt welded tubes conforming to I.S.1161-1998 grade St-240 all as specified and directed.

S&F Structural steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. of Fe 410-W (Gde-E- 250) quality-A complete all as specified and as directed

S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed

Excavation over areas, not exc 1.5 m deep and getting out in soft / loose soils all as specified and as directed.

Material and Labour for 75mm thick plain Cement concrete sub base flooring, type B2, 1:2:4 using 40mm graded stone aggregate complete all as specified and directed.

M&L 100mm thick plain cement concrete type B- 2, 1:2:4 using 20mm graded stone aggregate finishing cement concrete surface even and smooth with Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green all as specified and directed.

Material and labour for precast Solid block Masonry withcement concrete in 1:2:4 type B1 , using 20mm graded stone aggregate solid blocks, exc. 10 cm in width and setting in mortar 1:6 complete all as specified and as directed.

Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound all as specified and as directed.

S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and direction.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and direction.

Supply and fixing 12 mm thick tinted toughend glass, High quality and glazing exc 0.5 sq.m in each pane including CP fancy handle 300 mm on both sides of door, including necessary patch fittings, including aluminium frame and coloured etching glass with approved design/pattern, all as specified and as directed.

Taking down chowkats/Frames of area exc 1.5 Sqmand not exc 4.00 sq.m with shutter (without taking off shutters from the frame) each all as specified and as directed.

S&F for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed.

S&F for Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre,including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish complete all as specified and as directed. (Note: Frame work for ceiling shall be measured and paid separately)

S&F Stainless steel wire mesh of nominal dia of wire 0.36mm and average width of aperture 1.40mm including wooden fillets / beadings, screws etc complete all as specified and as directed.

M&L preparation of old decorated surfaces of walls, pilasters including cornices and applying one coat of Oil Bound Distemper washable complete all as specified and as directed.

M&L preparation of old decorated surfaces of ceiling and applying one coat of white wash evenly complete all as specified and as directed.

Material and labour for complete removal of existing treatment of walls/pillars /cornices, including Washing, rubbing down preparing the surfaces applying two coats of weather proof exterior emulsion paint wheather coat Apex, 100% exterior grade), as per existing or as approved tint/colour complete all as specified and as directed

M&L sand filling under paver blocks including watering and consolidation all as specified and as directed

M&L rubber mould machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigment all as specified and as directed

M&L for Point wiring complete with 1.5sqmm single core PVC FRLS insulated sheathed 1100 volts grade copper conductor single core multi stranded drawn through PVC consealed conduit on walls, suface on ceiling etc., with suitable clamps/ shaddles, including provision of 1.6 mm thick MS pressed steel terminal boxs concelled/surface in wall with 3 mm thick hylam sheet for housing switiches, sockets, fan regulators etc., including one run of 1.5sqmm PVC insulated copper conductor for continious earth wire and connected to common earth dolly complete all as specified and directed for for One light point / fan point controlled by one 5 Amps switch.

All as per Sl.item No. 130 above but for one exhaust fan point controlled by one way switch.

S&F Switch piano 5 Amps flush type single pole one way 230V all as specified and directed.

S&F ceiling rose bakellite 65x50mm 3 terminals all as specified and directed.

S&F MCB DB SPN double door, 4 way 240 V with 200 Amp rated bus bar neutral link, eath link all as specified and directed.

S&F MCB SP 5 to 32 Amp, 10KA 'B' curve 240V all as specified and directed.

S&F MCB SPN 32 Amp, 10KA 'C' curve 240V all as specified and directed.

S&F LED light fittings 1x20W decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F LED street light fittings 25W ,230V AC out door type with high pressure die cast aluminium housing and heat resistant complete with driver , lamp brakets with impact and corrossion resistant including thermal management in multi optics complete with IP 65/66 complete all as specified and directed.

M&L GI bracket 1.5m long made out of 40mm medium grade pipe , bend to shape required including suitable MS clamps , nut & bolts etc complete for fixing security light all as specified and directed.

S&F Exhaust fan steel body 300mm sweep with louvers, single phase 23V including making holes in the wall and making good as directed after fixing the fan and louvers etc complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 600X600X6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5M below normal ground level connected to GI earth lead wire 4.0mmdia by means of nuts, bolts, check nuts and washer of GI steel and connecting to testing point including provision of test point and all as shown in electrical plate No. 3 of SSR Pt I. The work shall inclusive of necessary earth work and PCC chamber 1:3:6 in type CI with 8mm CTD bar reinforcement both ways at 140 mm bents to centre complete all as specified and directed.

Supply and laying XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric cable heavy duty with aluminium conductor 1100 volts , 2 core 6 sqmm in trenches/ on pole / wall with MS clamps etc all as specified and directed.

Supply and laying XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric cable heavy duty with aluminium conductor 1100 volts , 2 core 10 sqmm in trenches/ on pole/ wall with MS clamps etc all as specified and directed.

S&F SMC box of size 700mm x 480mm x 210mm ( Inner dimension) with double door with 6mm thick backlite sheet mounted on the fabricated MS angle 40x40x6mm , painted with two two coats of synthetic enamel paint over a coat of red oxide primer , mounted at a height of 30CM from the GLcomplete all as speficied and as directed.

S&F Switch socket combination 2 in 1 , 3 pin 5 and 15 Amp flush type including suitable gang box complete all as speficied and as directed.

Supply, lay in trenches burnt Bricks, old size, Sub class "B" for cable protection all as specified and directed.

Supply and fix, in replacement of MCB DB SPN, double door, 4 way 240 V neutral link, earth link all as specified and directed..

RAVI ENTERPRISE (BID ID -3127314)