GE 861 EWS-38/2023-24

Amount

Taking down cement plaster from brick or concrete or stone surfaces including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.

Taking down chowkhats or frame with shutter (without taking off shutter from the frame) not exc 1.5 Sqm each including cutting holes for taking out hold fast and making good disturbed surface with existing surface, complete all as specified and directed.

Taking down chowkhats or frame with shutter (without taking off shutter from the frame) exc 1.5 Sqm but not exc 4.0 Sqm each including cutting holes for taking out hold fast and making good disturbed surface with existing surface, complete all as specified and directed.

Taking down shutter of any description not exc 1.0 Sqm each including cutting holes for taking out hold fast etc, complete all as specified and directed.

Taking down shutter of any description exc 1.0 Sqm but not exc 2.00 Sqm each including cutting holes for taking out hold fast etc, complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors & paving n.exc 15 cm thick (below or above ground level) complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store complete all as specified and directed.

Demolition of cement reinforced concrete (reinforcement cut as required to facilitate demolition) in ground floors & pavings n.exc 15 cm thickness (below or above ground level), complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connection, including cleaning for refixing or removal from site, complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connection, including cleaning for refixing or removal from site, complete all as specified and directed.

M&L for brick work with sub class "B" bricks (old size) straight or curved on plan exceeding 6 metre mean radius, built in cement mortar 1:4, complete all as specified and directed.

All as per item No 12 here-in-before but except bricks.

M&L for rendering 10mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished the surface even and fair without using extra cement, complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:6 on other than fair faces brick work or concrete surfaces, finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 5 mm thick in cement mortar 1:3 finishing on brick or concrete surfaces finished even & smooth without using extra cement in ceiling complete all as specified and directed.

Flush pointing to random rubble, uncoursed or brought upto courses masonry in cement mortar 1:4 including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for precast cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in landings, cover slabs (for man holes/ septic tanks etc) and similar articles with plain faces, set in cement mortar 1:4, complete all as specified and directed.

M&L for RCC 1:2:4 (using 20mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns in floors etc and the like, complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregate) as in floor to receive floor finishes, complete all as specified and directed.

Formwork to rough finished concrete surfaces of soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed.

M&L for TMT mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

M&L for vitrified ceramic dark shade coloured tiles, 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, laid over and incuding 15mm thick screed bed or bedding layer in cement mortar 1:4, complete all as specified and directed.

M&L for 10mm thick vitrified ceramic coloured tiles (Granite /Marble /wood textures), fixed on vertical surfaces over and including 10mm thick plaster in cement mortar 1:4 for receiving tiles, set and jointed in neat cement slurry and pointed in white or colored cement to match the shade of tiles, complete all as specified and directed.

M&L for non skid coloured ceramic joint free tiles, 7-8 mm thick, area of each tile exc 0.11 sqm but n exc 0.18 sqm (sqare/rectangular), as in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tile, laid/ fixed over and including 15mm thick sceerd bed or bedding layer in cement mortar 1:4, complete all as specified and directed.

M&L for non skid coloured ceramic joint free tiles 7-8 mm thick, area of each tile exc 0.06 sqm but n exc 0.11 sqm (sqare/rectangular), as in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tile, laid/ fixed over and including 15mm thick sceerd bed or bedding layer in cement mortar 1:4, complete all as specified and directed.

M&L for glazed ceramic coloured joint free tiles of size 300mm X 200mm X 7mm thick as on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, fixed over and including 15mm thick plaster in cement mortar 1:4, complete all as specified and directed.

M&L for glazed ceramic coloured joint free tiles of size 350mm X 250mm X 7mm thick or 450mm X 350mm X 7mm as on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, fixed over and including 15mm thick plaster in cement mortar 1:4, complete all as specified and directed.

Glass dividing strips, 38mm wide 3mm thick, inserted in position, conform to design, complete all as specified and directed.

Plain cement concrete M-10, 1:3:6, type C-2, using 40mm graded mechanically crushed stone aggregate, 50mm thick, as in plinth protection etc., surface finished even and smooth without using extra cement and laid to a slope of 1 in 24 in alternate panels n.exc. 1.20 Sqm each, 12mm wide and 5 cms deep joints shall be formed between the bays and shall be filled with mastic filling comprising a mixture of one part of heated blown bitumen VG-10 and two parts of heated coarse sand (by volume), all as specified and directed. Note:- The unit rate include for use of form work (straight or curved).

M&L for 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed at site, complete all as specified and directed.

S&F 35mm thick 2nd class hard wood plain framed panelled shutters (any no. of panels) with panels of timber flat on both sides (feathered edge) or veneered particle board with commercial face venners supplied and fitted to chowkats at site, complete all as specified and directed.

S&F 35mm thick 2nd class hard wood glazed & skeleton shutters for door, open rebated and prepared to receive glass, gauge etc. (with sash bars) edges of framing plain, chamfered or rounded , fitted with cuts and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part- I Section -8 Clause 8.23 (a), complete all as specified and directed.

S&F 30mm thick 2nd class hard wood glazed & skeleton shutters for windows/ ventilators, open rebated and prepared to receive glass, gauge etc, divided into square with plain, chamfered or rounded , mitred and rebated sash bars any numbers, provided with stiles and rails as specified in SSR Part- I Section-8 Clause 8.24 (b), complete all as specified and directed.

S&F solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and directed.

S&F 30mm thick factory made solid panel PVC door shutter (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed.

S&F 300mm long aluminium alloy anodised sliding door bolt with hasp and stapple (bolt type) and fixing clips of sheet cast or extruded section with fixing bolts and sliding bolt of extruded section, complete all as specified and directed.

S&F aluminium anodised, barrel tower bolt of extruded section, 200mm length of bolt, complete all as specified and directed.

S&F in repair aluminium anodised, barrel tower bolt of extruded section, 200mm length of bolt, complete all as specified and directed.

S&F aluminium anodised, barrel tower bolt of extruded section, 150mm length of bolt, complete all as specified and directed.

S&F in repair aluminium anodised, barrel tower bolt of extruded section, 150mm length of bolt, complete all as specified and directed.

S&F aluminium anodised handle, extruded fabricated type of size 150mm, complete all as specified and directed.

S&F in repair aluminium anodised handle, extruded fabricated type section of size 150mm, complete all as specified and directed.

S&F aluminium anodised handle, extruded fabricated type section of size 100mm, complete all as specified and directed.

S&F in repair aluminium anodised handle, extruded fabricated type section of size 100mm, complete all as specified and directed.

S&F butt hinges medium weight, cold rolled mild steel, size 100mm, complete all as specified and directed.

S&F in repair butt hinges medium weight, cold rolled mild steel, size 100mm, complete all as specified and directed.

S&F butt hinges medium weight, cold rolled mild steel, size 75mm, complete all as specified and directed.

S&F in repair butt hinges medium weight, cold rolled mild steel, size 75mm, complete all as specified and directed.

S&F ordinary rat tail rod pattern springs, brass, 300 mm size, including roller and roller plate, complete all as specified and directed.

S&F in repair ordinary rat tail rod pattern springs, brass, 300 mm size, including roller and roller plate, complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, of size 150mm, complete all as specified and directed.

S&F in repair floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, of size 150mm, complete all as specified and directed.

M&L 4mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares n.exc 0.5 Sqm in each pane including hacking out old broken glasses of any thickness, size/quality from wooden or steel frames glazed with old putty or fixed with beads, complete all as specified and directed.

M&L 4mm thick figured glass pin headed type and glazing with oil putty or fixed with bead/glazing pins in squares n.exc 0.5 Sqm in each pane including hacking out old glass panes, complete all as specified and directed.

S&F galvanised MS wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed with tinned tacks or galvanised wire staples, complete all as specified and directed.

S&F in repair galvanised MS wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed with tinned tacks or galvanised wire staples, complete all as specified and directed.

Steel water tubing, 15mm bore, galvanised, "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, complete all as specified and directed.

All as per item No 58 here-in-before but fixing only.

Steel water tubing, 20mm bore, galvanised, "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, complete all as specified and directed.

All as per item No 60 here-in-before but fixing only.

S&F in repair vitreous china squatting pan, orissa pattern of size 580mm x 440mm with integral foot rests, white and connecting to drain pipe/ trap and including provision of cement concrete and making good to floor match with existing floor, complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white complete including ‘P’ or ‘S’ trap , seat cover and fixing to flushing cistern, brackets, flushing pipe etc., complete all as specified and directed.

S&F in repair vitreous china urinals, bowl type 465x355x265 mm white (back to cornor wall type), providing & fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with flush pipe, grating and union for discharge pipe and 60mm long brass screws, pointing around urinal back in cement (exclusive of fixing pipe to flushing cistern, trap and waste pipe), complete all as specified and directed.

S&F in repair vitreous china wash hand basin, white, flat back, size 550 x 400 mm with brackets, including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed. (Including 15mm bore CP pillar tap, waste coupling and PVC waste pipe), complete all as specified and directed.

S&F in repair 10 litre capacity PVC valveless, low level, synphonic action type, flushing cistern, with inlet, ball valve, float valve, handle including brackets, complete all as specified and directed.

S&F grating doom 125mm dia with waste hole of PTMT, complete all as specified and directed.

S&F in repairs 15mm size PVC connection with PTMT nuts of 600mm long, complete all as specified and directed.

S&F in repairs 15mm size PVC connection with PTMT nuts of 450mm long, complete all as specified and directed.

S&F 100mm cast iron sanitary connection for WC, complete all as specified and directed.

S&F in repairs for cast iron 75mm bore soil, waste and vent spun pipes in any length with or without ears, with cement joints, laid in trenches or in floor etc., complete all as specified and directed.

&F in repairs for cast iron 100mm bore soil, waste and vent spun pipes in any length with or without ears, with cement joints, laid in trenches or in floor etc., complete all as specified and directed.

S&F in repairs 75mm dia CI floor trap, with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1, complete all as specified and directed.

S&F in repair cast iron nahani trap 75mm dia including jointing to pipe, complete all as specified and directed.

S&F in repairs cast iron 75mm bore bends (any radius) diminishing pieces or tapers etc., complete all as specified and directed.

S&F in repairs 100mm bore cast iron cowls, complete all as specified and directed.

S&F in repairs swivel shower of PTMT any colour with arm, 195mm long with bend of 45 degree with flange, complete all as specified and directed.

S&F in repairs bib tap 15mm PTMT any colour high pressure screwed down for iron pipe and fixed, complete all as specified and directed.

S&F in repairs 15mm bore CP bib taps, fancy type, cast copper alloy with crutch or butterfly nuts, handle, screwed down for iron pipe, complete all as specified and directed.

S&F in repairs 15mm bore CP stop/angle valve, fancy type cast copper alloy screwed down, high pressure with crutch or butterfly handle, complete all as specified and directed.

S&F in repairs 15mm bore CP stop/angle valve with long shank and cup (concealed type), fancy type, cast copper alloy screwed down, high pressure, complete all as specified and directed.

S&F in repairs 15mm bore pillar tap chromium plated fancy type cast copper alloy with crutch or butter fly handle, screwed down for iron pipe and fixed, complete all as specified and directed.

S&F in repair15 mm bore brass CP mixer for mixing hot and cold water screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes, complete all as specified and directed.

S&F in repair health faucet CP Brass hand Jet Shower 15mm bore dia and 1500mm long CP pipe complete all as specified and directed.

S&F in repair 20mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed, complete all as specified and directed.

S&F in repair 20 mm bore gun metal globe or gate valve with iron wheel head screwed head both for iron pipe & fixed, complete all as specified and directed.

S&F in repairs 20mm dia tubular towel rail, aluminium anodised, D type, 60 cm long between flanges, complete all as specified and directed.

S&F in repairs 25mm dia harrison rails, mild steel, chromium plated, decorative type, with 02 Nos wood finished side brackets/fenals for each curtain rod, complete all as specified and directed. all as specified and directed.

S&F in repairs 110mm bore dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors etc, complete all as specified and directed.

S&F in repairs 75mm bore dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors etc, complete all as specified and directed.

110mm bore dia PVC (SWR) bends, complete all as specified and directed.

75mm bore dia PVC (SWR) bends, complete all as specified and directed.

110mm bore pipe PVC (SWR) vent cowl and fixed, complete all as specified and directed.

75mm bore pipe PVC (SWR) vent cowl and fixed, complete all as specified and directed.

Preparation of new plastered surfaces of wall to receive 3mm thick wall care putty and applying two coats of oil bound distemper over a coat of primer, complete all as specified and directed.

Preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash,complete all as specified and directed.

Complete removal of existing treatment of walls and applying two coats of cement base paint over a coat of alkali-resistant priming coat, complete all as specifed and directed.

Complete removal of existing treatment of walls and applying two coats of oil bound distemper over a coat of priming coat and 3mm wall care putty, complete all as specifed and directed.

Complete removal of existing treatment of ceiling and applying two coats of white wash, complete all as specified and directed.

Preparation of new wooden surfaces of any description not otherwise described, exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed.

Preparation of old painted wooden surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint to match the existing surface, complete all as specified and directed.

Preparation of old painted steel surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including unscrewing from board fitting and fixture such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody for reuse if serviceable or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

Point wiring for one light point/fan point/bell point controlled by one switch with 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core multi strand flexible cable maintaining colour coding (Phase- Red/yellow/Blue, Neutral- Black) and 1.5 sqmm PVC insulated unsheathed copper conductor single core cable (green color) as earth lead in and including PVC casing and capping/Conduit medium grade of suitable size run on wall/surface with all fittings (ISI Marked) controlled by one switch including CI/MS sunk box of required size or PVC Gang Box with 3mm thick plastic laminated sheet cover of adequate size for one light point/fan point controlled by one switch and making good disturbed surfaces with cement mortar 1:3 to match with the existing surface, complete all as specified and directed.

All as per srl item No 104 here-in-before but for one 5 pin 5A socket outlet independent controlled by one switch, complete all as specified and directed.

All as per srl item No 104 here-in-before but for one 5A socket outlet on the same board controlled by one switch, complete all as specified and directed.

All as per serial item No 104 here-in-before but for 5 pin 15 Amps socket outlet independent board with 2.5 sqmm PVC FRLS insulated unsheathed copper conductor single core multi strand flexible cable and 2.5 Sqmm PVC FRLS insulated unsheathed copper conductor single core cable (green color) as earth lead, complete all as specified and directed.

Switch piano flush button types 6 Amp, single pole, one way complete all as specified and directed.

S & F in repair bed switch 6 Amp, single pole, one way complete all as specified and directed.

Switch socket combination box type 2 in 1, 5 pin, 6 Amp, flush type, universal, complete all as specified and directed.

Switch socket combination box type 2 in 1, 5 pin, 6 and 16 Amp, flush type universal, complete all as specified and directed.

S&F in repair switch socket combination box type 2 in 1, 5 pin, 6 and 16 Amp, flush type universal, complete all as specified and directed.

Lamp holder, PVC/ Polycarbonate type with back plate, straight/ angular suitable for batten fittings, complete all as specified and directed.

Ceiling rose 3 terminal bakelite 65mm x50mm surface type, PVC/ Polycarbonate, isolated body, complete all as specified and directed.

Bell push, flush type, 6 Amp, 230 volts, complete all as specified and directed.

Call bell , ding dong AC single phase, 230 volts 50 Hz including wooden/ PVC board of suitable size, connecting and testing, complete all as specified and directed.

Stepped type electronic fan regulator flush type, AC 230 volts, duly ISI marked including connector on the existing sheet etc. as reqd., complete all as specified and directed.

20W wall/surface mounted LED lights fitting, 220V, AC, engineering plastic batten with white acrylic cover complete with driver and all accesspories including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete including fixing on wall/ceiling with PVC round/square block-02 Nos and taking down old, complete all as specified and directed.

10W wall/surface mounted LED lights fitting, 220V, AC, engineering plastic batten with white acrylic cover complete with driver and all accesspories including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete including fixing on wall/ceiling with PVC round/square block-02 Nos and taking down old, complete all as specified and directed.

15watt 220 volts AC round shape recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete including taking out old, complete all as specified and directed.

12watt 220 volts AC round shape recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete including taking out old, complete all as specified and directed.

36 watt LED luminaire 600 mm x 600 mm, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete including taking out old, complete all as specified and directed.

S & F in repair LED lamp 9 W, complete all as specified and directed.

Supply & fixing in repair MCB distribution board , 240 volts single pole and neutral , double door, sheet steel, enclosure powder coated with 200 Amps rated copper busbar with neutral link, 12 ways, IP-43 protection, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection and making good disturbed surfaces of walls etc, including two coats of white/colour washing/distempering etc to match the existing surface, complete all as specified and directed.

Supply & fixing in repair MCB distribution board , 240 volts single pole and neutral , double door, sheet steel, enclosure powder coated with 200 Amps rated copper busbar with neutral link, 8 ways, IP-43 protection, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection and making good disturbed surfaces of walls etc, including two coats of white/colour washing/distempering etc to match the existing surface, complete all as specified and directed.

Supply & fixing in repair MCB distribution board , 240 volts TPN vertical type, double door, sheet steel, enclosure powder coated with 200 Amps rated copper busbar with neutral link, 4 ways, IP-43 protection, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection and making good disturbed surfaces of walls etc, including two coats of white/colour washing/distempering etc to match the existing surface, complete all as specified and directed.

MCCB 4 pole, 415 volts adjustable type, 63 Amps with breaking capacity 16 KA, complete all as specified and directed.

MCB, SP, AC, 240 volts "C" series capacity of 06 to 32 Amps, 10kA and making connections, complete all as specified & directed.

MCB, SPN, AC, 240 volts "C" series capacity of 32 Amps, 10kA and making connections, complete all as specified & directed.

MCB, SPN, AC, 240 volts "C" series capacity of 63 Amps, 10kA and making connections, complete all as specified & directed.

MCB TPN 415 volts, 40 Amps "C" series 10 kA capacity, complete all as specified and directed.

Sub main wiring with two single core PVC insulated flexible copper conductor cable of size 4sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 4sqmm as earth lead in & including PVC casing capping, medium grade, 25mm thickness, ISI marked with all neccessary accessories like PVC elbow, tee etc. incl taking down old unsv, complete all as required at site or directed.

Sub main wiring with two single core PVC insulated flexible copper conductor cable of size 6sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 6sqmm as earth lead in & including PVC casing capping, medium grade, 25mm thickness, ISI marked with all neccessary accessories like PVC elbow, tee etc. incl taking down old unsv, complete all as required at site or directed.

Supply and laying in repair 1100 volts grade heavy duty cable PVC insulated aluminium conductor (stranded), served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular of size 16.0 sqmm, complete all as specified and directed.

Supply and laying in repair 1100 volts grade heavy duty cable PVC insulated aluminium conductor (stranded), served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular of size 10.0 sqmm, complete all as specified and directed.

Supply and laying in repair 1100 volts grade heavy duty cable PVC insulated aluminium conductor (stranded), served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular of size 6.0 sqmm, complete all as specified and directed.

Supply & fixing in repair PVC Gang box surface type suitable for fixing of 5 pin 15 Amp multipurpose switch socket on wall complete all as specified and directed.

Supply & fixing in repair PVC Gang box surface type suitable for fixing of 5 pin 5 Amp multipurpose switch socket on wall, complete all as specified and directed.

Supply & fix in repair medium grade PVC casing and capping of size 20 mm dia, exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc, complete all as specified and directed.

Supply and fixing in repair, Plug top 3 pin 5/6 amps 230 volts, complete all as specified and directed.

Supply and fixing in repair Plug top 3 pin 15/16 amps 230 volts, complete all as specified and directed.

Disconnectiong, taking down, strip opening, cleaning all parts and packing of exhaust fan of any make and size & greasing ball bearing with specified quality grease & recommisioning the same including making new electric flexible wire connection, complete all as specified and directed. Note: Replacement of spare parts, rewinding, painting etc to be measured and paid separately.

Disconnectiong, taking down, strip opening, cleaning all parts and packing of ceiling fan of any make and size & greasing ball bearing with specified quality grease & recommisioning the same including making new electric flexible wire connection, complete all as specified and directed. Note: Replacement of spare parts, rewinding, painting etc to be measured and paid separately.

Painting of ceiling fans complete of any size and make, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. including marking MES unit name at bottom of the fan with black paint, complete all as specified and directed.

Painting of exhaust/air circulated fans complete of any size and make, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. including marking MES unit name at bottom of the fan with black paint, complete all as specified and directed.

Replacement of short circuit/over-heated windings from starter of ceiling fan of any make having 1200mm sweep with matching guage & turns of super enamelled copper winding wire complete with leathered paper, glass sleeves, varnishing, baking, heating, drying, cleaning fan bearing/bushes, greasing, oiling and reassembling of fan with testing etc, complete all as specified and directed.

Replacement of short circuit/over-heated windings from starter of exhaust fan of any make having 300mm/450mm sweep with matching guage & turns of super enamelled copper winding wire complete with leathered paper, glass sleeves, varnishing, baking, heating, drying, cleaning fan bearing/bushes, greasing, oiling and reassembling of fan with testing etc, complete all as specified and directed.

Replacement of gun metal bush with suitable size for ceiling fan any make, any size and any sweep, complete all as specified and directed.

Replacement of ball bearing suitable for 1200mm/1400mm sweep ceiling fan of any size any make, complete all as specified and directed.

Replacement of canopy (top & bottom) of ceiling fans of any make/size with matching colour, complete all as specified and directed.

Replacement of rubber reel, heavy duty for hanging ceiling fans of any make/size with nuts, bolts, split pins etc., complete all as specified and directed.

Replacement of approved quality connector block of ceiling fans of suitable size, complete all as specified and directed.

Replacement of capacitor 2.5 mfd AC 230 volts 50 Hz, complete all as specified and directed.

Replacement of 1200mm sweep ceiling fan blade ISI make, made of aluminium alloy duly painted and air dynamic angled including provision of screws for fixing purpose, complete all as specified and directed.

Replacement of hanger clamp assembly of down rod for hanging of ceiling fan of ceiling fans with nuts, bolts, split pins etc., complete all as specified and directed.

Replacement of ball bearing suitable for 300mm/450mm sweep exhaust fan, complete all as specified and directed.

Replacement of capacitor 3.15 mfd AC 230 volts 50 Hz, complete all as specified and directed.

Replacement of exhaust fan blade, heavy duty 300/380mm sweep complete all as specified and directed.

Replacement of exhaust fan blade, heavy duty 450/600mm sweep complete all as specified and directed.

Taking down carefully geyser 25/35/50 liters capacity from wall after unscrewing nuts/bolts etc. and again refixing in position after necessary repair and replacement of spare parts including testing etc complete all as specified and directed. Note: Spare parts shall be measured and paid for separately under respective items.

Replacement of heating element AC 230 Volt of rating 1500W ISI mark as per existing any type, complete all as specified and directed.

Replacement of heating element AC 230 Volt of rating 2000W ISI mark as per existing any type, complete all as specified and directed.

Replacement of thermostat switch AC 230 Volt adjustable range from 0-90 degree Celsius, complete all as specified and directed.

Replacement of flexible PVC connection pipe heavy duty suitable for hot water to bear the temperature 100 degree Celsius with out let and inlet connection brass adaptor and PVC washer having size 450 mm long 15 mm nominal dia complete all as specified and directed.

Replacement of indicator lamp round/square in shape suitable for 25-50 ltr storage type water heater as per sample 230 volt, complete all as specified and directed.

Replacement of auto-cut switch suitable for geyser 25-50 ltrs 230 volts AC all as per sample, complete all as specified and directed.

Replacement of geyser assembly suitable for geyser 25-50 ltrs 230 volts AC all as per sample, complete all as specified and directed.

BHAT CONSTRUCTIONS AND BUILFERS

M/S MAHIR MUNEER